知识与资讯
专业词汇
 
中国国家标准
发布时间:2011-7-20 12:16:00||  点击:46183次||  文章分类:专业词汇||  发布人:翻译家(Fanyijia.com)


-
 

 

公路路线标识规则 命名、编号和编码 Mark rules of highway route naming number and coding
公路路线标识规则 国道名称和编号 Mark rules of highway route name and number of national trunk highway
信封 Envelopes
逐批检查计数抽样程序及抽样表 (适用于连续批的检查) Sampling procedures and tables for lot-by-lot inspection by attributes (Apply to inspection of successive lots or batches)
周期检查计数抽样程序及抽样表 (适用于生产过程稳定性的检查) Sampling procedures and tables for periodic inspectionby attributes ( Apply to inspection of stability for productive process)
统计学术语 第一部分 一般统计术语 Terms for statistics--Part 1: Terms for general statistics
统计学术语 第二部分 统计质量控制术语 Terms for statistics--Part 2: Terms for statistical quality control
统计学术语 第三部分 试验设计术语 Terms for statistics--Part 3: Terms for experimental design
数据的统计处理和解释 统计容许区间的确定 Statistical interpretation of data--Determination of a statistical tolerance interval
数据的统计处理和解释 均值的估计和置信区间 Statistical interpretation of data--Estimation of the mean--Confidence interval
数据的统计处理和解释 在成对观测值情形下两个均值的比较 Statistical interpretation of data--Comparison of two means in the case of paired observations
常规控制图 Shewhart control charts
航海常用名词、术语及其代 (符) 号 Navigation terms and symbols in common use
工业企业厂内铁路、道路运输安全规程 Safety regulation for railway and road transportation in plants of industrial enterprises
数据的统计处理和解释 正态性检验 Statistical interpretation of data Normality tests
正态分布完全样本可靠度单侧置信下限 One-sided reliability confidence lower limit (Normal distribution complete sample)
带警戒限的均值控制图 Control charts for arithmetic mean with warning limits
计数型累积和图 Cusum charts for counted/attributes data
故障树名词术语和符号 Terms and symbols of fault tree
为估计批 (或过程) 平均质量选择样本大小的方法 Choice of sample size to estimate the average quality of a lot or process
消费品使用说明 总则 Instructions for use of products of consumer interest--General principles
城市公共交通常用名词术语 Common terms of urban public transport
道路交通标志和标线 Road traffic signs and markings
城市公共交通标志 公共交通总标志 Marks for urban public transport--General mark for public transport
城市公共交通标志 公共汽车标志 Marks for urban public transport--Mark for bus
城市公共交通标志 无轨电车标志 Marks for urban public transport--Mark for trolleybus
城市公共交通标志 快速有轨电车标志 Marks for urban public transport--Mark for light rail rapid transit
城市公共交通标志 地下铁道标志 Marks for urban public transport--Mark for subway
城市公共交通标志 缆车(索道)标志 Marks for urban public transport--Mark for cable car
城市公共交通标志 城市出租汽车标志 Marks for urban public transport--Identification mark for taxi
城市公共交通标志 城市轮渡标志 Marks for urban public transport--Mark for urban ferry
城市公共交通标志 运行线路图形符号 Marks for urban public transport--Graphic symbols for circulation line
城市公共交通标志 禁令和一般标志 Marks for urban public transport--Marks for prohibition and general
城市公共交通标志 公共汽车、无轨电车、有轨电车站牌 Marks for urban public transport--Stop board of bus and trollybus and tramcar
城市公共交通标志 快速有轨电车站牌 Marks for urban public transport--Stop board for light rail rapid transit
城市公共交通标志 公共汽车、无轨电车、有轨电车路牌 Marks for urban public transport - Line number plate of bus, trolley bus and tram
内河助航标志 Aids to navigation on inland waterways
内河助航标志的主要外形尺寸 The main dimensions of aids to navigation on inland waterways
不合格品率的计量抽样检查程序及图表(适用于连续批的检查) Sampling procedures and charts for inspection by variables for percent nonconforming(Applied to inspection of successive lots or batches)
测试方法的精密度 通过实验室间试验确定标准测试方法的重复性和再现性 Precision of test methods--Determination of repeatability and reproducibility for a standard test method by interlaboratory tests
数据的统计处理和解释 I 型极值分布样本异常值的判断和处理 Statistical interpretation of data--Detection and handling of outlying observations in the sample of type I extreme value distribution
通用控制图 Universal control chart
潜水焊工考试规则 Regulations for the qualification test of diver-welders
可信性管理 第2部分: 可信性大纲要素和工作项目 Dependability management-Part 2: Dependability programme elements and tasks
铁路客运服务图形标志 Pictograns used in railway passenger service
评价企业合理用水技术通则 General principles for evaluating the rational utilization of water in enterprises
铁路货运术语 Terminology for railway freight traffic
运输船舶燃油消耗量--长江船舶计算方法 Fuel oil consumption of transportation ships--Computation methord for changjiang ships
运输船舶燃油消耗量 内河船舶计算方法 Fuel oil consumption for transportation ships--Calculation method for inland ships
计数序贯抽样检查程序及表 Sequential sampling procedures and tables for inspection by attributes
单水平和多水平计数连续抽样检查程序及表 Single and multi-level continuous sampling procedures and tables for inspection by attributes
不合格品率的计量标准型一次抽样检验程序及表 Single sampling procedures and tables for inspection having desired operating characteristics by variables for percent nonconforming
平均值的计量标准型一次抽样检验程序及抽样表 Single sampling procedures and tables for inspection having desired operating characteristics by variables for mean value
数据的统计处理和解释 Г分布 (皮尔逊Ⅲ型分布) 的参数估计 Statistical interpretation of data--Parameter estimation for gamma distribution (Pearaon Ⅲ distribution)
数据的统计处理和解释 指数样本异常值的判断和处理 Statistical interpretation of data--Detection and handling of outlying observations in exponential sample
价值工程 基本术语和一般工作程序 Value engineering--General terms and work program
公路运输术语 Highway transportation terminology
港口装卸术语 Terms for port cargo handling
联运企业货物运输工作质量评价指标 Evaluation indices of freight traffic quality in through transportation enterprise
铁路行车组织名词术语 Terminology for train operation
铁路编组站改编能力计算方法 (三级三场) Calculated methods of sorting capacity for railway marshalling station (3-stage/3-yard)
利用随机数骰子进行随机抽样的方法 Methods for random sampling by utillzing dices of random number
铁路站内道口信号设备技术条件 Technical specification for crossing signal equipment within the station
铁路区间道口信号设备技术条件 Technical specification for crossing signal equipment in wayside
铁路信号技术中采用电子元器件时应遵循的主要安全条件 The more important safety conditions to be observed in the use of electronic components in railway signalling techniques
水运商务名词术语 Terminology for water transport commercial
邮政设备词汇 Postal epuipment vocabulary
邮政通信网术语 Terminology of postal network
海上运输船舶安全开航技术要求 总则 Technical requirements for safety of commencing a sea voyage of sea going transport ships - General rules
海上运输船舶安全开航技术要求 甲板部 Technical requirements for safety of commencing a sea voyage of sea going transport ships - Deck department
海上运输船舶安全开航技术要求 轮机部 Technical requirements for safety of commencing a sea voyage of sea going transport ships - Engineering department
集装箱进出港站检查交接要求 The rule for inspection and exchange of container of port or station for in or out
集装箱港口装卸作业安全规程 The safe rules for handling in container port
正态分布变差系数置信上限 Upper confidence limits of coefficient of variation for normal distribution
船舱内非危险货物产生有害气体的检测方法 Detection methods for harmful gas evolved from non-dangerous cargo in holds
腐蚀数据统计分析标准方法 Standard practice for applying statistics analysis of corrosion data
企业水平衡与测试通则 The general principles of water balance and testing in enterprises
宾馆、饭店合理用电 The rationality of electricity usage in guesthouse and hotel
工业产品质量分等导则 Directives for the grading of industrial product quality
铁路编组站到发线通过能力计算方法 (三级三场) Calculated methods of carrying capacity for receiving and dispatching tracks at railway marshalling station(3-stage/3-yard)
不合格品率的计数标准型一次抽样检查程序及抽样表 Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming
跳批计数抽样检查程序 The procedures for skip-lot sampling inspection by attributes
不合格品率的小批计数抽样检查程序及抽样表 Sampling procedures and tables for inspection of small lots or batches by attributes for percent nonconforming
铁路旅客运输组织术语 Terminology for railway passenger transport
质量成本管理导则 Guide to management of quality related costs
产品质量等级品率的确定和计算方法 Methods for determination and calculation of quality grading rate of products
质量损失率的确定和核算方法 Methods for determination and accounting of quality failure rate
酒家酒店分等定级规定 Classification and granding directives for restaurants and hotels
抽样检查导则 Guide for sampling inspection
挑选型计数抽样检查程序及抽样表 Rectifying sampling procedures and tables for inspections by attributes
联运术语 Terminology of combined transport
粒度均匀散料抽样检验通则 General rules for sampling inspection of bulk materials with uniform size
内河交通安全标志 总则 Traffic safety signs on inland waterways--General principles
内河交通安全标志 标志 Traffic safety signs on inland waterways--Signs
内河交通安全标志配备与安装 Traffic safety signs on inland waterways--Layoff and mounting
劳动定额术语 Terminology of work quota
铁路货场设备使用能力的计算 Calculation of utilized capacity of freight yard equipment
产品质量监督计数抽样程序及抽样表 (适用于每百单位产品不合格数为质量指标) Sampling procedures and tables for product quality audit(Apply to inspection by attributes for nonconformities per hundred units)
工时消耗分类、代号和标准时间构成 Classification of working-hours consumption symbolsand composition of standard time
工业产品保证文件 生产者就其出口产品合格的声明 Manufacturer's declaration of export product conformity with standards
旅游涉外饭店星级的划分及评定 Star-rating standard for tourist hotels
板材成捆运输技术要求 Specification for unit load transport of plate wood
危险货物运输 爆炸品分级程序 Transport of dangerous goods--Specification on the classification procedure for explosives
危险货物运输 爆炸品分级试验方法和判据 Transport of dangerous goods--Test method and criteria of classification for explosives
贸易单证样式 Layout key for trade document
贸易单证中代码的位置 Location of codes in trade documents
工业产品保证文件 总则 General principles of industrial product guarantee documents
产品质量监督计数一次抽样检验程序及抽样方案 Single sampling procedures and tables by attributes for product quality audit
定限内正态概率的置信下限 Lower confidence limit of normal probability within specified limits
公路、水路货物运输气候环境条件 Climatic environmental conditions existing in the cargo transportation by highway and waterway
等级公路货物运输机械环境条件 Mechanical environmental conditions existing in the cargo transportation by classed highway
水路货物运输机械环境条件 Mechanical environmental conditions existing in the cargo transportation by waterway
国家级重点新产品试制鉴定计划项目申报表及数据库结构 The declare list and framework of database for trial-producition and appraisal plan of national-level major new products
辐射防护技术人员资格基本要求 Basic qualification requirement for radiation protection personer
滚装船与岸联接的基本规定 General rules for Ro/Ro ship-to-shore connection
产品质量平均值的计量一次监督抽样检验程序及抽样表 Single sampling procedures and tables for product quality audit by variableg for mean value
铁路车站及枢纽术语 Terminology for railway station and terminal
钢熔化焊手焊工资格考核方法 Approval testing of manual welders--Fusion welding-steel
孤立批计数抽样检验程序及抽样表 Sampling procedures and tables for isolated lot inspection by attributes
航海通告编写规范 Specifications for notice to mariners
中国海区灯船和大型浮标制式 Maritime light vessels and large buoys system, China
检测和校准实验室能力的通用要求 General requirements for the competence of testing and calibration laboratories
利用实验室间比对的能力验证 第1部分:能力验证计划的建立和运作 Proficiency testing by interlaboratory comparisons--Part 1: Development and operation of proficiency testing schemes
利用实验室间比对的能力验证 第2部分:实验室认可机构对能力验证计划的选择和使用 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
感官分析 方法学 检测和识别气味方面评价员的入门和培训 Sensory analysis--Methodology--Initiation and training of assessors in the detection and recognition of odours
稳态可用性验证试验方法 Compliance test procedures for steady-state availability
导游服务质量 Quality of tour-guide service
公共航空运输服务质量标准 Quality standards of public air transport service
通用键盘汉字输入技能测试方法 The test method for universal keyboard chinese Character input skill
产品质量监督复查程序及抽样方案 Procedures and the plan of sampling for repeat test or inspection in product quality audit
计量截尾序贯抽样检验程序及抽样表(适用于标准差已知的情形〕 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
道路交通标线质量要求和检测方法 Quality requirement and test method for road traffic markings
民用航空飞行人员体格检查鉴定标准 Appraisal standard of physical examination for civil aviation aircrew
民用航空空中交通管制员体格检查鉴定标准 Appraisal standard of physical examination for civil aviation air traffic controllers
民用航空招收飞行学生体格检查鉴定标准 Appraisal standard of physical examination for recruitment of civil aviation airman trainees
民用航空空中乘务员体格检查鉴定标准 Appraisal standard of physical examination for civil aviation flight attendants
邮政特快专递封套 Envelopes for express mail service
消费品和有关的服务比较试验 总则 Comparative testing of consumer products and related services--General principles
旅游服务基础术语 Basic terms of service in tourism
游乐园(场)安全和服务质量 Safety and service quality in the amusement park
工业产品售后服务 第1部分:总则 After-sale service of industrial products--Part 1:General principle
工业产品售后服务 第2部分 维修 After-sale service of industrial products Part 2:Maintain
商品经营质量管理规范 Commodity quality management specification
水路客运服务质量要求 总则 Requirments on services of passenger transport by water--General rules
水路客运服务质量要求 沿海、长江干线客船 Requirments on services of passenger transport by water--Passenger ships sailing in coastal waters and the main routes of the Yangtze river
水路客运服务质量要求 远洋、涉外游览客船 Requirments on services of passenger transport by water--Passenger ships sailing in ocean and for overseas visitors
水路客运服务质量要求 内河客船 Requirments on services of passenger transport by water--Passenger ships sailing in inland waters
水路客运服务质量要求 高速客船 Requirments on services of passenger transport by water--High speed passenger ships
水路客运服务质量要求 游览船 Requirments on services of passenger transport by water--Sightseeing cruise ships
水路客运服务质量要求 港口客运站 Requirments on services of passenger transport by water--Passenger stations in port
防止船舶货舱及封闭舱缺氧危险作业安全规程 Safety regulations for working under hazardous condition of the oxygen deficiency in the cargo holds and closed compartments of ships
油码头安全技术基本要求 Basic requirement for accidents prevention of oil terminals
人民币伪钞鉴别仪 Counterfeit RMB--Banknote discriminating device
防伪全息产品通用技术条件 Universal technical requirements of anti-counterfeiting holographic products
防伪印刷产品生产管理规范 Standardization of production management for anti-counterfeiting printing products
防伪技术术语 Anti-counterfeiting technological terminology
邮政特种信封 邮政快件信封 Special postal envelope--Envelopes of domestic express mail
邮政特种信封 国际邮政公事信封 Special postal envelope-international envelope on postal service
运费代码(FCC)--运费和其他费用的统一描述 Freight Costs Code(FCC)--Harmonization of the description of freight costs and other charges
投诉处理指南 Guidelines for complaints handling
集装箱运输术语 Terminology for container transport
服务企业等级的划分 总则 Classification of grade of service trades General rules
散装石油、液体化工产品港口储存通则 General rule for terminals storage of petroleum in bulk and liquid chemicals in bulk
数据的统计处理和解释 中位数的估计 Interpretation of statistical data--Estimation of a median
电子数据交换的国际商用交换协议样本 Model interchange agreement for the international commercial use of electronic data interchange
运输船舶能源利用监测评价方法 The survey-evaluating method of energy utilization for transport ships
旅游区(点)质量等级的划分与评定 Standard of rating for quality of tourist attractions
加压舱消防安全技术要求 Technical requirements of fire safety in compression chambers
潜水员水下用电安全操作规程 Operating rules for diver's safe use of electricity under water
减压病加压治疗技术要求 Technical requirements of recompression therapy for decompression sickness
氮氧饱和或空气饱和-空气巡回潜水减压程序 Decompression procedures for nitrox or air saturation-air excursion diving
原产地域产品通用要求 General requirements for products of designations of origin and geographical indications
控制图 通则和导引 Control chart-General guide and introduction
纸品装卸、储运安全要求 Safety requirements for paper products handling and storage
民用航空货物运输术语 Civil aviation cargo transpotation terminology
航海日志 Deck log book
零售业态分类 Classification of types of operation in retail business
国际贸易付款条款的缩略语--PAYTERMS Payterms--Abberviations for terms of payment of international trade
液化气船舶安全作业要求 Requirements for the safe operation of liquefied gas tanker
摩托车维修业开业条件 Requirements for industry of motorcycle maintenance and repair being managed
水路客运术语 Terminology for passenger transport by water
危险化学品经营企业开业条件和技术要求 Operation conditions and technical requirements for enterprises handling dangerous chemicals business
体育场所等级的划分 第一部分:保龄球馆星级的划分及评定 Ranking standard for gymnasium and playground--Part 1: Star-rating standard for bowling playground
公路收费制式 Highway toll collection mode
质量体系 汽车供方质量体系要求 Quality system--Quality system requirements for automotive suppliers
各类检查机构能力的通用要求 General criteria for the operation of various types of bodies performing inspection
棉花加工企业基本技术条件 Basic technical condition of cotton processing enterprise
公共航空运输服务质量评定 Evaluation of public air transportation service quality
公路收费方式 Highway toll collection manner
农业机械营销企业 开业条件 等级划分及市场行为要求 Running conditions classification of grade and code of marketing conduct for agricultural machinery circulation enterprises
油船油码头安全作业规程 Safety operation rules for oil tankers and terminals
轮机日志和车钟记录簿 Engine log book and record book of engine order telegraph
营运车辆综合性能要求和检验方法 Multiple performance requirement and detecting methods for commercial vehicles
运输车辆能源利用检测评价方法 Inspection and evaluation method of energy utilization for commercial vehicle
质量管理体系 基础和术语 Quality management systems--Fundamentals and vocabulary
质量管理和质量保证标准 第2部分: GB/T 19001、GB/T 19002和GB/T 19003实施通用指南 Quality management and quality assurance standards--Part 2: Generic guidelines for the application of GB/T 19001、GB/T 19002 and GB/T 19003
质量管理和质量保证标准 第3部分: GB/T 19001在计算机软件开发、供应、安装和维护中的使用指南 Quality management and quality assurance standards--Part 3: Guidelines for the application of GB/T 19001 to the development,supply,installation and maintenance of computer software
质量管理和质量保证标准 第4部分:可信性大纲管理指南 Quality management and quality assurance standards--Part 4:Cuide to dependability programme management
质量管理体系 要求 Quality management systems--Requirements
质量管理体系 业绩改进指南 Quality management systems--Guidelines for performance improvements
质量管理和质量体系要素 第2部分: 服务指南 Quality management and quality system elements--Part 2: Guidelines for services
质量管理和质量体系要素 第3部分: 流程性材料指南 Quality management and quality system elements--Guidelines for processed materials
质量管理和质量体系要素 第4部分: 质量改进指南 Quality management and quality system elements--Guidelines for quality improvement
质量管理 质量计划指南 Quality management--Guidelines for quality plans
质量管理 项目管理质量指南 Quality management--Guidelines to quality in project management
质量管理 技术状态管理指南 Quality management--Guidelines for configuration management
质量体系审核指南 审核 Guidelines for auditing quality systems--Part 1: Auditing
质量体系审核指南 质量体系审核员的评定准则 Guidelines for auditing quality systems--Part 2: Qualification criteria for quality systems auditors
质量体系审核指南 审核工作管理 Guidelines for auditing quality systems--Part 3: Management of audit programmes
测量设备的质量保证要求 第一部分: 测量设备的计量确认体系 Quality assurance requirements for measuring equipment Part1: Metrological confirmation system for measuring equipment
测量设备的质量保证 第2部分: 测量过程控制指南 Quality assurance for measuring equipment--Part 2: Guidelines for control of measurement processes
质量手册编制指南 Guidelines for developing quality manuals
质量经济性管理指南 Guidelines for managing the economics of quality
质量管理 培训指南 Quality management--Guidelines for training
GB/T 19001-1994的统计技术指南 Guidance on statistical techniques for GB/T 19001:1994
区域地质图图例 Geological symbols used for regional geological maps (1:50000)
极限数值的表示方法和判定方法 Rules for expression and judgement of limiting values
标准大气 (30公里以下部分) Standard atmosphere (below 30 kilometers)
统计分布数值表 正态分布 Tables for statistical distributions--Normal distribution
统计分布数值表 X2分布 Tables for statistical distributions--x2-distribution
统计分布数值表 t分布 Tables for statistical distributions--t-distribution
统计分布数值表 F分布 Tables for statistical distributions--F-distribution
统计分布数值表 二项分布 Tables for statistical distributions--Binomial distribution
统计分布数值表 泊松分布 Tables for statistical distributions--Poisson distribution
数据的统计处理和解释 二项分布参数的点估计 Statistical interpretation of data--Point estimation of parameter in binomial distribution
数据的统计处理和解释 二项分布参数的区间估计 Statistical interpretation of data--Interval estimation of parameter in binomial distribution
数据的统计处理和解释 二项分布可靠度单侧置信下限 Statistical interpretation of data--One-sided reliabitity confidence lower limit (Binomial distribution)
数据的统计处理和解释 二项分布参数的检验 Statistical interpretation of data--Test for parameter in binomial distribution
数据的统计处理和解释 泊松分布参数的估计 Statistical interpretation of data--Estimation of parameter in Poisson distribution
数据的统计处理和解释 泊松分布参数的检验 Statistical interpretation of data--Test for parameter in Poisson distribution
食品卫生微生物学检验 总则 Microbiological examination of food hygiene--General principles
食品卫生微生物学检验 菌落总数测定 Microbiological examination of food hygiene--Detection of aerobic bacterial count
食品卫生微生物学检验 大肠菌群测定 Microbiologicl examination of food hygiene--Detection of Coliform bacteria
食品卫生微生物学检验 沙门氏菌检验 Microbiclogicl examination of food hygiene--Examination of Salmonella
食品卫生微生物学检验 志贺氏菌检验 Microbiological examination of food hygiene--Examination of Shigella
食品卫生微生物学检验 致泻大肠埃希氏菌检验 Microbiological examination of food hygiene--Examination of diarrheogenic Escherichia coli
食品卫生微生物学检验 副溶血性弧菌检验 Microbiological examination of food hygiene--Examination of Vibrio parahaemolyticus
食品卫生微生物学检验 小肠结肠炎耶尔森氏菌检验 Microbiological examination of food hygiene--Examination of Yersinia enterocolitica
食品卫生微生物学检验 空肠弯曲菌检验 Microbiological examination of food hygiene--Examination of Campylobacter jejuni
食品卫生微生物学检验 金黄色葡萄球菌检验 Microbiological examination of food hygiene--Examination of Staphylococcus aureus
食品卫生微生物学检验 溶血性链球菌检验 Microbiological examination of food hygiene--Examination of Streptococcus hemolyticus
食品卫生微生物学检验 肉毒梭菌及肉毒毒素检验 Microbiological examination of food hygiene--Examination of Clostridium botulinum and botulinus toxin
食品卫生微生物学检验 产气荚膜梭菌检验 Microbiological examination of food hygiene--Examination of Clostridium perfringens
食品卫生微生物学检验 蜡样芽胞杆菌检验 Microbiological examination of food hygiene--Examination of Bacillus cereus
食品卫生微生物学检验 霉菌和酵母计数 Microbioligical examination of food hygiene--Enumeration of molds and yeasts
食品卫生微生物学检验 常见产毒霉菌的鉴定 Microbiological examination of food hygiene--Identification of common mycotoxin producing fungi
食品卫生微生物学检验 肉与肉制品检验 Microbiological examination of food hygiene--Examination of meat and meat products
食品卫生微生物学检验 乳与乳制品检验 Microbiological examination of food hygiene--Examination of milk and milk products
食品卫生微生物学检验 蛋与蛋制品检验 Microbiological examination of food hygiene--Examination of egg and egg products
食品卫生微生物学检验 水产食品检验 Microbiological examination of food hygiene--Examination of aquatic product foods
食品卫生微生物学检验 清凉饮料检验 Microbiological examination of food hygiene--Examination of cold drinks
食品卫生微生物学检验 调味品检验 Microbiological examination of food hygiene--Examination of flavourings
食品卫生微生物学检验 冷食菜、豆制品检验 Microbiological examination of food hygiene--Examination of cold dish and bean products
食品卫生微生物学检验 糖果、糕点、果脯检验 Microbiological examination of food hygiene--Examination of candy,cake and candied fruitt
食品卫生微生物学检验 酒类检验 Microbiological examination of food hygiene--Examination of wines
食品卫生微生物学检验 罐头食品商业无菌的检验 Microbiological examination of food hygiene--Examination of commercial sterilization of canned food
食品卫生微生物学检验 鲜乳中抗生素残留量检验 Microbiological examination of food hygiene--Examination of residue of antibiotics in fresh milk
食品卫生微生物学检验 染色法、培养基和试剂 Microbiological examination of food hygiene--Stainning methods,culture mediums and reagents
食品卫生微生物学检验 椰毒假单胞菌酵米面亚种检验 Microbiological examination of food hygiene--Examination of Pseudomonas cocovenenans subsp farin of ermentans
食品卫生微生物学检验 单核细胞增生李斯特氏菌检验 Microbiological examination of food hygiene--Examination of Listeria monocytogenes
食品卫生微生物学检验 沙门氏菌、志贺氏菌和致泻大肠埃希氏菌的肠杆菌科噬菌体检验方法 Microbiological examination of food hygiene--Examination of Salmonellae,Shigellae and diarrhoea causative Escherichia coli by means of the diagnostic typing phage set for enterobacteriaceae
食品中氟允许量标准 Permitted level of fluorine in foods
食品中砷限量卫生标准 Tolerance limit of arsenic in foods
数据的统计处理和解释 正态样本异常值的判断和处理 Statistical interpretation of data--Detection and handling of outlying observations in normal sample
数据的统计处理和解释 正态分布均值和方差的估计与检验方法 Statistical interpretation of data--Techniques of estimation and tests relating to means and variances of normal distributions
数据的统计处理和解释 正态分布均值和方差检验的功效 Statistical interpretation of data--Power of tests relating to means and variances of normal distributions
1:5000、1:10000地形图图式 Specifications for cartographic symbols 1:5000 and 1:10000 topographic maps
数值修约规则 Rules for rounding off of numberical values
水文仪器基本环境试验条件及方法 Basic conditions and methods of enviromental test for hydrologic instruments
水文仪器总技术条件 总则 General specification for hydrologic instruments--General
水文仪器总技术条件 参比工作条件 General specification for hydrologic instruments--Referential operating condition
水文仪器总技术条件 结构基本要求 General specification for hydrologic instruments--Basic requirements of structure
水文仪器总技术条件 工作条件影响及试验方法 General specification for hydrologic instruments--The influence of operating condition and test methods
水文仪器总技术条件 检验规则及标志、包装、运输、贮存 General specification for hydrologic instruments--Test regulation, mark, package, transportation and storage
概率极限状态设计(正态-正态模式) Probabilistic limit states design (Normal-Normal mode)
正态分布分位数Xp置信区间 The confidence interval of quantile Xp for normal distribution
地热资源地质勘查规范 Geologic exploration standard of geothermal resources
水文测报装置遥测水位计 Equipments for hydrological measuring and reporting - Remote measuring water level recorder
水文测报装置遥测雨量计 Equipments for hydrological measuring and reporting - Remote measuring rainfall gage
翻斗式雨量计 Tipping bucket raingauge
中国海图图式 Symbols,abbreviations and terms used on Chinese charts
中国航海图编绘规范 Specifications for Chinese nautical charts
海道测量规范 Specifications for hydrographic survey
岩溶地质术语 Karst geology terminology
1:25000、1:50000、1:100000地形图航空摄影测量内业规范 1:25000, 1:50000 and 1:100000 topographic maps--Specifications for aerophotogrammetric office operation
1:25000、1:50000、1:100000地形图航空摄影测量外业规范 1:25000, 1:50000 and1:100000 topographic maps--Specifications for aerophotogrammetric field work
1:25000、1:50000、1:100000地形图图式 Specifications for cartographic symbols 1:25000,1:50000 , 1:100000 topographic maps
1:25000、1:50000地形图编绘规范 Compilation specifications for 1:25000, 1:50000 topographic maps
1:100000地形图编绘规范 Compilation specifications for 1:100000 topographic maps
染色体畸变分析估计生物剂量 Chromosomal aberration analysis for biological dose assessment
静力触探仪 Static penetrometer
标准贯入仪 Standard penetrometer
海洋调查规范 总则 The specification for oceanographic survey - General rules
海洋调查规范 海洋水文观测 The specification for oceanographic survey - Marine hydrographic observations
海洋调查规范 海洋气象观测 The specification for oceanographic survey - Marine meteorological observations
海洋调查规范 海水化学要素观测 The spesification for oceanographic survey - Observations of chemical parameters in sea water
海洋调查规范 海洋声、光要素调查 The specification for oceanographic survey - Swivey of acoustical and optical parameters in the sea
海洋调查规范 海洋生物调查 The specification for oceanographic survey - Marine biological survey
海洋调查规范 海洋调查资料处理 The specification for oceanographic survey - Oceanographic survey data processing
国家一、二等水准测量规范 Specification for the first and second order leveling
国家三、四等水准测量规范 Specifications for the third and fourth order leveling
地质水样中234U/238U、230Th/232Th放射性比值的测定方法 Method of determing the radioactive ratios of 234U/238U, 230Th/232Th in geological water samples
地质水样中226Ra/228Ra 的活度比值分析方法 Method for measuring the Activity ratios of 226Ra to 228Ra in geological water samples
岩石样品中226Ra 的分析方法 射气法 Method for measuring radium-226 in rock samples - Emanation technique
水文仪器系列型谱 The series model of hydrometric instruments
坐标展点仪 Coordinatograph
海洋调查规范 海洋地质地球物理调查 Specification for oceanographic survey--Marine geology and geophysics investigation
海洋水文观测仪器通用技术条件 General technical specifications for oceanographic hydrological instruments
1:5000、1:10000 地形图航空摄影测量外业规范 Specifications for aerophotogrammetric field work 1:5000, 1:10000 topographic maps
国家基本比例尺地形图分幅和编号 Subdivision and numbering for the national primary scale topographic maps
1:5000、1:10000 地形图航空摄影测量内业规范 Specifications for aerophotogrammetric office operation 1:5000, 1:10000 topographic maps
立体坐标量测仪 Stereocomparator
地形图用色 Standard colours for topographic maps
国家基本比例尺地形图修测规范 Revision survey specifications for the national primary scale topographic maps
材料阻尼特性术语 Nomenclature for specifying damping properties of materials
中国植物分类与代码 Classification and codes of Chinese plants
海图印刷规范 Printing specifications for charts
地球化学勘查术语 Terms of geochemical exploration
工程地质术语 Engineering geological terminology
地球物理勘查技术符号 Technical symbols for use in geophysical exploration
影像地图印刷规范 Specification for printing of photomaps
地图印刷规范 Specification for printing of maps
1:1000000地形图编绘规范及图式 Compilation specifications and cartographic symbols for 1:1000000 topographic maps
综合水文地质图图例及色标 Legend and color standard for comprehensive hydrogeologic maps
生物质量 六六六和滴滴涕的测定 气相色谱法 Organisms quality--Determination of BHC and DDT--Gas chromatography
1:500、1:1000、1:2000地形图要素分类与代码 Classification and codes for the features of 1:500, 1:1000 and 1:2000 topographic maps
地球化学勘查技术符号 Technical symbols for geochemical exploration
测绘基本术语 Basic terms of surveying and mapping
大比例尺地形图机助制图规范 Specifications for computer-aided mapping of large-scale topographic maps
海滨观测规范 The specification for offshore observations
慢性毒性和致癌试验 Chronic toxicity and carcinogencity tests
日容许摄入量(ADI)的制定 Estimation of acceptable daily intake
致突变物,致畸物和致癌物的处理方法 Methods for disposing mutagens, teratogens and carcinogens
食品安全性毒理学评价程序 Procedures for toxicological assessment on food safety
食品毒理学实验室操作规范 Good laboratory practice for food toxicology
急性毒性试验 Acute toxicity test
鼠伤寒沙门氏菌/哺乳动物微粒体酶试验 Salmonella typhimurium/mammals microsomal enzyme test(Ames test)
骨髓微核试验 Micronucleus test of bone marrow cell
骨髓细胞染色体畸变试验 Chromosome aberration test of bone marrow cell
小鼠精子畸形试验 Sperm shape abnormality test in mice
小鼠睾丸染色体畸变试验 Chromosome aberration test in mice testicle cell
显性致死试验 Dominant lethal test
非程序性DNA合成试验 Unscheduled DNA synthesis test
果蝇伴性隐性致死试验 Sex-linked recessive lethal test
体外哺乳类细胞(V79/HGPRT)基因突变试验 V79/HGPRT gene mutation test
30天和90天喂养试验 Thirty and ninety days feeding tests
致畸试验 Teratogenicity test
繁殖试验 Reproductive test
代谢试验 Metabolic test
精密工程测量规范 Specifications for precise engineering survey
海洋学综合术语 Oceanography general terminology
海洋学术语 海洋生物学 Oceanographic terminology--Marine biology
海洋学术语 物理海洋学 Oceanographic terminology--Physical oceanography
海洋学术语 海洋化学 Oceanographic terminology--Marine chemistry
非中心 t 分布分位数表 The tables of quantites of the non-central t-distribution
1:250000地形图编绘规范及图式 Compilation specifications and cartographic symbols for 1:250000 topographic maps
水文仪器基本参数及通用技术条件 Primary parameter and general specification for hydrologic instrument
1:500 1:1000 1:2000地形图航空摄影测量数字化测图规范 Specifications for aerial photogrammetric digital mapping of 1:500, 1:1000, 1:2000 topographic maps
遥感影像平面图制作规范 Specification for making photoplan of remote sensing
医用有机硅材料生物学评价试验方法 Organic silicon material for medical use--Biological evaluation test methods
颗粒粒度分布的函数表征 幂函数 Function representation of particle size distribution power-function--Power-fantion
比长基线测量规范 Specifications of the baseline measurements
中、短程光电测距规范 Specifications for short to medium ranges electro-optical distance measurements
1:500、1:1000、1:2000地形图平板仪测量规范 Planetabling specifications for 1:500、1:1000、1:2000 topographic maps
地图学术语 Cartography Terms
海洋功能区划技术导则 Technical directives for the division of marine functional zonation
1:25000、1:50000、1:100000地形图航空摄影测量数字化测图规范 Specifications for aerial photogrammetric digital mapping of 1:25000,1:50000 and 1:100000 topographic maps
摄影测量数字测图记录格式 Record format for photogrammetric digital mapping
大地测量术语 Geodetic terminology
1:500、1:1000、1:2000地形图数字化规范 Specifications for digitising of 1:500,1:1000 and 1:2000 topographic maps
数字地形图产品模式 Outline for the digital topographic map products
海洋监测规范 第1部分: 总则 The spcification for marine monitoring Part 1: General rules
海洋监测规范 第2部分: 数据处理与分析质量控制 The specification for marine monitoring Part 2: Data processing and quality control of analysis
海洋监测规范 第3部分: 样品采集、贮存与运输 The specification for marine monitoring Part 3: Sample collection、storage and transportation
海洋监测规范 第4部分: 海水分析 The specification for marine monitoring Part 4: Seawater analysis
海洋监测规范 第5部分: 沉积物分析 The specification for marine monitoring Part 5: Sediment analysis
海洋监测规范 第6部分: 生物体分析 The specification for marine monitoring Part 6: Organisim analysis
海洋监测规范 第7部分: 近海污染生态调查和生物监测 The specification for marine monitoring Part 7: Ecological survey of offshore pollution and biological monitoring
海洋工程地形测量规范 Specification for marine engineering topographic surveying
海底电缆管道路由勘察规范 Specifications for submarine cable and pipeline route investigation
海上平台场址工程地质勘察规范 Specifications for offshore platform engineering geology in vestigation
海洋自然保护区类型与级别划分原则 Principle for classification of marine nature reserves
省级行政区域界线测绘规范 Specifications for provincial boundary surveying and mapping
地形数据库与地名数据库接口技术规程 Technical rules for data interface between topographic database and geographic name database
地球空间数据交换格式 Geo-spatial data transfer format
船舶海洋水文气象辅助测报规范 The specification for the ships' auxiliary marine hydrology and metereological observations
渔业用图编绘规范 Specifications for fishing charts
海底地形图编绘规范 Specifications for bathymetric charts
警戒潮位核定方法 The methods of determining for the warning tidal level
数字测绘产品质量要求第1部分: 数字线划地形图、数字高程模型质量要求 Quality requirement for digital products of surveying and mapping--Part 1: Quality requirement for digital line topographic map,digital elevation model
国家三角测量规范 Specifications for national triangulation
大地天文测量规范 Specifications for the geodetic astronomy
加密重力测量规范 Specifications for the dense gravity measurement
房产测量规范 第1单元: 房产测量规定 Specifications for estate surveying--Unitl: General rules for estate surveying
房产测量规范 第2单元 房产图图式 Specifications for estate surveying--Unit 2: Specifications for symbols of estated map
水文仪器可靠性技术要求 Specification of reliability for hydrologic instruments
全球定位系统(GPS)测量规范 Specifications for global positioning system (GPS) surveys
数字地形图系列和基本要求 Series and basic requirements of digital topographic maps
数字测绘产品检查验收规定和质量评定 Specification for inspection,acceptance and quality assessment of digital surveying and mapping products
专题地图信息分类与代码 Classify and codes for the thematic map information
水文仪器通则 第3部分: 基本性能及其表示方法 General specification for hydrologic instruments--Part 3: Basic performance and description method
水文仪器安全要求 General specification for hydrologic instrument safety requirements
城市地理信息系统设计规范 Specification for designing urban geographic information system
玻璃体温计 Clinical thermometer
医药凡士林 Medicinal vaseline
注射器、注射针及其他医疗器械 6:100圆锥接头 The conical fittings with a 6% taper for syringes, needles and certain other medical equipment
注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第1部分:通用要求 The conical fittings with a6%(Luer)taper for syringes,needles and certain other medical equipment Part 1:General requirement
注射器、注射针及其他医疗器械6%(鲁尔)圆锥接头 第2部分:锁定接头 The conical fittings with a 6%(Luer)taper for syringes,needles and certain other medical equipment Part 2: Lock fittings
针炙针 Acupuncture needles
安瓿 Ampoule
玻璃输液瓶 Glass infusion bottles
模制抗生素玻璃瓶 Injection vials for antibiotics
管制抗生素玻璃瓶 Tube vial for antibiotic use
穿鳃式止血钳通用技术条件 Haemostatic forceps with box joint--General specifications
Ocu宫内节育器 Ocu intra-uterine devices
职业性苯中毒的诊断 Diagnosis of occupational benzene poisoning
职业性慢性三硝基甲苯中毒诊断标准及处理原则 Diagnostic criteria and principles of managament of occupational chronic trinitrotoluene poisoning
职业性慢性锰中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational chronic manganism
职业性慢性二硫化碳中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational chronic carbon disulfide poisoning
工业性氟病诊断标准及处理原则 Diagnostic criteria and principles of management of industrial fluorosis
橡胶输血胶管 Rubber transfusion tubes
医用诊断X线发生装置通用技术条件 The general specifications on medical diagnostic X-ray generating unit
针尖锋利度和强度试验方法 Method for the test of sharpness and strength of needles tips
医用镊通用技术条件 General specifications for medical forceps
职业性慢性氯丙烯中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational chronic allyl chloride poisoning
职业性急性氯气中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute chlorine poisoning
职业性急性有机氟中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute organic fluoride poisoning
职业性铍病诊断标准及处理原则 Diagnostic criteria and principles of management of occupational beryllium disease
职业性局部振动病诊断标准及处理原则 Diagnostic criteria and principles of management of occupational vibration disease
麻醉呼吸设备名词术语 Anaesthetic equipment and breathing machine vocabulary
职业性接触毒物危害程度分级 Classification of health hazard levels from occupational exposure to toxic substances
玻璃输液瓶盖 第1部分:铝盖 Caps for infusion glass bottles--Part 1:Aluminium caps
玻璃输液瓶盖 第2部分:铝塑组合盖 Caps for infusion glass bottles--Part 2:Caps made of aluminium-plastics combinations
抗生素玻璃瓶盖 第1部分:铝盖 Caps for injection glass vials of antibiotics--Part 1:Aluminium caps
抗生素玻璃瓶盖 第2部分:铝塑组合盖 Caps for injection glass vials of antibiotics--Part 2:Caps made of aluminium-plastics combinations
医用X射线设备高压电缆插头插座连接 High-voltage cable plug and socket connections for medical X-ray equipment
药用聚氯乙烯 (PVC) 硬片 Polyvinyl chloride (PVC) sheet for packing solid medicine
医用诊断X线机械装置通用技术条件 General specification for mechanical units of medical diagnostic X-ray equipment
尘肺的X线诊断 Roentgeno-diagnosis of pneumoconioses
中药材袋运输包装件 Chinese herbal medicine bag package for transport
中药材压缩打包运输包装件 Chinese herbal medicine compressed package for transport
中药材瓦楞纸箱运输包装件 Chinese herbal medicine corrugated carton package for transport
齿科材料名词术语 Vocabulary of dental materials
水体污染慢性甲基汞中毒诊断标准及处理原则 Diagnostic criteria and principle of treatment for chronic methyl-mercury poisoning caused by water pollution
橡胶医用手套 Rubber surgical gloves
橡胶避孕套 第1部分: 技术要求 Rubber condoms--Part 1: Requirements
橡胶避孕套 第2部分: 长度测定 Rubber condoms--Part 2: Determination of length
橡胶避孕套 第3部分: 宽度测定 Rubber condoms--Part 3: Determination of width
橡胶避孕套 第5部分: 针孔漏水试验方法 Rubber condoms--Part 5: Testing for holes-Water leak test
橡胶避孕套 第6部分: 爆破容量和爆破压力的测定 Rubber condoms--Part 6: Determination of bursting volume and pressure
橡胶避孕套 第7部分: 热空气老化 Rubber condoms--Part 7:Oven conditioning
橡胶避孕套 第9部分: 拉伸性能的测定 Rubber condoms--Part 9:Determination of tensile properties
橡胶避孕套 第10部分:消费包装的避孕套的包装与标志 Rubber condoms--Part 10:Packaging and labelling--Condoms in consumer packages
职业性急性有机磷农药中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute organophosphates poisoning
职业性急性电光性眼炎(紫外线角膜结膜炎)诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute electric ophthalmia (Keratoconjunctivitis caused by ultraviolet rays)
职业性急性溴甲烷中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute methyl bromide poisoning
职业性急性磷化氢中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute phosphine poisoning
职业性铬鼻病诊断标准及处理原则 Diagnostic critreia and principles of management of occupational chromium induced nasal disease
职业性急性丙烯腈中毒诊断标准及处理原则 Diagnostic criteris and principles of management of occupational acute acrylonitrile poisoning
职业性急性氨中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute ammonia poisoning
职业性急性氮氧化物中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute nitrogen oxides
职业性急性甲苯中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute toluene poisoning
职业性镉中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational cadmium poisoning
职业性皮肤病诊断标准及处理原则 (总则) Diagnostic criteria and principles of management of occupational dermatosis
职业性电光性皮炎诊断标准及处理原则 Diagnostic criteria and principles of management of occupational electroflash dermatitis
职业性光敏性皮炎诊断标准及处理原则 Diagnostic criteria and principles of management of occupational photosensitive dermatitis
职业性黑变病诊断标准及处理原则 Diagnostic criteria and principles of management of occupational melanosis
外照射急性放射病诊断标准及处理原则 Diagnostic criteria and principles of management for acute radiation sickness from external exposure
外照射慢性放射病诊断标准及处理原则 Diagnostic criteria and principles of management for chronic radiation sickness from external exposure
放射性皮肤疾病诊断标准及处理原则 Diagnostic criteria and principles of management for radiation skin diseases
放射性白内障诊断标准及处理原则 Diagnostic criteria and principles of management for radiation cataract
内照射放射病诊断标准和处理原则 Diagnostic criteria and principles of management for radiation sickness from internal exposure
一次性使用输液器 Infusion sets for single use
一次性使用输血器 Transfusion sets for single use
自动控制压力蒸汽灭菌器技术条件 Specifications for automated autoclave sterilizer
压力蒸汽灭菌器灭菌效果检验方法 Inspecting method for sterilizing effect of automated autoclave sterilizer
手术刀片和手术刀柄配合尺寸 Fitting dimension between knife blades and knife handles
拔牙钳通用技术条件 General specifications for tooth forceps
吻(缝)合器通用技术条件 Specifications for suture forceps
职业性急性一氧化碳中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute carbon monoxide poisoning
职业性减压病诊断标准及处理原则 Diagnostic criteria and principles of management of occupational decompression sickness
尘肺病理诊断标准 Pathologic diagnostic criteria of pneumoconioses
职业性急性三烷基锡中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute trialkyltin poisoning
职业性溶剂汽油中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational solvent gasoline poisoning
职业性急性羰基镍中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute nickel carbonyl poisoning
职业性急性光气中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute phosgene poisoning
职业性急性苯的氨基、硝基化合物(三硝基甲苯除外)中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute aromatic amino-and nitrocompounds (excluding TNT) poisoning
职业性急性硫化氢中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute hydrogen sulfide poisoning
职业性氯丁二烯中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational chloroprene poisoning
职业性急性甲醛中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute formaldehyde poisoning
职业性急性五氯酚中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute pentachlorophenol poisoning
电离辐射事故干预水平及医学处理原则 Guideline on intervention levels and medical management in the event of radiological accident
医用电器设备 第一部分: 安全通用要求 Medical electrical equipment--Part 1: General requirements for safety
医用电气设备 血液透析装置专用安全要求 Medical electrical equipment - Particular requirements for safety of haemodialysis equipment
医用电气设备 第2部分: 诊断X射线发生装置的高压发生器安全专用要求 Medical electrical equipment--Part 2: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
医用电气设备 第2部分: 高频手术设备安全专用要求 Medical electrical equipment-Part 2: Particular requirements for the safety of high frequency surgical equipment
医用电气设备能量为1-50MeV 医用电子加速器专用安全要求 Medical electrical equipment--Particular requirements for the safety of medical electron accelerators in the range 1 MeV to 50 MeV
医用电气设备 微波治疗设备专用安全要求 Particular requirements for the safety of microwave therapy equipment
医用电气设备 超声治疗设备专用安全要求 Medical electrical equipment--Particular requirements for the safety of ultrasonic therapy equipment
医用电气设备 第二部分: 心脏除颤器和心脏除颤器监护仪的专用安全要求 Medical electrical equipment--Part2: Particular requirements for the safety of cardiac defibrillators and cardiac defibrillator-monitors
医用电气设备 医用超声诊断和监护设备专用安全要求 Medical electrical equipment--Particular requirements for the safety of ultrasonic medical diagnostic and monitoring equipment
医用电气设备 第二部分: 治疗X射线发生装置安全专用要求 Medical electrical equipment--Part 2: Particular requirements for safety of therapeutic X-ray generators
医用电气设备 第二部分: 医用诊断X射线源组件和X射线管组件安全专用要求 Medical electrical equipment Part 2: Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis
医用电气设备 第一部分: 安全通用要求 三、并列标准 诊断X射线设备辐射防护通用要求 Medical electrical equipment Part 1: General requirements for safety 3.collateral standard: General requirements for radiation protection in diagnostic X-ray equipment
医用电气设备 第二部分: 遥控自动驱动式Υ射线后装设备安全专用要求 Medical electrical equipment--Part 2: Particular requirements for the safety of remote-controlled automatically-driven gamma-ray afterloading equipment
医用电气设备 第二部分: X射线设备附属设备安全专用要求 Medical electrical equipment--Part 2: Particular requirements for the safety of associated equipment of X-ray equipment
医用电气设备 第1部分: 安全通用要求 1.并列标准: 医用电气系统安全要求 Medical electrical equipment-Part 1: General requiements for safety-1.Collateral standard: Safety requirements for medical electrical systems
医用电气设备 第2部分: 放射治疗模拟机安全专用要求 Medical electrical equipment Part 2: Particular requirements for the safety of radiotherapy simulators
医用电气设备 第2部分: γ射束治疗设备安全专用要求 Medical electrical equipment--Part 2: Particular requirements for the safety of gamma beam therapy equipment
医用电气设备 第2部分: X射线计算机体层摄影设备安全专用要求 Medical electrical equipment--Part 2: Particular requirements for the safety of X-ray equipment for computed tomography
医用电气设备 第2部分: 内窥镜设备安全专用要求 Medical electrical equipment--Part 2: Particular requirements for the safety of endoscopic equipment
医用电气设备 第二部分: 诊断和治疗激光设备安全专用要求 Medical electrical equipment Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment
齿科材料、器械、设备 测试和操作中的名词术语 Terms associated with the testing and the operating of dental material, instruments and equipment
牙位和口腔区域的标示法 Dentistry--Designation system for teeth and areas of the oral cavity
气囊式体外反搏装置 The air-bag type sequential external counter-pulsation device
医用X射线设备术语和符号 Terminology and symbol for medical X-ray equipment
医用X射线设备 高压电缆插头、插座技术条件 Medical X-ray equipment--Specification for high voltage cable plug and socket connections
B型超声诊断设备 B mode ultrasonic diagnostic equipment
医用钳锁合力 脱开力测定方法 Test methods of and opening force for medical use forceps
医用钳夹持拉力测定方法 Method of determination for pulling force of clamping of medical forceps
医用电气设备 第2部分: 心电图机安全专用要求 Medical electrical equipment--Part 2: Particular requirements for the safety of electrocardiographs
眼镜镜片 Spectacles lenses
宫腔形宫内节育器 Uterine cavity form intra-uterine devices
Vcu 宫内节育器 Vcu intra-uterine device
Tcu宫内节育器 Tcu intra-uterine devices
手术显微镜 The operation microscope
医用电气设备 第2部分: 婴儿培养箱安全专用要求 Medical electrical equipment--Part 2: Particular requirements for safety of baby incubators
医用纤维内窥镜通用技术条件 General specifications for medical fiber endoscope
人用持续气流吸入式麻醉机技术要求 Specifications for continuous flow inhalational anaesthetic machines for use with humans
职业性白内障诊断标准及处理原则 Diagnostic criteria and principles of management of occupational cataract
职业性急性四乙基铅中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute tetraethyl lead poisoning
职业性慢性铅中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational chronic lead poisoning
职业性急性三氯乙烯中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute trichloroethylene poisoning
职业性急性1.2-二氯乙烷中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute 1,2-dichloroethane poisoning
职业性急性硫酸二甲酯中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute dimethyl sulfate poisoning
职业性中暑诊断标准及处理原则 Diagnostic criteria and principles of management of occupational heat illness
职业性急性四氯化碳中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute carbon tetrachloride poisoning
职业性急性拟除虫菊酯中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute pyrethroids poisoning
职业性急性砷化氢中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute arsine poisoning
职业性三硝基甲苯白内障诊断标准及处理原则 Diagnostic criteria and principles of management of occupational trinitrotoluene cataract
职业性急性杀虫脒中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute chlordimeform poisoning
职业性急性钒中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute vanadium poisoning
金属烟热诊断标准及处理原则 Diagnostic c, riteria and principles of management of metal fume fever
标准对数视力表 Standard logarithmic visual acuity charts
二氧化碳激光治疗机 Carbon dioxde laser treating instrument
医用高分子软管 尺寸系列 Flexible polymeric tubes for medical use - Dimension
医用诊断X 射线机管电压测试方法 Methods for the measuring of tube voltage of medical diagnostic X-ray equipment
医用诊断X 射线机管电流测试方法 Methods for the measuring of tube current of medical diagnostic X-ray equipment
医用诊断X射线管组件通用技术条件 General specifications of medical diagnostic X-ray tube assemblies
医用诊断X 射线机曝光时间测试方法 Methods for the measurement of exposure time of medical diagnostic X-ray equipment
医用高压氧舱 Medical hyperbaric oxygen chamber
注射针针管刚度试验方法 Test method for stiffness of hypodermic needle tubing
氦氖激光治疗机通用技术条件 The general specification of He-Ne Laser medical equipment
人工心肺机 Artificial heart-lung machine
人工心肺机 滚压式血泵 Artificial heart-lung machine--Roller pump
人工心肺机 鼓泡式氧合器 Artificial heart-lung machine--Bubble oxygenator
人工心肺机 热交换器 Artificial heart-lung machine--Heat exchanger
人工心脏瓣膜通用技术条件 Cardiac valve prostheses general technical specification
经穴部位 Location of points
外科金属植入物通用技术条件 The general technological conditions of surgical metal implant
血液净化术语 血液透析和血液滤过 Terms of blood purification - Hemodialysis and hemofil tration
合成树脂小腿假肢 Synthetic resin blow knee prostheses
配装眼镜 Assembled spectacles
药用明胶硬胶囊 Hard gelatin capsule for medicine
耳穴名称与部位 The nomenclature and location of auricular points
医用X射线管空白详细规范 (可供认证用) Blank detail specification of X-ray tubes for medical practice
手动轮椅车 Manual wheelchairs
外科植入物用钛及钛合金加工材 Wrought titanium and titanium alloy for surgical implants
光学玻璃眼镜片毛坯 Glass blank of ophthalmic lenses
假肢和矫形器术语 Terminology for prosthetics and orthotics
眼镜架 Spectacle frames
一次性使用塑料血袋 Bags for human blood and blood components
医用输液、输血、注射器具检验方法 第一部分: 化学分析方法 Infusion,transfusion,injection equipment for medical use--Part 1: Chemical analysis methods
医用输液、输血、注射器具检验方法 第二部分: 生物试验方法 Infusion, transfusion, injction equipment for medical use--Part 2: Biological test methods
疾病分类与代码 Classification and codes of diseases
医用电气设备环境要求及试验方法 The environmental requirements and test methods for medical electrical equipment
骨骼式大腿假肢 Endoskeletal above knee prosthesis
下肢假肢通用件 Modular units of the lower limb prosthesis
硬质假眼 Hard ocular prosthesis
下肢假肢结构强度试验方法 Structural testing of lower limb prostheses
残疾运动员的医学和功能分级 Medical and functional classification for disabled athletes
无线传输式聋儿听力语言训练设备 通用技术条件 General specification for the wireless transmitting hearing-speech training equipment for the deaf children
助行架 Walking frames
轮椅车 术语 Wheelchair terms
助行器术语 Terminology for walking aids
医用电子加速器性能和试验方法 Medical electron accelerators--Functional performance characteristics and test methods
医用B型超声诊断设备可靠性试验要求和方法 Requirements and methods of reliability test for medical B mode ultrasonic diagnostic equipment
输血(液)器具用软聚氯乙烯塑料 Plasticized polyvinyl chloride (PVC) compounds for transfusion (infusion) equipment
假肢与矫形器 肢体缺失 第1部分:先天性肢体缺失状况的描述方法 Prosthetics and orthotics--Limb deficiencies--Part 1: Method of describing limb deficiencies present at birth
假肢与矫形器 肢体缺失 第2部分: 下肢截肢残肢的描述方法 Prosthetics and orthotics--Limb deficiencies--Part 2: Method of describing lower limb amputation stumps
假肢与矫形器 肢体缺失 第3部分: 上肢截肢残肢的描述方法 Prosthetics and orthotics--Limb deficiencies--Part 3: Method of describing upper limb amputation stumps
残疾人坐地排球运动员参赛资格的医学标准 Competitive medical stardard of volleyball sitting for disabled athletes
一次性使用无菌注射器 Sterile hypodermic syringes for single use--Part 1: Syringes for manual use
一次性使用无菌注射针 Sterile hypodermic needles for single use
医用高分子软管 物理性能试验方法 Flexcible polymeric tubes for medical use--Physical performance test method
淋病诊断标准及处理原则 Diagnostic criteria and management of gonorrhea
麻风病诊断标准及处理原则 Diagnostic criteria and management of leprosy
梅毒诊断标准及处理原则 Diagnostic criteria and management of syphilis
我国控制和消灭血吸虫病标准 Criteria for control and elimination of schistosomiasis in China
血吸虫病诊断标准及处理原则 Diagnostic criteria and prin ciples of management of schistosomiasis
人间鼠疫疫区处理标准及原则 National criterion and principle of treatment of human plague area in China
一次性使用卫生用品卫生标准 Hygienic standard for disposable sanitary products
一次性使用医疗用品卫生标准 Hygienic standard of disinfection for single use medical products
消毒与灭菌效果的评价方法与标准 Evaluating method and standard for the efficacy of disinfection and sterilization
医院消毒卫生标准 Hygienic standard for disinfection in hospitals
麻疹诊断标准及处理原则 Diagnostic criteria and principles of management of measles
霍乱诊断标准及处理原则 Diagnostic criteria and principles of management of cholera
丝虫病诊断标准及处理原则 Diagnostic criteria and principles of management of filariasis
黑热病诊断标准及处理原则 Diagnostic criteria and principles of management of kala-azar
传染性肺结核诊断标准及处理原则 Diagnostic criteria and principles of management of infectious pulmonary tuberculosis
布鲁氏菌病诊断标准及处理原则 Diagnostic criteria and principles of management of brucellosis
疟疾诊断标准及处理原则 Diagnostic criteria and principles of management of malaria
乙型病毒性肝炎的诊断标准及处理原则 Diagnostic criteria and principle of management of hepatitis B
鼠疫诊断标准 Diagnostic criteria of plague
鼠疫控制及其考核原则与方法 Plague control and its examination principle and method
猩红热诊断标准及处理原则 Diagnostic criteria and principles of management for scarlet fever
流行性感昌诊断标准及处理原则 Diagnostic criteria and principles of management of influenza for its control
钩端螺旋体病诊断标准及处理原则 Diagnostic criteria and principles of management of leptospirosis
流行性出血热诊断标准及处理原则 Diagnostic criteria and principles of management of epidemic hemorrhagic fever(EHF)
白喉诊断标准和防治原则 Diagnostic criteria and principles of management of diphtheria
百日咳诊断标准及处理原则 Diagnostic criteria and principles of management of pertussis
丁型病毒性肝炎诊断标准及处理原则 Diagnostic criteria and principles of management of viral hepatitis D
HIV/AIDS诊断标准及处理原则 Diagnostic criteria and principles of management of HIV/AIDS
伤寒、副伤寒诊断标准及处理原则 Diagnostic criteria and principles of management of typhoid and paratyphoid
细菌性痢疾、阿米巴痢疾诊断标准及处理原则 Diagnostic criteria and principles of management of bacillary and amebic dysentery
大骨节病诊断标准 Diagnostic criteria of kashin beck disease
地方性甲状腺肿的诊断及分度标准 Diagnostic and classificatory criteria of endemic goiter
碘缺乏病(IDD)区划分标准 Criteria of delimitation for endemic areas
碘缺乏病消除标准 Criteria of elimination on iodine deficiency disorders
大骨节病病区控制及考核验收办法 Control, checking and accepting methods of kashin-beck disease area
儿童少年脊柱弯曲异常的初筛 Primary screening examination for defects of vertebral column among children and adolescents
中小学生健康检查表规范 Standards of physical examination records for students in elementary and middle schools
放射事故个人外照射剂量估计原则 Principles of estimate on personal dose from external exposure in radiation accident
γ远距治疗室设计的放射防护要求 Radiological protection requirement for design of γ-ray teletherapy rooms
X线诊断中受检者器官剂量的估算方法 Methods for estimation of examine's organ doses in X-ray diagnosis
职业性噪声聋诊断标准及处理原则 Diagnostic criteria and principles of management of occupational noise-induced hearing loss
心脏起搏器 第一部分: 植入式心脏起搏器 Cardiac pacemakers--Part 1: Implantable pacemakers
职工工伤与职业病致残程度鉴定 Assessment and gradation of disability caused by work-related injuries and occupational diseases
中药用喷雾干燥装置 Chinese medicinal spray dryer system
棉尘病诊断标准及处理原则 Diagnostic criteria and principles of management of byssinosis
职业性慢性丙烯酰胺中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational chronic acrylamide poisoning
职业性化学性皮肤灼伤诊断标准及处理原则 Diagnostic criteria and principles of management of chemical skin burns
职业性急性氨基甲酸酯杀虫剂中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute carbamate insecticides poisoning
职业性急性甲醇中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute methanol poisoning
职业性化学性眼灼伤诊断标准及处理原则 Diagnostic criteria and principles of management of occupational chemical eye burns
职业性痤疮诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acne
职业性哮喘诊断标准及处理原则 Diagnostic criteria and principles of management of occupational asthma
职业性急性二氧化硫中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute sulfur dioxide poisoning
职业性中毒性肝病诊断标准及处理原则 Diagnostic criteria and principles of management of occupational toxic hepatopathy
职业性急性变应性肺泡炎诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute allergic alveolitis
职业性牙酸蚀病诊断标准及处理原则 Diagnostic criteria and principles of management of occupational dental erosion
职业性皮肤溃疡诊断标准及处理原则 Diagnostic criteria and principles of management of occupational ulcers
医疗卫生用品辐射灭菌消毒质量控制标准 Quality control standards for radiation sterilization of medical and hygienical products
职业性急性钡中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute barium poisoning
职业性急性铊中毒诊断标准及处理原则 Diagnostic criteria and principles of management of occupational acute thallium poisoning
放射性肿瘤判断标准及处理原则 Diagnostic criteria and principles of management of radiogenic neoplasms
放射工作人员的健康标准 Health standards for radiation workers
外照射亚急性放射病诊断标准及处理原则 Diagnostic criteria and principles of management for subacute radiation sickness from external exposure
外照射放射性骨损伤诊断标准及处理原则 Diagnostic criteria and principles of management for external radiation bone injuries
放冲性甲状腺疾病诊断标准及处理原则 Diagnostic criteria and principles of management for radiation thyroid diseases
放冲复合伤诊断标准及处理原则 Diagnostic criteria and principles of management for combined radiation-blast injury
放烧复合伤诊断标准及处理原则 Diagnostic criteria and principles of management for combined radiation-burn injury
新生儿破伤风诊断标准及处理原则 Diagnostic criteria and principle of management for tetanus neonatorum
脊髓灰质炎诊断标准及处理原则 Diagnostic criteria and principle of management for poliomyelitis
大骨节病病区判定和划分标准 Criteria of decide and delimi of Kashin-Beck disease endemic area
地方性氟骨症临床分度诊断 Diagnosis of clinical classification for endemic skeletal fluorosis
大骨节病防制效果判定 Judging criteria of preventive effect on Kashin-Beck disease
儿童少年甲状腺容积正常值 Normal value of thyroid volume in children and adolescents
残疾人辅助器具 分类 Technical aids for disabled persons--Classification
残疾人田径运动员医学和功能分级标准 Medical and functional classification standard of athletics for disabled athletes
中医临床诊疗术语 疾病部分 Clinic terminology of traditional Chinese medical diagnosis and treatment--Diseases
中医临床诊疗术语 症候部分 Clinic terminology of traditional Chinese medical diagnosis and treatment--Syndromes
中医临床诊疗术语 治法部分 Clinic terminology of traditional Chinese medical diagnosis and treatment--Therapeutic methods
医用超声诊断设备声输出公布要求 Requirements for the declaration of the acooustic output of medical diagnostic ultrasonic equipment
职业性急性化学物中毒的诊断 第1部分:职业性急性化学物中毒诊断总则 Diagnosis of occupational acute chemical poisoning--Part 1: General diagnostic guideline of occupational acute chemical poisoning
职业性急性化学物中毒的诊断 第2部分:职业性急性隐匿式化学物中毒的诊断规则 Diagnosis of occupational acute chemical poisoning--Part 2: Diagnostic guideline of occupational acute obscure chemical poisoning
职业性急性化学物中毒的诊断 第6部分: 职业性急性化学物中毒性呼吸系统疾病的诊断 Diagnosis of occupational acute chemicals poisoning--Part 6: Diagnostic criteria of occupatiaonal acute toxic pulmomopathy
结核病监测规范 Surveillance standards of tuberculosis
职业病诊断标准的起草与表述规则 第1部分:职业病诊断标准编写的基本规定 Rules of drafting and presentation of diagnostic criteria of occupational disease--Part 1: General guideline for drafting diagnostic criteria of occupational disease
职业病诊断标准的起草与表述规则 第2部分:职业病诊断名词术语 Rule of drafting and presentation of diagnostic criteria of occupational disease--Part 2: Terms of diagnosis of occupational disease
动物鼠疫监测标准 Surveillance standard for plague epizootic
鼠疫自然疫源地及动物鼠疫流行判定标准 The criteria for determinating plague natural foci and plague epizootics
流行性脑脊髓膜炎诊断标准和处理原则 Diagnostic criteria and principles of management for epidemic cerebrospinal meningitis
布鲁氏菌病监测标准 Surveillance standard for Brucellosis
医疗器械生物学评价 第1部分: 评价与试验 Biological evaluation of medical devices--Part 1: Evaluation and testing
医疗器械生物学评价 第2部分: 动物保护要求 Biological evaluation of medical devices--Part 2: Animal welfare requirements
医疗器械生物学评价 第3部分:遗传毒性、致癌性和生殖毒性试验 Biological evaluation of medical devices--Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity
医疗器械生物学评价 第5部分:细胞毒性试验:体外法 Biological evaluation of medical devices--Part 5: Tests for cytotoxicity: in vitro methods
医疗器械生物学评价 第6部分:植入后局部反应试验 Biological evaluation of medical devices--Part 6: Tests for local effects after implantation
医疗器械生物学评价 第7部分: 环氧乙烷灭菌残留量 Biological evaluation of medical devices--Part 7:Ethylene oxide sterilization residuals
医疗器械生物学评价 第9部分: 潜在降解产物的定性和定量框架 Biological evaluation of medical devices-Part 9:Framework for identification and quantification of potential degradation product
医疗器械生物学评价 第10部分: 刺激与致敏试验 Biological evaluation of medical devices--Part 10: Tests for irritation and sensitization
医疗器械生物学评价 第11部分:全身毒性试验 Biological evaluation of medical devices--Part 11: Tests for systemic toxicity
医疗器械生物学评价 第12部分: 样品制备与参照样品 Biological evaluation of medical devices--Part 12: Sample preparation and reference materials
医疗器械生物学评价 第13部分: 聚合物医疗器械的降解产物的定性与定量 Biological evaluation of medical devices--Part 13:Identification and quantification of degradation products from polymeric medical devices
盲人手杖 安全色标志 Tactile sticks-A sign of safety colours
盲人手杖 规格与分类 Tactile sticks-Specification and classification
残疾人冬季运动项目运动员医学和功能分级标准 Medical and classificational standard of winter sports for disabled athletes
尿吸收器具 第1部分: 尿失禁类型的术语 Urine absorbing aids--Vocabulary--Part 1: Conditions of urinary incontinence
尿吸收器具 第2部分: 产品的术语 Urine absorbing aids--Vocabulary--Part 2: Products
尿吸收器具 第3部分: 产品类型的标识 Urine absorbing aids--Vocabulary--Part 3: Identification of product types
医用成像部门的评价及例行试验 第2-6部分: X射线计算机体层摄影设备稳定性试验 Evaluation and routine testing in medical imaging departments--Part 2-6: Constancy tests--X-ray equipment for computed tomography
医用成像部门的评价及例行试验 第1部分: 总则 Evaluation and routine testing in medical imaging departments--Part 1: General aspects
医用成像部门的评价及例行试验 第2-1部分: 洗片机稳定性试验 Evaluation and routine testing in medical imaging departments--Part 2-1: Constancy tests--Film processors
医用成像部门的评价及例行试验 第2-2部分: 稳定性试验 X射线摄影暗匣和换片器--屏--片接触和屏--匣组件相对灵敏度 Evaluation and routine testing in medical imaging departments--Part 2-2 Constancy tests-Radiographic cassettes and film changers-Film-screen contact and relative sensitivity of the screen-cassette assembly
医用成像部门的评价及例行试验 第2-3部分: 暗室安全照明状态的稳定性试验 Evaluation and routine testing in medical imaging departments-- Part 2-3: Constancy tests-Darkroom safelight conditions
医用成像部门的评价及例行试验 第2-5部分: 图像显示装置稳定性试验 Evaluation and routine testing in medical imaging departments--Part 2-5: Constancy tests-Image display devices
风疹诊断标准及处理原则 Diagnostic criteria and principles of management for rubella
甲型病毒性肝炎诊断标准及处理原则 Diagnostic criteria and principles of managements for viral hepatitis A
戊型病毒性肝炎诊断标准及处理原则 Diagnostic criteria and principles of management for viral hepatitis E
感染性腹泻的诊断标准及处理原则 Diagnostic criteria and principles of management for infectious diarrhea
包虫病诊断标准及处理原则 Diagnostic criteria and principles of management for hydatid disease
狂犬病诊断标准及处理原则 Diagnostic creteria and principles of management of rabies
炭疽诊断标准及处理原则 Diagnostic criteria and principles of management for anthrax
流行性腮腺炎诊断标准及处理原则 Diagnostic criteria and principle of management for mumps
地方性氟中毒病区控制标准 Control standard for endemic fluorosis area
地方性氟中毒病区划分标准 Divide standard of endemic fluorosis areas
克山病基本控制标准 Control standard for Keshan disease
克山病病区划定和类型划分 Decide and delimit of Keshan disease endemic area
克山病诊断标准 Diagnostic standard for Keshan disease
盐碘现场半定量检测包质量评定标准 Criteria for quality assessment of field semi-quantitative test kit of salt iodine
职业性急性--甲胺中毒的诊断 Diagnostic criteria of occupational acute monomethylamine poisoning
职业性急性化学物中毒的诊断 第9部分: 职业性急性化学物中毒性心脏病的诊断 Diagnosis of occupational acute chemicals poisoning--Part 9: Diagnostic criteria of occupatiaonal acute toxic cardiopathy
职业性急性化学物中毒的诊断 第10部分: 职业性急性化学物中毒性血液系统疾病的诊断 Diagnosis of occupational acute chemicals poisoning-Part 10: Diagnostic criteria of occupational acute toxic hematologic diseases
职业性磷中毒的诊断 Diagnostic criteria of occupational phosphorus poisoning
儿童少年血红蛋白筛检 Screening of hemoglobin for children and adolescents
强制外循环式提取罐(机组) Leaching equipment of forced external circulation
化妆品皮肤病诊断标准及处理原则 总则 Diagnostic criteria and principles of management of skin diseases induced by cosmetics--Ceneral guideline
化妆品接触性皮炎诊断标准及处理原则 Diagnostic criteria and principles of management of contact dermatitis induced by cosmetics
化妆品痤疮诊断标准及处理原则 Diagnostic criteria and principles of management of acne induced by cosmetics
化妆品毛发损害诊断标准及处理原则 Diagnostic criteria and principles of management of hair damage induced by cosmetics
化妆品甲损害 诊断标准及处理原则 Diagnostic criteria and principles of management of nail damage induced by cosmetics
化妆品光感性皮炎诊断标准及处理原则 Diagnostic criteria and principles of management of photosensitive dermatitis induced by cosmetics
化妆品皮肤色素异常诊断标准及处理原则 Disgnostic criteria and principles of management of skin discolouration induced by cosmetics
轮椅车 依据外观特征的分类 Wheelchair--Type classification based on appearance characteristics
假肢与矫形器 假肢部件的分类和描述 第1部分: 假肢部件的分类 Prosthetics and orthotics--Classification and description of prosthetic components Part 1: Classification of prosthetic components
假肢与矫形器 假肢部件的分类和描述 第2部分: 下肢假肢部件的描述 Prosthetics and orthotics--Classification and description of prosthetic components Part 2: Description of lower-limb prosthetic components
假肢与矫形器 假肢部件的分类和描述 第3部分: 上肢假肢部件的描述 Prsthetics and orthotics--Classification and description of prosthetic components Part 3: Description of upper-limb prosthetic components
残疾人自行车和射箭运动员医学和功能分级 Medical and functional classification of cycling and archery for disabled athletes
集尿袋 第1部分: 术语 Urine collection bags Part 1: Vocabulary
集尿袋 第2部分: 尺寸的测定 Urine collection bags Part 2: Determination of dimensions
集尿袋 第3部分: 容量的测定 Urine collection bags Part 3: Verification of rated volume
集尿袋 第4部分: 泄漏的试验方法 Urine collection bags Part 4: Determination of freedom from leakage
眼科仪器 验光镜片 Ophthalmic instrument--Trial case lenses
西洋参加工产品分等质量标准 The grade quality standards of products of processed American ginseng
冻干西洋参(活性西洋参)分等质量标准 The grade and quality standards of frozen dry American ginseng(active American ginseng)
西洋参片分等质量标准 The grade and quality standards of American ginseng chips
西洋参口嚼片分等质量标准 The grade quality standards of American ginseng chewing chips
西洋参袋泡茶分等质量标准 The grade and quality standards of American ginseng rea
马传染性贫血病间接ELISA技术规程 Rules of indirect ELISA technique for equine infectious anemia disease
X射线计算机断层摄影装置影像质量保证检测规范 Specification of Image quality assurance test for X-ray equipment for computed tomography
中、小型集约化养猪场兽医防疫工作规程 Veterinary regulations of disease prevention in middle and small intensive pig farms
放射治疗机房设计导则 Guidelines for radiotherapy treatment rooms design
放射治疗模拟机 性能和试验方法 Radiotherapy simulators-Functional performance Characteristics and test methods
编写和使用医用电气设备教材的导则 Guidelines for the development and use of medical electrical equipment educational materials
管理、医疗、护理人员安全使用医用电气设备导则 Guidelines for administrative,medical,and nursing staff concerned with the safe use of medical electrical equipment
电动上肢假肢通用件 Modular unit of electric arm
轮椅车 座(靠)垫阻燃性的要求和测试方法 Wheelchairs--Resistance to ignition of upholstered parts--Requirements and test methods
民用航空运输机场应急救护设备配备 Provision of emergency medical supplies and equipment at civil aviation transportation airport
眼科仪器 试镜架 Ophthalmic instrument--Trial frames
过量受照人员的医学检查规范 Specifications of the medical examinations for the overexposed individuals
放射性核素内污染人员医学处理规范 Medical management standards for internal contamination of radionuclides
矿工氡子体个人累积暴露量估算规范 Estimation standards of personal cumulative exposure to radon decay products for miners
外照射事故受照人员的医学处理和治疗方案 Medical management and treatment programme for personnel exposed to accidental external irradiation
职业性放射性疾病报告格式与内容 The report form and contents for radiation induced occupational diseases
放射性疾病名单 List for radiation induced diseases
医疗保健产品灭菌--确认和常规控制要求--工业湿热灭菌 Sterilization of health care products--Requirements for validation and routine control--Industrial moist heat sterilization
医疗器械--环氧乙烷灭菌 确认与常规控制 Medical devices--Validation and routine control of ethylene oxide sterilization
医疗保健产品灭菌--确认和常规控制要求--辐射灭菌 Sterilization of health care products--Requirement for validation and routine control--Radiation sterilization
医疗保健产品灭菌--生物指示物--第1部分: 通则 Sterilization of health care products--Biological indicators--Part 1: General
医疗保健产品灭菌--生物指示物--第2部分: 环氧乙烷灭菌用生物指示物 Sterilization of health care products--Biological indicators--Part 2: Biological indicators for ethylene oxide sterilization
医疗保健产品灭菌--生物指示物--第3部分: 湿热灭菌用生物指示物 Sterilization of health care products--Biological indicators--Part 3: Biological indicators for moist heat sterilization
医疗保健产品灭菌--化学指示物--第1部分: 通则 Sterilization of health care products--Chemical indicators--Part 1: General requirements
假肢 下肢假肢的结构检验 第1部分: 试验配置 Prosthetics-Structural testing of lower-limb prostheses--Part 1: Test configurations
假技 下肢假肢的结构检验 第2部分: 试验样品 Prosthetics--Structural testing of lower-Limb prostheses--Part 2: Test samples
假肢 下肢假肢的结构检验 第3部分: 主结构检验 Prosthetics--Structural testing of lower-limb prostheses--Part 3: Principle structural tests
假肢 下肢假肢的结构检验 第4部分: 主结构检验中的加载参数 Prosthetics--Structural testing of lower-limb prostheses--Part 4: Loading parameters of principal structural tests
制造医疗器械用不锈钢针管 Stainless steel needle tubing for manufacture of medical devices
专用输液器 第1部分: 一次性使用精密过滤输液器 Infusion sets for special purpose Part 1: Infusion sets with precision filters for single use
使用硫酸亚铁剂量计测量水中吸收剂量的标准方法 Standard method for using the ferrous sulfate(Fricke) dosimeter to measure absorbed dose in water
危险货物包装标志 Labels for packages of dangerous goods
爆破片与爆破片装置 Bursting discs and bursting disc devices
卤代烷灭火系统容器阀性能要求和试验方法 Halon fire extinguishing systems--Performance requirements and method of test for container valves
卤代烷灭火系统 喷嘴性能要求和试验方法 Halon fire extinguishing systems--Performance requirements and method of test for nozzles
自动喷水灭火系统 湿式报警阀的性能要求和试验方法 Automatic sprinkler systems--Performance requirements and methods of test for wet system alarm valves
空气中可燃气体爆炸指数的测定 Determination of explosion indices of combustible gases in air
摩托车乘员头盔 Helmets for motorcycle users
高温作业环境气象条件测定方法 Methods for measuring meteorological conditions in the hot work environment
高温作业允许持续接触热时间限值 Limit value of allowable continuous heat exposure time in hot environment
工作场所的险情信号 险情听觉信号 Danger signals for work places - Auditory danger signals
人类工效学 险情视觉信号 一般要求 设计和检验 Ergonomics--Visual danger signals--General requirements, design and testing
人类工效学 险情和非险情声光信号体系 Ergonomics--System of danger and non-danger signals with sound and light
机动车辆允许噪声 Permissible noise limit emitted by power-driven vehicles
机动车辆噪声测量方法 Measuring method for noise of power-driven vehicles
工业锅炉水质 Water quality for industrial boilers
船用消防接头 Marine fire-fighting coupeigs
船用法兰消火栓 Marine flanged fire hydrants
成年人头面部尺寸 Head-face dimensions of adults
自吸过滤式防尘口罩通用技术条件 General technical requirements for self-inhalation filtertype dust respirator
爆炸品保险箱 Safety boxes for explosives
安全帽 Sefety helmet
安全帽试验方法 Test method for safety helmet
过滤式防毒面具通用技术条件 General technical reguirements for filter type respirators
过滤式防毒面具面罩性能试验方法 Performance test methods for facepiece of filter type respirator
过滤式防毒面具滤毒罐性能试验方法 Performance test methods for canister of filter type respirator
安全标志 Safety signs
环境空气质量标准 Ambient air quality standard
海水水质标准 Sea water quality standard
净水剂 硫酸铝 Flocculant--Aluminium sulfate
空气中声和噪声强弱的主观和客观表示法 Expression of physical and subjective magnitudes of sound and noise in air
内扣式消防接口 Fire protection snap connections
室内消火栓 Indoor fire hydrant
消防水泵接合器 Siamese connection
造纸工业水污染物排放标准 Discharge standard of water pollutants for paper industry
船舶污染物排放标准 Effluent standard for pollutants from ship
高处作业分级 Classification of works at heights
焊接眼面防护具 Equipment for eye and face protection during welding operations
焊接护目镜和面罩非光学测试方法 Methods of non-optieal test for welding goggles and mask
焊接护目镜光学性能试验方法 Methods of optieal test for welding goggles
地面水环境质量标准 Environmental quality standard for surface water
制订地方水污染物排放标准的技术原则与方法 Technological principle and methods for enactment of local water pollutant emission standard
制定地方大气污染物排放标准的技术方法 Technical methods for making local emission standards of air pollutants
锅炉烟尘排放标准 Standard of smoke and dust emission for boiler
汽油车排气污染物的测量 怠速法 Measurement method for pollutants at idle speed from vehicle with petrol engine
柴油车自由加速烟度的测量 滤纸烟度法 Measurement method for smoke exhausted from vehicle with diesel engine at free acceleration--Filtermeter
压燃式发动机和装用压燃式发动机的车辆排气可见污染物限值及测试方法 Limits and measurement methods for exhaust visible pollutants from compression ignition(C.I.) engines and vehicles equipped with C.I. Engines
体力劳动强度分级 Classification on intensity of physical work
学校课桌椅功能尺寸 The functional sizes of chairs and desks for school
固定式钢直梯安全技术条件 Safety requirements for fixed steel vertical ladders
固定式钢斜梯安全技术条件 Safety requirements for fixed steel oblique ladders
固定式工业防护栏杆安全技术条件 Safety requirements for fixed industrial protective railings
固定式工业钢平台 Fixed steel industrial platform
二氟一氯一溴甲烷灭火剂 Fire extinguishing agent--Bromochlorodifluoromethane
碳酸氢钠干粉灭火剂 Fire extinguishing agent--Sodium bicarbonate dry chemical
高温作业分级 Classified standard of working in the hot environment
外壳防护等级(IP代码) Degrees of protection provided by enclosure (IP code)
梯恩梯工业水污染物排放标准 Effluent standards for pollutants from TNT manufacturing industry
黑索金工业水污染物排放标准 Effluent standards for pollutants from RDX manufacturing industry
二硝基重氮酚工业水污染物排放标准 Effluent standards for pollutants from dinitrodiazophenol manufacturing industry
叠氮化铅、三硝基间苯二酚铅、D.S 共晶工业水污染物排放标准 Effluent standards for water pollutants from lead azide, lead styphnate and D.S crystals manufacturing industry
农用污泥中污染物控制标准 Control standards for pollutants in sludges from agricultural use
纺织染整工业水污染物排放标准 Discharge standard of water pollutants for dyeing and finishing of textile industry
家用电动洗衣机的安全要求 Safety requirements for household electric washing machines
消防技术文件用消防设备图形符号 Equipment for fire protection and fire fighting graphical symbols for fire protection plans-specification
手提式灭火器通用技术条件 General specifications for portable fire extinguishers
防静电鞋、导电鞋 技术要求 Technical requirements for antistatic footwear and conductive footwear
化学泡沫灭火器用灭火剂 Agent for chemical foam fire extinguishers
二氧化碳灭火剂 Fire extinguishing agent--Carbon dioxide
手提式1211灭火器 Portable 1211 fire extinguishers
手提式水型灭火器 Portable water fire extinguishers
手提式二氧化碳灭火器 Portable carbon dioxide fire extinguishers
手提式化学泡沫灭火器 Portable chemical foam fire extinguishers
手提式酸碱灭火器 Portable soda-acid fire extinguishers
手提式干粉灭火器 Portable dry powder fire extinguishers
室外消火栓通用技术条件 General technical specification for hydrant
消火栓连接器 Hydrant connector
无衬里消防水带 Unlined fire hose
压力机用光线式安全装置技术条件 Technical requirements for light type safety device used for the presses
橡胶工业静电安全规程 Safety rules of static electricity in the rubber industry
磨削机械安全规程 Safety code for grinding machines
家用和类似用途电器的安全 第一部分: 通用要求 Part 1: Safety of household and similar electrical appliances General requirements
家用和类似用途电器的安全 食物搅碎器及类似用途电器的特殊要求 Safety of household and similar electrical appliances--Particular requirements for food blenders and similar electrical appliances
家用和类似用途电器的安全 电炒锅的特殊要求 Safety of household and similar electrical appliances--Particular requirements for electrical cookers
家用和类似用途电器的安全 自动电饭锅的特殊要求 Safety of household and similar electrical appliances--Particular requirements for automatic rice cookers
家用和类似用途电器的安全 真空吸尘器和吸水式清洁器的特殊要求 Safety of household and similar electrical appliances-Particular requirements for vacuum cleaners and water suction cleaning appliances
家用和类似用途电器的安全 电动剃须刀、电推剪及类似器具的特殊要求 Safety of household and similar electrical appliances--Particular requirements for electric shavers, hair clippers and similar appliances
家用和类似用途电器的安全 按摩电器的特殊要求 Safety of household and similar electrical appliances--Particular requirements for massage appliances
家用和类似用途电器的安全 快热式热水器的特殊要求 Safety of household and similar electrical appliances Particular requirements for instantaneous water heaters
家用和类似用途电器的安全 贮水式电热水器的特殊要求 Safety of household and similar electrical appliances--Particular requirements for storage water heaters
家用和类似用途电器的安全 电冰箱、食品冷冻箱和制冰机的特殊要求 Safety of household and similar electrical appliances particular requirements for refrigerators,food-freezers and ice-makers
家用和类似用途电器的安全 面包片烘烤器、烤架、电烤炉及类似用途器具的特殊要求 Safety of household and similar electrical appliances-Particular requirements for toasters,grills,roasters and similar appliances
家用和类似用途电器的安全 电池驱动的电动剃须刀、电推剪及其充电和电池组的特殊要求 Safety of household and similar electrical appliances--Particular requirements for battery-powered shavers,hair clippers and their charging and battery assemblies
家用和类似用途电器的安全 电动机--压缩机的特殊要求 Safety of household and similar electrical appliances--Particular requirements for motor-compressors
家用和类似用途电器的安全 电池充电器的特殊要求 Safety of household and similar electrical appliances-Particular requirements for battery chargers
家用和类似用途电器的安全 液体加热器的特殊要求 Safety of household and similar electrical appliances-Particular requirements for appliances for heating liquids
家用和类似用途电器的安全 滚筒式干衣机的特殊要求 Safety of household and similar electrical appliances--Particular requirements for tumbler dryers
家用和类似用途电器的安全 家用电灶、灶台、烤炉和类似器具的特殊要求 Safety of household and similar electrical appliances--Particular requirements for cooking ranges, cooking tables, ovens and similar appliances for household use
家用和类似用途电器的安全 洗衣机的特殊要求 Safety of household and similar electrical appliances--Particular requirements for washing machines
家用和类似用途电器的安全 洗碟机的特殊要求 Safety of household and similar electrical appliances - Particular requirements for dishwashers
家用和类似用途电器的安全 离心式脱水机的特殊要求 Safety of household and similar electrical appliances--Particular requirements for spin extractors
家用和类似用途电器的安全 电风扇和调速器的特殊要求 Safety of household and similar electric appliances - Particular requirements for electric fans and regulators
家用和类似用途电器的安全 吸油烟机的特殊要求 Safety of household and similar electrical appliances-Particular requirements for range hoods
家用和类似用途电器的安全 电磁灶的特殊要求 Safety of household and similar electrical appliances--Particular requirements for electromagnetic cookers
家用及类似用途电器的安全 电动食品加工器具的特殊要求 Safety of household and similar electrical appliances - Particular requirements for electrically operated food preparation appliances
家用和类似用途电器的安全 商用电深油炸锅的特殊要求 Safety of household and similar electrical appliances--Particular requirements electric deep fat fryers
家用和类似用途电器的安全 商用电蒸锅的特殊要求 Safety of household and similar electrical appliances--Particular requirements for commercial electric steam cookers
家用和类似用途电器的安全 商用电煮锅的特殊要求 Safety of household and similar electrical appliances--Particular requirements for commercial electric boiling pans
家用和类似用途电器的安全 商用电开水器和液体加热器的特殊要求 Safety of household and similar electrical appliances--Particular requirements for commercial water electric boilers and liquid heaters
家用和类似用途电器的安全 商用单双面电热铛的特殊要求 Safety of household and similar electrical appliances--Particular requirements for commercial electric griddles and griddle grills
家用和类似用途电器的安全 商用电动饮食加工机械的特殊要求 Safety of household and similar electrical appliances--Particular requirements for commercial electric kitchen machines
家用和类似用途电器的安全 商用电烤炉和烤面包炉的特殊要求 Safety of household and similar electrical appliances-Particular requirements for commercial electric grillers and toasters
家用和类似用途电器的安全 商用多用途电平锅的特殊要求 Safety of household and similar electrical appliances-Particular requirements for commercial electric multi-purpose cooking pans
家用和类似用途电器的安全 便携式电热工具及其类似器具的特殊要求 Safety of household and similar electrical appliances Particular requirements for portable heating tools and similar appliances
家用和类似用途电器的安全 冷热饮水机的特殊要求 Safety of household and similar electrical appliances-Particular requirements for cold and hot type drinking-water appliances
家用和类似用途电器的安全 投影仪和类似用途器具的特殊要求 Safety of household and similar electrical appliances-Particular requirements for projectors and similar appliances
家用和类似用途电器的安全 贮热式房间加热器的特殊要求 Safety of household and similar electrical appliances-Particular requirements for thermal storage room heaters
家用和类似用途电器的安全 空气净化器的特殊要求 Safety of household and similar electrical appliances-Particular requirements for air-cleaning appliances
家用和类似用途电器的安全 挤奶机的特殊要求 Safety of household and similar electrical appliances-Particular requirements for milking machines
家用和类似用途电器的安全 动物繁殖和饲养用电加热器的特殊要求 Safety of household and similar electrical appliances-Particular requirements for electrical heating appiances for breeding and rearing animals
家用和类似用途电器的安全 加湿器的特殊要求 Safety of household and similar electrical appliances--Particular requirements for humidifers
家用和类似用途电器的安全 废弃食物处理器的特殊要求 Safety of household and similar electrical appliances--Particular requirements for food waste disposers
点型感烟火灾探测器技术要求及试验方法 Technical requirements and test methods for point type smoke fire detectors
点型感温火灾探测器技术要求及试验方法 Technical requirements and test methods for heat sensitive point type fire detectors
火灾报警控制器通用技术条件 General technical conditions for fire alarm control units
火灾报警设备专业术语 Terms in connection with fire alarm equipments
放射卫生防护基本标准 Basic health standards for radiological protection
农药乳油包装 Packaging for emulsifiable concentrates of pesticides
声学 校准测听设备的基准零级 第1部分:压耳式耳机纯音基准等效阈声压级 Acoustics--Reference zero for the calibration of audiometric equipment--Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones
声学 校准测听设备的基准零级 第4部分:窄带掩蔽噪声的基准级 Acoustics--Reference zero for the calibration of audiometric equipment--Part 4: Reference levels for narrow-band masking noise
声学 校准测听设备的基准零级 第7部分:自由场与扩散场测听的基准听阈 Acoustics--Reference zero for the calibration of audiometric equipment--Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions
海洋石油开发工业含油污水排放标准 Effluent standards for oil-bearing waste water from offshore petroleum development industry
水泥厂大气污染物排放标准 Emission standard of air pollutants for cement plant
工业废水 总硝基化合物的测定 分光光度法 Waste water from manufacturing process--Determination of total nitro compounds--Spectrophotometric method
工业废水 总硝基化合物的测定 气相色谱法 Waste water from manufacturing process--Determination of total nitro compounds--Gas chromatographic method
硫酸浓缩尾气硫酸雾的测定 铬酸钡比色法 Determination of sulphuric acid mist in tail gas in sulphuric acid concentration process--Barium chromate colorimetric method
工业废 耗氧值和氧化氮的测定 重铬酸钾氧化、萘乙二胺比色法 Waste gas from manufacturing process--Determination of chemical oxygendemand and nitrogen oxide--Potassium dichromate oxidation and naphthylethylene diamine colorimetric method
火灾分类 Classification of fires
汽车平顺性随机输入行驶试验方法 Method of random input running test--Automotive ride comfort
起重吊运指挥信号 The commanding signal for lifting and moving
生产设备安全卫生设计总则 General rules for designing the production facilities in accordance with safety and health requirements
农田灌溉水质标准 Standards for irrigation water quality
危险废物鉴别标准 腐蚀性鉴别 Identification standard for hazarvdous wastes--Identification for corrosivity
危险废物鉴别标准 急性毒性初筛 Identification standard for hazardous wastes--Screening test for acute toxicity
危险废物鉴别标准 浸出毒性鉴别 Identification standard for hazardous wastes--Identification for extraction procedure toxicity
固体废物浸出毒性浸出方法 翻转法 Test method standard for leaching toxicity of solid wastes--Roll over leaching procedure
固体废物浸出毒性浸出方法 水平振荡法 Test method standard for leaching toxicity of solid wastes-- Horizontal vibration extraction procedure
有色金属工业固体废物腐蚀性试验方法标准 Test method standard for corrosivity of solid waste in nonferrous metal industry
自动喷水灭火系统 洒水喷头的技术要求和试验方法 Automatic sprinkler system requirements and methods of test for sprinklers
电工电子产品着火危险试验 第4部分:着火试验术语 Fire hazard testing for electric and electronic products-Part 4: Terminology concerning fire tests
电工电子产品着火危险试验 着火危险评定技术要求和试验规范制订导则 总则 Fire hazard testing for electric and electronic products--Guidance for the preparation of requirements and test specification for assessing fire hazard--General guidance
电工电子产品着火危险试验 电子元件着火危险评定技术要求和试验规范制订导则 Fire hazard testing for electric and electronic products--Guidance for the preparation of requirements and test specifications for assessing fire hazard of electronic compouments
电工电子产品着火危险试验 第2部分:试验方法 第2篇:针焰试验 Fire hazdrd testing for electric and electronic products-Part 2: Test methods-Section 2: Needle-flame test
电工电子产品着火危险试验 用发热器的不良接融试验方法 Fire hazard testing for electronic and electronic products--Test method of bad connection with heater
电工电子产品着火危险试验 评定试验规程举例和试验结果解释 燃烧特性及其试验方法的评述 Fire hazard testing for electric and electronic produts--Examples of fire hazard assessment procedures and interpretation of results--Combustion characterisics and suruey of test methods for their determination
电工电子产品着火危险试验着火危险评定技术要求和试验规范制订导则 预选规程使用导则 Fire hazard testing for electric and electronic products--Guidance for the preparation of requirements and test specification for assessing fire hazard--Guidance for use of preselection procedures
电工电子产品着火危险试验 试验方法 灼热丝试验方法--总则 Fire hazard testing for electric and electronic products--Test methods--Glow-wire test methods--General
电工电子产品着火危险试验 试验方法 成品的灼热丝试验和导则 Fire hazard testing for electric and electronic products--Test methods--Glow-wire end-product test and guidance
电工电子产品着火危险试验 试验方法 材料的灼热丝可燃性试验 Fire hazard testing for electric and electronic products-Test methods-Glow-wire flammability test on materials
电工电子产品着火危险试验 试验方法 材料的灼热丝起燃性试验 Fire hazard testing for electric and electronic products-Test methods-Glow-wire ignitability test on materials
粒子加速器辐射防护规定 The rule for radiation protection of particle accelerators
汽车排放术语和定义 Automotive emission-Terms and definitions
职业照射个人监测规范 外照射监测 Specifications of individual monitoring for occupational exposurc Individual monitoring for external exposure
消费品使用说明 家用和类似用途电器的使用说明 Instructions for use of products of consumer interest-Instructions for use of household and similar electrical appliances
建筑材料不燃性试验方法 Non-combustibility test method of building materials
摩托车排气污染物的测量 怠速法 Measurement method for exhaust emissions from motorcycle at idle speed
锅炉烟尘测试方法 Measurement method of smoke and dust emission from boilers
人类工效学照明术语 Terms of lighting for ergonomics
用于技术设计的人体测量基础项目 Basic human body measurements for technological design
人体测量仪器 人体测高仪 Measuring instruments for anthropometry--Anthropometer
人体测量仪器 人体测量用直脚规 Measuring instruments for anthropometry--Sliding caliper for anthropometry
人体测量仪器 人体测量用弯脚规 Measuring instruments for anthropometry--Spreading caliper for anthropometry
人体测量仪器 人体测量用三脚平行规 Measuring instruments for anthropometry--Coordinate caliper for anthropometry
安全网 Safety nets
作业场所空气中粉尘测定方法 Methods for airborne dust measurement in work place
生活饮用水卫生标准 Sanitary standard for drinking water
生活饮用水标准检验法 Standard examination method for drinking water
生产性粉尘作业危害程度分级 Classification of hazard levels due to exposure to industrial dust
消防基本术语 第一部分 Fundamental terminology of fire protection--Part 1
石油储罐阻火器阻火性能和试验方法 The quenching abilitv of flame arresters and its test method for petroleum tanks
三氟一溴甲烷灭火剂 (1301灭火剂) Fire extinguishing agent of bromotrifluoromethane
安全带 Safety belts
安全带检验方法 Inspect and examine method for safety belts
长管面具 Long tube respirators
长管面具性能试验方法 Performance test methods of long tube respirators
工业企业煤气安全规程 Safety code for gas of industrial enterprises
自吸过滤式防微粒口罩 Self-inhalation filter type particle respirator
过滤式防微粒口罩总透漏率的试验方法 Test method for total inward leakage of filtering particle respirator
过滤式防微粒口罩过滤效率的试验方法 Test method for filter efficiency of filtering particle respirator
过滤式防微粒口罩死腔的试验方法 Test method for the dead space of filtering particle respirator
过滤式防微粒口罩对空气流呼吸阻力的试验方法 Test method for air flow resistance of respiration of filtering particle respirator
消防车通用底盘系列、型式、基本参数和技术要求 The general chassis of fire fighting vehicles series, types, basic parameters and technical requirements
消防泵性能要求和试验方法 Performance requirements and test methods for fire pumps
有衬里消防水带性能要求和试验方法 Lined fire hose--Performance requirements and test methods
企业职工伤亡事故分类 The classification for casualty accidents of enterprise staff and workers
柴油机排放试验方法--第一部分: 汽车及工程机械用 Diesel engine exhaust emission--Test method--Part 1: Automobile and construction machinery applications
涂装作业安全规程 涂漆工艺安全及其通风净化 Safety code for painting--Safety, ventilation and air clean-up for painting process
安全色卡 Safety colour card
建筑材料放射性核素限量 Limit of radionuclides in building materials
带电作业用屏蔽服装 Screen clothes for live working
带电作业用屏蔽服装试验方法 Test procedure of screen clothes for live working
企业职工伤亡事故经济损失统计标准 Statistical standard of economic losses from injury--fatal accidents of enterprise staff and workers
爆破安全规程 Safety regulations for blasting practices
水中锶-90 放射化学分析方法 发烟硝酸沉淀法 Radiochemical analysis of strontium-90 in water--Precipitation by fuming nitric acid
水中锶-90放射化学分析方法 离子交换法 Radiochemical analysis of strontium-90 in water--Ion exchange method
水中锶-90 放射化学分析方法 二-(2-乙基己基) 磷酸萃取色层法 Radiochemical analysis of strontium-90 in water--Extraction chromatography by di-(2-ethylhexyl) phosphori acid
水中铯-137放射化学分析方法 Radiochemical analysis of cesium-137 in water
水中微量铀分析方法 Methods of analysing microquantity of uranium in water
水质 词汇 第一部分和第二部分 Water quality--Vocabulary--Part 1 and part 2
锅炉用水和冷却水分析方法 通则 Methods for analysis of water for boiler and for cooling--General rule
锅炉用水和冷却水分析方法 pH的测定 玻璃电极法 Methods for analysis of water for boiler and for cooling--The determination of pH--The glass electrode method
锅炉用水和冷却水分析方法 pH的测定 比色法 Methods for analysis of water for boiler and for cooling--The determination of pH--Colorimetric method
锅炉用水和冷却水分析方法 pH的测定 用于纯水的玻璃电极法 Analysis of water used in boiler and cooling system--Determination of pH--The glass electrode method for pure water
锅炉用水和冷却水分析方法 氯化物的测定 摩尔法 Methods for analysis of water for boiler and for cooling--The determination of chloride--The Mohr method
锅炉用水和冷却水分析方法 氯化物的测定 电位滴定法 Methods for analysis of water for boiler and for cooling--The determination of chloride--Potentiometric titration
锅炉用水和冷却水分析方法 氯化物的测定 汞盐滴定法 Methods for analysis of water for boiler and for cooling--The determination of chloride--Method of mercurimetric titration
锅炉用水和冷却水分析方法氯化物的测定 共沉淀富集分光光度法 Analysis of water used in boiler and cooling system--Determination of chloride--Coprecipitation concentration and spectrophotometry
锅炉用水和冷却水分析方法 联氨的测定 Methods for analysis of water for boiler and for cooling--The determination of hydrazine
锅炉用水和冷却水分析方法 水样的采集方法 Methods for analysis of water for boiler and for cooling--The sampling method for water
锅炉用水和冷却水分析方法 电导率的测定 Methods for analysis of water for boiler and for cooling--The determination of electrical conductivity for water
锅炉用水和冷却水分析方法 硬度的测定 高硬度 Methods for analysis of water for boiler and for cooling--The determination of hardness--High hardness
锅炉用水和冷却水分析方法 硬度的测定 低硬度 Methods for analysis of water for boiler and for cooling--The determination of hardness--Low hardness
锅炉用水和冷却水分析方法 钙的测定 络合滴定法 Methods for analysis of water for boiler and for cooling--The determination of calcium--Complexometric titration
锅炉用水和冷却水分析方法 硫酸盐的测定 重量法 Methods for analysis of water for boiler and for cooling--The determination of sulfate--Gravimetric method
锅炉用水和冷却水分析方法 硫酸盐的测定 铬酸钡光度法 Methods for analysis of water for boiler and for cooling--The determination of sulfate--Photometric method as barium chromate
锅炉用水和冷却水分析方法 硫酸盐的测定 电位滴定法 Methods for analysis of water for boiler and for cooling--The determination of sulfate--Potentiometric titration method
锅炉用水和冷却水分析方法 硝酸盐和亚硝酸盐的测定 硝酸盐紫外光度法 Methods for analysis of water for boiler and for cooling--The determination of nitrates and nitrites--Ultraviolet spectrophotometry for nitrates
锅炉用水和冷却水分析方法 硝酸盐和亚硝酸盐的测定 亚硝酸盐紫外光度法 Methods for analysis of water for boiler and for cooling--The determination of nitrates and nitrites-- Ultraviolet spectrophotometry for nitrites
锅炉用水和冷却水分析方法 硝酸盐和亚硝酸盐的测定 α-萘胺盐酸盐光度法 Methods for analysis of water for boiler and for cooling--The determination of nitrates and nitrites--Alpha-naphthylamine hydrochloride photometric method
锅炉用水和冷却水分析方法 磷酸盐的测定 正磷酸盐 Methods for analysis of water for boiler and for cooling--The determination of phosphates--Orthophosphates
锅炉用水和冷却水分析方法 磷酸盐的测定 总无机磷酸盐 Methods for analysis of water for boiler and for cooling--The determination of phosphates--Total inorganic phosphates
锅炉用水和冷却水分析方法 磷酸盐的测定 总磷酸盐 Methods for analysis of water for boiler and for cooling--The determination of phosphates--Total phosphates
锅炉用水和冷却水分析方法 磷酸盐的测定 Analysis of water used in boiler and cooling system--Determination of phosphate
空气质量 词汇 Air quality--Vocabulary
水质 pH值的测定 玻璃电极法 Water quality--Determination of pH value--Glass electrode method
大气飘尘浓度测定方法 Determination of the concentration of airborne particulate matters
危险货物分类和品名编号 Classification and code of dangerous goods
放射性废物固化体长期浸出试验 Long-term leach testing of solidified radioactive waste forms
移动式木直梯安全标准 Safety standard for wood portable vertical ladder
移动式木折梯安全标准 Safety standard for wood portable stepladder
移动式轻金属折梯安全标准 Safety standard for light metals portable stepladder
非密封放射性物质 识别和证书 Unsealed radioactive substances--Identification and certification
交流系统用碳化硅阀式避雷器 Silicon carbide surge arresters for A.C.systems
大气中铅及其无机化合物的卫生标准 Sanitary standard for lead and it's inorganic compounds in the atmosphere
电子设备雷击保护导则 Guidance for lightning protection for electronic equipments
水质 总铬的测定 Water quality--Determination of total chromium
水质 六价铬的测定 二苯碳酰二肼分光光度法 Water quality--Determination of chromium (Ⅵ)--1,5 Diphenylcarbohydrazide spectrophotometric method
水质 总汞的测定 冷原子吸收分光光度法 Water quality--Determination of total mercury--Cold atomic absorption spectrophometry
水质 总汞的测定 高锰酸钾- 过硫酸钾消解法 双硫腙分光光度法 Water quality--Determination of the total mercury--Potassium permanganate-pootassium peralfate descomposed method--Dithizone spectrophotometric method
水质 铅的测定 双硫腙分光光度法 Water quality--Determination of lead--Spectrophotometric method with dithizone
水质 镉的测定 双硫腙分光光度法 Water quality--Determination of cadmium--Spectrophotometric method with dithizone
水质 锌的测定 双硫腙分光光度法 Water quality--Determination of zinc--Spectrophotometric method with dithizone
水质 铜的测定 2,9-二甲基-1,10-菲罗啉分光光度法 Water quality--Determination of copper--2,9-dimethy-1,10-phenanthroline spectrophotometric method
水质 铜的测定 二乙基二硫代氨基甲酸钠分光光度法 Water quality--Determination of copper--Sodium diethyldithiocabamate spectrophotometric method
水质 铜、锌、铅、镉的测定 原子吸收分光光谱法 Water quality--Determination of copper, zinc, lead and cadmium--Atomic absorption spectrometry
水质 钙的测定 EDTA滴定法 Water quality--Determination of calcium--EDTA titrimetric method
水质 钙和镁总量的测定 EDTA滴定法 Water quality--Determination of the sum of calcium and magnesium--EDTA titrimetric method
水质 铵的测定 蒸馏和滴定法 Water quality--Determination of ammonium--Distillation and titration method
水质 铵的测定 纳氏试剂比色法 Water quality--Determination of ammonium--Nessler's reagent colorimetric method
水质 硝酸盐氮的测定 酚二磺酸分光光度法 Water quality--Determination of nitrate--Spectrophotometric method with phenol disulfonic acid
水质 铵的测定 水杨酸分光光度法 Water quality--Determination of ammonium--Spectrophotometric method with salicylic acid
水质 氟化物的测定 茜素磺酸锆目视比色法 Water quality--Determination of fluoride--Visual colorimetry with zirconium alizarinsulfonate
水质 氟化物的测定 氟试剂分光光度法 Water quality--Determination of fluoride--Fluor reagent spectrophotometric
水质 氟化物的测定 离子选择电极法 Water quality--Determination of fluoride--Ion selective electrode method
水质 总砷的测定 二乙基二硫代氨基甲酸银分光光度法 Water quality--Determination of total arsenic--Silver diethyldithiocarbamate spectrophotometric method
水质 氰化物的测定 第一部分: 总氰化物的测定 Water quality--Determination of cyanide--Part 1: Determination of total cyanide
水质 氰化物的测定 第二部分: 氰化物的测定 Water quality--Determination of cyanide--Part 2: Determination of cyanide
水质 五日生化需氧量(BOD5)的测定 稀释与接种法 Water quality--Determination of biochemical oxygen demand after 5 days(BOD5)--Dilution and seeding method
水质 溶解氧的测定 碘量法 Water quality--Determination of dissolved oxygen--Iodometric method
水质 挥发酚的测定 蒸馏后4-氨, 基安替比林分光光度法 Water quality--Determination of volatile phenolic compounds--After distillation by means of 4-AAP spectrophotometric method
水质 挥发酚的测定 蒸馏后溴化容量法 Water quality--Determination of volatile phenolic compounds--After distillation with bromine method
水质 六六六、滴滴涕的测定 气相色谱法 Water quality--Determination of BHC and DDT--Gas chromatography
水质 亚硝酸盐氮的测定 分光光度法 Water quality--Determination of nitrogen (nitrite)--Spectrophotometric method
水质 阴离子表面活性剂的测定 亚甲蓝分光光度法 Water quality--Determination of anionic surfactants--Methylene blue spectrophotometric method
架空电力线路与调幅广播收音台的防护间距 The protecting distance between overhead power line and receiving station of AM broadcasting
声学 护听器 第2部分:戴护听器时有效的A计权声压级估算 Acoustics--Hearing protectors--Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
门和卷帘的耐火试验方法 Fire-resistance tests method of door and shutter assemblies
涂装作业安全规程 涂漆前处理工艺安全及其通风净化 Safety code for painting--Safety,ventilation and air clean-up for pretreatment process of painting
危险货物命名原则 The rule of nomenclature for dangerous goods
职业性接触性皮炎诊断标准及处理原则 Diagnostic criteria and principles of management of occupational contact dermatitis
消防车消防性能要求和试验方法 Fire performance requirements and test methods for vehicle
矿用安全帽灯 Safety cap lamp for mines
粪便无害化卫生标准 Sanitary standard for the non-hazardous treatment of night soil
车用电子警报器 Vehicle-used electronic siren
推车式灭火器性能要求和试验方法 Characteristics and tests for transportable fire extinguishers
矿用一氧化碳过滤式自救器 Mine filter self rescuer for carbon monoxide
矿用一氧化碳过滤式自救器试验方法 Test methods of mine filter self rescuer for carbon monoxide
生活饮用水源水中铍卫生标准 Hygienic standard for beryllium in drinking water sources
城镇垃圾农用控制标准 Control standards for urban wastes for agricultural use
农用粉煤灰中污染物控制标准 Control standards of pollutants in fly ash for agricultural use
冲压车间安全生产通则 General rules to safety production of pressing shop
消防水枪性能要求和试验方法 Performance requirements and test methods for fire water branch
柴油机排放术语 Diesel engine emissions--Nomenclature and terminology
往复式内燃机 排放测量 第1部分: 气体和颗粒排放物的试验台测量 Reciprocating internal combustion engines--Exhaust emission measurement--Part 1: Test-bed measurement of gaseous and particulate exhaust emissions
往复式内燃机 排放测量 第2部分: 气体和颗粒排放物的现场测量 Reciprocating internal combustion engines-Exhaust emission measurement--Part 2: Measurement of gaseous and particulate exhaust emissions at site
往复式内燃机 排放测量 第4部分: 不同用途发动机的试验循环 Reciprocating internal combustion engines-Exhaust emission measurement--Part 4: Test cycles for different engine applications
柴油机排气中总碳氢化合物的测定 氢火焰离子化法 Diesel engine emissions--Determination of total hydrocarbons--Hydrogen flame ionization method (HFID)
炼油厂卫生防护距离标准 Health protection zone standard for oil refinery
机械设备防护罩安全要求 Sefety requirement of guard on machinery
防护屏安全要求 Safety requirement of shield
低压测电器 Low voltage tester
救生艇筏饮用水 Drinking water for survival craft
医用X射线诊断放射卫生防护要求 Recuirements for radiological protection in medical X-ray diagnosis
塑料燃烧性能试验方法 烟密度法 Test method for flammability of plastics--Smoke density test
泡沫塑料燃烧性能试验方法 水平燃烧法 Test method for flammability of cellular plastics--Horizontal burning method
硬泡沫塑料燃烧性能试验方法 垂直燃烧法 Test method for flammability of rigid cellular plastics--Virtical burning method
汽车内饰材料的燃烧特性 Flammability of automotive interior materials
视觉信号表面色 Surface colors for visual signalling
灯光信号颜色 Colors of light signals
建筑材料燃烧性能分级方法 Classification on burning behaviour for building materials
建筑材料难燃性试验方法 Test method of difficult-flammability for building materials
建筑材料可燃性试验方法 Test method of flammability for building materials
电磁辐射防护规定 Regulations for electromagnetic radiation protection
辐射防护规定 Regulations for radiation protection
电视教室座位布置范围和照度卫生标准 Hygienic standards for seat arrangement and illumination in classroom with television
车间空气中丙烯酸甲酯卫生标准 Hygienic standard for methylacrylate in the air of workplace
车间空气中锑及其化合物卫生标准 Hygienic standard for antimony and its compounds in the air of workplace
车间空气中氯丙烯卫生标准 Hygienic standard for allyl chloride in the air of workplace
车间空气中甲基丙烯酸甲酯卫生标准 Hygienic standard for methyl methacrylate in the air of workplace
车间空气中六氟化硫卫生标准 Hygienic standard for sulfur hexafluoride in the air of workplace
车间空气中磷胺卫生标准 Hygienic standard for phosphamidon in the air of workplace
车间空气中氢化锂卫生标准 Hygienic standard for lithium hydride in the air of workplace
车间空气中二甲基乙酰胺卫生标准 Hygienic standard for dimethyl acetamide in the air of workplace
居住区大气中一氧化碳卫生标准检验方法 汞置换法 Hygienic determination method of carbon monoxide in air of residential areas--Method of replacing mercury
居住区大气中砷化物卫生标准检验方法 二乙氨基二硫代甲酸银分光光度法 Hygienic determination method of arsenide in air of residential areas--Silver diethyldithiocarbamate spectrophotometric method
居住区大气中二氧化硫卫生标准检验方法 四氯汞盐盐酸副玫瑰苯胺分光光度法 Hygienic determination method of sulfur dioxide in air of residential areas--Tetrachloromercurate (TCM)-pararosaniline spectrophotometric method
居住区大气中汞卫生标准检验方法 金汞齐富集- 原子吸收法 Hygienic determination method of mercury in air of residential areas--Gold amalgamation-atomic adsorption spectrometric method
土壤中砷的卫生标准 Hygienic standard for arsenic in soil
磷肥放射性镭-226限量卫生标准 Limit standard of radioactive Ra-226 in phosphate fertilizer
油(气)田测井用密封型放射源放射卫生防护标准 Radiological health protection standard for using sealed radioactive sources in oil and gas-fild logging
玻璃纤维增强塑料燃烧性能试验方法 氧指数法 Test method for flammability characteristics of glass fiber reinforced plastics using the oxygen index method
缺氧危险作业安全规程 Safety regulation for working under hazardous condition of the oxygen deficiency
铸造防尘技术规程 Dust control code for foundry
阻燃防护服 Flame-retardant protective clothing
空气质量 氮氧化物的测定 盐酸萘乙二胺比色法 Air quality--Determination of nitrogen oxides in ambient air--Griess-saltzman method
空气质量 二氧化硫的测定 四氯汞盐- 盐酸副玫瑰苯胺比色法 Air quality--Determination of sulfur dioxide in ambient air--Tetrachloromercurate(TCM)-pararosaniline method
空气质量 飘尘中苯并(a)芘的测定 乙酰化滤纸层析荧光分光光度法 Air quality--Determination of benzo(a) pyrene in flying bust--Acetylated paper chromatography fluorescence spectrophotometric method
水质 五氯酚的测定 气相色谱法 Water quality--Determination of pentachlorophenol--Gas chromatography
污水综合排放标准 Integrated wastewater discharge standard
硅(锂)X射线探测器系统测试方法 Test procedures for Si(Li) X-ray--Detector systems
工业炉窑大气污染物排放标准 Emission standard of air pollutants for industrial kiln and furnace
工业炉窑烟尘测试方法 Determination of the smoke and dust of industrial kiln and furnace
低中水平放射性固体废物的浅地层处置规定 Regulations for shallow ground disposal of solid low-and intermediate-level radioactive wastes
放射性废物的分类 Classification of radioactive waste
轻水堆核电厂放射性固体废物处理系统技术规定 The technical rules about solid radioactive waste processing system for light water reactor plants
轻水堆核电厂放射性废液处理系统技术规定 The technical rules about radioactive waste processing system for light water reactor plants
轻水堆核电厂放射性废气处理系统技术规定 The technical rules about gaseous redioactive waste processing system for light water reacter plants
保护农作物的大气污染物最高允许浓度 Maximum allowable concentration of pollutants in atmosphere for protection crops
环境电磁波卫生标准 Hygienic standard for environmental electromagnetic waves
柴油机稳态排气烟度及测定方法 Diesel engine--Exhaust smoke measurement method at steady state
柴油机自由加速排气烟度的测量方法 Diesel engines--Exhaust smoke measurement method at free acceleration
旅店业卫生标准 Hygienic standard for hotel
文化娱乐场所卫生标准 Hygienic standard for public place of entertainment
公共浴室卫生标准 Hygienic standard for public bathroom
理发店、美容店卫生标准 Hygienic standard for barber shop and beauty shop
游泳场所卫生标准 Hygienic standard for swimming place
体育馆卫生标准 Hygienic standard for gymnasium
图书馆、博物馆、美术馆、展览馆卫生标准 Hygienic standard for library, museum,art gallery and exhibition
商场(店)、书店卫生标准 Hygienic standard for shopping centre and book store
医院候诊室卫生标准 Hygienic standard for hospital waiting room
公共交通等候室卫生标准 Hygienic standard for waiting room of publictransit means
公共交通工具卫生标准 Hygienic standard for public means of transportation
出口革皮劳动保护手套检验规程 Rule of inspection of leather working gloves for export
空气质量 一氧化碳的测定 非分散红外法 Air quality--Determination of carbon monoxide--Non-disperisive infrared spectrometry
空气质量 总悬浮微粒的测定 (重量法) Air quality--Determination of total suspended particulates--Gravimetric method
水质 五氯酚的测定 藏红T分光光度法 Water quality--Determination of pentachlorophenol by safranine-T spectrophotometric method
烟度卡标准 Standard for smokemetric tablet
浸水保温服 Immersion suits
建筑构件耐火试验方法 Fire-resistance tests--Elements--Elements of building construction
中国成年人人体尺寸 Human dimensions of Chinese adults
城市区域环境振动标准 Standard of environmental vibration in urban area
城市区域环境振动测量方法 Measurement method of environmental vibration of urban area
钴-60辐照装置的辐射防护与安全标准 Standards for radiation protection and safety of60 coirradiation facility
液态排出流或地表水β、γ放射性活度连续监测设备 Equipment for continuously monitoring for beta and gamma activity in liquid effluents or in surface waters
辐射防护仪器校准与定度β剂量率仪 Calibration for radiation protection in struments--beta doseratemeters
车间空气中石墨粉尘卫生标准 Hygienic standard for graphite dust in the air of workplace
车间空气中皮毛粉尘卫生标准 Hygienic standard for fur dust in the air of workplace
车间空气中炭黑粉尘卫生标准 Hygienic standard for carbon black dust in the air of workplace
车间空气中珍珠岩粉尘卫生标准 Hygienic standard for perlite dust in the air of workplace
车间空气中云母粉尘卫生标准 Hygienic standard for mica dust in the air of workplace
车间空气中活性炭粉尘卫生标准 Hygienic standard for active carbon dust in the air of workplace
入侵探测器 第1部分: 通用要求 Detectors for intruder alarm systems Part 1: Requirements for detectors--General
入侵探测器 第2部分: 室内用超声波多普勒探测器 Detectors for intruder alarm systems Part 2: Ultrasonic doppler detectors for use in buildings
入侵探测器 第3部分: 室内用微波多普勒探测器 Detectors for intruder alarm systems Part 3: Microwave doppler detectors for use in building
入侵探测器 第4部分: 主动红外入侵探测器 Detectors for intruder alarm systems Part 4: Active infrared intrusion detectors
入侵探测器 第5部分: 室内用被动红外探测器 Detectors for intruder alarm systems Part 5: Passive infra-red detectors for use in buildings
超声和被动红外复合入侵探测器 Combination ultrasonic and passive infrared intrusion detector
振动入侵探测器 Vibration intrusion detectors
入侵探测器 第9部分: 室内用被动式玻璃破碎探测器 Detectors for intruder alarm systems Part 9: Passive glass-break detectors for use in buildings
防盗保险柜 Burglary resistant safes
作业场所局部振动卫生标准 Hygienic standard for hand-transmitted vibration in the work environment
作业场所激光辐射卫生标准 Hygienic standard for laser radiation in the work environment
作业场所微波辐射卫生标准 Hygienic standard for microwave radiation in the work environment
作业场所超高频辐射卫生标准 Hygienic standard for ultra high frequency radiation in the work environment
煤矿井下采掘作业地点气象条件卫生标准 Hygienic standard for environmental meteorology in underground workplace of coal mine
车间空气中萤石混合性粉尘卫生标准 Hygienic standard for mixed dust from fluorspar in the air of workplace
水处理剂 硫酸亚铁 Water treatment chemicals - Ferrous sulphate
水处理剂 水解聚马来酸酐 Water treatment chemicals--Hydrolyzed polymaleic anhydride
锅炉用水和冷却水分析方法 季胺盐的测定 三氯甲烷萃取分光光度法 Analytical methods for boiler water and cooling water - Determination of quoaternary ammoniam salte - Trichloromethane extraction spectrophotometry
锅炉用水和冷却水分析方法 钾离子的测定 火焰光度法 Analytical methods for boiler water and cooling water - Determination of potassium - Flame photometry
水中镭-226 的分析测定 Analytical determination of radium-226 in water
土壤中钚的测定 萃取色层法 Determination of plutonium in soil - Extraction chromatography method
土壤中钚的测定 离子交换法 Determination of plutonium in soil?Ion exchange method
土壤中铀的测定 CL-5209 萃淋树脂分离2-(5-溴-2-吡啶偶氮)-5-二乙氨基苯酚分光光度法 Determination of uranium in soil?CL-5209 extractant-containing resin separation 2-(5-bromo-2-pyridylazo)-5-diethlaminophenol spectrophotometry
土壤中铀的测定 三烷基氧膦萃取-固体荧光法 Determination of uranium in soil - Trialkylphosphine oxide extraction-solid fluorimetry
生物样品灰中铯-137的放射化学分析方法 Radiochemical analysis of caesium-137 in ash of biological samples
生物样品灰中锶-90的放射化学分析方法 二-(2-乙基己基)磷酸酯萃取色层法 Radiochemical analysis of strontium-90 in ash of biological sampies--Extraction chromatography by di-(2-ethylhexyl) phosphate
生物样品灰中铀的测定 固体荧光法 Analytical determination of uranium in ash of biological samples--Solid fluorimetry
水中钍的分析方法 Analytical method of thorium in water
水中钚的分析方法 Analytical method of plutonium in water
水中钾-40的分析方法 Analytical methods of potassium -40 in water
悬挂输送机安全规程 Safety rules for overhead chain conveyers
车间空气中三氯化磷卫生标准 Hygienic standard for phosphorus trichloride in the air of workplace
车间空气中乙二胺卫生标准 Hygienic standard for ethylenediamine in the air of workplace
车间空气中液化石油气卫生标准 Hygienic standard for liquified petroleum gas in the air of workplace
车间空气中间苯二酚卫生标准 Hygienic standard for resorcinol in the air of workplace
车间空气中甲基丙烯酸环氧丙酯卫生标准 Hygienic standard for glycidyl methacrylate in the air of workplace
车间空气中蛭石粉尘卫生标准 Hygienic standard for vermiculite dust in the air of workplace
车间空气中二氧化钛粉尘卫生标准 Hygienic standard for titanium dioxide dust in the air of workplace
车间空气中氯乙醇卫生标准 Hygienic standard for ethylene chlorohydrin in the air of workplace
车间空气中丙烯酰胺卫生标准 Hygienic standard for acrylamide in the air of workplace
车间空气中百菌清卫生标准 Hygienic standard for chlorothalonile in the air of workplace
车间空气中碳化硅粉尘卫生标准 Hygienic standard for silicon carbide dust in the air of workplace
车间空气中砂轮磨尘卫生标准 Hygienic standard for grinding wheel dust in the air of workplace
车间空气中钴及其氧化物卫生标准 Hygienic standard for cobalt and its oxides in the air of workplace
车间空气中三甲苯磷酸酯卫生标准 Hygienic standard for tricresyl phosphate in the air of workplace
车间空气中铜尘(烟)卫生标准 Hygienic standard for copper dust and fume in the air of workplace
车间空气中抽余油(50~220℃)卫生标准 Hygienic standard for raffinate (50~220℃) in the air of workplace
渔业水质标准 Water quality standard for fisheries
劳动防护用品选用规则 Selection rules of articles for labour protection use
烟花爆竹劳动安全技术规程 Technology regulations for the working safe of fireworks and fireracker
除尘机组技术性能及测试方法 Performance of dust collecting unit and measuring method
硫酸盐造纸厂卫生防护距离标准 Health protection zone standard for vitriol paper mill
氯丁橡胶厂卫生防护距离标准 Health protection zone standard for neoprene plants
黄磷厂卫生防护距离标准 Health protection zone standard for phosphorus plants
铜冶炼厂(密闭鼓风炉型)卫生防护距离标准 Health protection zone standard for copper smeltery (closed blast furnace type)
聚氯乙烯树脂厂卫生防护距离标准 Health protection zone standard for polyvinyl chloride resin plants
铅蓄电池厂卫生防护距离标准 Health protection zone standard for lead storage battery plants
炼铁厂卫生防护距离标准 Health protection zone standard for ironmaking plants
焦化厂卫生防护距离标准 Health protection zone standard for coke-oven plants
烧结厂卫生防护距离标准 Health protection zone standard for sintering plants
硫酸厂卫生防护距离标准 Health protection zone standard for sulphuric acid plants
钙镁磷肥厂卫生防护距离标准 Health protection zone standard for calcium magnesium phosphate fertilizer plants
普通过磷酸钙厂卫生防护距离标准 Health protection zone standard for calcium superphosphate plants
小型氮肥厂卫生防护距离标准 Health protection zone standard for small nitrogenous fertilizer plants
居住区大气中可吸入颗粒物卫生标准 Hygienic standard for inhalable particles in ambient air of residential areas
用于X、γ线外照射放射防护的剂量转换因子 Dose conversion factors for use in protection against X,γ-ray external radiation
用半导体γ谱仪分析低比活度 γ放射性样品的标准方法 Standard methods of analyzing low specific gamma radioactivity samples by semiconductor gamma spectrometers
车间空气中溶剂汽油卫生标准 Health standard for solvent gasolines in the air of workplace
车间空气中敌百虫卫生标准 Health standard for trichlorfon in the air of workplace
车间空气中环氧乙烷卫生标准 Health standard for elthylene oxide in the air of workplace
车间空气中钒及其化合物卫生标准 Health standard for vanadium and its compounds in the air of workplace
车间空气中1,2-二氯乙烷卫生标准 ealth standard for 1,2-dichloroethane in the air of workplace
车间空气中含50%~80%游离二氧化硅粉尘卫生标准 Health standard for dust containing 50% ~ 80% free silica in the air of workplace
车间空气中含80%以上游离二氧化硅粉尘卫生标准 Health standard for dust containing more than 80% free silica in the air of workplace
车间空气中铝、氧化铝、铝合金粉尘卫生标准 Health standard for dusts of aluminium, aluminium oxid and aluminium alloys in the air of workplace
土壤中铜的卫生标准 Hygienic standard for copper in soil
水源水中百菌清卫生标准 Hygienic standard for chlorothalonile in drinking water sources
农村生活饮用水量卫生标准 Hygienic standard for water consumption in rural areas
居住区大气中硝基苯卫生检验标准方法 气相色谱法 Standard method for hygienic examination of nitrobenzene in air of residential areas - Gas chromatography
居住区大气中吡啶卫生检验标准方法 氯化氰- 巴比妥酸分光光度法 Standard method for hygienic examination of pyridine in air of residential areas - Cyanogen chloride-barbituric acid apectrophotometric method
居住区大气中硫酸盐卫生检验标准方法 离子色谱法 Standard method for hygienic examination of inorganic sulfate in air of residential areas - Ion chromatography
居住区大气中甲基-1605卫生检验标准方法 气相色谱法 Standard method for hygienic examination of methylparathion in air of residential areas?Gas chromatography
居住区大气中铍卫生检验标准方法 桑色素荧光分光光度法 Standard method for hygienic examination of beryllium in air of residential areas - Morin fluorescence spectrophotometric method
居住区大气中氯卫生检验标准方法 甲基橙分光光度法 Standard method for hygienic examination of chlorine in air of residential areas - Methyl orange spectrophotometric method
居住区大气中苯、甲苯和二甲苯卫生检验标准方法 气相色谱法 Standard method for hygienic examination of benzene, toluene and xylene in air of residential areas - Gas chromatography
居住区大气中甲醇、丙酮卫生检验标准方法 气相色谱法 Standard method for hygienic examination of methanol and acetone in air of residential areas - Gas chromatography
居住区大气中铅卫生检验标准方法 原子吸收分光光度法 Standard method for hygienic examination of lead in air of residential areas?Atomic absorption spectrophotometry
居住区大气中镉卫生检验标准方法 原子吸收分光光度法 Standard method for hygienic examination of cadmium in air of residential areas - Atomic absorption spectrophotometry
居住区大气中二硫化碳卫生检验标准方法 气相色谱法 Standard method for hygienic examination of carbon disulfide in air of residential areas?Gas chromatography
居住区大气中硫化氢卫生检验标准方法 亚甲蓝分光光度法 Standard method for hygienic examination of hydrogen sulfide in air of residential areas - Methylene blue spectrophotometric method
土壤中放射性核素的γ能谱分析方法 Gamma spectrometry method of analysing radionuclides in soil
道路交通事故现场图形符号 The graphics symbols - for the scene of road traffic accident
放射性物质安全运输规定 Regulations for the safe transport of radioactive material
水质 苯胺类化合物的测定 N-(1-萘基)乙二胺偶氮分光光度法 Water quality - Determination of aniline compounds - Spectrophotometric method with N-(1-naphthyl) ethy lenediamine
水质 苯系物的测定 气相色谱法 Water quality - Determination of benzene and its analogies--Gas chromatographic method
水质 凯氏氮的测定 Water quality - Determination of kjeldahl nitrogen
水质 高锰酸盐指数的测定 Water quality - Determination of permanganate index
水质 总磷的测定 钼酸铵分光光度法 Water quality?Determination of total phosphorus - Ammonium molybdate spectrophotometric method
水质 总氮的测定 碱性过硫酸钾消解紫外分光光度法 Water quality - Determination of total nitrogen - Alkaline potassium persulfate digestion-UV spectro photo metric method
水质 苯并(α)芘的测定 乙酰化滤纸层析荧光分光光度法 Water quality - Determination of benzo(α)-pyrene - Acetylated paper chromatography with fluorescence spectrophotometric method
水质 氯化物的测定 硝酸银滴定法 Water quality - Determination of chloride - Silver nitrate titration method
水质 游离氯和总氯的测定 N,N-二乙基-1,4-苯二胺滴定法 Water quality - Determination of free chlorine and total chlorine - Titrimetric method using N,N-diethyl-1,4-phenylenediamine
水质 游离氯和总氯的测定 N,N-二乙基 -1,4-苯二胺分光光度法 Water quality - Determination of free chlorine and total chlorine - Spectrophotometric method using N,N-diethyl-1,4-phenylenediamine
水质 硫酸盐的测定 重量法 Water quality - Determination of sulfate - Gravimetric method
水质 痕量砷的测定 硼氢化钾-硝酸银分光光度法 Water quality - Determination of trace amounts of arsenic - Spectrophotometric method with silver salt
水质 悬浮物的测定 重量法 Water quality - Determination of suspended substance - Gravimetric method
水质 硒的测定 2,3-二氨基萘荧光法 Water quality - Determination of selenium - Diaminonaphthalene fluorometric method
水质 色度的测定 Water quality - Determination of colority
水质 钾和钠的测定 火焰原子吸收分光光度法 Water quality - Determination of potassium and sodium - Flame atomic absorption spectrophotometry
水质 钙和镁的测定 原子吸收分光光度法 Water quality - Determination of calcium and magnesium - Atomic absorption spectrophotometric method
水质 锰的测定 高碘酸钾分光光度法 Water quality - Determination of manganese - Potassium periodate spectrophotometric method
水质 银的测定 火焰原子吸收分光光度法 Water quality - Determination of silver - Flame atomic absorption spectrophotometric method
水质 银的测定 镉试剂2B分光光度法 Water quality - Determination of silver - Spectrophotometry with cadion 2B
水质 银的测定 3,5-Br2-PADAP分光光度法 Water quality - Determination of silver - Spectrophotometric method with 3,5-Br2-PADAP
水质 镍的测定 丁二酮肟分光光度法 Water quality - Determination of nickel - Dimethylglyoxime spectrophotometric method
水质 铁、锰的测定 火焰原子吸收分光光度法 Water quality - Determination of irom and manganese - Flame atomic absorption spectrometric method
水质 镍的测定 火焰原子吸收分光光度法 Water quality - Determination of nickel - Flame atomic absorption spectrometric method
水质 溶解氧的测定 电化学探头法 Water quality?Determination of dissolved oxygen?Electrochemical probe method
水质 化学需氧量的测定 重铬酸盐法 Water quality - Determination of the chemical oxyyen demand - Dichromate method
水质 词汇 第三部分~第七部分 Water quality?Vocabulary - Part3 - 7
低、中水平放射性固体废物暂时贮存规定 Regulations for interim storage of low-and intermediate.-level radioactive solid wastes
高水平放射性废液贮存厂房设计规定 Regulations for designing storage building of high level radioactive liquid waste
操作开放型放射性物质的辐射防护规定 Regulation of radiation protection for handling nonsealed radioactive material
水源水中乙醛、丙烯醛卫生检验标准方法 气相色谱法 Standard method for hygienic examination of acetaldehyde and acrolin in drinking water sources - Gas chromatography
水源水中氯丁二烯卫生检验标准方法 气相色谱法 Standard method for hygienic examination of chloroprene in drinking water sources - Gas chromatography
水源水中丙烯酰胺卫生检验标准方法 气相色谱法 Standard method for hygienic examination of acrylamide in drinking water sources?Gas chromatography
水源水中苯系物卫生检验标准方法 气相色谱法 Standard method for hygienic examination of benzenes in drinking water sources - Gas chromatography
水源水中氯苯系化合物卫生检验标准方法 气相色谱法 Standard method for hygienic examination of chlorobenzenes in drinking water sources - Gas chromatography
水源水中二硝基苯类和硝基氯苯类卫生检验标准方法 气相色谱法 Standard method for hygienic examination of dinitrobenzene and nitrochlorobenzene in drinking water sources - Gas chromatography
水源水中巴豆醛卫生检验标准方法 气相色谱法 Standard method for hygienic examination of crotonaldehyde in drinking water sources - Gas chromatography
水源水中硫化物卫生检验标准方法 Standard method for hygienic examination of sulfide in drinking water sources
氯气安全规程 Safety regulation for chlorine
电绝缘鞋通用技术条件 General technical requirements for dielectric footwear
防静电工作服 Working clothing of anti-electrostatic
货运架空索道安全规范 Safety code for material aerial ropeways
二节轻金属拉伸梯安全标准 Safety standard for light-metal extension ladders
防止静电事故通用导则 General quideline for preventing electrostatic accidents
带电作业用铝合金紧线夹具 Aluminium-alloy clamping wire apparatus for live working
带电作业用遮蔽罩 Protective cover for live working
次氯酸钠发生器 Sodium hypochlorite generator
机械安全 防止上肢触及危险区的安全距离 Safety of machinery--safety distances to prevent danger zones being reached by the uppar limbs
机械安全 防止下肢触及危险区的安全距离 Safety of machinery safety distances to prevent danger zones being reached by the lower limbs
机械安全 避免人体各部位挤压的最小间距 Safety of machinery--Minimum gaps to avoid crushing of parts of the human body
机械加工设备一般安全要求 General safety requirements for machining facilities
危险货物品名表 List of dangerous goods
体力搬运重量限值 The limit on carrying-load for physical work
有毒作业分级 Classified standard of operation with exposure to toxic chemicals in the workplace
客运架空索道安全规范 Safety code for passengers aerial ropeways
拱形金属爆破片装置分类与安装尺寸 Classification and mounting dimensions for domed metal bursting disc devices
作业环境气体检测报警仪通用技术要求 Gas monitors and alarms for workplace atmosphere general technical requirements
涂装作业安全规程 静电喷漆工艺安全 Safety code for painting - Safety for electrostatic spray painting process
居住区大气中二氧化氮检验标准方法 改进的 Saltzman 法 Standard method for examination of nitrogen dioxide in air of residential areas?Modified Saltzman method
居住区大气中气态污染物液体吸收法的标准采样装置 Standard sampling equipments of liquid absorbent methods for determining gaseous pollutants in air of residential areas
居住区大气中硝酸盐检验标准方法 镉柱还原- 盐酸萘乙二胺分光光度法 Standard method for examination of nitrate in air of residential areas--Reduction of the cadmium column - Spectrophotometry of N-(1-naphthyl) ethylene diamine hydrochloride
水中氚的分析方法 Analytical method of tritium in water
水中钋-210的分析方法 电镀制样法 Analytical method of polonium-210 in water--Method of preparing sample by electroplating
空气中微量铀的分析方法 激光荧光法 Analytical method of microquantity uranium in air by laser-fluoremetry
空气中微量铀的分析方法 TBP 萃取荧光法 Analytical method of microquantity uranium in air by spectropho to fluoremetry after extraction with TBP
环境核辐射监测规定 Regulations of monitoring for environmental nuclear radiations
耐火材料企业防尘规程 Regulations of dust control for refractory enterprises
饰面型防火涂料通用技术条件 General technical specifications for fire finishing fire retardant paint
危险货物运输包装通用技术条件 General specifications for transport packages of dangerous goods
空气中可燃气体爆炸极限测定方法 Method of test for explosion limits of combustible gases in air
农药贮运、销售和使用的防毒规程 Antitoxic regulations for storage-transportation, marketing and use of pesticides
电工电子设备防触电保护分类 Classification of electrical and electronic equipment with regard to protection against electric shock
镶玻璃构件耐火试验方法 Fire-resistance tests - Glazed elements
消防接口性能要求和试验方法 Performance requirements and test methods for fire coupling
手提贮压式干粉灭火器 Portable dry powder fire extinguishers(stored-pressure)
空气潜水减压技术要求 Technical requirements for air diving decompression
产业潜水最大安全深度 Maximal safety depths for commercial diving
消防船消防性能要求和试验方法 Fire performance requirements and test methods of fire fighting boats
起重机械超载保护装置 安全技术规范 Lifting appliances - Safety devices against overloading - Safety technology code
防护鞋通用技术条件 Modular technical requirements for protective footwear
劳动保护手套通用技术条件 The general specifications for protective gloves and mittens
微波和超短波通信设备辐射安全要求 Safety requirements of radiation for microwave and ultrashort wave communication equipment
爆炸物销毁器技术条件 Specification for disruptor
防盗报警控制器通用技术条件 General specifications for burglar-alarm control units
便携式 X射线安全检查设备技术条件 Specification for portable X-Ray security inspect equipment
焦化安全规程 Safety code for the coking plant
低、中水平放射性固体废物包装安全标准 Standard of safety for low and intermediate-level solid radioactive wast packages
复印机械环境污染测量方法 Environmental pollution measuring methods for copying machine
救生保温用具 Thermal protective aids for life-saving
临界事故报警设备 Warning equipment for criticality accidents
点型紫外火焰探测器性能要求及试验方法 Performance requirements and test methods for point ultraviolet flame detectors
电连接器接触件嵌卸工具总规范 Generic specification for installing and removal tools for connectors electrical contact
抗油拒水防护服安全卫生性能要求 Safety and health requirements for oil resistant and waterproof clothing
声学 紧急撤离听觉信号 Acoustics - Audible emergency evacuation signal
生产过程安全卫生要求总则 General principles for the requirements of safety and health in production process
手持式金属探测器 技术条件 Specification for hand-held metal detectors
个人防护用品术语 Personal protective equipment terminology
景观娱乐用水水质标准 Water quality standard for scenery and recreation area
涂装作业安全规程 有限空间作业安全技术要求 Safety code for painting - Technical requirements of safety for working in confined spaces
地震勘探爆炸安全规程 Safety regulations for seismic exploration blasting practices
离子感烟火灾探测器用镅24lα放射源的技术条件 Specification of americium-24l alpha sources for ionization smoke fire detectors
钢质防火门通用技术条件 General technical conditions for steel fire door
火灾报警设备检验规则 Rules for product test of fire alarm equipments
人类工效学 视觉信息作业基本术语 Ergonomics - Basic terms for visual information proces sing
在产品设计中应用人体尺寸百分位数的通则 General rules of using percentiles of the body dimensions for products design
水质 微型生物群落监测 PFU法 Water quality--Microbial community biomonitoring--PFU method
水质 采样方案设计技术规定 Water quality - Technical regulation on the design of sampling programmes
水质 采样技术指导 Water quality - Guidance on sampling techniques
水质采样 样品的保存和管理技术规定 Water quality sampling - Technical regulation of the preservation and handling of samples
锌- 锰干电池生产防尘毒技术规程 Code for dust and poison control in the production of Zinc-Manganese batteries
含多氯联苯废物污染控制标准 Control standard on poly chlorinated biphenyls for waste slags
带电作业用绝缘滑车 Insulated pulleys for live working
带电作业用绝缘绳索 Insulating rope for live working
水质 有机磷农药的测定 气相色谱法 Water quality - Determination of organic phosphorous pesticide in water - Gas chromatography
水质 总有机碳(TOC) 的测定 非色散红外线吸收法 Water quality - Determination of TOC by nondispersive infrared absorption method
水质 硝基苯、硝基甲苯、硝基氯苯、二硝基甲苯的测定 气相色谱法 Water quality - Determination of nitrobenzene, mononi-trotoluene (MNT), nitrochlorobenzene and oinitrotoluene (ONT) - Gas chromatography
水质 水温的测定 温度计或颠倒温度计测定法 Water quality - Determination of water temperature - Thermometer or reversing thermometer method
水质 硫酸盐的测定 火焰原子吸收分光光度法 Water quality - Determination of sulphate - Flame atomic absorption spectrophotometric method
水质 甲醛的测定 乙酰丙酮分光光度法 Water quality - Determination of formaldehyde - Acetylacetone spectrophotometric method
水质 六种特定多环芳烃的测定 高效液相色谱法 Water quality - Determination of specified six polynuclear aromatic hydrocarbons - High performance liquid chromatography
水质 阴离子洗涤剂的测定 电位滴定法 Water quality - Determination of anionic detergent - Potentiometric method
水质 浊度的测定 Water quality - Determination of turbidity
火电厂大气污染物排放标准 Emission standard of air pollutants for thermal power plants
水质 物质对蚤类(大型蚤)急性毒性测定方法 Water quality - Determination of the acute toxicity of substance to Daphnia (Daphnia magna straus)
水质 物质对淡水鱼(斑马鱼)急性毒性测定方法 Water quality - Determination of the acute toxicity of substance to a freshwater fish (Brachydanio rerio Hamilton-Buchanan)
大气 试验粉尘标准样品 黄土尘 Atmospheric air - Test dust standard sample - Loess dust
大气 试验粉尘标准样品 煤飞尘 Atmospheric air - Test dust standard sample - Fly ash
大气 试验粉尘标准样品 模拟大气尘 Atmospheric air - Test dust standard sample - Simulated atmospheric dust
锅炉大气污染物排放标准 Emission standard of air pollutants for coal-burning oil-burning gas-fired boiler
起重滑车 安全要求 Safety requirement for lifting pulley blocks
锻造车间安全生产通则 General rules to safety production of forge
石油气体管道阻火器阻火性能和试验方法 The quenching ability of flame arrester and its test method for petroleum gas piping systems
液体石油产品静电安全规程 Safety rules of static electricity with relation to liquid petroleum products
大爆破安全规程 Safety regulations for large-scale blast
机动车排气火花熄灭器性能要求和试验方法 The performance requirements and test methods for exhaust spark arrester of vehicle
辐射源和实践的豁免管理原则 Principles for the exemption of radiation sources and practices from regulatory control
晴天采光测量方法 Method of daylighting measurements under clear skies
视觉工效学原则 室内工作系统照明 Principles of visual ergonomics - The lighting of indoor work systems
交流电风扇和调速器 A.C. electric fans and regulators
海洋营运船舶明火作业安全技术要求 Technical requirements for fire working of sea going transport ships
道路运输危险货物车辆标志 The vehicle mark for road transportation dangerous goods
带电作业用绝缘杆通用技术条件 General technich conditions of lnsulating poles for live working
人体全身振动环境的测量规范 Specification for measurement of human exposure to whole-body vibration environment
人体全身振动暴露的舒适性降低界限和评价准则 Reduced comfort boundary and evaluation criteria for human exposure to whole-body vibration
钢铁工业水污染物排放标准 Discharge standard of water pollutants for iron and steel industry
肉类加工工业水污染物排放标准 Discharge standard of water pollutants for meat packing industry
合成氨工业水污染物排放标准 Discharge standard of water pollutants for ammonia industry
劳动防护服 防寒保暖要求 The requirements on insulation of labour protective clothing in cold condition
抗溶性泡沫灭火剂 Alcohol resistant foam extinguishing agent
便携式热催化甲烷检测报警仪 Portable heating catalytic methane alarm detector
橡胶燃烧性能测定 垂直燃烧法 Rubber - Determination of the burning behaviour of vertical specimens
橡胶涂覆织物燃烧性能测定 Rubber coated fabrics - Determination of the burning behaviour
消防安全标志 Fire safety signs
干粉灭火剂通用技术条件 General specifications for powder-extinguishing agent
拆除爆破安全规程 Saftey regulations for explosive demolition
工作空间人体尺寸 Human dimensions in workspaces
电火花加工机床 安全防护技术要求 Electro-discharge machines--Technical requirements for safeguarding
大气降水采样和分析方法总则 General principles for analytical methods of the wet precipitation
大气降水样品的采集与保存 Collection and preservation of the wet precipitation sample
大气降水电导率的测定方法 Determination of specific conductance in the wet precipitation
大气降水pH值的测定 电极法 Determination of pH value of the wet precipitation - Glass electrode method
大气降水中氟、氯、亚硝酸盐、硝酸盐、硫酸盐的测定 离子色谱法 Determination of fluoride, chloride, ntrite, nitrate, salfate in the wet precipitation - Ion chromotography
大气降水中硫酸盐测定 Determination of sulfate in the wet precipitation
大气降水中亚硝酸盐测定 N-(1-萘基)-乙二胺光度法 Determination of nitrite in the wet precipitation - N-(1-naphthyl)-1, 2-diaminoethane dihydrochloride spectrophotometry
大气降水中硝酸盐测定 Determination of nitrate in the wet precipitation
大气降水中氯化物的测定 硫氰酸汞高铁光度法 Determination of chloride in wet precipitation - Ferrithiocyanate spectrophotometry
大气降水中氟化物的测定 新氟试剂光度法 Determination of fluoride in the wet precipitation - Fluor reagent spectrophotometry
大气降水中铵盐的测定 Determination of ammonium in the wet precipitation
大气降水中钠、钾的测定 原子吸收分光光度法 Determination of sodium and potassium in the wet precipitation - Atomic absorption spectrophotometry
大气降水中钙、镁的测定 原子吸收分光光度法 Determination of calcium and magnesium in the wet precipitation - Atomic absorption spectrophotometry
低中水平放射性固体废物的岩洞处置规定 Reguiations for disposal of solid low-and intermediate level radioactive wastes in rock cavities
劳动防护服号型 Size designation of protective clothing
劳动护肤剂通用技术条件 General technical requirements of skin-protective agent for workers
一般防护服 General protective clothing
工业循环冷却水中铜的测定 二乙基二硫代氨基甲酸钠分光光度法 Industrial circulating cooling water?Determination of copper - Sodium diethyldithiocarbamate spectrophotometric method
常用危险化学品的分类及标志 Classification and labels of dangerous chemical substances commonly used
天然矿泉水地质勘探规范 Geologic exploration specification of natural mineral water
有毒作业场所空气采样规范 Air sampling rule of operation with exposure to toxic chemicals in the workplace
铅作业安全卫生规程 Safety and hygiene code for working with lead
燃油式火化机污染物排放限值及监测方法 Limit value and determination of pollutants emission for diesel oil cremator
煤矿用金属材料摩擦火花安全性试验方法和判定规则 Testing method and judging rule of safety to friction spark of metallic material for coal mine
生产过程危险和有害因素分类与代码 Classification and code for the hazardous and harmful factors in production process
用电安全导则 General guide for safety of electric user
电流通过人体的效应 第一部分: 常用部分 Effects of current passing through the human body Part 1: General aspects
电流通过人体的效应 第二部分: 特殊情况 Effects of current passing through the humman body--Part 2: Special aspects
冷冲压安全规程 Safety codes for cold pressing
水质 铅的测定 示波极谱法 Water quality--Determination of Lead--Oscillopolarography
水质 硫氰酸盐的测定 异烟酸-吡唑啉酮分光光度法 Water quality--Determination of thiocyanate--Isonicotinic acid pyrazolone spectrophotometry
水质 铁(Ⅱ、Ⅲ)氰络合物的测定 原子吸收分光光度法 Water quality--Determination of ferro and ferric cyanic complex--Atom absorption spectrophotometry
水质 铁(Ⅱ、Ⅲ)氰络合物的测定 三氯化铁分光光度法 Water quality--Determination of ferro and ferric cyanic complex--Ferric trichloride spectrophotometry
水质 黑索今的测定 分光光度法 Water quality--Determination of RDX--Spectrophotometry
水质 二硝基甲苯的测定 示波极谱法 Water quality--Determination of dinitrotoluene--Oscillopolarography
水质 硝化甘油的测定 示波极谱法 Water quality--Determination of nitroglycerine--Oscillopolarography
水质 梯恩梯的测定 分光光度法 Water quality--Determination of TNT--Spectrophotometry
水质 梯恩梯、黑索金、地恩梯的测定 气相色谱法 Water quality--Determination of TNT, RDX, DNT--Gas chromatography
水质 梯恩梯的测定 亚硫酸钠分光光度法 Water quality--Determination of TNT--Sodium sulfite spectrophotometry
空气质量 氮氧化物的测定 Air quality--Determination of nitrogen oxides
滑石粉加工防尘技术规程 Code of dust control for talc powder processing
关于固定结构特别是建筑物和海上结构的居住者对低频(0.063 - 1Hz)水平运动响应的评价导则 Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off-shor structures, to low-frequency horizontal motion (0.063 - 1Hz)
水处理设备性能试验 总则 Performance test for water treatment equipment--General rules
水处理设备性能试验 离子交换设备 Performance test for water treatment equipment--Ion exchange equipment
水处理设备性能试验 过滤设备 Performance test for water treatment equipment--Filter
水处理设备性能试验 除氧器 Performance test for boiler feed water treatment equipment--Deaerator
线型光束感烟火灾探测器技术要求及试验方法 Technical requirements and test methods for optical beam smoke fire detectors
安装在设备上的同位素仪表的辐射安全性能要求 Radionuclide gauges--Gauges designed for permanent installation
表面污染测定 第一部分:β 发射体(最大β能量大于0.15MeV)和α发射体 Evaluation of surface contamination-Part 1:Beta-emitters(maximum beta energy greater than 0.15MeV)and alpha emitters
放射性污染表面去污 试验与评价去污难易程度的方法 Decontamination of radioactivily contaminated surface--Method for testing and assessing the ease of decontamination
船用卤代烷灭火装置 Marine halon fire extinguishing unit
卤代烷灭火系统选择阀性能要求和试验方法 Halon fire extinguishing systems performance requirements and test methods for selector valves
卤代烷灭火系统单向阀的性能要求和试验方法 Halon fire extinguishing system performance requirements and test methods for check valves
卤代烷灭火系统阀驱动器性能要求和试验方法 Halon fire extinguishing systems performance requirements and test methods for valve actuators
卤代烷灭火系统压力表性能要求和试验方法 Halon fire extinguishing systems Performance requirements and test methods for pressure gauges
消防基本术语 第二部分 Fundamental terminology of fire protection--Part 2
水质 烷基汞的测定 气相色谱法 Water quality--Determination of alkylmercury--Gas chromatography
地下铁道车站站台噪声限值 Noise limits on platform of subway station
地下铁道车站站台噪声测量 Measurement for noise on platform of subway station
带电作业术语 Terminology for live working
可燃气体与易燃液体蒸气最小静电点火能测定方法 Determination of minimum ignition energy of combustible gases and flammable liquid vapors
防水服通用技术条件 The general specifications for water-proof clothing
辐射防护最优化纲要 Guide for optimization of radiation protection
声学 职业噪声测量与噪声引起的听力损伤评价 Acoustics--Determination of occupational noise exposure and estimation of noise-induced hearing impairment
航天推进剂水污染物排放标准 Discharge standard of water pollutants for space propellant
水质 一甲基肼的测定 对二甲氨基苯甲醛分光光度法 Water quality--Determination of monomethyl hydrazine--p-Dimethylaminobenzaldehyde spectrophotometric method
水质 偏二甲基肼的测定 氨基亚铁氰化钠分光光度法 Water quality--Determination of asymmetrical dimethyl hydrazine--Amino ferrocyanide sodium spectrophotometric method
水质 三乙胺的测定 溴酚蓝分光光度法 Water quality--Determination of triethylamine--Bromophenol blue spectrophotometric method
水质 二乙烯三胺的测定 水杨醛分光光度法 Water quality--Determination of diethylenetriamine--Salicyiclaldehyde spectrophotometric method
建筑材料燃烧热值试验方法 Test method of heat of combustion for building materials
建筑材料燃烧释放热量试验方法 Test method of release heat by combustion for building materials
冷水作业分级 Classification of works in cold water
低温作业分级 Classification of works in cold environment
涂装作业安全规程 术语 Safety code for painting--Terminology
毛皮生产安全卫生规程 Safety and health regulation for fur manufacture
涂装作业安全规程 涂层烘干室安全技术规定 Safety code for painting--Safety rules for paint drying oven
涂装作业安全规程 喷漆室安全技术规定 Safety code for painting--Safety rules for spraying booth
兵器工业水污染物排放标准 火炸药 Discharge standard for water pollutants from ordnance industry--Powder and explosive
兵器工业水污染物排放标准 火工品 Discharge standard for water pollutants from ordnance industry--Explosive components
兵器工业水污染物排放标准 弹药装药 Discharge standard for water pollutants from ordnance industry--Ammunition loading
地下水资源管理模型工作要求 Requirements for the work of groundwater resources management model
水中镍-63的分析方法 Analytical method of nickel-63 in water
建筑材料着火性试验方法 Test method for ignitability of building materials
带电作业用小水量冲洗工具(长水柱短水枪型) Washing tools with limited quantity water for live working (Short water gun with long water column)
土壤质量 六六六和滴滴涕的测定 气相色谱法 Soil quality--Determination of BHC and DDT--Gas chromatography
水和土壤质量 有机磷农药的测定 气相色谱法 Water and soil quality--Determination of organophosphorus pesticides--Gas chromatography
恶臭污染物排放标准 Emission standards for odor pollutants
消火栓箱 Fire hydrant box
低、中水平放射性废物固化体性能要求 水泥固化体 Characteristic requirements for solidified waste of low and intermediate level radioactive waste--Cement solidified waste
低、中水平放射性废物固化体性能要求 塑料固化体 Characteristic requirements for solidified waste of low and intermediate level radioactive waste--Plastic solidified waste
水质 湖泊和水库采样技术指导 Water quality--Guidance on sampling techniques from lakes,natural and man-made
环境空气中氡的标准测量方法 Standard methods for radon measurement in environmental air
空气中碘-131的取样与测定 Sampling and determination of 131I in air
净水剂 聚合硫酸铁 Water clarfying agent--Polymeric ferric sulfate
摩托车排气污染物排放标准 Emission standard for exhaust emissions from motorcycle
摩托车排气污染物限值及测试方法 Limits and measurement methods for emissions of pollutants from motorcycles
城市区域环境噪声测量方法 Measuring method of environmental noise of urban area
工业循环冷却水中钙含量的测定 原子吸收光谱法 Industrial circulating cooling water--Determination of calcium--Atomic absorption spectrometric method
工业循环冷却水中锌含量的测定 原子吸收光谱法 Industrial circulating cooling water--Determination of zinc--Atomic absorption spectrometric method
工业循环冷却水水垢中锌的测定 原子吸收光谱法 Scale in industrial circulating cooling water--Determination of zinc--Atomic absorption spectrometric method
工业循环冷却水中铜含量的测定 原子吸收光谱法 Industrial circulating cooling water--Determination of copper--Atomic absorption spectrometric method
工业循环冷却水水垢中铜的测定 原子吸收光谱法 Scale in industrial circulating cooling water--Determination of copper--Atomic absorption spectrometric method
工业循环冷却水中镁含量的测定 原子吸收光谱法 Industrial circulating cooling water--Determination of magnesium--Atomic absorption spectrometric method
工业循环冷却水中钾含量的测定 原子吸收光谱法 Industrial circulating cooling water--Determination of potassium--Atomic absorption spectrometric method
工业循环冷却水中钠含量的测定 原子吸收光谱法 Industrial circulating cooling water--Determination of sodium--Atomic absorption spectrometric method
工业循环冷却水及锅炉水中氟、氯、磷酸根、亚硝酸根、硝酸根和硫酸根的测定 离子色谱法 Industrial circulating cooling water and boiler water--Determination of fluoride, chloride, phosphate, nitrile, nitrate and sulfate--Ion chromatography
工业循环冷却水中粘液形成菌的测定 平皿计数法 Industrial circulating cooling water--Examination of bacteria formed deposits--Standard of plate count
工业循环冷却水中土壤菌群的测定 平皿计数法 Industrial circulating cooling water--Examination of soil micro-bioti--Standard of plate count
工业循环冷却水中粘泥真菌的测定 平皿计数法 Industrial circulating cooling water--Examination of slime formed fungi--Standard of plate count
工业循环冷却水中土壤真菌的测定 平皿计数法 Industrial circulating cooling water--Examination of soil fangi--Srandard of plate count
工业循环冷却水中硫酸盐还原菌的测定 MPN法 Industrial circulating cooling water--Sulfate-reducing bacteria--MPN test
工业循环冷却水中铁细菌的测定 MPN法 Industrial circulating cooling water--Examination of iron bacteria--MPN test
空气质量 氨的测定 纳氏试剂比色法 Air quality--Determination of ammonia--Nessler's reagent colorimetric method
空气质量 氨的测定 离子选择电极法 Air quality--Determination of ammonia--Ion selective electrode method
空气质量 苯乙烯的测定 气相色谱法 Air quality--Determination of styrene--Gas chromatography
水质 钡的测定 电位滴定法 Water quality--Determination of barium--Potentiometric titration method
水质 吡啶的测定 气相色谱法 Water quality--Determination of pyridine--Gas chromatography
水质 钒的测定 石墨炉原子吸收分光光度法 Water quality--Determination of vanadium--Graphite furnace atomic absorption spectrometric method
空气质量 恶臭的测定 三点比较式臭袋法 Air quality--Determination of odor--Triangle odor bag method
空气质量 三甲胺的测定 气相色谱法 Air quality--Determination of trimethylamine--Gas chromatography
空气质量 甲苯、二甲苯、苯乙烯的测定 气相色谱法 Air quality--Determination of toluene, dimethyl benzene and styrene--Gas chromatography
空气质量 硫化氢、甲硫醇、甲硫醚和二甲二硫的测定 气相色谱法 Air quality--Determination of sulfuretted hydrogen, methyl sulfhydryl, dimethyl sulfide and dimethyl disulfide--Gas chromatography
空气质量 氨的测定 次氯酸钠-水杨酸分光光度法 Air quality--Determination of ammonia--Sodium salicylate-sodium hypochlorite spectrophotometric method
空气质量 二硫化碳的测定 二乙胺分光光度法 Air quality--Determination of carben disulfide--Diethylamine spectrophometric method
汽油车怠速污染物排放标准 Emission standard for pollutants at idle speed from vehicle with petrol engine
柴油车自由加速烟度排放标准 Emission standard for smoke at free acceleration from vehicle with diesel engine
车用汽油机排气污染物试验方法 Test method for exhaust pollutants from gasoline engine of vehicle
涂装作业安全规程 静电喷枪及其辅助装置安全技术条件 Safety code for painting--Safety specification for electrostatic spray guns and associated apparatus
工作座椅一般人类工效学要求 General ergonomics requirements for the work seat
操纵器一般人类工效学要求 General ergonomics requirements for controller
人类工效学 工作岗位尺寸 设计原则及其数值 Ergonomics--Principles for determing dimensions of work places in manufacturing areas and the dimensions
几何定向及运动方向 Geometrical orientation and directions of movements
坐姿人体模板功能设计要求 The design requirement for human body templet in sitting
锅炉水处理设备术语 Boiler water treatment equipments--Terminologies
手持式电动工具的安全防护结构设计导则 Directives for safety protecting construction design of hend-held electric tool
地下水质量标准 Quality standard for ground water
眼面护具通用技术条件 Universal technical requirements for eye and face protectors
信号枪通用技术条件 General specification of signal pistol
起重机械危险部位与标志 Lifting appliances--Dangerous positions and signs
磷酸铵盐干粉灭火剂 Fire extinguishing agent--Ammonium phosphate dry chemical
玻璃工厂工业卫生与安全技术规程 The specification for industrial health and safety technology in glass factory
消防软管卷盘 Fire hose reel
危险货物运输包装类别划分原则 The principle of classification of transport packaging groups of dangerous goods
城市区域环境噪声适用区划分技术规范 suitable areas for environmental noise of urban area
视频入侵报警器 Video motion detector
微剂量X射线安全检查设备 Micro-dose X-ray security inspection system
磁开关入侵探测器 Magnetic switch intrusion detectors
通过式金属探测门通用技术条件 General specification for walk--through metal detecting doorway
报警系统环境试验 Environmental testing for alarm systems
地下水资源分类分级标准 Standards of classification for groundwater resources
水中铁-59的分析方法 Analytical method of iron -59 in water
水中钴-60的分析方法 Analytical method of cobalt-60 in water
表面污染测定 第2部分: 氚表面污染 Evaluation of surface contamination--Part 2: Tritium surface contamination
职业安全卫生术语 Terms of occupational safety and health
人类工效学 与心理负荷相关的术语 Ergonomic related to mental work-load general terms
与心理负荷相关的工效学原则 第2部分: 设计原则 Ergonomic principles related to mental workload--Part 2: Design principles
化学品安全标签编写规定 General rules for preparation of precautionary label for industrial chemicals
矿山安全术语 Terms relating to mine safety
环境空气 二氧化硫的测定 甲醛吸收- 副玫瑰苯胺分光光度法 Ambient air--Determination of sulfur dioxide--Formaldehyde absorbing-pararosaniline spectrophotometry
环境空气 总烃的测定 气相色谱法 Ambient air--Determination of total hydrocarbons--Gas chromatographic method
环境空气 铅的测定 火焰原子吸收分光光度法 Ambient air--Determination of lead--Flame atomic absorption spectrophotometric method
环境空气 降尘的测定 重量法 Ambient air--Determination of dustfall--Gravimetric method
泡沫灭火剂通用技术条件 General specification for foam extinguishing agents
可燃气体探测器技术要求和试验方法 Technical requirements and test methods for combustible gas detectors
手提式机械泡沫灭火器 Portable foam fire extinguishers
遮挡式微波入侵探测器技术要求和试验方法 Performance criteria and test methods for microwave interruption intrusion detector
报警系统电源装置、测试方法和性能规范 Alarm system power units, test methods and performance criteria
工业循环冷却水中碱度的测定 Industrial circulating cooling water--Determination of alkalinity
工业循环冷却水中钙、镁离子的测定 EDTA滴定法 Industrial circulating cooling water--Determination of calcium and magnesium-- EDTA titration method
工业循环冷却水中氯离子的测定 硝酸银滴定法 Industrial circulating cooling water--Determination of chloride--Silver nitrate titration method
工业循环冷却水中溶解氧的测定 碘量法 Industrial circulating cooling water--Determination of dissolved oxygen--Iodimetry
工业循环冷却水中需氧量(COD)的测定 高锰酸钾法 Industrial circulating cooling water--Determination of the chemical oxygen demand --Potassium permanganate method
人体机械振动与冲击术语 Terminology for human exposure to mechanical vibration and shock
焊接防护服 Protective clothing for welders
机械安全 基本概念与设计通则 第1部分:基本术语、方法学 Safety of machinery--Basic concept, general principles for design--Part 1: Basic terminology, methodology
机械安全 基本概念与设计通则 第2部分:技术原则与规范 Safety of machinery--Basic concepts, general principles for design--Part 2: Technical principles and specifications
小型民用爆破器材仓库安全标准 Safety standard on site magazines of commercial blasting materials
人体模板设计和使用要求 Design and requirements for the templates of human body ,
铀矿地质辐射防护和环境保护规定 Regulations for radiation and environment protection in uranium geology
放射性污染表面的去污 纺织品去污剂的试验方法 Decontamination of radioactively contaminated surfaces--Testing method of decontamination agents for textiles
工业循环冷却水中浊度的测定 散射光法 Industrial circulating cooling water--Determination of turbidity--Diffused radiation method
工业循环冷却水中pH值的测定 电位法 Industrial circulating cooling water--Determination of pH--Electrometric method
工业循环冷却水中硫酸盐的测定 重量法 Industrial circulating cooling water--Determination of sulfate--Gravimetric method
工业循环冷却水中溶解性固体的测定 重量法 Industrial circulating cooling water--Detemination of dissolved matter--Gravimetric method
粉尘云最小点火能测试方法 双层振动筛落法(积分计算能量) Determination of the minimum ignition energy of dust cloud--Amethod of dust-falling for double-deck shaking sieve (integrated calculation of energy)
防火阀试验方法 Fire dampers--Tests
排烟防火阀试验方法 Test methods for smoke fire dampers
大气环境腐蚀性分类 Corrosivity classification of atmospheric environment
水质 可吸附有机卤素(AOX ) 的测定 微库仑法 Water quality--Determination of adsorbable organic halogens (AOX)--Microcoulometric method
车间空气中铅的石墨炉原子吸收光谱测定方法 Workplace air--Determination of lead--Graphite furnace atomic absorption spectrophotometric method
车间空气中铅的双硫腙分光光度测定方法 Workplace air--Determination of lead--Dithizone spectrophotometric method
车间空气中铅的火焰原子吸收光谱测定方法 Workplace air--Determination of lead--Flame atomic absorption spectrophotometric method
车间空气中硫化铅的火焰原子吸收光谱测定方法 Workplace air--Determination of lead sulfide--Flame atomic absorption spectrophotometric method
车间空气中汞的冷原子吸收光谱测定方法 Workplace air--Determination of mercury--Flameless atomic absorption spectrophotometric method
车间空气中汞的双硫腙分光光度测定方法 Workplace air--Determination of mercury--Dithizone spectrophotometric method
车间空气中氧化锌的双硫腙分光光度测定方法 Workplace air--Determination of zinc oxide--Dithizone spectrophotometric methed
车间空气中氧化锌的火焰原子吸收光谱测定方法 Workplace air--Determination of zinc oxide--Flame atomic absorption spectrophotometric method
车间空气中氧化隔的火焰原子吸收光谱测定方法 Workplace air--Determination of cadmium oxide--Flame atomic absorption spectrophotometric method
车间空气中锰及其化合物的磷酸- 高碘酸钾分光光度测定方法 Workplace air--Determination of manganese and its compounds--Phosphoric acid-potassium periodate spectrophotometric method
车间空气中锰及其化合物的火焰原子吸收光谱测定方法 Workplace air--Determination of manganese and its compounds Flame atomic absorption spectrophotometric method
车间空气中三氧化铬、铬酸盐、重铬酸盐的二苯碳酰二肼分光光度测定方法 Workplace air--Determination of chromium trioxide, chromates and dichromates--Diphenylcarbazide spectrophotometric method
车间空气中三氧化铬的火焰原子吸收光谱测定方法 Workplace air--Determination of chromium trioxide--Flame atomic absorption spectrophotometric method
车间空气中镍及其化合物的火焰原子吸收光谱测定方法 Workplace air--Determination of nickel and its compounds--Flame atomic absorption spectrophotometric method
车间空气中钴及其化合物的火焰原子吸收光谱测定方法 Workplace air--Determination of cobalt and its compounds--Flame atomic absorption spectrophotometric method
车间空气中铍的桑色素荧光光度测定方法 Workplace air--Determination of beryllium Morin fluorescent spectrophotometric method
车间空气中臭氧的丁子香酚--盐酸副玖瑰苯胺分光光度测定方法 Workplace air--Determination of ozone--Eugenol-pararosaniline hydrochloride spectrophotometric method
车间空气中二氧化硫的盐酸副玖瑰苯胺分光光度测定方法 Workplace air--Determination of sulfur dioxide--Pararosaniline hydrochloride spectrophotometric method
车间空气中硫酸及三氧化硫的氯化钡比浊测定方法 Workplace air--Determination of sulfuric acid and sulfur trioxide--Barium chloride turbidimetric method
车间空气中硫化氢的硝酸银比色测定方法 Workplace air--Determination of hydrogen sulfide--Colorimetric method
车间空气中二硫化碳的二乙胺分光光度测定方法 Workplace air--Determination of carbon disulfide--Diethylamine spectrophotometric method
车间空气中氯的甲基橙分光光度测定方法 Workplace air--Determination of chlorine--Methyl orange spectrophotometric method
车间空气中氟化氢及氟化物的离子选择电极测定方法 Workplace air--Determination of hydrogen fluoride and fluorides--Ion selective electrode method
车间空气中氨的纳氏试剂分光光度测定方法 Workplace air--Determination of ammonia--Nessler's reagent spectrophotometric method
车间空气中氧化氮的盐酸萘乙二胺分光光度测定方法 Workplace air--Determination of nitrogen oxides--Naphthyl ethylenediamine dihydrochloride spectrophotometric method
车间空气中氰化氢及氢氰酸盐的异菸酸钠- 巴比妥酸钠分光光度测定方法 Workplace air--Determination of hydrogen cyanide and cyanides--Sodium isonicotinate-sodium barbiturate spectrophotometric method
车间空气中三氧化二砷及五氧化二砷的二乙氨基二硫代甲酸银分光光度测定方法 Workplace air--Determination of arsenic trioxide and pentoxide--Silver diethyl dithiocarbamate spectrophotometric method
车间空气中砷化氢的二乙氨基二硫代甲酸银分光光度测定方法 Workplace air--Determination of ineenic--Silver diethyl dithiocarbamate spectrophotometric method
车间空气中五氧化二磷的钼酸铵分光光度测定方法 Workplace air--Determination of phosphorus pentoxide--Ammonium molybdate spectrophotometric method
车间空气中磷化氢的钼酸铵分光光度测定方法 Workplace air--Determination of phosphine--Ammonium molybdate spectrophotometric method
车间空气中溶剂汽油的直接进样气相色谱测定方法 Workplace air--Determination of solvent naphthas--Direct injection gas chromatographic method
车间空气中溶剂汽油的热解吸气相色谱测定方法 Workplace air--Determination of solvent naphthas--Thermal desorption gas chromatographic method
车间空气中丁二烯的直接进样气相色谱测定方法 Workplace air--Determination of butadiene--Direct injection gas chromatographic method
车间空气中环己烷的直接进样气相色谱测定方法 Workplace air--Determination of cyclohexane--Direct injection gas chromatographic method
车间空气中环己烷的溶剂解吸气相色谱测定方法 Workplace air--Determination of cyclohexane--Solvent desorption gas chromatographic method
车间空气中苯的直接进样气相色谱测定方法 Workplace air--Determination of benzene--Direct injection gas chromatographic method
车间空气中苯的溶剂解吸气相色谱测定方法 Workplace air--Determination of benzene--Solvent desorption gas chromatographic method
车间空气中苯的热解吸气相色谱测定方法 Workplace air--Determination of benzene--Thermal desorption gas chromatographic method
车间空气中甲苯的直接进样气相色谱测定方法 Workplace air--Determination of toluene--Direct injection gas chromatographic method
车间空气中甲苯的溶剂解吸气相色谱测定方法 Workplace air--Determination of toluene--Solvent desorption gas chromatographic method
车间空气中甲苯的热解吸气相色谱测定方法 Workplace air--Determination of toluene--Thermal desorption gas chromatographic method
车间空气中二甲苯的直接进样气相色谱测定方法 Workplace air--Determination of xylene--Direct injection gas chromatographic method
车间空气中二甲苯的溶剂解吸气相色谱测定方法 Workplace air--Determination of xylene--Solvent desorption gas chromatographic method
车间空气中二甲苯的热解吸气相色谱测定方法 Workplace air--Determination of xylene--Thermal desorption gas chromatographic method
车间空气中苯乙烯的直接进样气相色谱测定方法 Workplace air--Determination of styrene--Direct injection gas chromatographic method
车间空气中苯乙烯的溶剂解吸气相色谱测定方法 Workplace air--Determination of styrene--Solvent desorption gas chromatographic method
车间空气中苯乙烯的热解吸气相色谱测定方法 Workplace air--Determination of styrene--Thermal desorption gas chromatographic method
车间空气中联苯-苯醚的紫外分光光度测定方法 Workplace air--Determination of diphenyl-diphenyl ether--Ultraviolet spectrophotometric method
车间空气中萘的溶剂解吸气相色谱测定方法 Workplace air--Determination of naphthalene--Solvent desorption gas chromatographic method
车间空气中甲醛的酚试剂(MBTH)分光光度测定方法 Workplace air--Determination of formaldehyde--3-Methyl-2-benzothiazolinone hydrazone hydrochloride(MBTH) spectrophotometric method
车间空气中丙酮的直接进样气相色谱测定方法 Workplace air--Determination of acetone--Direct injection gas chromatographic method
车间空气中丙酮的溶剂解吸气相色谱测定方法 Workplace air--Determination of acetone--Solvent desorption gas chromatographic method
车间空气中丁酮的直接进样气相色谱测定方法 Workplace air--Determination of butanone--Direct injection gas chromatographic method
车间空气中丁酮的溶剂解吸气相色谱测定方法 Workplace air--Determination of butanone--Solvent desorption gas chromatographic method
车间空气中甲醇的直接进样气相色谱测定方法 Workplace air--Determination of methyl alcohol--Direct injection gas chromatographic method
车间空气中甲醇的热解吸气相色谱测定方法 Workplace air--Determination of methyl alcohol--Thermal desorption gas chromatographic method
车间空气中丙醇的直接进样气相色谱测定方法 Workplace air--Determination of propyl alcohol--Direct injection gas chromatographic method
车间空气中丁醇的直接进样气相色谱测定方法 Workplace air--Determination of butyl alcohol--Direct injection gas chromatographic method
车间空气中乙酸甲酯的直接进样气相色谱测定方法 Workplace air--Determination of methyl acetate--Direct injection gas chromatographic method
车间空气中乙酸乙酯的直接进样气相色谱测定方法 Workplace air--Determination of ethyl acetate--Direct injection gas chromatographic method
车间空气中乙酸丙酯的直接进样气相色谱测定方法 Workplace air--Determination of propyl acetate--Direct injection gas chromatographic method
车间空气中乙酸丁酯的直接进样气相色谱测定方法 Workplace air--Determination of butyl acetate--Direct injection gas chromatographic method
车间空气中乙酸戊酯的直接进样气相色谱测定方法 Workplace air--Determination of amyl acetate--Direct injection gas chromatographic method
车间空气中乙醚的直接进样气相色谱测定方法 Workplace air--Determination of ethyl ether--Direct injection gas chromatographic method
车间空气中酚的4-氨基安替比林分光光度测定方法 Workplace air--Determination of phenol--4-amino-Antipyrine spectrophotometric method
车间空气中酚的溶剂解吸气相色谱测定方法 Workplace air--Determination of phenol--Solvent desorption gas chromatographic method
车间空气中环氧乙烷的直接进样气相色谱测定方法 Workplace air--Determination of ethylene oxide--Direct injection gas chromatographic method
车间空气中环氧乙烷的热解吸气相色谱测定方法 Workplace air--Determination of ethylene oxide--Thermal desorption gas chromatographic method
车间空气中环氧氯丙烷的直接进样气相色谱测定方法 Workplace air--Determination of epichlorohydrin--Direct injection gas chromatographic method
车间空气中光气的紫外分光光度测定方法 Workplace air--Determination of phosgene--Ultraviolet spectrophotometric method
车间空气中氯甲烷的直接进样气相色谱测定方法 Workplace air--Determination of methyl chloride--Direct injection gas chromatographic method
车间空气中二氯甲烷的直接进样气相色谱测定方法 Workplace air--Determination of methylene chloride--Direct injection gas chromatographic method
车间空气中三氯甲烷的直接进样气相色谱测定方法 Workplace air--Determination of trichloromethane--Direct injection gas chromatographic method
车间空气中三氯甲烷的溶剂解吸气相色谱测定方法 Workplace air--Determination of trichloromethane--Solvent desorption gas chromatographic method
车间空气中四氯化碳的直接进样气相色谱测定方法 Workplace air--Determination of carbon tetrachloride--Direct injection gas chromatographic method
车间空气中四氯化碳的溶剂解吸气相色谱测定方法 Workplace air--Determination of carbon tetrachloride-Solvent desorption gas chromatographic method
车间空气中溴甲烷的直接进样气相色谱测定方法 Workplace air--Determination of methyl bromide--Direct injection gas chromatographic method
车间空气中二氯乙烷的直接进样气相色谱测定方法(Apiezon L) Workplace air--Determination of dichloroethane--Direct injection gas chromatographic method(Apiezon L)
车间空气中二氯乙烷的直接进样气相色谱测定方法 (PEG 20M) Workplace air--Determination of dichloroethane--Direct injection gas chromatographic method(PEG 20M)
车间空气中氯乙烯的直接进样气相色谱测定方法 (DNP) Workplace air--Determination of vinyl chloride--Direct injection gas chromatographic method(DNP)
车间空气中氯乙烯的直接进样气相色谱测定方法 (PEG 6000) Workplace air--Determination of vinyl chloride--Direct injection gas chromatographic method (PEG 6000)
车间空气中氯乙烯的热解吸气相色谱测定方法 (DNP) Workplace air--Determination of vinyl chloride--Thermal desorption gas chromatographic method (DNP)
车间空气中氯丙烯的直接进样气相色谱测定方法 Workplace air--Determination of allyl chloride--Direct injection gas chromatographic method
车间空气中氯丁二烯的直接进样气相色谱测定方法 Workplace air--Determination of chloroprene--Direct injection gas chromatographic method
车间空气中滴滴涕的气相色谱测定方法 Workplace air--Determination of DDT--Gas chromatographic method
车间空气中六六六的气相色谱测定方法 Workplace air--Determination of hexachlorobenzene--Gas chromatographic method
车间空气中四氟乙烯的直接进样气相色谱测定方法 Workplace air--Determination of tetrafluoroethylene--Direct injection gas chromatographic method
车间空气中乙腈的直接进样气相色谱测定方法 Workplace air--Determination of acetonitrile--Direct injection gas chromatographic method
车间空气中乙腈的溶剂解吸气相色谱测定方法 Workplace air--Determination of acetonitrile--Solvent desorption gas chromatographic method
车间空气中丙烯腈的溶剂解吸气相色谱测定方法 Workplace air--Determination of acrylonitrile--Solvent desorption gas chromatographic method
车间空气中丙烯腈的直接进样气相色谱测定方法 Workplace air--Determination of acrylonitrile --Direct injection gas chromatographic method
车间空气中丙烯腈的热解吸气相色谱测定方法 Workplace air--Determination of acrylonitrile--Thermal desorption gas chromatographic method
车间空气中苯胺的盐酸萘乙二胺分光光度测定方法 Workplace air--Determination of aniline-Naphthyl ethylenediamine dihydrochloride spectrophotometric method
车间空气中氯化苦的盐酸萘乙二胺分光光度测定方法 Workplace air--Determination of chloropicrin-Naphthyl ethylenediamine dihydrochloride spectrophotometric method
车间空气中硝基苯的盐酸萘乙二胺分光光度测定方法 Workplace air--Determination of nitrobenzene--Naphthyl ethylenediamine dihydrochloride spectrophotometric method
车间空气中钼及其化合物的硫氰酸盐分光光度测定方法 Workplace air--Determination of molybdenum and its compounds--Thiocyanate spectrophotometric method
车间空气中钨或碳化钨的硫氰酸钾- 三氯化钛分光光度测定方法 Workplace air--Determination of tungsten or tungsten carbide--Potassium thiocyanate-titanous trichloride spectrophotometric method
车间空气中五氧化二钒的N-肉桂酰-邻-甲苯羟胺分光光度测定方法 Workplace air--Determination of vanadium pentoxide--N-cinnamoyl-o-tolyl-hydroxylamine spectrophotometric method
车间空气中氢氧化钠的酸碱滴定测定方法 Workplace air--Determination of sodium hydroxide--Acidimetric method
车间空气中氢氧化钠的火焰光度测定方法 Workplace air--Determination of sodium hydroxide--Flame photometric method
车间空气中锆及其化合物的二甲酚橙分光光度测定方法 Workplace air--Determination of zirconium and its compounds--Xylenol orange spectrophotometric method
车间空气中氯化氢及盐酸的硫氰酸汞分光光度测定方法 Workplace air--Determination of hydrogen chloride and hydrochloric acid--Mercuric rhodanate spectrophotometric method
车间空气中黄磷的气相色谱测定方法 Workplace air--Determination of phosphorus--Gas chromatographic method
车间空气中二甲基甲酰胺的气相色谱测定方法 Workplace air--Determination of dimethyl formamide--Gas chromatographic method
车间空气中二硝基苯的气相色谱测定方法 Workplace air--Determination of dinitrobenzene--Gas chromatographic method
车间空气中三硝基甲苯的气相色谱测定方法 Workplace air--Determination of 2,4,6-trinitrotoluene--Gas chromatographic method
车间空气中一硝基氯苯的盐酸萘乙二胺分光光度测定方法 Workplace air--Determination of chloronitrobenzene--N-(1-naphthyl)- ethylenediamine dihydrochloride spectrophotometric method
车间空气中二硝基氯苯的盐酸萘乙二胺分光光度测定方法 Workplace air--Determination of chlorodinitrobenzene--N-(1-naphthyl)- ethylenediamine dihydrochloride spectrophotometric method
车间空气中吡啶的巴比妥酸分光光度测定方法 Workplace air--Determination of pyridine--Barbituric acid spectrophotometric method
车间空气中甲基对硫磷的气相色谱测定方法 Workplace air--Determination of methyl parathion--Gas chromatographic method
车间空气中乐果的盐酸萘乙二胺分光光度测定方法 Workplace air--Determination of Rogor--N-(1-naphthyl)-ethylenediamine- hydrochloride spectrophotometric method
车间空气中乐果的气相色谱测定方法 Workplace air--Determination of Rogor--Gas chromatographic method
车间空气中敌敌畏的溶剂解吸气相色谱测定方法 Workplace air--Determination of dichlorvos--Solvent desorption gas chromatographic method
车间空气中对硫磷的溶剂解吸气相色谱测定方法 Workplace air--Determination of parathion--Solvent desorption gas chromatographic method
车间空气中甲拌磷的溶剂解吸气相色谱测定方法 Workplace air--Determination of phorate--Solvent desorption gas chromatographic method
车间空气中碘甲烷的1,2-萘醌-4-磺酸钠分光光度测定方法 Workplace air--Determination of methyl iodide--1,2-naphthaquinone-4-sodium sulfonate spectrophotometric method
居室空气中甲醛的卫生标准 Hygienic standard for formaldehyde in indoor air of house
居住区大气中二氧化硫卫生检验标准方法 甲醛溶液吸收- 盐酸副玫瑰苯胺分光光度法 Standard method for hygienic examination of sulfur dioxide in air of residential areas--Formaldehyde solution sampling-pararosaniline hydrocloride spectrophotometric method
居住区大气中甲醛卫生检验标准方法 分光光度法 Standard method for hygienic examination of formaldehyde in air of residential areas--Spectrophotometric method
居住区大气中苯胺卫生检验标准方法 气相色谱法 Standard method for hygienic examination of aniline in air of residential areas--Gas chromatography
居住区大气中正已烷卫生检验标准方法 气相色谱法 Standard method for hygienic examination of n-hexane in air of residential areas--Gas chromatography
居住区大气中三氯甲烷、四氯化碳卫生检验标准方法 气相色谱法 Standard method for determination of chloroform,trachloromethane in air of residential areas--Gas chromatography
饭馆(餐厅)卫生标准 Hygienic standard for dining room
生物 尿中1--羟基芘的测定 高效液相色谱(HPCC)法 Biomaterials--Determination of urinary 1--Hydroxypyrene--High performance liquid chromatography
固定污染源排气中颗粒物测定和气态污染物采样方法 Determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationart source
汽车定置噪声限值 Limits of noise emitted by stationary road vehicles
炼焦炉大气污染物排放标准 Emission standard of air pollutants for coke oven
安全标志使用导则 Guidelines for the use of safety signs
车间空气中乙苯卫生标准 Health standard for ethyl benzene in the air of workplace
车间空气中铊卫生标准 Health standard for thallium in the air of workplace
车间空气中硫酰氟卫生标准 Health standard for sulfuryl fluoride in the air of workplace
车间空气中萘卫生标准 Health standard for naphthalene in the air of workplace
车间空气中溴氰菊酯卫生标准 Health standard for deltamethrin in the air of workplace
车间空气中叠氮酸和叠氮化钠卫生标准 Health standard for hydrazoic acid and sodium azide in the air of workplace
车间空气中氧化乐果卫生标准 Health standard for omethoate in the air of workplace
车间空气中异稻瘟净卫生标准 Health standard for kitazin-p in the air of workplace
车间空气中乙二醇卫生标准 Health standard for ethylene glycol in the air of workplace
车间空气中三氟甲基次氟酸酯卫生标准 Health standard for trifluoromethyl hypofluorite in the air of workplace
车间空气中氯甲烷卫生标准 Health standard for methyl chloride in the air of workplace
车间空气中二异氰酸甲苯酯(TDI) 卫生标准 Health standard for toluene diisocyanate in the air of workplace
车间空气中电焊烟尘卫生标准 Health standard for welding fume in the air of workplace
车间空气中氧化镁(烟)卫生标准 Health standard for magnesium oxide (fume) in the air of workplace
车间空气中凝聚二氧化硅粉尘卫生标准 Health standard for condensed silica dust in the air of workplace
车间空气中木粉尘卫生标准 Health standard for wood dust in the air of workplace
车间空气中棉尘卫生标准 Health standard for cotton dust in the air of workplace
车间空气中二月桂酸二丁基锡卫生标准 Health standard for dibutyltin dilaurate in the air of workplace
车间空气中氰戊菊酯卫生标准 Health standard for fenvalerate in the air of workplace
车间空气中二氧化碳卫生标准 Health standard for carbon dioxide in the air of workplace
车间空气中氯丁二烯卫生标准 Health standard for chloroprene in the air of workplace
作业场所工频电场卫生标准 Health standard for electric field in the work environment
车间空气中四氯乙烯卫生标准 Health standard for tetrachloroethylene in the air of workplace
车间空气中杀螟松卫生标准 Health standard for sumithion in the air of workplace
车间空气中硅藻土粉尘卫生标准 Health standard for diatomite dust in the air of workplace
车间空气中大理石粉尘卫生标准 Health standard for marble dust in the air of workplace
车间空气中聚乙烯卫生标准 Health standard for polyethylene in the air of workplace
车间空气中聚丙烯卫生标准 Health standard for polypropylene in the air of workplace
车间空气中镍及其无机化合物卫生标准 Health standard for nickel and its inorganic compounds in the air of workplace
车间空气中久效磷卫生标准 Health standard for monocrotophos in the air of workplace
车间空气中硝化甘油卫生标准 Health standard for nitroglycerine in the air of workplace
车间空气中丙烯酸卫生标准 Health standard for acrylic acid in the air of workplace
车间空气中乙胺卫生标准 Health standard for ethylamine in the air of workplace
车间空气中邻苯二甲酸酐卫生标准 Health standard for phthalic anhydride in the air of workplace
车间空气中二氧化锡卫生标准 Health standard for tin dioxide in the air of workplace
车间空气中硒卫生标准 Health standard for selenium in the air of workplace
车间空气中二氯甲烷卫生标准 Health standard for dichloromethane in the air of workplace
车间空气中三氯甲烷卫生标准 Health standard for trichlormethane in the air of workplace
车间空气中白僵菌孢子卫生标准 Health standard for beauveria bassiana in the air of workplace
车间空气中肼卫生标准 Health standard for hydrazine in the air of workplace
车间空气中一甲基肼卫生标准 Health standard for monomethyl-hydrazine in the air of workplace
车间空气中偏二甲基肼卫生标准 Health standard for unsymmetric dimethylhydrazine in the air of workplace
车间空气中白云石粉尘卫生标准 Health standard for dolomite dust in the air of workplace
车间空气中呼吸性矽尘卫生标准 Health standard for respirable silica dust in the air of workplace
车间空气中石灰石粉尘卫生标准 Health standard for limestone dust in the air of workplace
车间空气中汞卫生标准 Health standard for element mercury vapour in the air of workplace
车间空气中氟化物卫生标准 Health standard for fluorides in the air of workplace
车间空气中钨卫生标准 Health standard for tungsten in the air of workplace
车间空气中异丙醇卫生标准 Health standard for isopropyl alcohol (IPA) in the air of workplace
车间空气中四氢呋喃卫生标准 Health standard for tetrahydrofuran in the air of workplace
车间空气中石膏粉尘卫生标准 Health standard for gypsum dust in the air of workplace
车间空气中乙酸卫生标准 Health standard for acetic acid in the air of workplace
车间空气中异佛尔酮二异氰酸酯卫生标准 Health standard for isophorone diisocyanate (IPDI) in the air of workplace
车间空气中呋喃卫生标准 Health standard for furan in the air of workplace
车间空气中三次甲基三硝基胺(黑索今)卫生标准 Health standard for cyclonite(RDX) in the air of workplace
车间空气中谷物粉尘卫生标准 Health standard for grain dust in the air of workplace
车间空气中呼吸性水泥粉尘卫生标准 Health standard for respirable cement dust in the air of workplace
车间空气中桑蚕丝尘卫生标准 Health standard for mulberry silk dust in the air of workplace
车间空气中稀土粉尘卫生标准 Health standard for rare-earth dust in the air of workplace
车间空气中石棉纤维卫生标准 Health standard for asbestos fibre in the air of workplaces
车间空气中对硝基苯胺卫生标准 Health standard for p-nitroaniline in the air of workplace
车间空气中邻苯二甲酸二丁酯卫生标准 Health standard for dibutyl phthalate in the air of workplace
车间空气中麻尘(亚麻、黄麻和苎麻)卫生标准 Health standard for flax,jute and ramie dusts in the air of workplace
车间空气中草酸卫生标准 Health standard for oxalic acid in the air of workplace
车间空气中硫酸二甲酯卫生标准 Health standard for dimethyl sulfate in the air of workplace
车间空气中氯化锌(烟)卫生标准 Health standard for zinc chloride (fume) in the air of workplace
作业场所空气中呼吸性煤尘卫生标准 Health standard for respirable coal dust in the air of workplace
车间空气中甲酚卫生标准 Health standard for cresol in the air of workplace
车间空气中考的松卫生标准 Health standard for cortisone in the air of workplace
工作系统设计的人类工效学原则 Ergonomic principles in the design of work systems
成年人手部号型 Hand sizing system-Adult
线型感温火灾探测器技术要求及试验方法 Technical requirements and test methods for line type heat detectors
有线火警调度台技术要求和试验方法 Technical requirements and test methods for wired fire alarm dispatching console
119火灾报警系统通用技术条件 General technical conditions for 119 fire alarm system
固定式灭火系统基本术语 Fundamental terminology of fixed extinguishing systems
医药工业洁净室(区)悬浮粒子的测试方法 Test method for airborne particles in clean room (area) of the pharmaceutical industry
医药工业洁净室(区)浮游菌的测试方法 Test method for airborne microbe in clean room (area) of the pharmaceutical industry
医药工业洁净室(区)沉降菌的测试方法 Test method for settling microbe in clean room (area) of the pharmaceutical industry
大气污染物综合排放标准 Integrated emission standard of air pollutants
民用机场环境卫生标准 Environmental health standard for civil airport
船舶散装运输液体化学品危害性评价规范 水生生物急性毒性试验方法 Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Acute toxicity testing methods for aquatic organism
船舶散装运输液体化学品危害性评价规范 水生生物积累性试验方法 Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Bioaccumulation testing method for aquatic organism
船舶散装运输液体化学品危害性评价规范 水生生物沾染试验方法 Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Taint testing method for aquatic organism
船舶散装运输液体化学品危害性评价规范 哺乳动物毒性试验方法 Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Toxicity test method for mammal
船舶散装运输液体化学品危害性评价规范 危害性评价程序与污染分类方法 Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Assessment procedure and determination of pollution category
X线诊断中受检者放射卫生防护标准 Radiological protection standard for the examinee in X-ray diagnosis
育龄妇女和孕妇的X线检查放射卫生防护标准 Radiological health protection standards for X-ray examinations of child-bearing age women and pregnant women
儿童X线诊断放射卫生防护标准 Radiological protection standards for the children in X-ray diagnosis
医用γ射线远距治疗设备放射卫生防护标准 Radiological health protection standard on--Gamma-beam teletherapy equipment in medicine
一次性医疗用品γ射线辐射灭菌标准 Standards for γ-rays radiation sterilization of disposable medical appliances
含放射性物质消费品的放射卫生防护标准 Radiological protection standards for consumer products containing radioactive substances
使用密封放射源的放射卫生防护要求 Radiological protection reguirments for using sealed radioactive sources
X射线衍射仪和荧光分析仪放射卫生防护标准 Radiation protection standards for X-ray diffraction and fluorescence analysis equipment
地下建筑氡及其子体控制标准 Standard for controlling radon and its daughters in underground space
工业X射线探伤放射卫生防护标准 Radiological protection standards for industrial X-ray detection
油(气)田非密封型放射源测井放射卫生防护标准 Radiological protection standards for unsealed radioactive sources logging in oil and gas-field
放射性发光涂料的放射卫生防护标准 Radiological protection standard for radioactive luminescent paint
临床核医学放射卫生防护标准 Radiological protection standard for clinical nuclear medicine
临床核医学中患者的放射卫生防护标准 Radiological protection standards for the patient in clinical nuclear medicine
体外射束放射治疗中患者的放射卫生防护标准 Radiological protection standards for the patient in external beam radiological therapy
X射线防护材料屏蔽性能及检验方法 Shielding performance and test methods of protection material against X-rays
后装γ源近距离治疗放射卫生防护标准 Radiological protection standard for gamma-ray afterloading brachytherapy
离子感烟火灾探测器放射卫生防护标准 Radiological protection standards for ionization smoke fire detectors
汽灯纱罩生产的放射卫生防护标准 Radiological health protection standards for producing gas mantles
地热水应用中的放射卫生防护标准 Radiological protection standards for using geothermal water
含密封源仪表的放射卫生防护标准 Radiological protection standards for gauges containing sealed radioactive source
医用电子加速器放射卫生防护标准 Radiological protection standard for using of medical electron accelerator
金属非金属露天矿山安全规程 Safety regulations for metal and nonmetal opencast mines
金属非金属地下矿山安全规程 Safety regulations for metal and nonmetal underground mines
粉尘云爆炸下限浓度测定方法 Determination for minimum explosive concentration of dust cloud
粉尘云最大爆炸压力和最大压力上升速率测定方法 Determination for maximum explosion and maximum rate of pressure rise of dust cloud
粉尘层电阻率测定方法 Determination for electrical resistivity of dust in layer
粉尘云最小着火能量测定方法 Determination of the minimum ignition energy of dust cloud
粉尘云最低着火温度测定方法 Determination of the minimum ignition temperature of dust cloud
粉尘层最低着火温度的测定方法 Determination of the minimum ignition temperature of dust layer
半导体少长针消雷装置使用的安全要求 The safety demands of using semiconductor lightning eliminator
振动与冲击 人体的机械驱动点阻抗 Vibration and shock--Mechanical driving point impedance of the human body
振动与冲击 人体Z轴向的机械传递率 Vibration and shock--Mechanical transmissibility of the human body in the z direction
黄磷包装 Packing for yellow phosphorus
进口废物环境保护控制标准 废骨料(试行) Environmental protection control standard for importod scrap material--Waste animal bone as raw material
进口废物环境保护控制标准 冶炼渣(试行) Environmental protection control standard for importcd scrap material--Slag as raw material
进口废物环境保护控制标准 木、木制品废料 Environmental protection control standard for imported scrap material--Scrap wood and wooden products as raw material
进口废物环境保护控制标准 废纸或纸板(试行) Environmental protection control standard for imported scrap material--Scrap paper and board as raw material
进口废物环境保护控制标准 纺织品废物(试行) Environmental protection control standard for imported scrap material--Scrap cotton and cloth as raw material
进口废物环境保护控制标准 废钢铁(试行) Environmental protection control standard for imported scrap material--Iron and steel scraps
进口废物环境保护控制标准 废有色金属 Environmental protection control standard for imported scrap material--Nonferrous metal scraps
进口废物环境保护控制标准 废电机(试行) Environmental protection control standard for imported scrap material--Scrap motor
进口废物环境保护控制标准 废电线电缆(试行) Environmental protection control standard for imported scrap material--Waste electrical line and cable
进口废物环境保护控制标准 废五金电器(试行) Environmental protection control standard for imported scrap material--Metal and electrical appliance scraps
进口废物环境保护控制标准 供拆卸的船舶及其他浮动结构体(试行) Environmental protection control standard for importedscrap matcrial--Scrapping ships and floating facilities
进口废物环境保护控制标准 废塑料 Environmental protection control standard for lmported scrap material--Plastic scrap as raw material
水质 石油类和动植物油的测定 红外光度法 Water quality--Determination of petroleum oil, animal and vegetable oils--Infrared photometric method
水质 硫化物的测定 亚甲基蓝分光光度法 Water quality--Determination of sulfide--Methylene blue spectrophotometric method
高炉喷吹烟煤系统防爆安全规程 Safety regulations for the explosion precautions of bituminous coal injection into blast furnace
自给式空气呼吸器 Self-contained compressed air breathing apparatus
海船救生安全标志 Safety signs for life-saving on sea-going ship
文物系统博物馆安全防范工程设计规范 Designed criterion of security and alarm enginering for cultural museums series
防盗报警中心控制台 Security alarm centre control stations
潜水员水下用电安全技术规范 Technical regulations for diver's safe use of electricity under water
干粉灭火系统部件通用技术条件 General technical specifications for components of powder extinguishing systems
二氧化碳灭火系统及部件通用技术条件 General technical specification for components of carbon dioxide fire extinguishing systems
柜式气体灭火装置性能要求和试验方法 Performance requirements and test methods for cabinet gas fire extinguishing equipment
银行营业场所安全防范工程设计规范 Security and alarm enginering specification for banking business place
报警图像信号有线传输装置 Transfer equipment of alarm picture signal through cable
工程机械 噪声限值和测定 Earth-moving machinery--Noise limits
工程机械 定置试验条件下机外辐射噪声的测定 Measurement of exterior noise emitted by earth moving machinery--Stationary test conditions
工程机械 定置试验条件下司机位置处噪声的测定 Measurement at the operator's position of noise emitted by earth-moving machinery--Stationary test conditions
工程机械 动态试验条件下机外辐射噪声的测定 Measurement of exterior noise emitted by earth moving machinery--Dynamic test conditions
工程机械 动态试验条件下司机位置处噪声的测定 Measurement at the operator's position of noise emitted by earth-moving machinery--Dynamic test conditions
机械安全 急停 设计原则 Safety of machinery--Emergency stop--Principles for design
机械安全 安全标准的起草与表述规则 Safety of machinery--Rules for the drafting and presentation of safety standards
耐油防护鞋通用技术条件 General technical requirements for resistance oil protective footwar
X射线防护服 X-ray protective clothing
排风罩的分类及技术条件 The classification and technical specification of exhaust hood
安全防范报警设备 安全要求和试验方法 Safety requirements and methods for security alarm equipment
消防联动控制设备通用技术条件 General technical conditions of control for fire protection equipment
防火膨胀密封件 Fire intumescent seals
可燃气体报警控制器技术要求及试验方法 Technical requirements and test methods for combustibic gas alarm control units
钢质防火窗 Steel fire windows
保险柜耐火性能试验方法 Test methods for fire resistance of cotainers
低压锅炉水处理设施运行效果与监测 Running result and the monitoring and testing of low-pressure boilers water-treatment equipment
消防电子产品 环境试验方法及严酷等级 Environmental test methods and severities for fire electronic products
电气火灾原因技术鉴定方法 第1部分:宏观法 Technical determination methods for electrical fire cause Part 1: Macroscopic method
电气火灾原因技术鉴定方法 第2部分:剩磁法 Technical determination method for electrical fire cause Part 2: Residual magnetic method
电气火灾原因技术鉴定方法 第3部分:成分分析法 Technical determination methods for electrical fire cause Part 3: Component analytic method
电气火灾原因技术鉴定方法 第4部分:金相法 Technical determination methods for electrical fire cause Part 4: Metallographic method
能量为300keV?25MeV电子束辐射加工装置剂量学导则 Guide for dosimetry in an electron beam facility for radiation processing at energies between 300keV and 25MeV
除尘器 术语 第一部分:共性术语 Dust collector-Terminology Part 1: Common ones
除尘器 术语 第二部分:惯性式、过滤式、湿式除尘器术语 Dust collector-Terminology Part 2: Inertial dust collector,porous dust collector and wet scrubber
除尘器 术语 第三部分:电除尘器术语 Dust collector-Terminology Part 3: Electrostatic precipitators
机械安全 控制系统有关安全部件 第一部分 设计通则 Safety of machinery--Safety related parts of control systems--Part 1: General principles for design
机械安全 风险评价的原则 Safety of machinery--Principles for risk assessment
水的混凝、絮凝杯罐试验方法 Coagulation--Flocculation jar test of water
生活垃圾填埋污染控制标准 Stnadard for pollution control on the landfill site for domestic waste
石油罐导静电涂料电阻率测定法 Standard test methods for electrical resistivity of antistatic coating in petroleum tanks
密目式安全立网 Fine mesh safety vertical net
小型工业企业建厂劳动卫生基本技术条件 Elementary technological conditions of labour health for constructing small industrial enterprises
水泥生产防尘技术规程 Code of dust control for cement producting
氧气及相关气体安全技术规程 Safety technical regulation for oxygen and relative gases
粉尘物性试验方法 第1部分:试验尘样的采集 Methods of dust character test--Part 1: Dust sampling
粉尘物性试验方法 第2部分:有效密度的测定 比重瓶法 Methods of dust character test--Part 2: Determination of effective density--Pyknometer method
粉尘物性试验方法 第3部分:堆积密度的测定 自然堆积法 Methods of dust character test--Part 3: Determination of bulk density--Natural bulk method
粉尘物性试验方法 第4部分:分散度的测定 安德逊移液管法 Methods of dust character test--Part 4: Determination of dispersivity--Andreason pipette method
粉尘物性试验方法 第5部分:安息角的测定 注入限定底面法 Methods of dust character test--Part 5: Determination of reposeful angle--Poured angle of restrictive pile
粉尘物性试验方法 第6部分:吸湿性的测定 吸湿率法 Methods of dust character test--Part 6: Determination of hygroscopy--Hygroscopicity method
粉尘物性试验方法 第7部分:含湿量的测定 干燥法 Methods of dust character test--Part 7: Determination of moisture content--Dry method
粉尘物性试验方法 第8部分:浸润性的测定 浸透速度法 Methods of dust character test--Part 8: Determination of immersion--Immersion speed method
粉尘物性试验方法 第9部分:粘结性的测定 垂直拉断法 Methods of dust character test--Part 9: Determination of cohesion--Normal pull rift method
粉尘物性试验方法 第10部分: 比电阻的测定 圆盘法 Methods of dust character test--Part 10: Determination of electrical resistivity--Disk method
粉尘物性试验方法 第11部分: 工况粉尘比电阻的测定 过滤式同心圆环法 Methods of dust character test--Part 11: Determination of field resistivity--Concentric rings method by means of filtration
放射性废物近地表处置的废物接收准则 Acceptance criteria for near surface disposal of radioactive waste
电击防护 装置和设备的通用部分 Protection against electric shock--Common aspects for installation and equipment
二次供水设施卫生规范 Hygienic specification for facilities of secondary water supply
车间空气中岩棉粉尘卫生标准 Hygienic standard for rock wool dust in the air of workplace
车间空气中碳酸钠卫生标准 Hygienic standard for sodium carbonate in the air of workplace
车间空气中焦炉逸散物卫生标准 Hygienic standard for coke oven emissions in the air of workplace
车间空气中砷及其无机化合物卫生标准 Hygienic standard for arsenic and its inorganic compounds in the air of workplace
X射线行李包检查系统的放射卫生防护标准 Radiological protection standards for X--ray luggage inspection system
作业场所空气采样仪器的技术规范 Technique specifications of sampling instruments for air in the workplace
车间空气中锡及其无机化合物的火焰原子吸收光谱测定方法 Workplace air--Determination of tin and its inorganic compounds--Flame atomic absorption spectroscopy
车间空气中锑及其化合物的火焰原子吸收光谱测定方法 Workplace air--Determination of antimony and its compounds--Flame atomic absorption spectroscopy
车间空气中甲硫醇的气相色谱测定方法 Workplace air--Determination of methyl mercaptan--Gas chromatography method
车间空气中偏二甲基肼的气相色谱测定方法 Workplace air--Determination of l,l-dimethylhydrazine--Gas chromatographic method
车间空气中二乙胺的气相色谱测定方法 Workplace air--Determination of diethylamine--Gas chromatographic method
车间空气中三氧化二砷原子吸收光谱测定方法 Workplace air--Determination of arsenic trioxide--Atomic absorption spectrometric method
车间空气中甲酸的气相色谱测定方法 Workplace air--Determination of formic acid--Gas chromatographic method
车间空气中丙酸的气相色谱测定方法 Workplace air--Determination of propionic acid--Gas chromatographic method
车间空气中苄基氯的气相色谱测定方法 Workplace air--Determination of benzyl chloride--Gas chromatographic method
车间空气中苄基氰的气相色谱测定方法 Workplace air--Determination of benzyl cyanide--Gas chromatographic method
车间空气中对硝基苯胺的溶剂解吸气相色谱测定方法 Workplace air--Determination of P-nitroaniline--Solvent desorption gas chromatographic method
车间空气中环已酮的溶剂解吸气相色谱测定方法 Workplace air--Determination of cyclohexanone--Solvent desorption gas chromatographic method
车间空气中乙醛的溶剂解吸气相色谱测定方法 Workplace air--Determination of acetaldehyde--Solvent desorption gas chromatographic method
车间空气中丁醇的溶剂解吸气相色谱测定方法 Workplace air--Determination of butyl alcohol--Solvent desorption gas chromatographic method
车间空气中异丁醇的溶剂解吸气相色谱测定方法 Workplace air--Determination of isobutyl alcohol--Solvent desorption gas chromatographic method
车间空气中硫酸二甲酯的溶剂解吸液相色谱测定方法 Workplace air--Determination of dimethyl sulphate--Solvent desorption liquid chromatographic method
车间空气中三硝基苯酚的高效液相色谱测定方法 Workplace air--Determination of trinitrophenol--Liquid chromatographic method
车间空气中乙酸甲酯的溶剂解吸气相色谱测定方法 Workplace air--Determination of methyl acetate--Solvent desorption gas chromatographic method
车间空气中乙酸乙酯的溶剂解吸气相色谱测定方法 Workplace air--Determination of ethyl acetate--Solvent desorption gas chromatographic method
车间空气中乙酸丙酯的溶剂解吸气相色谱测定方法 Workplace air--Determination of propyl acetate--Solvent desorption gas chromatographic method
车间空气中乙酸丁酯的溶剂解吸气相色谱测定方法 Workplace air--Determination of butyl acetate--Solvent desorption gas chromatographic method
车间空气中乙酸戊酯的溶剂解吸气相色谱测定方法 Workplace air--Determination of amyl acetate--Solvent desorption gas chromatographic method
车间空气中2-甲氧基乙醇的溶剂解吸气相色谱测定方法 Workplace air--Determination of 2-methoxyethanol--Solvent desorption gas chromatographic method
车间空气中2-乙氧基乙醇的溶剂解吸气相色谱测定方法 Workplace air-Determination of 2-ethoxyethanol--Solvent desorption gas chromatographic method
车间空气中2-丁氧基乙醇的溶剂解吸气相色谱测定方法 Workplace air--Determination of 2-butoxyethanol--Solvent desorption gas chromatographic method
车间空气中钼的等离子体发射光谱测定方法 Workplace air--Determination of molybdenum--I CP--A ES method
车间空气中N-甲基苯胺的溶剂解吸气相色谱测定方法 Workplace air--Determination of N-methylaniline--Solvent desorption gas chromotrographic method
车间空气中N,N-二甲基苯胺的溶剂解吸气相色谱测定方法 Workplace air--Determination of N,N-dimethylaniline--Solvent desorption gas chromatographic method
车间空气中三氯乙烯的气相色谱测定方法 Workplace air--Determination of trichlorethylene--Gas chromatographic method
车间空气中丁酮的溶剂解吸气相色谱测定方法 Worplace air--Determination of butanone--Solvent desorption gas chromatographic method
车间空气中丙烯酸乙酯的溶剂解吸气相色谱测定方法 Workplace air--Determination of ethyl acrylate--Solvent desorption gas chromatographic method
室内空气中细菌总数卫生标准 Hygienic standard for bacterial total in indoor air
室内空气中二氧化碳卫生标准 Hygienic standard for carbon dioxidemin indoor air
室内空气中可吸入颗粒物卫生标准 Hygienic standard for inhalable particulate matter in indoor air
室内空气中氮氧化物卫生标准 Hygienic standard for nitrogen oxides in indoor air
室内空气中二氧化硫卫生标准 Hygienic standard for sulfur dioxide in indoor air
居住区大气中酚类化合物卫生检验标准方法 4-氨基安替比林分光光度法 Standard method for hygienic examination of phenols in air of residential areas--4-Aminoantipyrine spectrophotometric method
水质 挥发性卤代烃的测定 顶空气相色谱法 Water quality--Determination of volatile halogenated organic compounds--Headspace gas chromatography
水质 1,2-二氯苯、1,4-二氯苯、1,2,4-三氯苯的测定 气相色谱法 Water quality--Determination of 1,2-dichlorobenzene,1,4-dichlorobenzene,1,2,4-trichlorobenzene--Gas chromatography
环境 甲基汞的测定 气相色谱法 Environment--Determination of methylmercury--Gas chromatography
水质 硫化物的测定 直接显色分光光度法 Water quality--Determination of sulfide--Direct development of the spectrophotometry
土壤质量 总砷的测定 二乙基二硫代氨基甲酸银分光光度法 Soil quality--Determination of total arsenic--Silver diethyldithiocarbamate spectrophotometry
土壤质量 总砷的测定 硼氢化钾--硝酸银分光光度法 Soil quality--Determination of total arsenic--Spectrophotometric method with silver salt
土壤质量 总汞的测定 冷原子吸收分光光度法 Soil quality--Determination of total mercury--Cold atomic absorption spectrophotometry
土壤质量 总铬的测定 火焰原子吸收分光光度法 Soil quality--Determination of total chromium--Flame atomic absorption spectrophotometry
土壤质量 铜、锌的测定 火焰原子吸收分光光度法 Soil quality--Determination of copper,zinc--Flame atomic absorption spectrophotometry
土壤质量 镍的测定 火焰原子吸收分光光度法 Soil quality--Determination of nickel--Flame atomic absorption spectrophotometry
土壤质量 铅、镉的测定 KI-MIB萃取火焰原子吸收分光光度法法 Soil quality--Determination of lead,cadmium--KI-MIBK extraction flame atomic absorption spectrophotometry
土壤质量 铅、镉的测定 石墨炉原子吸收分光光度法 Soil quality--Determination of lead,cadmium--Graphite furnace atomic absorption spectrophotometry
放射卫生防护监测规范 第1部分: 工业X射线探伤 Radiological protection monitoring procedure--Part 1: Industrial X-ray detection
人防工程 平时使用环境卫生标准 Hygienic standard for peacetime utilization of civil air defence works
城市公共厕所卫生标准 Hygienic standard for public toilet in municipality
饮用水化学处理剂卫生安全性评价 Hygienic safety evaluation for chemicals used in drinking water treatment
生活饮用水输配水设备及防护材料的安全性评价标准 Standard for safety evaluation of equipment and protective materials in drinking water system
公共场所卫生监测技术规范 Rules of health monitoring for public places
环境镉污染健康危害区判定标准 Oiscriminant standard for health hazard area caused by environmental cadmium pollution
煤制气厂卫生防护距离标准 Health protection zone standard for coal gas plant
小学生一日学习时间卫生标准 Health standard of daily learning time for elementary school children
中学生一日学习时间卫生标准 Health standard of daily learning time for middle school students
中小学校教室采暖温度标准 Standard of heating temperature for classroom of middle and primary school
中小学校教室换气卫生标准 Hygienic standard of classroom ventilation in elementary and middle school
放射性物质安全运输 货包的泄漏检验 Safe transport of radioactive material leakage testing on packages
热环境 根据WBGT指数(湿球黑球温度)对作业人员热负荷的评价 Hot environments--Estimation of the heat stress on working man based on the WBGT-index(wet bulb globe temperature)
成年人人体质心 Mass center of the adult human body
声学 低噪声工作场所设计指南 噪声控制规划 Acoustics--Guidelines for the design of low-noise workplaces--Noise control strategies
声学 市区行驶条件下轿车噪声的测量 Acoustics--Measurement of noise emitted by passenger cars under conditions representative of urban driving
铝镁粉加工粉尘防爆安全规程 Safety regulations for the prevention and protection of dust explosion of the manufacture of aluminum and magnesium powder
石英砂(粉)厂防尘技术规程 Code of dust control for quartz sand(powder) plant
水池贮源型γ辐照装置设计安全准则 Criteria for safe design of wet source storage gamma irradiators
瓶装饮用纯净水 Bottled purified water fur drinking
瓶装饮用纯净水卫生标准 Hygienic standard of bottled purified water for drinking
食品工业用浓缩果蔬汁(浆)卫生标准 Hygienic standard for concentrated fruit and vegetable juice for food industry
铝电解生产防尘防毒技术规程 Code of dust and poison control for aluminium electrowinning
铅冶炼防尘防毒技术规程 Code of dust and poison control for lead smelting
液化气体船水上过驳作业安全准则 Safety standard of ship to ship transfer operations of liquefied gas carriers on waters
水成膜泡沫灭火剂 Aqueous film forming foam extinguishing agent
通风管道的耐火试验方法 Fire resistance test method of ventilation ducts
火灾显示盘通用技术条件 General technical conditions for fire indicating panels
粮食加工、储运系统粉尘防爆安全规程 Safety regulations for the protection of dust explosion for grain processing, storage and transportation system
机械安全 压敏防护装置 第1部分: 压敏垫和压敏地板设计和试验通则 Safety of machinery Pressure sensitive protective device Part 1: General principles for the design and testing of pressure sensing mats and pressure sensing floors
防盗安全门通用技术条件 General specification for burglary resistant safety door
海洋运输船舶应变部署表 Emergency plan for seagoing merchant ship
牛头刨床安全防护技术要求 Shaping machine--Safeguarding specification
插床 安全防护技术要求 Slotting machine--Safeguarding specification
拉床 安全防护技术要求 Broaching machine--Safeguarding specification
防护服用织物 防热性能 抗熔融金属滴冲击性能的测定 Protective clothine--Heatproofbehaviour--Determination of behaviour of materials on impact of small splashes of molten metal
电热毯、电热垫和家用类似柔性发热器具的安全 Safety of electrically heated blankets,pads and simi lar flexible heating appliances for household use
易燃易爆罐区安全监控预警系统验收技术要求 Technical requirements of acceptance for safety monitoring,controlling and early warning system of inflammable and explosive tank farm
矿山杂散电流的测定 The measurement of stray current in mines
车用压燃式发动机排气污染物排放限值及测量方法 Limits and measurement methods for exhaust pollutants from compression ignition(C.I.) engines of vehicles
声学 测听方法 第3部分:语言测听 Acoustics--Audiometric test methods--Part 3: Speech audiometry
长途客车内空气质量要求 Hygienic standard for the air quality inside long distance coach
激光防护镜主要参数测试方法 Testing method of main parameters for laser protective eyewear
涂装作业安全规程 浸涂工艺安全 Safety code for painting--Safety for dipping process
可燃物质动力学常数的热分析试验方法 Thermal analysis test methods for kinetic constants of combustible materials
水系灭火剂通用技术条件 General specification for water extinguishing agent series
机械安全 进入机器和工业设备的固定设施 第1部分: 进入两级平面之间的固定设施的选择 Safety of machinery--Permanent means of access to machines and industrial plants--Part 1:Choice of a fixed means of access between two levels
机械安全 进入机器和工业设备的固定设施 第2部分: 工作平台和通道 Safety of machinery--Permanent means of access to machines and industrial plants--Part 2: Working platforms and gangways
机械安全 进入机器和工业设备的固定设施 第3部分: 楼梯、阶梯和护栏 Safety of machinery--Permanent means of access to machines and industrial plants--Part 3: Stairways,stepladders and guard-rail
机械安全 进入机器和工业设备的固定设施 第4部分: 固定式直梯 Safety of machinery--Permanent means of access to machines and industrial plants--Part 4: Fixed ladders
梯子 第1部分: 术语、型式和功能尺寸 Ladders--part 1: terms,types,functional sizes
梯子 第2部分: 要求、试验和标志 Ladders--Part 2: Requirements,Testing,marking
液压破拆工具通用技术条件 General specification for hydraulically operated rescue tools
易燃易爆性商品储藏养护技术条件 Specifications for storage and preservation of combustible and explosive goods
腐蚀性商品储藏养护技术条件 Specifications for storage and preservation of corrosive goods
毒害性商品储藏养护技术条件 Specifications for storage and preservation of toxicant goods
港口散粮装卸系统粉尘防爆安全规程 Safety regulation for dust explosion protection in raw grain loading and unloading system in port
粉尘爆炸危险场所用收尘器 防爆导则 Directives for dust explosion protection for dust collectors in dust explosion hazardous ares
海洋石油开发工业含油污水分析方法 Analysis method for oil-bearing waste water from marine petroleum development industry
软体家具 弹簧软床垫和沙发抗引燃特性的评定 Upholstered furniture--Assessment of the resistance to ignition of the spring mattress and the sofa
消防应急灯具 Fire emergency luminaries
拟再循环、再利用或作非放射性废物处置的固体物质的放射性活度测量 Activity measurements of solid materials considered for recycling re-use,or disposal as non-radioactive waste
防尘服 Dustproof clothing
气动工具一般安全要求 General safety requirements for pneumatic tools
手持式机械作业防振要求 Requirements for vibration hazards reduction of hand-held machines at the workplace
核事故应急情况下公众受照剂量估算的模式和参数 Models and parameters for calculating radiation doses to the public in the event of a nuclear accident
人类工效学 代谢产热量的测定 Ergonomics--Determination of metabolic heat production
中等热环境 PMV和PPD指数的测定及热舒适条件的规定 Moderate thermal environments--Determination of the PMV and PPD indices and specification of the conditions for thermal comfort
工业废渣中氰化物卫生标准 Hygienic standard for cyanide in industrial waste
居住区大气中苯并(a)芘卫生标准 Hygienic standard for benzo(a)pyrene in the atmospheric air of residential areas
村镇规划卫生标准 Hygienic standards for township-village planning
居住区大气中甲硫醇卫生标准 Hygienic standard for methylmercaptan in air of residential areas
居住区大气中正己烷卫生标准 Hygienic standard for n-hexane in air of residential area
居住区大气中一甲基肼卫生标准 Hygienic standard for monomethyl-hydrazine in air of residential areas
居住区大气中偏二甲基肼卫生标准 Hygienic standard for unsymmetric dimethyl hydrazine in residential area air
居住区大气中肼卫生标准 Hygienic standard for hydrazine in residential area air
水源水中肼卫生标准 Hygienic standard for hydrazine in water sources
水源水中一甲基肼卫生标准 Hygienic standard for monomethyl hydrazine in water sources
水源水中偏二甲基肼卫生标准 Hygienic standard for unsymmetrical dimethyl hydrazine in water sources
水源水中二乙烯三胺卫生标准 Hygienic standard for diethylenetriamine in water sources
水源水中三乙胺卫生标准 Hygienic standard for triethylamine in water sources
居住区大气中臭氧卫生标准 Hygienic standard for ambient in air of residential area
居住区大气中酚卫生标准 Hygienic standard for phenol in air of residential area
水泥厂卫生防护距离标准 Health protection zone standard for cement plant
硫化碱厂卫生防护距离标准 Health protection zone standard for sodium sulphuret plant
油漆厂卫生防护距离标准 Health protection zone standard for paint plant
氯碱厂(电解法制碱)卫生防护距离标准 Health protection zone standard for chlor alkali plant
塑料厂卫生防护距离标准 Health protection zone standard for plastics plant
炭素厂卫生防护距离标准 Health protection zone standard for charcoal electrode plant
内燃机厂卫生防护距离标准 Health protection zone standard for internal combustion engine plant
汽车制造厂卫生防护距离标准 Health protection zone standard for auto-mobile factory
石灰厂卫生防护距离标准 Health protection zone standard for lime plant
石棉制品厂卫生防护距离标准 Health protection zone standard for asbestos factory
肉类联合加工厂卫生防护距离标准 Health protection zone standard for meatworks
制胶厂卫生防护距离标准 Health protection zone standard for making glue plant
缫丝厂卫生防护距离标准 Health protection zone standard for filature
火葬场卫生防护距离标准 Health protection zone standard for crematorium
皮革厂卫生防护距离标准 Health protection zone standard for making leather plant
高压静电防护服装及试验方法 High voltage electrostatic shielding clothes and test procedure
机械安全 可接触表面温度 确定热表面温度限值的工效学数据 Safety of machinery--Temperatures of touchable surfaces--Ergonomics data to establish temperature limit values for hot surfaces
监控式抑爆装置技术要求 Technical specification of automatic dust explosion suppression devices
轻便摩托车排气污染物限值及测试方法 Limits and measurement methods for emissions of pollutants from mopeds
室内空气中臭氧卫生标准 Hygienic standard for ozone in indoor air
室内空气中溶血性链球菌卫生标准 Hygienic standard for hemolytics steptococcus in indoor air
公共, 场所空气微生物检验方法 细菌总数测定 Methods of microbiological examination for air in public places Determination of aerobic bacterial count
公共场所茶具微生物检验方法 细菌总数测定 Methods of microbiological examination for tea set in public places Determination of aerobic bacterial count
公共场所茶具微生物检验方法 大肠菌群测定 Methods of microbiological examination for tea set in public places Determination of coliform bacteria
公共场所毛巾、床上卧具微生物检验方法 细菌总数测定 Methods of microbiological examination for towel and bedclothes in public places Determination of aerobic bacterial count
公共场所毛巾、床上卧具微生物检验方法 大肠菌群测定 Methods of microbiological examination for towel and bedclothes in public places Determination of coliform bacteria
理发用具微生物检验方法 大肠菌群测定 Methods of microbiological examination for barber's tools Determination of coliform bacteria
理发用具微生物检验方法 金黄色葡萄球菌测定 Methods of microbiological examination for barber's tools Determination of staphylococcus aureus
公共场所拖鞋微生物检验方法 霉菌和酵母菌测定 Method of microbiological examination for slippers in public places Determination of molds and yeasts count
游泳池水微生物检验方法 细菌总数测定 Methods of microbiological examination for water in swimming pool Determination of aerobic bacterial count
游泳池水微生物检验方法 大肠菌群测定 Methods of microbiological examination for water in swimming pool Determination of coliform bacteria
公共场所浴盆、脸(脚)盆微生物检验方法 细菌总数测定 Methods of microbiological examination for bath tube and wash basin in public places Determination of aerobic bacterial count
公共场所浴盆、脸(脚)盆微生物检验方法 大肠菌群测定 Methods of microbiological examination for bath tube and wash basin in public places Determination of coliform bacteria
公共场所气温测定方法 Method for determination of air temperature in public places
公共场所气湿测定方法 Method for determination of air humidity in public places
公共场所风速测定方法 Method for determination of wind speed in public places
公共场所气压测定方法 Method for determination of atmospheric pressure in public places
公共场所辐射热测定方法 Method for Determination of thermal radiation in public places
公共场所室内新风量测定方法 示踪气体法 Method for determination of air change flow of indoor air in public places--Tracer gas method
公共场所室内换气率测定标准方法 Standaard method for measurement of infiltration rates of indoor air in public places
公共场所采光系数测定方法 Methods for determination of daylighting efficient in public places
公共场所照度测定方法 Methods for determination of illumination in public places
公共场所噪声测定方法 Methods for determination of noise in public places
公共场所空气中--氧化碳测定方法 Methods for determination of carbon monoxide in air of public places
公共场所空气中二氧化碳测定方法 Methods for determination of carbon dioxide in air of public places
公共场所空气中氨测定方法 Method for determination of ammonia in air of public places
公共场所空气中甲醛测定方法 Methods for determination of formaldehyde in air of public places
公共场所空气中臭氧测定方法 Method of determination of ozone in air of public places
游泳水温度测定方法 Method for determination of Temperature in water of swimming place
游泳水中尿素测定方法 Method for determination of urea in water of swimming place
海滨游泳水中透明度测定方法 Methods for determination of transparenty in water of seashore swimming place
学校卫生监督综合评价 Comprehensive appraisement for health inspection in schools
中、小学生健康教育规范 Regulation of health education for students in primary and middle school
机械安全 指示、标志和操作 第1部分:关于视觉、听觉和触觉信号的要求 Safety of machinery indication,marking and actuation Part 1: Requirements for visual,auditory and tactile signals
机械安全 指示、标志和操作 第2部分:标志要求 Safety of machinery indication,marking and actuation Part 2: Requirements for marking
激光安全标志 Laser safety signs
重大危险源辨识 Identification of major hazard installations
烟草加工系统 粉尘防爆安全规程 Safety regulation for dust explosion in processing tobacco system
在用汽车排气污染物限值及测试方法 Limits and measurement methods for exhausts of pollutants from in-use vehicles
火灾技术鉴定方法 第1部分: 紫外光谱法 Technical identification method for fire Part 1: Ultraviolet spectrum analysis
燃气轮机 烟气排放 第1部分: 测量与评估 Gas turbines--Exhaust gas emission--Part 1: Measurement and evaluation
燃气轮机 烟气排放 第2部分: 排放的自动监测 Gas turbines--Exhaust gas emission--Part 2: Automated emission monitoring
轻型汽车污染物排放限值及测量方法(I) Limits and measurement methods for emissions of pollutants from light-duty vehicles(I)
轻型汽车污染物排放限值及测量方法(Ⅱ) Limits and measurement methods for emissions of pollutants from light-duty vehicles(Ⅱ)
卧姿人体全身振动舒适性的评价 Comfort evaluation of human exposure to whole-body vibration in recumbent position
服装热阻测试方法 暖体假人法 Testing method for clothing thermal resistance--Thermal manikin method
海洋石油勘探开发污染物 生物毒性分级 Biological toxicity grading for pollutant from marine petroleum exploration and exploitation
海洋石油勘探开发污染物 生物毒性检验方法 Biological toxicity inspection method for pollutant from marine petroleum exploration and exploitation
海洋生物质量 Marine biological quality
自动灭火系统用玻璃球 Glass bulbs used for automatic fire extinguishing systems
民用航空地面事故等级 Classification for ground accidents of civil aviation
潜水呼吸气体 Breathing gases for divers
机动车驾驶员身体条件及其测评要求 Physical qualifications for automobile drivers and their test protocol
医用X射线治疗放射卫生防护要求 Requirements for radiological protection in medical X-ray therapy
工业γ射线探伤放射卫生防护要求 Radiological protection requirements for industrial gamma clefect detecting requirements
室内空气中对二氯苯卫生标准 Hygienic standard for P-dichlorobenzene in indoor air
无泵型采样(检测)器技术规范 Technical specifications for passive sampler and monitor
饮食业油烟排放标准 Emission standard of cooking fume
危险废物焚烧污染控制标准 Pollution control standard for hazardous wastes incineration
生活垃圾焚烧污染控制标准 Standard for pollution control on the municipal solid waste incineration
污水海洋处置工程污染控制标准 Standard for pollution control of sewage marine disposal engineering
作业场所紫外辐射职业接触限值 Occupational exposure limif of ultraviolet radiation in the work environment
车间空气中乙醛职业接触限值 Occupalional exposnre himit for acetaldehyde in the air of workplace
车间空气中碳纤维粉尘职业接触限值 Occupational exposure limit for carbon fiber dust in the air of workplace
车间空气中磷酸职业接触限值 Occupational exposure limit for phosphoric acid in the air of workplace
车间空气中聚丙烯腈纤维粉尘职业接触限值 Occupational exposure limit for polyacrylonitrile fibre dust in the air of workplace
车间空气中多次甲基多苯基多异氰酸酯职业接触限值 Occupational exposure limit for polymethylene polyphenyl isocyanate(PMPPI) in the air of workplace
车间空气中丁酮职业接触限值 Occupational exposure limit for methyl ethyl ketone in the air of workplace
车间空气中膨润土粉尘职业接触限值 Occupational exposure limit for bentonite dust in the air of workplace
车间空气中三氯氧磷职业接触限值 Occupational exposure limit for phosphorus oxychioride in the air of workplace
车间空气中马来酸酐职业接触限值 Occupational exposure limit for maleic anhydride in the air of workplace
车间空气中乙醇胺职业接触限值 Occupational exposure limit for ethanolamine in the air of workplace
车间空气中环氧丙烷职业接触限值 Occupational exposure limit for propylene oxide in the air of workplace
车间空气中氧化钙职业接触限值 Occupational exposure limit for calcium oxide in the air of workplace
车间空气中酚醛树脂粉尘的职业接触限值 Occupational exposure limit for phenol formaldehyde resin in the air of workplace
车间空气中沸石粉尘职业接触限值 Occupational exposure limit for zeolite dust in the air of workplace
车间空气中氢醌的职业接触限值 Occupational exposure limit for hydroquinone in the air of workplace
车间空气中重晶石粉尘职业接触限值 Occupational exposure limit for barite dust in the air of workplace
车间空气中玻璃钢粉尘职业接触限值 Occupational exposure limit for fiberglass reinforced plastic dust in the air of workplace
车间空气中硅灰石粉尘职业接触限值 Occupational exposure limit for wollastonite dust in the air of workplace
车间空气中二巯基辛基锡职业接触限值 Occupational exposure limit for dioctyltin-S,S'-bis(isooctylmercaptoacetate) in the air of workplace
车间空气中二氯苯职业接触限值 Occupational exposure limit for dichlorobenzene in the air of workplace
车间空气中2-乙氧基乙醇职业接触限值 Occupational exposure limit for 2-Ethoxyethanol in the air of workplace
车间空气中乙酐职业接触限值 Occupational exposure limit for acetic anhydride in the air of workplace
车间空气中丙酮氰醇职业接触限值 Occupational exposure limit for acetone cyanohydrin in the air of workplace
车间空气中钽及其氧化物职业接触限 Occupational exposure limit for tantalum and its oxide in the air of workplace
车间空气中石油沥青(烟)职业接触限值 Occupational exposure limit for petroleum asphalt(fume) in the air of workplace
高原地区车间空气中--氧化碳职业接触限值 Occupational exposure limit for carbon monoxide in the air of high altitude workplace
作业场所高频电磁场职业接触限值 Occupational exposure limit for high frequency field in the work environment
车间空气中炔诺孕酮职业接触限值 Occupational exposure limit for norgestrel in the air of workplace
车间空气中乙酰甲胺磷职业接触限值 Occupational exposure limit for acephate in the air of workplace
车间空气中沉淀二氧化硅(白炭黑)粉尘职业接触限值 Occupational exposure limit for precipitated silica dustin the air of workplace
车间空气中三硝基甲苯职业接触限值 Occupational exposure limit for trinitrotoluene in the air of workplace
车间空气中尿素职业接触限值 Occupational exposure limit for urea in the air of workplace
车间空气中1,1,1-三氯乙烷职业接触限值 Occupational exposure limit for 1,1,1-trichloroethane in the air of workplace
车间空气中氰氨化钙(石灰氮)职业接触限值 Occupational exposure limit for calcium cyanamide in the air of workplace
车间空气中聚氯乙烯粉尘职业接触限值 Occupational exposure limit for polyvinyl chloride dust in the air of workplkace
机械安全 减小由机械排放的危害性物质对健康的风险 第1部分: 用于机械制造商的原则和规范 Safety of machinery--Reduction of risks to health from hazardous substances emitted by machinery--Part 1: Principles and specifications for machinery manufacturers
机械安全 减小由机械排放的危害性物质对健康的风险 第2部分: 产生验证程序的方法学 Safety of machinery--Reduction of risks to health from hazardous substances emitted by machinery--Part 2: Methodology leading to verification procedures
畜禽养殖业污染物排放标准 Discharge standard of pollutants for livestock and poultry breeding
危险废物贮存污染控制标准 Standard for pollution control on hazardous waste storage
危险废物填埋污染控制标准 Standard for pollution control on the security landfill site for hazardous wastes
一般工业固体废物贮存、处置场污染控制标准 Standard for pollution on the storage and disposal site for general industrial solid wastes
环境管理体系 规范及使用指南 Enviromental management systems--Specification with guidance for use
环境管理体系 原则、体系和支持技术通用指南 Environmental management systems--General guidelines on principles,systems and supporting techniques
环境审核指南 通用原则 Guidelines for environmental auditing--General principles
环境审核指南 审核程序 环境管理体系审核 Guidelines for environmental auditing--Audit procedures--Auditing of environmental management systems
环境审核指南 环境审核员资格要求 Guidelines for environmental auditing--Qualification criteria for environmental auditors
环境管理 环境标志和声明 通用原则 Environmental management environmental labels and declarations--General principles
环境管理 环境标志和声明 自我环境声明(Ⅱ型环境标志) Environmental management Environmental labels and declarations--Self-declared environmental claims (Type Ⅱ environmental labelling)
环境管理 环境标志和声明 Ⅰ型环境标志 原则和程序 Environmental management environmental labels and declarations--Type Ⅰ environmental labelling--Principles and procedures
环境管理 环境表现评价 指南 Environmental management--Envionmental perfor mance evaluation--Guidelines
环境管理 生命周期评价 原则与框架 Environmental management--Life cycle assessment--Principles and frameworks
环境管理 生命周期评价 目的与范围的确定和清单分析 Enviromental management--Life cycle assessment--Goal and scope defination and inventory analysis
环境管理 术语 Environmental management--Vocabulary
职业健康安全管理体系 规范 Occupational health and safety management system--Specification
产品几何量技术规范(GPS)圆锥的锥度与锥角系列 Geometrical product specifications(GPS) Series of conical tapers and taper angles
评定变色用灰色样卡 Gray scale for assessing change in colour
评定沾色用灰色样卡 Gray scale for assessing staining
优先数和优先数系 Preferred numbers and preferred number series
TGT型台秤 TGT type beam counter poise platform scale
AGT型案秤 AGT type counter scale with weights
石油产品试验用液体温度计 技术条件 Liquid in glass thermometers for petroleum products--Specification
电气测量指示仪表通用技术条件 Electrical indicating measuring instruments--General specification
工业自动化仪表用模拟气动信号 Analogue pneumatic signal for industrial process measurement and control instruments
冷水水表 第1部分: 规范 Measurement of water flow in closed conduits--Meters for cold potable water--Part 1: Specifications
冷水水表 第2部分: 安装要求 Measurement of water flow in closed conduits--Meters for cold potable water--Part 2: Installation requirements
冷水水表 第3部分: 试验方法和试验设备 Measurement of water flow in closed conduits--Meters for cold potable water--Part 3: Test methods and equipment
光学计 Optimeter
冲击试验用示波器和峰值电压表 Oscilloscopes and peak volmeters for impulse tests
表面粗糙度 参数及其数值 Surface rougnness--Parameters and their values
水准泡 Level
形状和位置公差 通则、定义、符号和图样表示法 Geometrical tolerancing--Generalities,definitions,symbols,indications on drawings
形状和位置公差 未注公差值 Geometrical tolerancing--Geometrical tolerance for features without individual tolerance indications
光学零件表面疵病 Surface imperfections of optical elements
游标类卡尺 通用技术条件 The specification for callipers of vernier type
游标类卡尺 游标卡尺 The vernier callipers for callipers of vernier type
游标类卡尺 高度游标卡尺 The high gauge for callipers of vernier type
游标类卡尺 深度游标卡尺 The depth gauge for callipers of vernier type
外径千分尺 Micrometers
公法线千分尺 Gear tooth micrometers
深度千分尺 Depth micrometers
几何量技术规范 长度测量器具: 指示表 设计及计量技术要求 Geometrical product apecification--Dimensional measuring instruments:Dial gauges--Design and metrological requirements
几何光学术语、符号 Vocabulary and character for geometrical optics
一般压力表 General pressure gauge
精密压力表 Accurate pressure gauge
光学样板 Photo-templates gauge
安装式指示和记录电测量仪表的尺寸 Dimensions for panel mounted indicating and recording electrical measuring instruments
流量测量仪表基本参数 Basic parameters for flow measuring instruments
插口式灯头的量规 Gauges for bayonet lamp caps
米制锥螺纹量规 Gauges for tapered screw thread,metric series
铂铑13 铂热电偶丝 Platinum-13% Rhodium/Platinum thermocouple wires
极限与配合 基础 第1部分:词汇 Limits and fits--Bases--Part 1: Terminology
极限与配合 基础 第2部分: 公差、偏差和配合的基本规定 Limits and fits--Bases--Part 2: Basic rules of tolerances,deviations and fits
极限与配合 基础 第3部分: 标准公差和基本偏差数值表 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations
极限与配合 标准公差等级和孔、轴的极限偏差表 Limits and fits-Tables of standard tolerance grades and limit deviations for holes and shafts
极限与配合 公差带和配合的选择 Limits and fits-Selection of tolerance zones and fits
公差与配合 尺寸至18mm孔、轴公差带 Tolerance and fitting, dimensions up to 18mm holes, shaft tolerance range
一般公差 未注公差的线性和角度尺寸的公差 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications
锡精矿中锑量的测定 (孔雀绿吸光光度法) Determination of antimony content in tin concentrates --Malachite green photometric method
锡精矿中铋量的测定 (二硫代二安替比林甲烷吸光光度法) Determination of bismuth content in tin concentrates-- Dithiodiantipyryl methane photometric method
锡精矿中锌量的测定 (极谱法) Determination of zinc content in tin concentrates-- Polarographic method
锡精矿中三氧化钨量的测定 (硫氰酸盐吸光光度法) Determination of tungsten trioxide content in tin concentrates--Thiocyanate photometric method
锡精矿中三氧化二铝量的测定 (铬天青S 吸光光度法) Determination of aluminium oxide content in tin concentrates--Chromazurol S photometric method
锡精矿中二氧化硅量的测定 (硅钼蓝吸光光度法) Determination of silicon dioxide content in tin concentrates--Silicon molybdenum blue photometric method
锡精矿中氧化镁量的测定 (二甲苯胺蓝Ⅱ吸光光度法) Determination of magnesium oxide content in tin concentrates--Xylidyl blue Ⅱ photometric method
往复式内燃机 辐射的空气噪声测量工程法及简易法 Reciprocating internal combustion engines--Measurement of emitted airborne noise--Engineering method and survey method
石油计量表 Petroleum measurement tables
光滑极限量规 Limit gauges for plain workpiece
形状和位置公差 检测规定 Rules for inspection of form and position tolerances
机械振动与冲击 术语 Mechanical vibration and shock?Terminology
镍铬 镍硅热电偶丝 Nickel-Chromium/Nickel-Silicon thermocouple wires
流量测量节流装置 用孔板、喷嘴和文丘里管测量充满圆管的流体流量 Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
标准尺寸 Standard linear dimensions
风机和罗茨鼓风机噪声测量方法 Methods of noise measurement for fans, blowers compressors and Roots blowers
铂铑30 铂铑6热电偶丝 Platinum-30% Rhodium/Platinum-6%Rhodium thermocouple wires
铜 铜镍(康铜)热电偶丝 Copper/Copper-Nickel(Constantan) thermocouple wires
镍铬-金铁、铜-金铁低温热电偶丝及分度表 Nickel-chromium/gold-iron, copper/gold-iron low temperature thermocouple wires and their reference tables
工业用热电偶丝检验方法 Testing methods for industrial thermocouple wires
城市区域环境噪声标准 Standard of environmental noise of urban area
光学零件球面半径数值系列 Radii of spherical surfaces of optical elements series of numerical values
光学经纬仪系列及其基本参数 The series of optical theodolites and its basic parameters
光滑工件尺寸的检验 Inspection of plain workpiece sizes
颜料分类、命名和型号 Classification, nomenclature and type for pigments
声学 环境噪声测量方法 Acoustics--Measurement method of environmental noise
声学 水声换能器自由场校准方法 Acoustics--Free-field calibration method of underwater sound transducers
声学量的级及其基准值 Acoustical levels and refrence quantities
声学测量中的常用频率 Preferred frequencies for the acoustical measurement
光学分度头 Optical dividing head
齿轮基本术语 Basic terminology of gears
工业过程测量和控制系统用电动和气动模拟记录仪和指示仪性能评定方法 Methods of evaluating the performance of electrical and pneumatic analog recorders and indicators for industrial-process measurement and control systems
工业过程测量和控制系统用动圈式指示仪性能评定方法 Methods of evaluating the performance of moving coil ind for industrial-process measurement and control systems
差动电阻式应变计 Unbonded elastic wire resistance type strain meter
差动电阻式钢筋计 Unbonded elastic wire resistance type reinforced concrete meter
差动电阻式测缝计 Unbonded elastic wire resistance type joint meter
差动电阻式孔隙压力计 Unbonded elastic wire resistance type pore pressure cell
电阻比电桥 Wheatstone bridge for unbonded elastic wire resistance meter
埋入式铜电阻温度计 Embedded Cu resistance thermometer
铁路机车车辆内部噪声测量 Measurement of noise inside railway vehicles
铁路机车司机室噪声允许值 Allowed value of noise inside driver's compartment of locomotive
产品几何技术规范 表面结构 轮廓法 表面结构的术语、定义及参数 Geometrical product specifications (GPS)--Surface texture:Profile method--Terms,definitions and surface texture parameters
万能测长仪 Universal horizontal metroscope
工具显微镜 Toolmaker's microscope
光学长度计量仪器 基本参数 Optical length measuring instruments--Basic parameters
卡套式压力表管接头 Connector for pressure gauge--Assembly
卡套式压力表接头体 Connector for pressure gauge--Boby
声学 声压法测定噪声源声功率级 反射面上方近似自由场的工程法 Acoustics--Determination of sound power levels of noise sources using sound pressure--Engineering method in an essentially free field over a reflecting plane
声学 声压法测定噪声源声功率级 反射面上方采用包络测量表面的简易法 Acoustics--Determination of sound power levels of noise sources using sound pressure--Survey method using an enveloping measurement surface over a reflecting plane
木工机床噪声声功率级的测定 Determination of sound power level for noise emitted by woodworking machinery
铂铑10 铂热电偶丝 Platinum-10% Rhodium/Platinum thermocouple wires
声级计的电、声性能及测试方法 Electric,sonic properties and measuring methods for sound level meters
普通螺纹量规 Gauges for general purpose screw threads
声学名词术语 Acoustical terminology
颜色的表示方法 Methods of color specification
标准照明体及照明观测条件 Standard illuminants and illuminating--viewing conditions
物体色的测量方法 Methods of measuring the colour of materials
液体闪烁计数用的瓶子尺寸 Dimensions of vials for liquid scintillation counting
用于放射性测量的试管尺寸 Dimensions of test tubes for radioactivity measurements
产品几何量技术规范(GPS)棱体的角度与斜度系列 Geometrical product specifications(GPS) Series of angler and slopes on prisms
声学 标准水听器 Acoustics--Standard hydrophone
声学 噪声源声功率级的测定--标准声源的性能要求与校准 Acoustics--Determination of sound power levels of noise sources--Requirements for the performance and calibration of reference sound source
声学 水听器低频校准方法 Acoustics--Low frequency calibration methods of hydrophones
1~5 等砝码 Class 1~5 weights
非自动天平 杠杆式天平 Non-automatic balance - Beam balance
声学 家用电器及类似用途器具噪声测试方法 第1部分: 通用要 Acoustics-Household and similar electrical appliances--Test code for determination of airborne acoustical noise Part 1: General requirements
金属切削机床噪声声功率级的测定 Determination of sound power levels of noise emitted by metal cutting machine tools
公差原则 Tolerancing principle
光学传递函数 术语、符号 Optical transfer function--Terminology, symbol
光学传递函数 测量导则 Optical transfer function--Directives of measurement
确定圆度误差的方法 两点、三点法 Assessment of departure from roundness--Two-and three-point methods
工业自动化仪表振动 (正弦) 试验方法 Methods of vibration (sinusoidal) test for use in industrial process measurement and control instrument
船上噪声测量 Acoustics--Measurement of noise on board vessels
电容式电压互感器 Capacitor voltage transformers
扭簧比较仪 Microkator
直读/非直读式电容型袖珍剂量计 Direct or indirect-reading capacitor-type pocket dosemeters
辐射防护用携带式 X、γ辐射剂量率仪和监测仪 Portable X or gamma radiation doserate meters and monitors for use in radiation protection
声学 校准测听设备的基准零级 第3部分: 骨振器纯音基准等效阈力级 Acoustics--Reference zero for the calibration of audiometric equipment--Part 3: Reference equivalent threshold force levels for pure tones and bone vibrators
模拟计数率表特性和测试方法 Analogue counting ratemeters characteristics and test methods
电子探针分析标准样品通用技术条件 General specification of electron probe microanalysis standard specimen
自由场纯音标准等响线 Normal equal-loudness contours for pure tones under free field listening conditions
内河航道及港口内船舶辐射噪声的测量 Measurement of noise emitted by vessels on inland water ways and harbours
热电偶用补偿导线 Extension and compensating cables for thermocouples
热电偶用补偿导线合金丝 Alloy wires of extension and compensating cables for thermocouples
镍铬 铜镍(康铜)热电偶丝 Nickel-Chromium/Copper-Nickel(Constantan) thermocouple wires
铁 铜镍(康铜)热电偶丝 Iron/Copper-Nickel(Constantan) thermocouple wires
固定式杠杆秤 Stationary lever scale
圆柱直齿渐开线花键量规 Gauges for straight cylindrical involute splines
声学 铁路机车车辆辐射噪声测量 Acoustics--Measurement of noise emitted by railbound vehicles
带电粒子半导体探测器测试方法 Test procedures for semiconductor charged particle detectors
α,β 和α-β表面污染测量仪与监测仪 Alpha,beta and alpha-beta surface contamination meters and monitors
水下噪声测量 Measurement of underwater noise
水声材料纵波声速和衰减的测量 脉冲管法 Measurement of the longitudinal wave velocity and attenuation for underwater acoustical materials--Pulse-tube method
公差与配合 过盈配合的计算和选用 Tolerances and fits--The calculation and selection of interference fits
负荷传感器名词术语 Load cell terminology and definitions
负荷传感器试验方法 Load cell test procedure
颜色术语 Glossary of color terms
采光测量方法 Methods of daylighting measurements
室内照明测量方法 Measurement methods for interior lighting
室内空调至适温度 Optimum temperature in air-conditioning room
光源显色性评价方法 Method of evaluating colour rendering properties of light sources
凿岩机械与气动工具噪声测量方法--工程法 Measurement of noise emitted by rock drilling machines and pneumatic tools--Engineering method
NIM标准仪器系统 NIM standard instrumentation system
核仪器用高压同轴连接器 High voltage coaxial connectors used in nuclear instrumentation
电阻温度计用铂丝 Platinum wires for resistance thermometers
海洋船舶噪声级规定 Regulation on noise levels on board sea-going ships
内河船舶噪声级规定 Regulation on noise levels on board inland ships
表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面 Roughness comparison specimens--Ground, turned, bored,milled, shaped and planed
表面粗糙度比较样块 电火花加工表面 Roughness comparison specimens--Spark-erosion machining surfaces
表面粗糙度比较样块 抛光加工表面 Roughness comparison specimens--Polshed surfaces
表面粗糙度比较样块 抛(喷)丸、喷砂加工表面 Roughness comparison specimens--Shot-blasted and grit-blasted surfaces
轮廓法触针式表面粗糙度测量仪 轮廓记录仪及中线制轮廓计 Stylus instruments for the measurement of surface roughness by the profile method profile recording instruments and profile meters by the system M
在非旋转部件上测量和评价机器的机械振动 第1部分: 总则 Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 1: General guidelines
在非旋转部件上测量和评价机器的机械振动 第3部分: 额定功率大于15kW额定转速在120r/min至15000r/min之间的在现场测量的工业机器 Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 3:Industrial machines with nominal power above 15kW and nominal speeds between 120r/min and 15000r/min when measured in situ
在非旋转部件上测量和评价机器的机械振动 第4部分: 不包括航空器类的燃气轮机驱动装置 Mechanical vibration--Evaluation of machine vibration by measurements on non-rotating parts--Part 4: Gas turbine driven sets excluding aircraft derivatives
刀口形直尺 Straight edge
90°角尺 Squares 90°
几何量技术规范(GPS) 长度标准 量块 Geometrical product specifications(GPS)--Length standards--Gauge blocks
无线电干扰和抗扰度测量设备规范 Specifications for radio disturbance and immunity measuring apparatus
大量程百分表 Long range dial gauges
壁厚千分尺 Tube micrometers
尖头千分尺 Point micrometers
三爪内径千分尺 Three point internal micrometers
游标万能角度尺 Vernier universal bevel protractor
齿厚游标卡尺 Gear tooth vernier calipers
带表卡尺 Dial calipers
光学扭簧测微计 Spring-optical measuring heads,opticators
光滑极限量规型式和尺寸 Types and dimensions of plain limit gauges
拖拉机噪声限值 Noise limitation for tractors
振动空蚀试验方法 The method of vibration cavitation erosion test
地质图用色标准 比例尺1:500000 - 1:1000000 Colour standard for use in the geological map
飞机噪声测量用频率计权(D-计权) Frequency weighting for the measurement of aircraft noise (D-weighting)
阴极射线示波器通用规范 General specification for cathod-ray oscilloscopes
电子测量仪器质量检验规则 Quality inspection provisions for electronic measuring instruments
电测量指示和记录仪表及其附件的安全要求 Safety requirements for indicating and recording electrical measuring instruments and their accessories
电子测量仪器电磁兼容性试验规范 总则 Electromagnetic compatibility test specification for electronic measuring instruments--Generality
电子测量仪器电磁兼容性试验规范 磁场敏感度试验 Electromagnetic compatibility test specification for electronic measuring instruments--Magnetic field susceptibility test
电子测量仪器电磁兼容性试验规范 静电放电敏感度试验 Electromagnetic compatibility test specification for electronic measuring instruments--Electrostatic discharge susceptibility test
电子测量仪器电磁兼容性试验规范 电源瞬态敏感度试验 Electromagnetic compatibility test specification for electronic measuring instruments--Power line transient susceptibility tset
电子测量仪器电磁兼容性试验规范 辐射敏感度试验 Electromagnetic compatibility test specification for electronic measuring instruments--Radiated susceptibility test
电子测量仪器电磁兼容性试验规范 传导敏感度试验 Electromagnetic compatibility test specification for electronic measuring instruments--Conducted susceptibility test
电子测量仪器电磁兼容性试验规范 非工作状态磁场干扰试验 Electromagnetic compatibility test specification for electronic measuring instruments--Non-operating magnetic field interference test
电子测量仪器电磁兼容性试验规范 工作状态磁场干扰试验 Electromagnetic compatibility test specification for electronic measuring instruments--Operating magnetic field interference test
电子测量仪器电磁兼容性试验规范 传导干扰试验 Electromagnetic compatibility test specification for electronic measuring instruments--Conduced interference test
电子测量仪器电磁兼容性试验规范 辐射干扰试验 Electromagnetic compatibility test specification for electronic measuring instruments--Radiated interference test
声学 噪声源声功率级的测定 混响室精密法和工程法 Acoustics--Determination of sound power levels of noise sources--Precision methods and engineering methods for reverberation rooms
声学 噪声源声功率级的测定 消声室和半消声室精密法 Acoustics--Determination of sound power levels of noise sources--Precision methods for anechoic and semi-anechoic rooms
预聚焦式灯头的量规 Gauges of prefocus caps
船用电气设备振动 (正弦) 试验方法 Vibration test of electrical installation in ships
纺织机械噪声声功率级的测定方法 Determination of sound power levels of noise emitted by textile machinery
气态排出流(放射性)活度连续监测设备 第一部分: 一般要求 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 1: General requirements
气态排出流(放射性)活度连续监测设备 第二部分: 气溶胶排出流监测仪的特殊要求 Equipment for continuously monitoring radioactivity in gaseous effluents--part 2: Specific requirements for aerosol effluent monitors
气态排出流(放射性)活度连续监测设备 第三部分: 惰性气体排出流监测仪的特殊要求 Equipment for continuously monitoring radioactivity in gaseous effluents - Part 3: Specific requirements for noble gas effluent monitors
气态排出流(放射性)活度连续监测设备 第四部分: 碘监测仪的特殊要求 Equipment for continuously monitoring radioactivity in gaseous effluents - Part 4: Specific requirements for iodine monitors
气态排出流(放射性)活度连续监测设备 第五部分: 氚排出流监测仪的特殊要求 Equipment for continuously monitoring radioactivity in gaseous effluents--Part 5: Specific requirements for tritium effluent monitors
气态排出流(放射性)活度连续监测设备 第六部分: 超铀元素气溶胶排出流监测仪的特殊要求 Equipment for continuously monitoring radioactivity in gaseous effluents - Part 6: Specific requirements for transuranic aerosol effluent monitors
核动力堆堆芯或堆主包壳内温度测量特性和测试方法 In-core temperature or primary envelope temperature measurements in nuclear power reactor - Characteristics and test methods
锗γ射线探测器测试方法 Test procedures for germanium gamma-ray detectors
铁路内燃机车动力室噪声测量 Measurement of noise in engine room of diesel locomotives
铁道干线电力机车车内设备机械振动烈度评定方法 Evaluation of mechanical vibration severity of machines and equipments in electric locomotives
中小功率柴油机振动测量方法 Measurement method of vibration for small and medium power diesel engines
表面粗糙度 术语 参数测量 Surface roughness--Terminology--Measurement of surface roughness parameters
圆度测量 术语、定义及参数 Measurement of roundness--Terms, definitions and parameters of roundness
评定圆度误差的方法 半径变化量测量 Methods for the assessment of departure from roundness--Measurement of variations in radius
模拟式过程测量和控制仪表性能表示方法 导则 Guidelines for presenting performance of analog process measurement and control instrument
金属与非金属材料全法向发射率试验方法 Test method for total normal emittance of metals and nonmetallic materials
金属与非金属材料光谱法向发射率试验方法 Test method for normal spectral emittance of metals and nonmetallic meterials
变压器和电抗器的声级测定 Determination of transformer and reactor sound levels
听力计: 第1部分 纯音听力计 Audiometers Part 1: Pure-tone audiometers
听力计: 第2部分 语言测听设备 Audiometers Part 2: Equipment for speech audiometry
听力计: 第3部分 用于测听与神经耳科的短持续听觉测试信号 Audiometers Part 3: Auditory test signals of short duration for audiometric and neuro-otological purposes
听力计: 第4部分 延伸高频测听的设备 Audiometers Part 4: Equipment for extended high-frequency audiometry
测听耳机校准用IEC临时参考耦合腔 IEC provisional reference coupler for the calibration of earphones used in audiomety
利用放射源的电测量仪表 Electrical measuring instruments utilizing radioactive sources
工业自动化仪表盘、柜、台、箱 Panel,cabinet,console and case for industrial-process measurement and control equipment
局部放电测量 Partial discharge measurements
电站汽轮发电机组噪声测量方法 Noise measurement method for the power plant turbine generator
称重传感器 Load cells
声学 耳科正常人的气导听阈与年龄和性别的关系 Acoustics--Threshold of hearing by air conduction as a function of age and sex for otologically normal persons
声学 纯音气导听阈测定 听力保护用 Acoustics--Pure tone air conduction threshold audiometry--For hearing conservation purposes
声学 护耳器声衰减的测量 主观法 Acoustics--Measurement of sound attenuation of hearing protectors--Subjective method
立式平衡机校验法 Method of verification for vertical balancing machines
传感器通用术语 General terminology for transducers
传感器命名方法及代号 Nomenclature and code for transducers
电动振动试验设备特性的描述方法 Electrodynamic test equipment for generating vibration--Methods of describing equipment characteristics
直接作用模拟指示电测量仪表及其附件 第1部分: 定义和通用要求 Direct acting indicating analogue electrical measuring instruments and their accessories Part 1: Definition and general requirements common to all parts
直接作用模拟指示电测量仪表及其附件 第2部分: 电流表和电压表的特殊要求 Direct acting indicating analogue electrical measuring instruments and their accessories Part 2: Special requirements for ammeters and voltmeters
直接作用模拟指示电测量仪表及其附件 第3部分: 功率表和无功率表的特殊要求 Direct acting indicating analogue electrical measuring instruments and their accessories Part 3: Special requirements for wattmeters and varmeters
直接作用模拟指示电测量仪表及其附件 第4部分: 频率表的特殊要求 Direct acting indicating analogue electrical measuring instruments and their accessories Part 4: Special requirements for frequency meters
直接作用模拟指示电测量仪表及其附件 第5部分: 相位表、功率因数表和同步指示器的特殊要求 Direct acting indicating analogue electrical measuring instruments and their accessories Part 5: Special requirements for phase meters,power factor meters and synchroscopes
直接作用模拟指示电测量仪表及其附件 第6部分: 电阻表(阻抗表)和电导表的特殊要求 Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters(impedance meters) and conductance meters
直接作用模拟指示电测量仪表及其附件 第7部分: 多功能仪表的特殊要求 Direct acting indicating analogue electrical measuring instruments and their accessories Part 7: Special requirements for multi-function instruments
直接作用模拟指示电测量仪表及其附件 第8部分: 附件的特殊要求 Direct acting indicating analogue electrical measuring instruments and their accessories Part 8: Special requirements for accessories
直接作用模拟指示电测量仪表及其附件 第9部分: 推荐的试验方法 Direct acting indicating analogue electrical measuring instruments and their accessories Part 9: Recommended test methods
电子皮带秤 Electronic belt weighers
电子计价秤 Price computing scale
固定式电子衡 Stationary electronic scale
称重显示控制器 Weighting indication controller
特殊同色异谱指数的测定 改变照明体 Measurement of special metamerism index change in illuminant
动力用空气压缩机和隔膜压缩机噪声声功率级限值 Limits of sound power level for noise emitted by air compressors (for power source use) and diaphragm compressors
人造光学石英晶体 Optical grade synthetic quartz crystal
人造光学石英晶体试验方法 Test method for optical grade synthetic quartz crystal
杠杆式吨位天平 Tonnage lever balance
均匀色空间和色差公式 Uniform colour space and colour difference formula
照明光源颜色的测量方法 Methods of measuring the colour of light source
手扶拖拉机振动测量方法 Method of measurement for walking tractor vibration
声学 水声换能器测量 Acoustics--Measurement of underwater sound transducers
声学0.5 - 10MHz频率范围内超声声功率的测量 Acoustics--Ultrasonic power measurement in the frequency range 0.5 - 10MHz
声学 水声发射器的大功率特性和测量 Acoustics--High-power characteristics and measurements of underwater sound projectors
杠杆千分尺 Indicating micrometers
功能量规 Functional gauges
内径百分表 Dial bore gauges
杠杆指示表 Dial test indicators
梯形螺纹量规 技术条件 Gauges for metric trapezoidal scerew threads--Technical specifications
梯形螺纹量规 型式和尺寸 Type and size of gauges for metric trapezoidal screw threads
内径千分尺 Internal micrometers
昼光模拟器的评价方法 Method for assessing the quality of daylight simulators
振动与冲击隔离器确定特性要求导则 Vibration and shock--Isolators--Procedure for specifying characteristics
气象用玻璃液体温度表 Meteorological liquid-in-glass thermometer
凿岩机械与气动工具振动测量方法 总则 Measurement of vibrations in rock drilling machines and pneumatic tools--General
凿岩机械与气动工具振动测量方法 冲击式机器的测量 Measurement of vibrations in rock drilling machines and pneumatic tools--Measurement for percussive machines
凿岩机械与气动工具振动测量方法 回转式机器的测量 Measurement of vibrations in rock drilling machines and pneumatic tools--Measurement for rotation machines
钢直尺 Steel rulers
单杆式内径千分尺 Single-lody inside micrometers
奇数沟千分尺 Odd fluted micrometer
采暖通风与空气调节设备噪声声功率级的测定 工程法 Determination of sound power levels for noise emitted by heating, ventilating and air conditioning equipments--Engineering method
往复泵噪声声功率级的测定 工程法 Determination of sound power level for noise emitted by reciprocating pump--Engineering method
用于色度和光度测量的陶瓷标准白板 The white ceramic standard plate for colorimetry and photometry
用于色度和光度测量的粉体标准白板 The white powdered standard piate for colorimetry and photometry
感应分压器 Inductive voltage dividers
费率和负载控制时间开关 Time switch for tariff and load control
测量用稳定电源装置 Stabilized supply apparatus for measurement
光致变色玻璃眼镜片毛坯 Glass blanks of photochromic spectacle lens
回弹仪 Conrete test hammer
不可压缩流体流量计性能评定方法 Methods of evaluating the performance of flowmeters for incompressible fluide
脉冲信号发生器技术条件 The specifications of pulse signal generators
脉冲信号发生器测试方法 Test method of pules signal generators
荧光样品色的相对测量方法 Method for relative measurement of the colour of fluorescent samples
STZ3型电子测量仪器用连接器 STZ3 type connector for electronic measurement instrument
室内灯具光度测试 Photometry of indoor type luminaires
道路照明灯具光度测试 Photometry of luminaires for street lighting
机场周围飞机噪声环境标准 Standard of aircraft noise for environment around airport
机场周围飞机噪声测量方法 Measurement of aircraft noise around airport
船用柴油机辐射的空气噪声测量方法 Measurement method of airborne noise emitted by marine diesel engine
光学径纬仪 技术条件 Specifications for optical theodolite
光学和光学仪器 参考波长 Optics and optical instruments--Reference wavelengths
振动、冲击数据分析和表示方法 Vibration and shock--methods for analysis and presentation of data
测试结果的多重比较 Multiple comparison for test results
水准仪 Leveller
粘度测试方法 Methods for measurement and test of the viscosity
气体分析 校准用混合气体的制备 静态体积法 Gas analysis--Preparation of calibration gas mixtures-Static volumetric methods
γ放射免疫计数器 Gamma radioimmunoassay counter
放射性活度计 Radioactivity meter
核仪器和核辐射探测器质量检验规则 Quality inspection rule for nuclear instruments and nuclear radiation detectors
液体闪烁计数系统 Liquid-scintillation counting system
小面积镀(涂)层β反散射厚度计 Beta backscattering thickness meter for small area of plating (coating)
辐射探测器环境试验基本要求与方法 总则 Basic enviromental testing procedures for radiation detectors--General program
辐射探测器环境试验基本要求与方法 温度试验 Basic enviromental testing procedures for radiation detectors--Temperature test
辐射探测器环境试验基本要求与方法 潮湿试验 Basic enviromental testing procedures for radiation detectors--Moisture test
辐射探测器环境试验基本要求与方法 磁场试验 Basic enviromental testing procedures for radiation detectors--Tests for effect of magnetic field
辐射探测器环境试验基本要求与方法 光效应试验 Basic enviromental testing procedures for radiation detectors--Effective testing of exposure to light
辐射探测器环境试验基本要求与方法 辐照试验 Basic enviromental testing procedures for radiation detectors--Irradiation test
辐射探测器环境试验基本要求与方法 盐雾试验 Basic enviromental testing procedures for radiation detectors--Tests for effect of salt mist
辐射探测器环境试验基本要求与方法 振动试验 Basic enviromental testing procedures for radiation detectors--Vibration test
辐射探测器环境试验基本要求与方法 冲击试验 Basic enviromental testing procedures for radiation detectors--Shock test
辐射探测器环境试验基本要求与方法 包装运输试验 Basic enviromental testing procedures for radiation detectors--Transportation test
个人和环境监测用热释光剂量测量系统 Thermoluminescence dosimetry for personal and environmental monitoring
三分量井中磁力仪技术条件 Specification for three-component borehole magnetometer
悬丝磁力仪通用技术条件 General purpose specification of filar suspension magnetometer
高低温试验箱技术条件 Specification for low/high temperature test chambers
产品几何技术规范 表面结构 轮廓法评定表面结构的规则和方法 Geometrical product Specifications(GPS)-Surface texture:Profile method-Rules and procedures for the assessment of surface texture
矩形花键量规 Gauges for straight-sided splines
普通螺纹量规 型式和尺寸 Types and dimensions of gauges for general purpose screw threads
非螺纹密封的管螺纹量规 Gauges for pipe threads where pressure-tight joints are not made on the threads
螺纹千分尺 Thread micrometers
光学系统 参数的测定 Optical systems - Determination of parameters
光学系统杂(散)光测量方法 Veiling glare of optical systems - Methods of measurement
电导率仪试验方法 Test method of electric conductivity analyzers
电能表检验装置 Testing equipment for electrical energy meters
交流电桥 Alternating current bridge
高温试验箱技术条件 Specification for high temperature test chambers
低气压试验箱技术条件 Specification for low air pressure test chambers
电测量仪表标度盘与标度尺 Dial and scale of electrical instruments
光学分划零件通用技术条件 General specification of optical components for the scale and surface defects
直接动作电测量记录仪 Direct acting electrical measuring recorders
光学系统像质测试方法 Image quality of optical systems - Method of determination
圆锥公差 Cone tolerance
直线度误差检测 Measurement of departures from straightness
平面度误差检测 Measurement of departures from flatness
大型旋转机械振动烈度现场测量与评定 Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s - Measurement and evaluation of vibration severity in situ
旋转机械转轴径向振动的测量和评定 第1部分:总则 Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 1: General guidelines
旋转机械转轴径向振动的测量和评定 第2部分:陆地安装的大型汽轮发电机组 Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 2: Large land-based steam turbine generator sets
旋转机械转轴径向振动的测量和评定 第3部分:耦合的工业机器 Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 3: Coupled industrial machines
旋转机械转轴径向振动的测量和评定 第4部分:燃气轮机组 Mechanical vibration of non-reciprocating machines--Measurements on rotating shafts and evaluation criteria--Part 4: Gas turbine sets
助听器标准的指南 Guide to hearing aid standards
模拟实际工作条件下的助听器性能测量方法 Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
助听器用音频感应回路的磁场强度 Magnetic field strength in audio-frequency induction loops for hearing aid purposes
不完全佩戴在听者身上的助听设备 Hearing aid equipment not entirely worn on the listener
频谱分析仪通用技术条件 Generic specification of spectrum analzers
频谱分析仪测试方法 Test methods of spectrum analyzers
电子测量仪器可靠性试验 Reliability test for electronic measuring instruments
电子测量仪器术语 Terminology for electronic measuring instruments
电子测量仪器热分布图 Temperature profile for electronic measuring instruments
手传振动测量规范 Specification for measuring hand-transmitted vibration
湿度测量方法 Methods of humidity measurement
声学 实验室标准电容传声器的特性与规范 Acoustics - Characteristics and specifications for laboratory standard condenser microphones
低本底α测量仪 Low background alpha measuring instrument
应急辐射防护用携带式高量程 X、γ和β辐射剂量与剂量率仪 High range X, gamma and beta radiation dose and dose rate portable instrument for emergency radiation protection purposes
半导体X射线能谱仪的测试方法 Test procedures for semiconductor X-ray energy spectrometers
测试方法的精密度 在重复性或再现性条件下所得测试结果可接受性的检查和最终测试结果的确定 Precision of test methods - Check the acceptability of test results obtained under repeatability or reproducibility conditions and to determine final test results
旋杯式流速仪 Cup-type current meter
明渠水流测量 浮子式水位计 Liquid flow measurement in open channels - Float-type water level gauge
旋桨式流速仪 Propeller-type current meter
电子吊秤 Electronic crane scale
弹簧度盘秤 Spring dial scale
自动轨道衡 Automatic rail-weighbridges
电离辐射料位计 Level meter utilizing ionizing radiation
光学和光学仪器 环境试验方法 术语、试验范围 Optics and optical instruments - Environmental test methods - Definitions, extent of testing
光学和光学仪器 环境试验方法 低温、高温、湿热 Optics and optical instruments - Environmental test methods - Cold, heat, humidity
光学和光学仪器 环境试验方法 机械作用力 Optics and optical instruments - Environmental test methods - Mechanical stresses
光学和光学仪器 环境试验方法 盐雾 Optics and optical instruments - Environmental test methods - Salt mist
光学和光学仪器 环境试验方法 综合低温、低气压 Optics and optical instruments - Environmental test methods - Combined cold low air pressure
光学和光学仪器 环境试验方法 砂尘 Optics and optical instruments - Environmental test methods - Dust
光学和光学仪器 环境试验方法 淋雨 Optics and optical instruments - Environmental test methods - Rain
光学和光学仪器 环境试验方法 高压、低压、浸没 Optics and optical instruments - Environmental test methods - High pressure, low pressure, immersion
光学和光学仪器 环境试验方法 太阳辐射 Optics and optical instruments - Environmental test methods - Solar radiation
光学和光学仪器 环境试验方法 综合振动(正弦)与高温、低温 Optics and optical instruments - Environmental test methods - Combined sinusoidal vibration, dry heat, cold
光学和光学仪器 环境试验方法 长霉 Optics and optical instruments - Environmental test methods - Mould growth
光学和光学仪器 环境试验方法 污染 Optics and optical instruments - Environmental test methods - Contamination
光学和光学仪器 环境试验方法 冲击、碰撞或自由跌落与高温、低温 Optics and optical instruments - Environmental test methods - Shock, bump or freefall, dry heat, cold
光学和光学仪器环境试验方法 露、霜、冰 Optics and optical instruments - Environmental test methods - Dew, hoarfrost, ice
接触电流和保护导体电流的测量方法 Methods of measurement of touch-current and protective conductor current
高频信号发生器通用技术条件 Generic specification of high frequency signal generators
高频信号发生器测试方法 Measuring methods for high frequency signal generators
模拟电子电压表通用技术条件 Generic specification for electronic analog voltmeters
模拟电子电压表测试方法 Measuring methods for electronic analog voltmeters
用于校准表面污染监测仪的参考源 β发射体和α发射体 Reference sources for the calibration of surface contamination monitors - Beta-emitters and alpha-emitters
用于校准表面污染监测仪的参考源 第2部分: 能量低于0.15MeV的电子和能量低于1.5MeV的光子 Reference sources for the calibration of surface contamination monitors--Part 2: Electrons of energy less than 0.15MeV and photons of energy less than 1.5MeV
时(间)-幅(度)变换器测试方法 Characteristics and test methods for time-to-amplitude converters
用于校准剂量仪和剂量率仪及确定其能量响应的χ、γ参考辐射 X and γ reference radiations for calibrating dosemeters and dose ratemeters and for determining their energy response
用于校准剂量仪和剂量率仪及确定其能量响应的X和Υ参考辐射 第1部分: 辐射特性及产生方法 X and gamma reference radiation for calibrating dose-meters and doserate meters and for determining their response as a function of photon energy Part 1:Radiation characteristics and production methods
用于校准剂量(率)仪及确定其能量响应的β参考辐射 Reference beta radiations for calibrating dosemeters and doseratemeters and for determining their response as a function of beta radiation energy
噪声发生器通用技术条件 General specifications of noise generators
低频信号发生器通用测试方法 Test methods for general purpose low frequency signal generators
低频信号发生器通用技术条件 General purpose specification of low frequency signal generators
高性能屏蔽室屏蔽效能的测量方法 Measurement of shielding effectiveness of high-performance shielding enclosures
噪声发生器测试方法 Test methods for noise generator
海船声号器具的声压级测量 Measurement of sound pressure level for sound signal appliances by seagoing vessel
工业企业厂界噪声标准 Standard of noise at boundary of industrial enterprises
工业企业厂界噪声测量方法 Method of measuring noise at boundary of industrial enterprises
圆锥配合 Cone fit
建筑施工场界噪声限值 Noise limits for construction site
建筑施工场界噪声测量方法 Measurement method for noise from construction site
铁路边界噪声限值及其测量方法 Emission standards and measurement methods of railway noise on the boundary alongside railway line
远程光电测距规范 Specifications for long range electro-optical distance measurement
汽车速度表、里程表检验校正方法 Motor vehicles - Speedometer and odometer - Calibration method
工频电场测量 Measurement of power-frequency electric fields
核电厂事故及事故后辐射监测设备 第四部分: 工艺流辐射监测仪 Radiation monitoring equipment for accident and postaccident conditions in nuclear power plants--Part 4: Process stream radiation monitor
光学经纬仪试验方法 Method of test for optical theodolites
往复式机器整机振动测量与评级方法 Method of measurement and evaluation of mechanical vibration for reciprocating machines
国旗颜色标准样品 Standard color sample of national flag
直读式个人 X和γ辐射剂量当量和剂量当量率监测仪 Direct reading, personal dose equivalent and/or dose equivalent rate monitors for X and gamma radiation
环境中气载放射性碘监测设备 Equipment for monitoring airborne radioactive iodine in the environment
氡及氡子体测量仪与监测仪 一般要求 Radon and radondaughter meters and monitors?General requirements
电子测量仪器设计余量与模拟误用试验 Design margin and abuse tests for electronic measuring instruments
反射式电视测试图 综合测试图 Test charts of reflection for television?Multiple test chart
反射式电视测试图 线性测试图 A 型 Test charts of reflection for television?Linear test chart A
反射式电视测试图 线性测试图 B 型 Test charts of reflection for television?Linear test chart B
反射式电视测试图 高频特性测试图 Test charts of reflection for television?High-frequency test chart
反射式电视测试图 中频特性测试图 Test charts of reflection for television?Middle-frequency test chart
反射式电视测试图 余像测试图 Test charts of reflection for television?Residual-image test chart
反射式电视测试图 棋盘格测试图 Test charts of reflection for television?Checkerboard test chart
反射式电视测试图 辐值响应测试图 Test charts of reflection for television?Amplitude response test chart
反射式电视测试图 重合测试图 A 型 Test charts of reflection for television?Registration test chart A
反射式电视测试图 重合测试图 B 型 Test charts of reflection for television?Registration test chart B
反射式电视测试图 圆域测试图 Test charts of reflection for television?Circular zone test chart
反射式电视测试图 辐射条测试图 Test charts of reflection for television?Radiation stripe test chart
反射式电视测试图 区域测试图 Test charts of reflection for television?Area test chart
反射式电视测试图 灰度测试图 A 型 Test charts of reflection for television - Grayscale test chart A
反射式电视测试图 灰度测试图 B 型 Test charts of reflection for television?Grayscale test chart B
扫频信号发生器通用技术条件 General specification for sweep signal generators
扫频信号发生器测试方法 Measuring methods for sweep signal generators
高精度石英弹簧重力仪 通用技术条件 General purpose specification of high--Precise quartz spring gravimeter
水中碘-131的分析方法 Analytical method for 131I in water
植物、动物甲状腺中碘-131的分析方法 Analytical method for 131I in plant and animal thyroid gland
体积管式流量测量校准装置 Flow measurement calibration facility?Pipe prover
形状和位置公差 位置度公差 Geometrical tolerance - Positional tolerancing
机器和设备辐射的噪声 操作者位置噪声测量的基本准则 (工程级) Noise emitted by machinery and equipment--Guidelines for the preparation of test codes of engineering grade requiring noise measurements at the operator's or bystander's position
组合式空气处理机组噪声限值 Sound limit of central station air handling units
磁弹性测力称重传感器 Magnetoelastic force and weight transducers
扭转振动测量仪器技术要求 Technical requirements for torsional vibration measuring instruments
扭转振动减振器特性描述 Description of torsional vibration absorber characteristics
物质热稳定性的热分析试验方法 The rmal analysis test methods for the ermal stability of materials
岩土工程用钢弦式压力传感器 Vibrating steel wire pressure transducer for geotechnical engineering
DDZ-Ⅲ系列电动单元组合仪表 频率转换器 DDZ-Ⅲ series process electronic control system - Frequency converter
DDZ-Ⅲ系列电动单元组合仪表 恒流给定器 DDZ-Ⅲ series process electronic control system - Constant, current setter
DDZ-Ⅲ系列电动单元组合仪表 指示仪 DDZ-Ⅲ series process electronic control system - Indicating instrument
光学传递函数测量准确度 Optical transer function--accuracy of measurement
直流磁电系检流计 D.C.magnetoelectric galvanometer
镁及镁合金化学分析方法 铝量测定 Magnesium and its alloys--Determination of aluminium content
镁及镁合金化学分析方法 高碘酸盐分光光度法测定锰量 Magnesium and its alloys--Determination of manganese content--Periodate spectrophotometric method
镁及镁合金化学分析方法 二甲苯酚橙分光光度法测定锆量 Magnesium and its alloys--Determination of zirconium content--Xylenol orange spectrophotometric method
镁及镁合金化学分析方法 三溴偶氮胂分光光度法测定铈量 Magnesium and its alloys--Determination of cerium content--Tribromoarsenazo spectrophotometric method
镁及镁合金化学分析方法 邻二氮杂菲分光光度法测定铁量 Magnesium and its alloys--Determination of iron content--Orthophenanthroline spectrophotometric method
镁及镁合金化学分析方法 钼蓝分光光度法测定硅量 Magnesium and its alloys--Determination of silicon content--Molybdenum blue spectrophotometric method
镁及镁合金化学分析方法 依来铬氰蓝R分光光度法测定铍量 Magnesium and its alloys--Determination of beryllium content--Solochrome cyanine R spectrophotometric method
镁及镁合金化学分析方法 2,9-二甲基-1,10- 二氮杂菲分光光度法测定铜量 Magnesium and its alloys--Determination of copper content--2,9-dimethyl-1,10-phenanthroline spectrophotometric method
镁及镁合金化学分析方法 丁二酮肟分光光度法测定镍量 Magnesium and its alloys--Determination of nickel content--Dimethylglyoxime spectrophotometric method
镁及镁合金化学分析方法 火焰原子吸收光谱法测定锌量 Magnesium and its alloys--Determination of zinc content--Flame atomic absorption spectrometric method
实验室用标准测温锥 Pyrometric reference cones for laboratory use
工程机械辐射噪声测量的通用方法 General method for measurement of airborne noise emitted by construction machinery and equipment
振动与冲击传感器的校准方法 基本概念 Methods for the calibration of vibration and shock pick-ups--Basic concepts
振动与冲击传感器的校准方法 激光干涉法振动绝对校准 (一次校准) Methods for the calibration of vibration and shock pick-ups--Primary vibration calibration by laser interferometry
振动与冲击传感器的校准方法 正弦激励比较法校准 (二次校准) Methods for the calibration of vibration and shock pick-ups--Comparison(secondary vibration)calibration by sinusoidal excitation
振动与冲击传感器的校准方法 磁灵敏度测试 Methods for the calibration of vibration and shock pick-ups--Testing of magnetic field sensitivity
振动与冲击传感器的校准方法 安装力矩灵敏度测试 Methods for the calibration of vibration and shock pick-ups--Testing of mounting torque sensitivity
振动与冲击传感器的校准方法 基座应变灵敏度测试 Methods for the calibration of vibration and shock pick-ups--Testing of base strain sensitivity
振动与冲击传感器的校准方法 相位比较法振动校准 Methods for the calibration of vibration and shock pick-ups--Primary vibration calibration by comparison of phase angles
振动与冲击传感器的校准方法 横向振动灵敏度测试 Methods for the calibration of vibration and shock pick-ups--Testing of transverse vibration sensitivity
振动与冲击传感器的校准方法 横向冲击灵敏度测试 Methods for the calibration of vibration and shock pick-ups--Testing of transverse shock sensitivity
振动与冲击传感器的校准方法 冲击二次校准 Methods for the calibration of vibration and shock pick-ups--Secondary shock calibration
振动与冲击传感器的校准方法 安装在钢块上的无阻尼加速度计共振频率测试 Methods for calibration of vibration and shock pick-ups--Resonance frequency testing of undamped accelerometers on a steel block
振动与冲击传感器的校准方法 光切割法冲击校准(一次校准) Methods for calibration of vibration and shock pick-ups--Primary shock calibration by light cutting
振动与冲击传感器的校准方法 离心机法一次校准 Methods for the calibration of vibration and shock pick-ups--Primary calibration by centrifuge
振动与冲击传感器的校准方法 瞬变温度灵敏度测试法 Methods for calibration of vibration and shock pick-ups--Testing of transient temperature sensitivity
振动与冲击传感器的校准方法 温度响应比较测试法 Methods for calibration of vibration and shock pick-upe--Testing of temperature response by comparison
振动与冲击传感器的校准方法 声灵敏度测试 Methods for the calibration of vibration and shock pick-ups--Testing of acoustic sensitivity
对振动烈度测量仪的要求 Requirements for instruments for measuring vibration severity
交流电量转换为模拟量或数字信号的电测量变送器 Electrical measuring transducers for converting a.c.electrical quantities to analogue or digital singals
地面车辆机械振动测量数据的表述方法 Mechanical vibrations--Land vehicles-Method for reporting measured data
振动与冲击测量 描述惯性式传感器特性的规定 Shock and vibration measurements--Characteristics to be specified for seismic pick-ups
在开磁路中测量磁性材料矫顽力的方法 Methods of measurement of the coercivity of magnetic materials in an open magnetic circuit
铸造高锰钢金相 Metallographs for high manganese cast steel
光学仪器术语 Optical instruments--Vocabulary
浮筒式液位仪表 Displacement type level instruments
数字仪表基本参数系列 Basic parameter series of digital instruments
半导体管特性图示仪通用技术条件 General specification for semiconductor device curve tracers
半导体管特性图示仪测试方法 Test methods for semiconductor device curve tracers
数字多用表通用技术条件 Generic specification for digital multimeters
氦质谱检漏仪 Helium mass spectrometer leak detector
电离辐射密度计 Density meters utilizing ionizing radiation
仪器仪表基本术语 Instruments--Vocabulary--Basic terms
电阻应变计 Resistance strain gauge
辐射防护用的能量为8keV - 1.3MeV X和γ参考辐射的剂量测量 Dosimetry of X and γ reference radiations for radiation protection over the energy range from 8 keV to 1.3 MeV
辐射防护用固定式X、γ辐射剂量率仪、报警装置和监测仪 Installed X or gamma radiation doserate meters, warning assemblies and monitors for use in radiation protection
校准辐射防护用的中子测量仪表并确定其能量响应的中子参考辐射 Neutron reference radiations for calibrating neutron- measuring devices used for radiation protection purpo ses and for determining their response as a function of neutron energy
DDZ-Ⅲ系列电动单元组合仪表 电流转换器 DDZ-Ⅲ series process electronic control system--Gurrent converter
DDZ-Ⅲ系列电动单元组合仪表 阻抗转换器 DDZ-Ⅲ series process electronic control system--Impedance converter
DDZ-Ⅲ系列电动单元组合仪表 记录仪 DDZ-Ⅲ series process electronic control system--Recording instrument
DDZ-Ⅲ系列电动单元组合仪表 积算器 DDZ-Ⅲ series process electronic control system--Integrating instrument
DDZ-Ⅲ系列电动单元组合仪表 比值给定器 DDZ-Ⅲ series process electronic control system--Ratio setter
DDZ-Ⅲ系列电动单元组合仪表 报警给定器 DDZ-Ⅲ series process electronic control system--Alarm setter
DDZ-Ⅲ系列电动单元组合仪表 安全栅 DDZ-Ⅲ series process electronic control system--Safety barrier
DDZ-Ⅲ系列电动单元组合仪表 信号选择器 DDZ-Ⅲ series process electronic control system--Signal selector
DDZ-Ⅲ系列电动单元组合仪表 信号限制器 DDZ-Ⅲ series process electronic control system--Signal limiter
DDZ-Ⅲ系列电动单元组合仪表 Q型操作器 DDZ-Ⅲ series process electronic control system--Q antomatic/manual station
DDZ-Ⅲ系列电动单元组合仪表 电源箱 DDZ-Ⅲ series process electronic control system--Stabilizey voltage supply box
气体分析 校准用混合气体的制备 压力法 Gas analysis--Preparation of calibration gas mixtures--Manometric method
光纤色散测试仪技术条件 Specifications for optical fiber chromatic dispersion measuring set
双折射晶体和偏振器件测试规范 Measurement specification for birefractance crystal and polarizer
冲击台的特性描述 Characteristics description for shock testing machines
机械振动与冲击对建筑物振动影响的测量和评价基本方法及使用导则 Mechanical vibration and shock--Measurement and evaluation of vibration effects on buildings--Guidelines for the use of basic standard methods
振动与冲击对室内振敏设备影响的测量与数据呈报方法 Vibration and shock sensitive equipment--Methods of measurement and reporting data of vibration and shock effects in buildings
盒式助听器总技术条件 General specification for pocket hearing aids
电子衡器安全要求 Safety requirements for electronic weighing instruments
电子衡器通用技术条件 General specification for electronic weighing instruments
衡器术语 Terminology of weighing instrument
计时学术语 第二部分: 商业技术用定义 Horological vocabulary--Part 2: Technico-commercial definitions
声学 关于空气噪声的测量及其对人影响的评价的标准的指南 Acoustics--Guide to standards on the measurement of airborne acoustical noise and evaluation of its effects on human beings
短程光电测距仪 Short range electro-optic distance-measuring instrument
辐射防护用便携式中子周围剂量当量率仪 Portable neutron ambient dose equivalent ratemeters for use in radiation protection
χ、γ辐射个人报警仪 Personal warning devices for X and gamma radiation
电容液位计 Electrical capacitance level meter
声学 机动车辆定置噪声测量方法 Acoustics--Measurement of noise emitted by stationary road vehicles
声学 噪声源声功率级的测定 使用基础标准与制订噪声测试规范的准则 Acoustics--Determination of sound power levels of noise sources--Guide lines for the use of basic standards and for the preparation of noise test codes
声学 标准超声功率源 Acoustics--Standard ultrasonic power source
声学 水声材料样品插入损失和回声降低的测量方法 Acoustics--Measurement method of insertion loss and echo reduction for the underwater acoustical material sample
机械振动与冲击 加速度计的机械安装 Mechanical vibration and shock--Mechanical mounting of accelerometers
传感器图用图形符号 Graphical symbols for transducers diagrams
机械计数器 Mechanical counter
木制件表面粗糙度 比较样块 Roughness comparison specimens for wooden pieces
变化量的符号和单位 Symbols and units of variant quantities
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第一部分: 概述与定义 Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 1: General considerations and definitions
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第二部分: 单台机器标牌值的确定和检验方法 Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 2: Methods for stated values for individual machines
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第三部分: 成批机器标牌值的确定和检验简易(过渡)法 Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 3: Simple (transition) method for determining and verifying labelled values for batches of machines
声学 确定和检验机器设备规定的噪声辐射值的统计学方法 第四部分: 成批机器标牌值的确定和检验方法 Acoustics--Statistical methods for determining and verifying stated noise emission values of machinery and equipment--Part 4: Methods for stated values for batches of machines
声学 机器和设备噪声发射值的标示和验证 Acoustics--Declaration and verification of noise emission values of machinery and equipment
环境地表γ辐射剂量率测定规范 Norm for the measurement of environmental terrestrial gamma-radiation dose rate
安全色光通用规则 General rules of coloured light for safety
人体手传振动的测量与评价方法 Methods for the measurement and the assessment of human exposure to hand-transmitted vibration
工作直接日射表的校准方法 Calibration of field pyrheliometers
地下铁道电动车组司机室、客室噪声限值 Noise limits inside driver's cabs and passenger compartments of subway powered car train-sets
地下铁道电动车组司机室、客室内部噪声测量 Measurement of noise inside driver's cabs and passenger compartments of subway powered car train-sets
电子数显卡尺 Calipers with electronic digital display
直流数字电压表及直流模数变换器 Digital electronic d.c.voltmeters and d.c.electronic analogue-to-digital convertors
电子探针定量分析方法通则 General guide for EPMA quantitative analysis
电子探针分析仪的检测方法 Method for testing EPMA instrument
频率计数器通用技术条件 Generic specification for frequency counters
频率计数器测试方法 Measuring methods for frequency counters
振动与冲击隔离器性能测试方法 Vibration and shock isolators measuring method for its characteristics
声校准器 Sound calibrators
室外照明测量方法 Measurement methods for exterior lighting
玻璃的电子探针定量分析方法 Quantitative analysis method of electron probe on glasses
稀土氧化物的电子探针定量分析方法 Standard method for quantitative electorn probe microanalysis of ree oxides
硫化物矿物的电子探针定量分析方法 Standard method for electron probe microanalysis of sulfide minerals
碳钢和低合金钢中碳的电子探针的定量分析方法 灵敏度曲线法(检量线法) Electron probe quantitative analysis method of carbon in carbon steel and low alloy steel--Sensitivity curve method (detection limit method)
超声仿人体组织材料声学特性的测量方法 Methods of measuring the acoustic characteristics of ultrasonically tissue-mimicking materials
无功电度表 Reactive energy meters
0.5、1和2级交流有功电度表 Class 0.5, 1 and 2 alternating current watthour meters
复费率(分时)电度表 Multi-rate(time-of-use)watthour meter
数字存储示波器通用技术条件和测试方法 General specification and test method for digital storage oscilloscopes
曲轴轴系扭转振动的测量与评定方法 Torsional vibration of crankshaft systems--Measurement and evaluation method
三相交流系统短路电流计算 Short-circuit current calculation in three-phase a.c.systems
声学 高频水听器校准 Acoustics--Calibration of high frequency hydrophone
表面缺陷 术语 Surface defect terms
低、中水平放射性废物近地表处置场环境辐射监测的一般要求 General requirements for environmental radiation monitoring around near surface disposal site of low-intermediate level radioactive solid waste
个人声暴露计技术要求 Specifications for personal sound exposure meters
耳声阻抗/导纳的测定仪器 Instruments for the measurement of aural acoustic impedance/admittance
水听器相位一致性测量方法 Measurement method of hydrophone phase consistency
声学 测听方法 第2部分:用纯音及窄带测试信号的声场测听 Acoustics--Audiometric test methods--Part 2: Sound field audiometry with pure tone and narrow-band test signals
声学 插入式耳机纯音基准等效阈声压级 Acoustics--Reference equivalent threshold sound pressure levels for pure tones and insert earphones
声学 测听方法 纯音气导和骨导听阈基本测听法 Acoustics--Audiometric test methods--Basic pure tone air and bone conduction threshold audiometry
声学 声强法测定噪声源的声功率级 第1部分: 离散点上的测量 Acoustics--Determination of sound power levels of noise sources using sound intensity--Part 1: Measurement at discrete points
声学 声强法测定噪声源的声功率级 第2部分:扫描测量 Acoustics--Determination of sound power levels of noise sources using sound intensity--Part 2: Measurement by scanning
声学 管道消声器无气流状态下插入损失测量 实验室简易法 Acoustics--Measurement of insertion loss of ducted silencers without flow--Laboretory survey method
声学 声学材料阻尼性能的弯曲共振测试方法 Acoustics--Flexural resonance testing method for damping properties of acoustical materials
声学 医用体外压力脉冲碎石机声场特性及其测量 Acoustics--Characteristics and measurements of field of pressure pulse lithotripters
条式和框式水平仪 Bar form and square levels
光学和光学仪器 环境要求 总则、定义、气候带及其参数 Optics and optical instruments--Environmental requirements--General information, definitions, climatic zones and their parameters
辐射加工剂量测量不确定度评估导则 Standard guide for estimating uncertainties in dosimetry for radiation processing
辐射加工剂量学校准实验室的能力要求 The requirements for the competence of a radiation processing dosimetry calibration laboratory
声学 声压法测定噪声源声功率级 使用标准声源简易法 Acoustics--Determination of sound power levels of noise sources using sound pressure--Survey method using a reference sound source
声学 振速法测定噪声功率级 用于封闭机器的测量 Acoustics--Determination of sound power levels of noise sources using vibration velocity--Measurement for seal machinery
声学 在0.5~15MHz频率范围内的超声场特性及其测量水听器 Acoustics--Measurement and characterisation of ultrasonic fields in the frequency range 0.5MHz to 15MHz--Hydrophone method
微米级长度的扫描电镜测量方法 Micron grade length measurement by SEM
微波炉在1GHz以上的辅射干扰测量方法 Methods of measurement of radiated interference from microwave ovens for frequencies above 1GHz
辅射加工用丙氨酸-EPR剂量测量系统 Alanine--EPR dosimetry system for radiation processing
辐射加工剂量测量系统的选择和校准导则 Standard guide for selection and calihratioon of dosimetry systems for radiation processing
形状和位置公差 最大实体要求、最小实体要求和可逆要求 Geometrical tolerancing--Maximum material requirement,least material requirement and reciprocity requirement
无损检测用黑光源(UV-A)辐射的测量 Measurement of UV-A radiation (black light) used in non-destructive testing
α粒子发射率的测量大面积正比计数管法 Measurement of emission rate of α particle--Method for large area proportional counter
热电偶材料试验方法 第一部分:贵金属热电偶丝热电动势测量方法 Standard test methods for thermocouple materials--Part 1: Methods for measuring the thermoelectric force of noble metal thermocouple wires
热电偶材料试验方法 第二部分:廉金属热电偶丝热电动势测量方法 Standard test methods for thermocouple materials--Part 2: Methods for measuring the thermoelectric force of base metal thermocouple wires
表面波纹度 词汇 Surface waviness terms
治疗级剂量监测用热释光测量系统 Thermoluminescence dosimeter system for radiotherapy level monitoring
热电偶 第1部分:分度表 Thermocouples--Part 1: Reference tables
热电偶 第2部分:允差 Thermocouples--Part 2: Tolerances
坐标计量学 第2部分:坐标测量机的性能评定 Coordinate metrology Part 2: Performance assessment of coordinate measuring machines
晶体折射率的试验方法 Method for testing refractive index of crystals
低温下晶体透射率的试验方法 Method for testing cryogenic transmissivity of crystals
形状和位置公差非刚性零件注法 Geometrical tolerancing indication of non-rigid parts
声学 农林拖拉机和机械操作者位置处噪声的测量 简易法 Acoustics--Tractors and machinery for agriculture and forestry--Measurement of noise at the operator's position--Survey method
几何量测量器具术语 基本术语 Glossary of terms used in dimensional measuring instruments--General terms
几何量测量器具术语 产品术语 Glossary of terms used in dimensional measuring instruments--Product terms
1和2级静止式交流有功电度表 Alternating current static watt-hour meters for active energy (classes 1 and 2)
声学 户外声传播衰减 第1部分: 大气声吸收的计算 Acoustics--Attenuation of sound during propagation outdoors--Part 1: Calculation of the absorption of sound by the atmosphere
声学 户外声传播的衰减 第2部分: 一般计算方法 Acoustics--Attenuation of sound during propagation outdoors Part 2: General method of calculation
声学 机器和设备发射的噪声测定工作位置和其它指定位置发射声压级的基础标准使用导则 Acoustics--Noise emitted by machinery and equipment--Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
声学 机器和设备发射的噪声工作位置和其他指定位置发射声压级的测量 一个反射面上方近似自由场的工程法 Acoustics--Noise emitted by machinery and equipment--Measurement of emission sound pressure levels at a work station and at other specified positions--Engineering method in an essentially free field over a reflecting plane
声学 机器和设备发射的噪声工作位置和其他指定位置发射声压级的测量 现场简易法 Acoustics--Noise emitted by machinery and equipment--Measurement of emission sound pressure levels at a work station and at other specified positions--Survey method in situ
声学 机器和设备发射的噪声 由声功率级确定工作位置和其它指定位置的发射声压级 Acoustics--Noise emitted by machinery and equipment Determination of emission sound pressure level at a workstation and at other specified position from the sound powerlevel
声学 机器和设备发射的噪声工作位置和其他指定位置发射声压级的测量 环境修正法 Acoustics--Noise emitted by machinery and equipment--Measurement of emission sound pressure levels at a work station and at other specified positions--Method requiring environmental corrections
声学 水听器加速度灵敏度校准方法 Acoustics--Calibration method of hydrophone acceleration sensitivity
声学 100kHz以下超声压电换能器的特性和测量 Acoustics--Characteristics and measurements of ultrasonic piezoelectric transducers up to 100kHz
光学和光学仪器 焦度计 Optics and optical instruments--Focimeters
辐射防护用的中子测量仪表的校准及其响应的确定方法 Procedures for calibrating and determining the response of neutron measuring devices used for radiation protection purposes
交流电度表符号 Symbols for alternating-current electricity meters
1和2级直接接入静止式交流有功电度表验收检验 Acceptance inspection for direct connected alternating current static watt-hour meters for active energy (classes 1 and 2)
可程控测量设备标准数字接口的标准代码、格式、协议和公共命令 Standard codes,formats,protocals common commands for use with standard digital interface for programmable instrumentation
封闭管道中流体流量的测量 术语和符号 Measurement of fluid flow in closed conduits--Vocabulary and symbols
封闭管道中液体流量的测量 称重法 Measurement of liquid flow in closed conduits--Weighing method
用称重法测量封闭管道中的液体流量 装置的检验程序 第1部分: 静态称重系统 Measurement of liquid flow in closed conduits by weighing method--Procedures for checking installations Part 1: Static weighing systems
工业过程控制系统用变送器 第1部分: 性能评定方法 Transmitters for use in industrial-process control systems Part 1: Methods of evaluating the performance
工业过程控制系统用变送器 第2部分: 检查和例行试验导则 Transmitters for use in industrial-process control systems--Part 2: Guidance for inspection and routine testing
镍铬硅 镍硅镁热电偶丝 Nickel-Chromium-Silicon/Nickel-Silicon-Magnesium thermocouple wires
白度的表示方法 Methods of whiteness specification
形状和位置公差 延伸公差带及其表示法 Tolerancing of orientation and location--Projected tolerance zone
阻尼材料 复模量图示法 Damping materials--Graphical presentation of the complex modulus
形状和位置公差 基准和基准体系 Geometrical tolerancing--Datums and datum system
形状和位置公差 轮廓的尺寸和公差注法 Geometrical tolerancing--Tolerancing of profile
电测量仪器 X-t记录仪 第1部分:定义和要求 Electrical measuring instruments--X-t recorders--Part 1: Definitions and requirements
电测量仪器 X-t记录仪 第2部分: 推荐的附加试验方法 Electrical measuring instruments--X-t recorders--Part 2: Recommended additional test methods
2和3级静止式交流无功电度表 Alternating current static var-hour meters for reactive energy (classes 2 and 3)
0.2S和0.5S级静止式交流有功电度表 Alternating current static watt-hour meters for active energy (classes 0.2S and 0.5S)
费率和负荷控制用电子式纹波控制接收机 Electronic ripple control receiver for tariff and load control
声学 1 - 10MHz频率范围内橡胶和塑料纵波声速与衰减系数的测量方法 Acoustics--Methods for measuring the longitudinal sound speed and attenuation coefficient of rubbers and plastics in the frequency range 1MHz to 10MHz
以噪声污染为主的工业企业卫生防护距离标准 Health protection zone standards for industrial enterprises by noise
城镇人工煤气主管道流量测量 第1部分: 采用标准孔板节流装置的方法 Flow measurement of city manufactured gas in main pipes Part 1: Method using standard orifice plate throttling device
交流1000V和直流1500V以下低压配电系统电气安全--防护检测的试验、测量或监控设备 第1部分:通用要求 Electrical safty in low voltage distribution systems up to 1000V a.c.and 1500V d.c.--equipment for testing,measuring or monitoring of protective measuring Part 1: Genaral requirements
阻尼材料 阻尼性能测试方法 Damping materials Test method for damping properties
声学 信息技术设备和通信设备空气噪声的测量 Acoustics--Measurement of airborne noise emitted by information technology and telecommunications equipment
振动台选择指南 Guidance for selection of vibration generator system
铠装热电偶电缆及铠装热电偶 Mineral insulated thermocouple cables and thermocouples
传感器主要静态性能指标计算方法 Methods for calculating the main static performance specifications of transducers
IC卡预付费售电系统 第1部分: 总则 Pre-payment vending system using integrated circuit(s)cards with contacts Part 1: General principles
IC卡预付费售电系统 第2部分: IC卡及其管理 Pre-payment vending system using integrated circuit(s)cards with contacts Part 2: IC card and its management
IC卡预付费售电系统 第3部分: 预付费电度表 Pre-payment vending system using integrated circuit(s)cards with contacts Part 3: Pre-payment electricity meters
高电压试验技术 第五部分 测量球隙 High voltage test techniques--Part 5:Sphere-gaps for voltage measurment
黑色金属硬度及强度换算值 Conversion of hardness and strength for ferrous metal
电工电子产品环境试验 第二部分: 试验方法 太阳辐射试验导则 Environmental testing for electric and electronic products--Part 2: Test methods--Guidance for solar radiation testing
电工电子产品环境试验 第1部分: 总则 Environmental testing for electric and electronic products-Part 1: General and guidance
电工电子产品环境试验 术语 Environmental testing for electric and electronic products--Terms and definitions
电工电子产品环境试验 第2部分: 试验方法 试验A: 低温 Environmental testing for electric and electronic products Part 2: Test methods Tests A: Cold
电工电子产品环境试验 第2部分: 试验方法 试验B: 高温 Environmental testing for electric and electronic products Part 2: Test methods Tests B: Dry heat
电工电子产品基本环境试验规程 试验Ca:恒定湿热试验方法 Basic environmental testing procedures for electric and electronic products--Test Ca: Damp heat, steady state
电工电子产品基本环境试验规程 试验Db: 交变湿热试验方法 Basic environmental testing procedures for electric and electronic products--Test Db: Damp heat, cyclic
电工电子产品环境试验 第二部分:试验方法 试验Ea和导则: 冲击 Environmental testing for electric and electronic products--Part 2: Test methods--Test Ea and guidance: Shock
电工电子产品环境试验 第二部分: 试验方法 试验Eb和导则: 碰撞 Environmental testing for electric and electronic products--Part 2: Test methods--Test Eb and guidance: Bump
电工电子产品环境试验 第二部分: 试验方法 试验Ec和导则: 倾跌与翻倒 (主要用于设备型样品) Environmental testing for electric and electronic products--Test Ec and quidance: Drop and topple (Primarily for equipment-type specimens)
电工电子产品环境试验 第二部分: 试验方法 试验Ed: 自由跌落 Environmental testing for electric and electronic products--Parts 2: Test methods--Test Ed: Free fall
电工电子产品环境试验 第2部分: 试验方法 试验Cb: 设备用恒定湿热 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment
电工电子产品环境试验 第二部分: 试验方法 试验Fc和导则: 振动(正弦) Environmental testing for electric and electronic products--Part 2: Test methods--Test Fc and guidance: Vibration (Sinusoidal)
电工电子产品环境试验 第2部分: 试验方法 试验Fd: 宽频带随机振动--一般要求 Environmental testing for electric and electronic products Part 2: Test methods Test Fd: Random vibration wide band--General requirements
电工电子产品环境试验 第2部分: 试验方法 试验Fda: 宽频带随机振动--高再现性 Environmental testing for electric and electronic products Part 2: Test methods Test Fda: Random vibration wide band--Reproducibility high
电工电子产品环境试验 第2部分: 试验方法 试验Fdb: 宽频带随机振动 中再现性 Environmental testing for electric and electronic products Part 2: Test methods Test Fdb: Random vibration wide band--Reproducibility medium
电工电子产品环境试验 第2部分: 试验方法 试验Fdc: 宽频带随机振动 低再现性 Environmental testing for electric and electronic products Part 2: Test methods Test Fdc: Random vibration wide band--Reproducibility low
电工电子产品环境试验 第二部分: 试验方法 试验Ga和导则: 稳态加速度 Environmental testing for electric and electronic products--Part 2: Test methods--Test Ga and guidance: Acceleration, steady state
电工电子产品环境试验 第2部分: 试验方法 试验J和导则: 长霉 Environmental testing for electric and electronic products-Part 2: Tests--Test J and guidance: Mould growth
电工电子产品基本环境试验规程 试验Ka: 盐雾试验方法 Basic environmental testing procedures for electric and electronic products--Test Ka: Salt mist
电工电子产品环境试验第二部分: 试验--试验Kb:盐雾, 交变(氯化钠溶液) Environmental testing for electric and electronic products--Part 2: Tests--Test Kb: Salt mist,cyclic (sodium chloride solution)
电工电子产品基本环境试验规程 试验Kc: 接触点和连接件的二氧化硫试验方法 Electric and electronic products--Basic environmental test regulations for electricians--Test Kc: The sul- phur dioxide method at the point of contact and the connecting element
电工电子产品基本环境试验规程 试验Kd: 接触点和连接件的硫化氢试验方法 Electric and electronic products--Basic environmental test regulations for electricians--Test Kd:The hydrogen sulfide method at the point of contact and the connecting element
电工电子产品基本环境试验规程 试验 M: 低气压试验方法 Basic environmental testing procedures for electric and electronic products - Test M: Low air pressure
电工电子产品基本环境试验规程 试验N:温度变化试验方法 Basic environmental testing procedures for electric and electronic products--Test N: change of tempera ture
电工电子产品环境试验 试验Q:密封 Environmental testing for electric and electronic products--Test Q: Sealing
电工电子产品环境试验 第二部分: 试验方法 试验Sa: 模拟地面上的太阳辐射 Environmental testing for electric and electronic products--Part 2: Test methods--Test Sa: Simulated solar radiation at ground level
电工电子产品基本环境试验规程 试验Z/AM: 低温/低气压综合试验 Basic environmental testing procedures for electric and electronic products - Test Z/AM: Combined cold/low air pressure tests
电工电子产品基本环境试验规程 试验Z/BM: 高温/低气压综合试验 Basic environmental testing procedures for electric and electronic products - Test Z/BM: Combined dry heat /low air pressure tests
电工电子产品基本环境试验规程 试验Z/AMD:低温/ 低气压 /湿热连续综合试验方法 Electric and electronic products--Basic environmental test regulations for electricians -- Test Z/AMD: The successive integrated low temperature/low atmospheric pressure/damp-heat mehtod
电工电子产品基本环境试验规程 试验T:锡焊试验方法 Basic environmental testing procedures for electric and electronic products--Test T: soldering
电工电子产品环境试验 第2部分: 试验方法 试验U:引出端及整体安装件强度 Environmental testing for electric and electronic products-Part 2:Test methods-Test U:Robustness of terminations and integral mounting devices
电工电子产品环境试验 第2部分: 试验方法 试验XA和导则:在清洗剂中浸渍 Environmental testing for electric and electronic products-Part 2: Test methods-Test XA and guidance:Immersion in cleaning solvents
电工电子产品基本环境试验规程 倾斜和摇摆试验方法 Basic environmental testing procedures for electric and electronic products--Test: inclinations and motions
电工电子产品基本环境试验规程 润湿称量法可焊性试验方法 Basic environmental testing procedures for electric and electronic products--Solderability testing by the wetting balance method
电工电子产品基本环境试验规程 试验Kca:高浓度二氧化硫试验方法 Basic environmental testing procedures for electric and electronic products - Test Kca: High consistence sulphur dioxide test
电工电子产品基本环境试验规程 试验Z/AD: 温度/ 湿度组合循环试验方法 Basic environmental testing procedures for electric and electronic products--Test Z/AD: Composite temperature/humidity cyclic test
电工电子产品基本环境试验规程 试验Z/Afc:散热和非散热试验样品的低温/ 振动(正弦)综合试验方法 Basic environmental testing procedures for electric and electronic products--Test Z/Afc: Combined low temperature/vibation (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
电工电子产品基本环境试验规程 试验Z/BFc:散热和非散热样品的高温/ 振动(正弦)综合试验方法 Basic environmental testing procedures for electric and electronic products--Test Z/BFc: Combined high temperature/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens
电工电子产品基本环境试验规程 试验 L: 砂尘试验方法 Basic environmental testing procedures for electric and electronic products?Test L: Dust and sand
电工电子产品基本环境试验规程 试验 R: 水试验方法 Basic environmental test procedures for electric and electronic products?Test R: Water test method
电工电子产品基本环境试验规程 试验Ee: 弹跳试验方法 Basic environmental testing procedures for electric and electronic products - Test Ee: Bounce
电工电子产品环境试验 第2部分: 试验方法 试验Cx:未饱和高压蒸汽恒定湿热 Environmental test for electric and electronic products--Part 2:Test method Test Cx: Damp heat, steady state(unsaturated pressurized vapour)
电工电子产品基本环境试验规程 风压试验方法 Basic environmental testing procedures for electric and electronic products--Wind pressure
电工电子产品环境试验 低温/低气压/振动(正弦)综合试验方法 Basic environmental testing procedures for electric and electronic products--Combined low temperature/low air pressure/vibration(sinusoidal)test
电工电子产品环境试验 第二部分: 试验方法 元件、设备和其他产品在冲击(Ea) 、碰撞(Eb) 、振动(Fc和Fb)和稳态加速度(Ca)等动力学试验中的安装要求和导则 Environmental testing for electric and electronic products--Part 2: Test methods--Mounting of components, equipment and other articles for dynamic tests including shock(Ea), bump(Eb), vibration(Fc and Fd) and steady-state acceleration(Ca) and guidanc
电工电子产品环境试验 第二部分: 试验方法 试验Eg: 撞击 弹簧锤 Environmental testing for electric and electronic products--Part 2: Test method--Test Eg: Impact, spring hammer
电工电子产品环境试验 第2部分:试验方法 试验Z/ABDM:气候顺序 Environmental testing for electric and electronic products-Part 2: Test methods-Test Z/ABDM: Climatic sequence
电工电子产品环境试验 第2部分:试验方法 试验Ef:撞击 摆锤 Environmental testing for electric and electronic products--Part 2: Tests method-Test Ef: Impact,pendulum hammer
电工电子产品环境试验 第2部分: 试验方法 试验Fg: 声振 Environmental testing for electric and electronic products Part 2: Test methods Test Fg: Vibration, acoustically induced
电工电子产品环境试验 第2部分: 试验方法 试验Ff: 振动--时间历程法 Environmental testing for electric and electronic products Part 2: Test methods Test Ff:Vibration--Time-history method
电工电子产品环境试验 第2部分: 试验方法 试验Fe: 振动--正弦拍频法 Environmental testing for electric and electronic products Part 2: Test methods Test Fe: Vibration--sine-beat method
电工电子产品环境试验 第2部分: 试验方法 试验Cy:恒定湿热主要用于元件的加速试验 Environmental testing for electric and electronic products-Part 2: Tests--Test Cy:Damp heat,steady state,accelerated test primarily intended
电工电子产品环境试验 第2部分: 试验方法 试验Ke: 流动混合气体腐蚀试验 Environmental testing for electric and electronic products Part 2: Test methods--Test Ke: Flowing mixed gas corrosion test
电工电子产品基本环境试验规程 高温低温试验导则 Basic environmental testing procedures for electric and electronic products - Guidance for high temperatureand low temperature tests
电工电子产品基本环境试验规程 湿热试验导则 Basic environmental testing procedures for electric and electronic products--Guidance for damp heat tests
电工电子产品基本环境试验规程 大气腐蚀加速试验的通用导则 Basic environmental testing procedures for electric and electronic products--General guidance of accelerated testing for atmospheric corrosion
电工电子产品基本环境试验规程 接触点和连接件的二氧化硫试验导则 Basic environmental testing procedures for electric and electronic products--Guidance for sulphur dioxide test for contacts and connections
电工电子产品基本环境试验规程 接触点和连接件的硫化氢试验导则 Basic environmental testing procedures for electric and electronic products--Guidance for hydrogen sulphide test for contacts and connections
电工电子产品基本环境试验规程 温度变化试验导则 Electric and electronic products--Basic environmental test regulations for electricians--Guidelines for temperature variation tests
电工电子产品基本环境试验规程 温度/低气压综合试验导则 Basic enviromental testing procedures for electric and electronic products?Guide for combined temperature/low air pressare tests
电工电子产品环境试验 锡焊试验导则 Environmental testing for electric and electronic products--Guidance on soldering test
电工电子产品基本环境试验规程 模拟贮存影响的环境试验导则 Basic environmental testing procedures for electric and electronic products--Guidance for the environmental tests simulating the effects of storage
电工电子产品基本环境试验规程 倾斜和摇摆试验导则 Basic environmental testing procedures for electric and electronic products--Guidance for test simulating inclinations and motions
电工电子产品基本环境试验规程 润湿称量法可焊性试验导则 Basic environmental testing procedures for electric and electronic products--Guidance on solderability testing by the wetting balance method
电工电子产品基本环境试验规程 温度(低温、高温)和振动 (正弦) 综合试验导则 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
电工电子产品基本环境试验规程 水试验导则 Basic environmental test procedures for electric and electronic products - Guidance for water test
电工电子产品环境试验温度(低温、高温)/低气压/振动(正弦)综合试验导则 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature(cold and heat)/low air pressure/vibration (sinusoidal)test
电工电子产品环境试验 第3部分: 试验导则 地震试验方法 Environmental testing for electric and electronic products Part 3: Test guidance Seismic test methods
洛氏硬度计检验磨具硬度的方法 Bonded abrasives hardness measurement by Rockwell tester
试验机通用技术要求 General requirements for testing machines
洛氏硬度计技术条件 Specifications for Rockwell hardness testers
标准洛氏硬度块 Standardized blocks of Rockwell hardness
液压式万能试验机 Hydraulic universal testing machines
液压式压力试验机 Hydraulic compression testing machines
绘制频率特性图和极坐标图的标度和尺寸 Scales and sizes for plotting frequency characteristics and polar diagrams
表面洛氏硬度计技术条件 Specification for Rockwell superficial hardness testers
标准表面洛氏硬度块 Standardized blocks of Rockwell superficial hardness
摆锤式冲击试验机 Pendulum impact testing machines
2.0级交流电度表的验收方法 Acceptance inspection of class 2 alternating current watthour meters
直流电位差计 Direct-current potentiometers
直流电阻分压箱 D.C.resistive volt ratio boxes
标准电池 Standard cells
测量电阻用直流电桥 D.C.bridge for measuring resistance
测量、控制及实验室用电气设备的安全 电工测量和试验用手持电流钳的特殊要求 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for hand-held current clamp for electrical measurement and test
测量、控制及实验室用电气设备的安全 实验室用混合和搅拌设备的特殊要求 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for mixing and stirring
测量、控制及实验室用电气设备的安全 实验室用处理医用材料的蒸压器的特殊要求 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process
测量、控制及实验室用电气设备的安全 电工测量和试验用手持探头的特殊要求 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for hand-held probe assemblies for electrical measurement and test
测量、控制及实验室用电气设备的安全 实验室用材料加热设备的特殊要求 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for the heating of materials
测量、控制及实验室用电气设备的安全 实验室用离心机的特殊要求 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for alboratory centrifuges
电工电子产品环境参数分类及其严酷程度分级 Classification of environmental parameters and their severities of electric and electronic products
电工电子产品自然环境条件 温度和湿度 Environmental conditions appearing in nature of electric and electronic products--Temperature and humidity
电工电子产品自然环境条件 海拔与气压、水深和水压 Environmental conditions for electric and electronic products appearing in nature--Altitude and air pressure, deepness and water pressure
电工电子产品自然环境条件 生物 Environmental conditions for electric and electronic products appearing in nature--Living organisms
电工电子产品自然环境条件 太阳辐射与温度 Environmental conditions appearing in nature for electric and electronic products?Solar radiation and temperature
电工电子产品自然环境条件 降水和风 Environmental conditions appearing in nature of electric and electronic products?Precipitation and wind
电工电子产品自然环境条件 尘、沙、盐雾 Environmental conditions appearing in nature of electric and electronic products--Dust,sand,salt mist
电工电子产品应用环境条件 贮存 Environmental conditions existing in the application of electric and electronic products--Storage
电工电子产品应用环境条件 有气候防护场所固定使用 Environmental conditions existing in the application for electric and electronic products - Stationary use at weather-protected locations
电工电子产品应用环境条件 无气候防护场所固定使用 Environmental conditions existing in the application for electric and electronic products - Stationary use at non-weather-protected locations
电工电子产品应用环境条件 地面车辆使用 Enviromental conditions existing in the application of electric and electronic products--Ground vehicle installations
电工电子产品应用环境条件 船用 Environmental conditions existing in the application of electric and electronic products ship environment
电工电子产品应用环境条件 携带和非固定使用 Environmental conditions existing in the application of electric and electronic products--Portable and non-statonary use
电工电子产品应用环境条件 导言 Environmental conditions existing in the application of electric and electronic products?Introduction
电工电子产品环境试验设备基本参数检定方法 恒加速度试验用离心式试验机 Inspection methods for basic parameters of envirormental testing equipments for electric and electronic products--Centrifugal machines for constant acceleration test
电工电子产品环境试验设备基本参数检定方法 总则 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--General
电工电子产品环境试验设备基本参数检定方法 温度试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Temperature testing equipments
电工电子产品环境试验设备基本参数检定方法 湿热试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Damp heat testing equipments
电工电子产品环境试验设备基本参数检定方法 盐雾试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Salt mist testing equipments
电工电子产品环境试验设备基本参数检定方法 太阳辐射试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Solar radiation testing equipments
电工电子产品环境试验设备基本参数检定方法 高低温低气压试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Combined high and low temperature/low air pressure testing equipments
电工电子产品环境试验设备基本参数检定方法 腐蚀气体试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Corrosive gas testing equipments
电工电子产品环境试验设备基本参数检定方法 振动 (正弦) 试验用机械振动台 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Mechanical vibrating type mechines for vibration (sinusoidal ) test
电工电子产品环境试验设备基本参数检定方法 振动 (正弦) 试验用电动振动台 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Electrodynamic vibrating type machines for vibration (sinusoidal) test
电工电子产品环境试验设备基本参数检定方法 振动 (正弦) 试验用液压振动台 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Hydraulic vibrating type machines for vibration (sinusoidal) test
电工电子产品环境试验设备基本参数检定方法 低温/低气压/湿热综合顺序试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products--Combined sequential cold/low air pressure and damp heat testing equipments
电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 Inspection methods for basic parameters of environmental testing epuipments for electric and electronic products--Composite temperature/humidity cyclic testing equipments
电工电子产品环境试验设备基本参数检定方法 温度/ 振动 (正弦) 综合试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products - Combined temperature/vibration (sinusoidal) testing equipments
电工电子产品环境试验设备基本参数检定方法 水试验设备 Inspection methods for basic parameters of environmental testing equipments for electric and electronic products?Water testing equipments
试验筛与筛分试验 术语 Test sieves and test sieving--Vocabulary
工业用金属丝编织方孔筛网 Industrial woven metal wire cloth (square openning series)
工业用金属筛网和金属丝编织网 网孔尺寸与金属丝直径组合选择指南 通则 Industrial wire screens and woven wire cloth--Guide to the choice of aperture size and wire diameter combinations--Part 1: Generalities
金属丝编织网试验筛 Test sieves of metal wire cloth
金属穿孔板试验筛 Test sieves of perforated metal plate
电成型薄板试验筛 Test sieves of electroformed sheets
试验筛 金属丝编织网、穿孔板和电成型薄板筛孔的基本尺寸 Test sieves--Metal wire cloth, perforated metal plate and electroformed sheet--Nominal sizes of opening
布氏硬度计的检验 Verification of Brinell hardness testers
标准布氏硬度块的标定 Calibration of standardized blocks to be used for Brinell hardness
电子测量仪器 振动试验 Vibration tests for electronic measuring instruments
电子测量仪器 环境试验总纲 Environmental tests program for electronic measuring instruments
电子测量仪器 温度试验 Temperature tests for electronic measuring instruments
电子测量仪器 湿度试验 Humidity tests for electronic measuring instruments
电子测量仪器 冲击试验 Shock tests for electronic measuring instruments
电子测量仪器 运输试验 Transportation tests for electronic measuring instruments
电子测量仪器 基本安全试验 Basic safty tests for electronic measuring instruments
电子测量仪器 电源频率与电压试验 Line frequency and voltage tests for electronic measuring instruments
电工和电子测量设备性能表示 Expression of the performance of electrical and electronic measuring equipment
环境试验用相对湿度查算表 Relative humidity tables for environmental test
固体电介质微波复介电常数的测试方法 微扰法 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method
固体电介质微波复介电常数的测试方法 "开式腔"法 Test method for the complex permittivity of solid dielectric materials at microwave frequencies--" Open cavity" method
设备可靠性试验 推荐的试验条件 室内便携设备 粗模拟 Equipment reliability testing--Preferred test conditions indoor portable equipment--Low degree of simulation
设备可靠性试验 推荐的试验条件 固定使用在有气候防护场所设备 - 精模拟 Equipment reliability testing--Preferred test conditions--Equipment for stationary use in weather protected locations--High degree of simulation
X射线应力测定方法 Residual stress measurement by X-ray
系统可靠性分析技术 失效模式和效应分析(FMEA)程序 Analysis techniques for system reliability--Procedure for failure mode and effects analysis(FMEA)
可靠性预计程序 Reliability prediction procedure
可靠性设计评审 Reliability design reviews
故障树分析程序 Procedure for fault tree analysis
核仪器环境条件与试验方法 Environmental conditions and testing procedures for nuclear instrumentation
平衡机及其仪器仪表用图形符号 Symbols for balancing machines and associated instrumentation
无损检测人员资格鉴定与认证 Qualification and certification for nondestructive testing personnel
筛板筛孔的标记方法 Screen plants--Codification for designating perforations
液压伺服振动试验设备特性的描述方法 Servo-hydraulic test equipment for generating vibration--Method of describing characteristics
湿热试验箱技术条件 Specification for damp heat test chambers
盐雾试验箱技术条件 Specification for salt mist test chambers
长霉试验箱技术条件 Specification for mould growth test chambers
低温试验箱技术条件 Specification for low temperature test chambers
低温/ 低气压试验箱技术条件 Specification for low temperature/low air pressure test chambers
高温/ 低气压试验箱技术条件 Specification for high temperature/low air pressure test chambers
工业用网 网孔 尺寸系列 Wire screens and plate screens for industrial purposes - Nominal size of spertures
板厚<3mm的圆孔和方孔筛板 Round and square perforation plate screens - Thickness of below 3 mm
板厚≥3 mm的圆孔和方孔筛板 Round and square perforation plate screens?Thickness of 3 mm and above
电子元器件环境试验使用导则 Guide to the application to environmental tests to electronic components
接触式超声斜射探伤方法 Ultrasonic angle beam examination by the contact method
接触式超声波脉冲回波法测厚 Measuring thickness by ultrasonic pulse-echo contact method
分析仪器环境试验方法 总则 The method of environmental test for analytical instruments - General
分析仪器环境试验方法 电源频率与电压试验 The method of environmental test for analytical instruments?Line frequency and voltage test
分析仪器环境试验方法 低温试验 The method of environmental test for analytical instruments - Cold test
分析仪器环境试验方法 高温试验 The method of environmental test for analytical instruments?High temperature test
分析仪器环境试验方法 温度变化试验 The method of environmental test for analytical instruments - Change of temperature test
分析仪器环境试验方法 恒定湿度试验 The method of environmental test for analytical instruments - Damp heat, steady state
分析仪器环境试验方法 交变湿热试验 The method of environmental test for analytical instruments - Damp heat, cyclic
分析仪器环境试验方法 振动试验 The method of environmental test for analytical instruments - Vibration test
分析仪器环境试验方法 磁场试验 The method of environmental test for analytical instruments - Magnetic field test
分析仪器环境试验方法 气压试验 The method of environmental test for analytical instruments - Low air pressure test
分析仪器环境试验方法 砂尘试验 The method of environmental test for analytical instruments - Sand and dust content of the air test
分析仪器环境试验方法 长霉试验 The method of environmental test for analytical instruments - Mould growth test
分析仪器环境试验方法 盐雾试验 The method of environmental test for analytical instruments - Salt mist test
分析仪器环境试验方法 低温贮存试验 The method of environmental test for analytical insturments?Cold storage test
分析仪器环境试验方法 高温贮存试验 The method of environmental test for analytical instruments?High temperature storage test
分析仪器环境试验方法 跌落试验 The method of environmental test for analytical instruments - Fall down test
分析仪器环境试验方法 碰撞试验 The method of environmental test for analytical instruments - Pump test
电工电子产品环境条件术语 Terms of environmental conditions for electric and electronic products
光学和光学仪器 环境试验方法 宽带随机振动(中再现性)与高温、低温综合试验 Optics and optical instruments--Environmental test methods--Combined random vibration wideband--Reproducibility medium, in dry heat or cold
光学和光学仪器 环境试验方法 弹跳或恒加速度与高温、低温综合试验 Optics and optical instruments--Environmental test methods--Combined bounce or steady state acceleration,in dry heat or cold
光学和光学仪器 环境试验方法 污染与太阳辐射综合试验 Optics and optical instruments--Environmental test methods--Combined contamination, solar radiation
视觉环境评价方法 A method of evaluating the visual environment
无损检测术语 红外检测 Terminology for nondestructive testing--Infrared testing
太阳摸拟器通用规范 General specification for solar simulator
电机在一般环境条件下使用的湿热试验要求 Requirements of damp-heat testing of electrical machine for service in general environmental condition
机械产品环境参数分类及其严酷程度分级 Classification of environmental parameters and their severities for machinery products
机械产品环境条件 湿热 Environmental condition for machinery products Warm-damp
机械产品环境条件 寒冷 Environmental condition for machinery products--Cold
机械产品环境条件 高海拔 Environmental condition for machinery products--High altitude
机械产品环境条件 海洋 Environmental condition for machinery products--Ocedn
机械产品环境条件 工业腐蚀 Environmental condition for machinery products--Industrial corrosion
机械产品环境条件 矿山 Environmental condition for machinery products--Mine
机械产品环境条件 干热 Environmental condition for machinery products--Dry heat
机械产品环境技术要求 湿热环境用 Environmental technical requirements of machinery products for the warm-damp environments
机械产品环境技术要求 寒冷环境用 Environment technical requirements of machinery products for cold environment
机械产品环境技术要求 高原环境用 Environmental technical requirements of machinery products for plateau environment
机械产品环境技术要求 工业腐蚀环境用 Environmental technical requirements of machinery products for the industrial corrosion environments
机械产品环境技术要求 干热环境用 Environmental technical requirements of machinery products for dry heat environment
机械产品环境技术要求 海洋环境用 Environmental technical requirements of machinery products for ocean environment
机械工业产品用塑料、涂料、橡胶材料人工气候加速试验方法 Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products
量度继电器和保护装置的冲击与碰撞试验 Shock and bump tests on measuring relays and protection equipment
电工产品不同海拔的气候环境条件 Environmental climatic conditions appearing in different higher lands for electrical products
使用冲击试验机测定产品脆值的试验方法 Test methods for mechanical shock fragility of products, using shock machines
红外探测器环境试验方法 Environmental testing methods for infrared detectors
颗粒粒度分析结果的图形表征 Graphical representation of results of particle size analysis
氦泄漏检验 Examination for helium leak detecting
颗粒系统术语 Particle system--Vocabulary
电子式万能试验机 Electronic universal testing machines
电气和电子测量设备随机文件 Electrical and electronic measuring equipment--Documentation
拉力试验机的检验 Verification of tensile testing machines
电液式万能试验机 Electro-hydraulic universal testing machines
高电压试验技术 第一部分: 一般试验要求 Hign voltsge test techniques--Part 1: General test requirements
高电压试验技术 第二部分: 测量系统 High voltage test techniques--Part 2: Measuring systems
无损检测 表面检测的金相复制件技术 Non-destructive testing--Metallographic replica techniques of surface examination
极快速冲击高电压试验技术 第一部分:气体绝缘变电站中陡波前过电压用测量系统 High-voltage testing techniques with very fast impulses Part 1: Measuring systems for very fast front overvoltages generated in gas-insulated substations
紧固件 外螺纹零件的末端 Fasteners--Ends of parts with external thread
普通螺纹收尾、肩距、退刀槽和倒角 Run-outs,undercuts and chamfers for general purpose metric screw threads
沉头方颈螺栓 Flat countersunk square neck bolts
沉头带榫螺栓 Flat countersunk nib bolts
半圆头方颈螺栓 Cup head square neck bolts
半圆头带榫螺栓 Cup head nib bolts
大半圆头方颈螺栓 C级 Cup head square neck bolts with large head--Product grade C
大半圆头带榫螺栓 Cup head nib bolts with large head
小六角头导颈螺栓 Bolts, small hexagon head with fit neck
小六角头螺杆带孔螺栓 Bolts, small hexagon head with hole through the shank
, 小六角头螺杆带孔导颈螺栓 Bolts, small hexagon head with fit neck and hole through the shank
小六角头头部带孔螺栓 Bolts, small hexagon head with holes through the head
小六角头头部带孔导颈螺栓 Bolts, small hexagon head with fit neck and holes through the head
六角头铰制孔用螺栓 A和B级 Hexagon fit bolts--Product grade A and B
六角头螺杆带孔铰制孔用螺栓 A和B级 Hexagon fit bolts with Split pin hole on shank--Product grade A and B
六角头头部带槽螺栓 A和B级 Hexagon bolts with slot on head--Product grade A and B
十字槽凹穴六角头螺栓 Cross recessed hexagon bolts with indentation
六角头螺杆带孔螺栓 A和B级 Hexagon bolts with split pin hole on shank--Product grade A and B
六角头螺杆带孔螺栓 细杆 B级 Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B
六角头螺杆带孔螺栓 细牙 A和B级 Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B
六角头头部带孔螺栓 A和B级 Hexagon bolts with wire holes on head--Product grade A and B
六角头头部带孔螺栓 细杆 B级 Hexagon bolts with wire holes on head--Reduced shank--Product grade B
六角头头部带孔螺栓 细牙 A和B级 Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B
小方头螺栓 B级 Square head bolts with small head--Product grade B
T型槽用螺栓 Bolts for T-Slot
螺栓 技术条件 Bolts--Technical requirements
方螺母 C级 Square nuts--Product grade C
六角螺母C级 Hexagon nuts--Product grade C
六角厚螺母 Hexagon thick nuts
螺母 技术条件 Nuts--Technical requirements
蝶形螺母 Wing nuts
环形螺母 Lifting nuts
开槽圆柱头螺钉 Slotted cheese head screws--Product grade A
开槽盘头螺钉 Slotted pan head screws--Product grade A
开槽沉头螺钉 Slotted countersunk flat head screws(common head style)--Product grade A
开槽半沉头螺钉 Countersunk slotted raised head screws(common head style)--Product grade A
内六角圆柱头螺钉 Hexagon socket head cap screws
内六角平圆头螺钉 Hexagon socket button head screws
内六角沉头螺钉 Hexagon socket countersunk head screws
开槽锥端紧定螺钉 Slotted set screws with cone point
开槽锥端定位螺钉 Slotted set screws with cone point
开槽凹端紧定螺钉 Slotted set screws with cup point
开槽长圆柱端紧定螺钉 Slotted set screws withlong dog point
内六角平端紧定螺钉 Hexagon socket set screws with flat point
内六角锥端紧定螺钉 Hexagon socket set screws with cone point
内六角圆柱端紧定螺钉 Hexagon socket set screws with dog point
内六角凹端紧定螺钉 Hexagon socket set screws with cup point
方头凹端紧定螺钉 Square set screws with cup point
方头长圆柱端紧定螺钉 Square set screws with long dog point
方头短圆柱锥端紧定螺钉 Square set screws with short dog point and cone end
螺钉 技术条件 Screws--Technical requirements
紧固件验收检查、标志与包装 Acceptance inspection,marking and packaging of fasteners
开口销 Split pins
标准型弹簧垫圈 Single coil spring lock washers--Normal type
弹性垫圈技术条件 弹簧垫圈 Specifications for spring washers--Single coil spring lock washers
弹性垫圈技术条件 齿形、锯齿锁紧垫圈 Specifications for spring washers--Toothed lock and serrated lock washers
弹性垫圈技术条件 鞍形、波形弹性垫圈 Specifications for spring washers--Curved and wave spring washers
平垫圈-C级 Plain washers--Product grade C
大垫圈-A和C级 Plain washers--Large series--Product grades A and C
平垫圈-A级 Plain washers--Normal series--Product grade A
平垫圈 倒角型-A级 Plain washers--Chamfered--Normal series--Product grade A
销轴用平垫圈 Plain washers for clevis pins--Product grade A
止动垫圈技术条件 Specification for tab washer
开槽圆头木螺钉 Slotted round head wood screws
开槽沉头木螺钉 Slotted countersink head wood screws
开槽半沉头木螺钉 Slotted raised countersunk head wood screws
六角头木螺钉 Hexagon head wood screws
平头铆钉 Flat head rivets
铆钉技术条件 Specifications for rivet
圆锥销 Taper pins,unhardened
内螺纹圆锥销 Taper pins with internal thread, unhardened
圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins, of unhardened steel and austenitic stainless steel
圆柱销 淬硬钢和马氏体不锈钢 Parallel pins, of hardened steel and martensitic stainless steel(Dowel pins)
内螺纹圆柱销 不淬硬钢和奥氏体不锈钢 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel
内螺纹圆柱销 淬硬钢和马氏体不锈钢 Parallel pins with internal thread, of hardened steel and martensitic stainless steel
销技术条件 Specifications for pins
紧固件 铆钉用通孔 Fasteners--Clearance holes for rivets
紧固件 沉头用沉孔 Fasteners--Countersinks for countersunk head serews
紧固件 圆柱头用沉孔 Fasteners--Counterbores for hexagon socket head serewsand slotted cheese head screws
紧固件 六角头螺栓和六角螺母用沉孔 Fasteners--Counterbores for hexagon bolts and nuts
普通螺纹 基本牙型 General purpose screw threads--Basic concepts and symbols for tooth shapes and tolerance zone
普通螺纹 直径与螺距系列 (直径1~600mm) General purpose screw threads--Diameters and pitches
普通螺纹 基本尺寸 (直径1~600mm) General purpose screw threads--Basic dimensions for diameter from 1 to 600mm
普通螺纹 公差与配合 (直径1~355mm) General purpose screw threads--Tolerances and fits fordiameter from 1 to 355mm
滚动轴承 分类 Rolling bearings--Classification
滚动轴承 代号方法 Rolling bearing--Identification code
滚动轴承 圆锥滚子轴承 外形尺寸方案 Rolling bearings Tapered roller bearings--Boundary dimensions
滚动轴承 推力轴承 外形尺寸总方案 Rolling bearings--Thrust bearings--Boundary dimensions,general plan
滚动轴承 向心轴承 外形尺寸总方案 Rolling bearings--Radial bearings--Boundary dimensions,general plan
滚动轴承 倒角尺寸最大值 Rolling bearings--Chamfer dimension--Maximum values
滚动轴承 深沟球轴承 外形尺寸 Rolling bearings--Deep groove ball bearings--Boundary dimensions
滚动轴承与轴和外壳的配合 Shaft and housing fits for rolling bearings
带毡封圈的单列向心球轴承 结构型式和基本尺寸 Rolling bearings--Single-row radial ball bearings withfelt seals--Types and basic dimensions
滚动轴承 调心球轴承 外形尺寸 Rolling bearings--Self-aligning ball bearings--Boundary dimensions
滚动轴承 圆柱滚子轴承 外形尺寸 Rolling bearings--Cylindrical roller bearings - Boundary dimensions
滚动轴承 双列圆柱滚子轴承 外形尺寸 Rolling bearings--Double row cylindrical roller bearings - Boundary dimensions
双列向心球面滚子轴承 结构型式和基本尺寸 Rolling bearings--Double -row radial spherical roller bearings--Types and basic dimensions
滚动轴承 调心滚子轴承 外形尺寸 Rolling bearings--Self-aligning roller bearings - Boundary dimensions
滚针轴承 结构型式和基本尺寸 Needle roller bearings--Types and basic dimensions
滚动轴承 冲压外圈滚针轴承 外形尺寸 Rolling bearings--Needle roller bearings, drawn cup without inner rings--Boundary dimensions
螺旋滚子轴承 结构型式和基本尺寸 Rolling bearings with helically wound cylindrical rollers--Types and basic dimensions
滚动轴承 角接触球轴承 外形尺寸 Rolling bearings--Angular contact ball bearings--Boundary dimensions
滚动轴承 三点和四点接触球轴承 外形尺寸 Rolling bearings--Three point and four point contact ball bearings--Boundary dimensions
滚动轴承 双列角接触球轴承 外形尺寸 Rolling bearings--Double row angular contact ball bearings--Boundary dimensions
滚动轴承 圆锥滚子轴承 外形尺寸 Rolling bearings--Tapered roller bearings--Boundary dimensions
滚动轴承 双列圆锥滚子轴承 外形尺寸 Rolling bearings--Metric double row tapered roller bearings--Boundary dimensions
滚动轴承 四列圆锥滚子轴承外形尺寸 Rolling bearings--Four row tapered roller bearings--Boundary dimensions
滚动轴承 推力球轴承 外形尺寸 Rolling bearings--Thrust ball bearings--Boundary dimensions
关节轴承 分类 Spherical plain bearings Classification
关节轴承 代号方法 Spherical plain bearings Identification code
关节轴承 配合 Spherical plain bearings - Fits
向心关节轴承 技术条件 Spherical plain radial bearings, joint type--Technical requirements
滚动轴承 外圈上的止动槽和止动环 尺寸和公差 Rolling bearings--Snap ring groove and snap ring on outer ring--Dimensions and tolerances
滚动轴承 向心轴承 公差 Rolling bearings--Radial bearings--Tolerances
滚动轴承 测量和检验的原则及方法 Rolling bearings--Measuring and gauging principles and methods
滚动轴承 通用技术规则 Rolling bearings--General technical regulations
滚动轴承 推力球轴承 公差 Rolling bearings--Thrust ball bearings--Tolerances
滚动轴承 钢球 Rolling bearings - Steel balls
滚动轴承 滚针 Rolling bearings--Needle rollers
开槽平端紧定螺钉 Slotted set screws with flat point
加强半圆头方颈螺栓 Strengthened cap head square neck bolts
活节螺栓 Eye bolts
地脚螺栓 Eyelet bolts
沉头双榫螺栓 Flat countersunk double nib bolts
小半圆头低方颈螺栓 B级 Cup head square neck bolts with small head and short neck--Product grade B
组合式盖形螺母 Acorn nuts
球面六角螺母 Hexagon nuts with raised face
扣紧螺母 Tight nuts
滚花高螺母 Knurled nut with collar
滚花薄螺母 Knurled nuts
小六角特扁细牙螺母 Small hexagon thin nuts-Fine pitch thread
嵌装圆螺母 Insert round nuts
小圆螺母 Small round nuts
圆螺母 Round nuts
端面带孔圆螺母 Round nuts with drilled holes in one face
侧面带孔圆螺母 Round nuts with set pin holes in side
带槽圆螺母 Slotted round nuts
十字槽盘头螺钉 Pan head screws with type H or type Z cross recess--Product grade A
十字槽沉头螺钉 第1部分: 钢4.8 Countersunk flat head screws(common head style)with type H or type Z cross recess--Product grade A--Part 1: Steel of property class 4.8
十字槽沉头螺钉 第2部分: 钢8.8、不锈钢A2-70和有色金属CU2或CU3 Cross recessed countersunk flat head screws(common head style)--Grade A--Part 2: Steel of property class 8.8,stainless steel and non-ferrous metals
十字槽半沉头螺钉 Countersunk raised head screws (common head style) with type H or type Z cross recess--Product grade A
方头倒角端紧定螺钉 Square set screws with chamfered end
十字槽圆柱头螺钉 Cross recessed cheese head screws
十字槽小盘头螺钉 Cross recessed small pan head screws
圆柱头内花键螺钉 Screws,fluted socket head
吊环螺钉 Eyebolts
标牌铆钉 Rivets for name plate
开槽盘头定位螺钉 Slotted pan head set setscrews with dog point
开槽圆柱端定位螺钉 Slotted setscrews with dog point
方头长圆柱球面端紧定螺钉 Square set screws with long dog point and rounded end
开槽圆柱头轴位螺钉 Slotted cheese head screws with shoulder
开槽无头轴位螺钉 Slotted shoulder screws
开槽带孔球面圆柱头螺钉 Slotted capstan screws
开槽大圆柱头螺钉 Slotted large cheese head screws
滚花高头螺钉 Knurled thumb screws
滚花平头螺钉 Knurled screws
滚花小头螺钉 Knurled screws with small head
开槽盘头不脱出螺钉 Slotted pan head screws with waisted shank
六角头不脱出螺钉 Hexagon screws with waisted shank
滚花头不脱出螺钉 Knurled thumb screws with waisted shank
塑料滚花头螺钉 Plastic diamond knurlhead screws
十字槽盘头自攻螺钉 Cross recessed pan head tapping screws
十字槽沉头自攻螺钉 Cross recessed countersunk head tapping screws
十字槽半沉头自攻螺钉 Cross recessed raised countersunk head tapping screws
小垫圈--A级 Plain washers--Small series--Product grade A
球面垫圈 Weshers with ball face
锥面垫圈 Washers with cone face
开口垫圈 Washers with split
工字钢用方斜垫圈 Square taper washers for I section
槽钢用方斜垫圈 Square taper washers for slot section
单耳止动垫圈 Tab washers with long tab
双耳止动垫圈 Tab washers with long tab and wing
外舌止动垫圈 External tab washers
圆螺母用止动垫圈 Tab washers for round nut
轻型弹簧垫圈 Single coil spring lock washers,Light type
鞍形弹性垫圈 Curved spring washers
内齿锁紧垫圈 Lock washers internal teeth
内锯齿锁紧垫圈 Serrated lock washers internal teeth
外齿锁紧垫圈 Lock washers external teeth
外锯齿锁紧垫圈 Serrated lock washers external teeth
半圆头铆钉 (粗制) Round head rivets--Black
小半圆头铆钉 (粗制) Round head rivets with small head--Black
平锥头铆钉 (粗制) Cone head rivets--Black
沉头铆钉 (粗制) Countersunk head rivets--Black
半沉头铆钉 (粗制) Oval countersunk head rivets--Black
半圆头铆钉 Round head rivets
平锥头铆钉 Cone head rivets
沉头铆钉 Countersunk head rivets
半沉头铆钉 Oval countersunk head rivets
扁圆头铆钉 Flat round head rivets
扁平头铆钉 Thin head rivets
扁圆头半空心铆钉 Oval head semi-tubular rivets
120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets
偏平头半空心铆钉 Thin head semi-tubular rivets
空心铆钉 Tubular rivets
开尾圆锥销 Taper pins with split
螺纹圆柱销 Parallel pins with external thread
弹性圆柱销 直槽 重型 Spring-type straight pins--Slotted, heavy duty
弹性圆柱销 直槽 轻型 Spring-type straight pins--Slotted, light duty
弹性圆柱销 卷制 重型 Spring-type straight pins--Coiled, heavy duty
弹性圆柱销 卷制 标准型 Spring-type straight pins--Coiled, standard duty
弹性圆柱销 卷制 轻型 Spring-type straight pins--Coiled, light duty
带孔销 Pins with split pin hole
螺尾锥销 Taper pins with external thread, unhardened
销轴 Clevis pins with head
锥销锁紧挡圈 Lock rings with cone pin
螺钉锁紧挡圈 Lock ring with screw
带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip
轴肩挡圈 Rings for shoulder
I型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),Style 1--Property classes 5,8 and 10
1型非金属嵌件六角锁紧螺母 细牙 Prevailing torque type hexagon nuts(with non-metallic insert),Style 1,with metric fine pitch thread--Property classes 6,8 and 10
螺钉紧固轴端挡圈 Lock rings at the end of shaft with screw
螺栓紧固轴端挡圈 Lock rings at the end of shaft with bolt
孔用弹性挡圈--A型 Circlips for holes--Type A
孔用弹性挡圈--B型 Circlips for hole--Type B
轴用弹性挡圈--A型 Circlips for shaft--Type A
轴用弹性挡圈--B型 Circlips for shaft--Type B
孔用钢丝挡圈 Roundwire snap rings for hole
轴用钢丝挡圈 Roundwire snap rings for shaft
开口挡圈 E rings
双头螺柱 bm=1d Double end studs--bm=1d
双头螺柱 bm=1.25d Double end studs bm=1.25d
双头螺柱 bm=1.5d Double end studs bm=1.5d
双头螺柱 bm=2d Double end studs bm=2d
等长双头螺柱 B级 Double end studs (clamping type)--Product grade B
手工焊用焊接螺柱 Weld studs for manual welding
机动弧焊用焊接螺柱 Weld studs for arc welding
储能焊用焊接螺柱 Weld studs for capacitor discharge welding
钢丝锁圈 Round wire circlips
木螺钉技术条件 Specifications for wood screws
盖形螺母 Acorn nuts
轻型六角自锁螺母 Self-locking nuts,hexagon light
球面六角自锁螺母 Self-locking nuts,hexagon sphere
单耳托板自锁螺母 Self-locking nuts,singlelug, anchor
双耳托板自锁螺母 Self-locking nuts,twolug, anchor
角形托板自锁螺母 Self-locking nuts,angle, anchor
气密单耳托板自锁螺母 Self-locking nuts,singlelug, anchor, sealing,
气密双耳托板自锁螺母 Self-locking nuts,twolug, anchor, sealing
成组游动托板自锁螺母 Self-locking nuts, anchor, floating,Gang channel
游动自锁螺母 Self-locking nuts, floating
单耳托板自锁螺母保护罩 Boots for self-locking nuts, singlelug, anchor
双耳托板自锁螺母保护罩 Boots for self-locking nuts,twolug, anchor
角形托板自锁螺母保护罩 Boots for self-locking nuts,angle, anchor
自锁螺母技术条件 Procurement specification for self-locking nuts
螺钉用十字槽 Cross recesses for screws
十字槽球面中柱头螺钉 Screws,cross recessed,thin raised cheese head
开槽球面圆柱头轴位螺钉 Slotted raised cheese head with shoulder
开槽球面大圆柱头螺钉 Slotted large raised cheese head screws
开槽沉头不脱出螺钉 Slotted countersunk head screws with waisted shank
开槽半沉头不脱出螺钉 Slotted raised countersunk head screws with waisted shank
十字槽圆头木螺钉 Cross recessed round head wood screws
十字槽沉头木螺钉 Cross recessed countersunk head wood screws
十字槽半沉头木螺钉 Cross recessed raised countersunk head wood screws
等长双头螺柱 C级 Double end studs (clamping type)--Product grade C
120°沉头铆钉 120°degree countersunk head rivets
波形弹性垫圈 Wave spring washers
锥形锁紧垫圈 Countersunk external toothed lock washers
锥形锯齿锁紧垫圈 Countersunk serrated external toothed lock washers
挡圈技术条件--弹性挡圈 Specifications for ring - Circlips
挡圈技术条件--钢丝挡圈 Specifications for ring - Round wire snap rings
挡圈技术条件--切制挡圈 Specifications for ring - Cutting rings
夹紧挡圈 Grip rings
单耳托板自锁螺母垫片 Spacers for self-locking nuts,singlelug, anchor
双耳托板自锁螺母垫片 Spacers for self-locking nuts,twolug, anchor
角形托板自锁螺母垫片 Spacers for self-locking nuts,angle, anchor
十字槽扁圆头螺钉 Screws,cross recessed,oval head
十字槽120°半沉头螺钉 Screws,cross recessed,120°raised countersunk head
管状铆钉 Pipe type rivets
小六角较扁螺母 Small hexagon medium thin nuts
螺母专用技术条件 Specified specifications for nuts
大扁圆头铆钉 Truss head rivets
120°半沉头铆钉 120°degree oval countersunk rivets
平锥头半空心铆钉 Cone head semi-tubuler rivets
大扁圆头半空心铆钉 Truss head semi-tubuar rivets
沉头半空心铆钉 Countersunk head semi-tublar rivets
无头铆钉 Headless rivets
铆钉专用技术条件 Specified specifications for rivets
角形垂直单耳止动垫圈 Lock washers with angular upturn tab perpendicular to the lug
角形单耳止动垫圈 Lock washers with angular upturn tab in line to the lug
角形垂直外舌止动垫圈 Lock washers with angular upturn tab perpendicular to the external tab
角形外舌止动垫圈 Lock washers with angular upturn tab in line to the external tab
内球面垫圈 Inner sphere washers
平键 键和键槽的剖面尺寸 Parallel keys--Dimensions of cross sections and keyways
普通平键 型式尺寸 Plain parallel keys--Types and dimensions
导向平键 型式尺寸 Feather keys--Types and dimensions
半圆键 键和键槽的剖面尺寸 Semi-circular (Woodruff) keys--Dimensions of cross sections and keyways
半圆键 型式尺寸 Woodruff keys--Types and dimensions
矩形花键尺寸、公差和检验 Straight-sided spline-Dimensions,tolerances and verification
旋套式注油油杯基本型式与尺寸 Sleeve type drip-feed lubricating cups--Types and dimensions
过渡配合螺纹 The threads for transition fit
螺柱技术条件 Studs--Technical requirements
一般用普通V带 Classical V-belts for general use
过盈配合螺纹 The interference-fit threads
钢结构用高强度大六角头螺栓 High strength bolts with large hexagon head for steel structures
钢结构用高强度大六角螺母 High strength large hexagon nuts for steel structures
钢结构用高强度垫圈 High strength plain washers for steel structures
钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件 Specifications of high strength bolts with large hexa-gon head, large hexagon nuts, plain washers for steel structures
紧固件标记方法 Designation system for fasteners
冷卷圆柱螺旋拉伸弹簧技术条件 Cold coiled helical tension springs?Technical specifications
冷卷圆柱螺旋压缩弹簧技术条件 Cold coiled helical compressions springs - Technical specifications
冷卷圆柱螺旋扭转弹簧技术条件 Cold coiled helical torsion springs - Technical specifications
热卷圆柱螺旋弹簧技术条件 Hot coiled helical springs - Technical specifications
圆柱螺旋弹簧设计计算 Design of helical springs
短节距传动用精密滚子链和链轮 Short pitch transmission precision roller chains and chain wheels
六角自锁螺母 Self-locking nuts,hexagon
小六角扁自锁螺母 Self-locking nuts,reduced hexagon oblate
小六角自锁螺母 Self-locking nuts,reduced hexagon
成组游动托板自锁螺母支架 Supports for self-locking nuts,anchor floating,Gang channel
通用机械和重型机械用圆柱齿轮--标准基本齿条齿廓 Cylindrical gears for general and heavy engineering--Standard basic rack tooth profile
渐开线圆柱齿轮模数 Modules of involute cyindrical gears
圆柱螺旋弹簧尺寸系列 Helical spring seriate sizes
管路旋入端用普通螺纹尺寸系列 General purpose screw threads for joints on pipe line--Dimensions
米制锥螺纹 Metric tape screw thread
楔键 键和键槽的剖面尺寸 Taper keys--Cross section dimensions of keys and keyways
普通楔键 型式尺寸 Taper keys for general use--Types and dimensions
钩头楔键 型式尺寸 Gib-head taper keys--Types and dimensions
薄型平键 键和键槽的剖面尺寸 Thin flat keys--Cross section dimensions and keyways
薄型平键 型式尺寸 Thin flat keys--Types and dimensions
键 技术条件 Technical specifications for keys
圆柱形轴伸 Cylindrical shaft ends
圆锥形轴伸 Conical shaft ends
弹簧术语 Nomenclature of springs
圆弧圆柱齿轮模数 Modules of cylindrical gear with circular arc profiles
碟形弹簧 Disc spring
小型圆柱螺旋弹簧技术条件 Small cylindrically coiled springs - Specification
小型圆柱螺旋拉伸弹簧尺寸及参数 Small cylindrically coiled tension spring - Dimensions and parameters
小型圆柱螺旋压缩弹簧尺寸及参数 Small cylindrically coiled compression spring - Dimensions and parameters
切向键及其键槽 Tangential keys and keyways
圆柱螺旋拉伸弹簧尺寸及参数(半圆钩环型) Cylindrically coiled tension spring dimensions and parameters (Half ring profile with hook)
圆柱螺旋拉伸弹簧(圆钩环压中心型)尺寸及参数 Cylindrically coiled tension spring dimensions and parameters
圆柱螺旋压缩弹簧(两端圈并紧磨平或锻平型) 尺寸及参数 Cylindrically coiled compression spring--Dimensions and parameters
小模数渐开线圆柱齿轮基本齿廓 Basic rack tooth profile of fine-pitch involute cylindrical gears
小模数渐开线圆柱齿轮精度 Accuracy of fine-pitch involute cylindrical gears
弹性环联轴器 Coupling with flexible ring
滑动轴承铜合金整体轴套形式、尺寸与公差 Copper alloy integrated shaft sleeves for plain bearings--Types, dimensions and tolerances
滑动轴承铜合金带挡边整体轴套形式、尺寸与公差 Copper alloy integrated shaft sleeves for plain bearings with gears--Types, dimensions and tolerances
滑动轴承铜合金整体轴套技术条件 Copper alloy integrated shaft sleeves--Technical requirements
普通螺纹偏差表 (直径1~355mm) Common screw thread deviation table
内六角花形盘头螺钉 Hexagon lobular socket pan head screws
内六角花形沉头螺钉 Hexagon lobular socket countersunk head screws
内六角花形半沉头螺钉 Hexagon lobular socket raised countersunk head screws
滑动轴承 粉末冶金筒形轴承型式、尺寸与公差 Powder metallurgy plain bearing--Cylindrical type--Types, dimensions and tolerances
滑动轴承 粉末冶金带挡边筒形轴承型式、尺寸与公差 Powder metallurgy plain bearing--Rimed cylindrical type--Types, dimensions and tolerances
滑动轴承 粉末冶金球形轴承型式、尺寸与公差 Powder metallurgy plain bearing--Spherical type--Types, dimensions and tolerances
滑动轴承 粉末冶金轴承技术条件 Powder metallurgy plain bearing--Technical requirements
齿轮几何要素代号 Symbols for gear geometrical data
滑动轴承 术语 Plain bearings--Terms, definitions and classification
紧固件机械性能 螺栓、螺钉和螺柱 Mechanical properties of fasteners Bolts,screws and studs
紧固件机械性能 螺母 粗牙螺纹 Mechanical properties of fasteners--Nuts--Coarse thread
紧固件机械性能 紧定螺钉 Mechanical properties of fasteners made of carbon steel and alloy steel--Part 5:Set screws and similar threaded fasteners not under tensile stresses
紧固件机械性能 螺母 细牙螺纹 Mechanical properties of fasteners--Part 6:Nuts with specified proof load values--Fine pitch thread
紧固件机械性能 自攻螺钉 Mechanical properties of fasteners--Heat-treated steel tapping screws
紧固件机械性能 不锈钢螺栓、螺钉和螺柱 Mechanical properties of corrosion-resistant stainless-steel fasteners--Part 1:Bolts,screws and studs
紧固件机械性能 自挤螺钉 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
紧固件机械性能 耐热用螺纹连接副 Mechanical properties of fasteners--Components for bolted connections made mainly from materials with a high temperature strength
紧固件机械性能有效力矩型钢六角锁紧螺母 Mechanical properties of fasteners--Prevailing torque type steel hexagon nuts
紧固件机械性能 有色金属制造的螺栓、螺钉、螺柱和螺母 Mechanical properties of fasteners--Bolts, screws, studs and nuts made of non-ferrous metals
紧固件机械性能自钻自攻螺钉 Mechanical properties of fasteners--Self-drilling tapping screws
紧固件机械性能 螺母锥形保证载荷试验 Mechanical properties of fasteners--Cone proof load test on nuts
紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
紧固件机械性能 螺母扩孔试验 Mechanical properties of fasteners--Widening test on nuts
紧固件机械性能 不锈钢螺母 Mechanical properties of corrosion-resistant stainless-steel fasteners--Part 2:Nuts
紧固件机械性能 不锈钢紧定螺钉 Mechanical properties of corrosion-resistant stainless-steel fasteners--Part 3:Set screws and similar fasteners not under tensile stress
紧固件机械性能 检查氢脆用预载荷试验 平行支承面法 Fasteners--Preloading test for the detection of hydrogen embrittlement--Parallel bearing surface method
螺栓、螺钉、螺母及附件名词术语 Bolts, screws, nuts and accessories--Terminology and nomenclature
紧固件公差 螺栓、螺钉和螺母 Tolerances for fasteners--Bolts, screws and nuts
紧固件公差 用于精密机械的螺栓、螺钉和螺母 Tolerances for fasteners--Bolts, screws and nuts for fine mechanics
紧固件公差 平垫圈 Tolerances for fasteners--Part 3:Plain washers for bolts,screws and nuts--Product grades A and C
紧固件公差 耐热用螺纹连接副 Tolerances for fasteners--Components for bolted connections made mainly from materials with a high temperature strength
紧固件 六角产品的对边宽度 Fasteners--Widths across flats of hexagon products
螺栓和螺钉的头下圆角半径 Radii under the head of bolts and screws
螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度 Bolts, screws and studs--Nominal lengths, and thread lengths for general purpose bolts
滑动轴承薄壁轴瓦尺寸、结构要素与公差 Plain bearings - Thin-walled bearing shells - Dimensions, structure elements and tolerances
圆柱直齿渐开线花键模数 基本齿廓 公差 Straight cylindrical involute splines--Modules, basic rack profiles and tolerances
圆柱直齿渐开线花键 30°压力角 尺寸表 Straight cylindrical involute splines--30°pressure angle dimenslons tables
圆柱直齿渐开线花键 37.5°压力角 尺寸表 Straight cylindrical involute splines--37.5°pressure angle dimensions tables
圆柱直齿渐开线花键 45°压力角 尺寸表 Straight cylindrical involute splines--45°pressure angle dimensions tables
圆柱直齿渐开线花键 检验方法 Straight cylindrical involute splines--Inspection methods
圆柱直齿渐开线花键 30°压力角 M值和W值 Straight cylindrical involute splines--30°pressurengle M and W values
圆柱直齿渐开线花键 37.5°压力角 M值和W值 Straight cylindrical involute splines--37.5°pressure angle M and W values
圆柱直齿渐开线花键 45°压力角 M值和W值 Straight cylindrical involute splines--45°pressure angle-M and W values
圆柱直齿渐开线花键 量棒 Straight cylindrical involute splines--Measuring pin
渐开线圆柱齿轮承载能力计算方法 Calculation methods of load capacity for involute cylindrical gears
机械式联轴器公称扭矩系列 Nominal torque series of the mechanical coupling
钢结构用扭剪型高强度螺栓连接副 Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
钢结构用扭剪型高强度螺栓连接副 技术条件 Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures
卡套式端直通管接头 Straight thread connector--Assembly
卡套式端直通接头体 Straight thread connector--Body
卡套式锥螺纹直通管接头 Male connector--Assembly
卡套式锥螺纹直通接头体 Male connector--Body
卡套式端直通长管接头 Straight thread long connector--Assembly
卡套式端直通长接头体 Straight thread long connector--Body
卡套式锥螺纹长管接头 Male long connector--Assembly
卡套式锥螺纹长接头体 Male long connector--Body
卡套式直通管接头 Union--Assembly
卡套式直通接头体 Union--Body
卡套式端直角管接头 Straight thread elbow--Assembly
卡套式端直角接头体 Straight thread elbow--Body
卡套式锥螺纹直角管接头 Male elbow--Assembly
卡套式锥螺纹直角接头体 Male elbow--Body
卡套式直角管接头 Union elbow--Assembly
卡套式直角接头体 Union elbow--Body
卡套式端三通管接头 Straight thread branch tee--Assembly
卡套式端三通接头体 Straight thread branch tee--Body
卡套式锥螺纹三通管接头 Male branch tee--Assembly
卡套式锥螺纹三通接头体 Male branch tee--body
卡套式端直角三通管接头 Straight thread run tee--Assembly
卡套式端直角三通接头体 Straight thread run tee--Body
卡套式锥螺纹直角三通管接头 Male run tee--Assembly
卡套式锥螺纹直角三通接头体 Male run tee--Body
卡套式三通管接头 Union tee--Assembly
卡套式三通接头体 Union tee--Body
卡套式四通管接头 Union cross-Assembly
卡套式四通接头体 Union cross--Body
卡套式焊接管接头 Weld male connector--Assembly
卡套式焊接接头体 Weld male connector--Body
卡套式隔壁直通管接头 Bulkhead union--Assmbly
卡套式隔壁直通接头体 Bulkhead union--Body
卡套式隔壁直角管接头 Bulkhead union elbow--Assembly
卡套式隔壁直角接头体 Bulkhead union elbow--Body
卡套式铰接管接头 Angle swivel screw--Assembly
卡套式铰接接头体 Angle swivel screw--Body
卡套式铰接六角螺栓 Hollow screws
卡套式组合直角管接头 Adjustable elbow--Assembly
卡套式组合直角接头体 Adjustable elbow--Body
卡套式组合三通管接头 Adjustable T-unions--Assembly
卡套式组合三通接头体 Adjustable T-unions--Body
卡套式端对接直通管接头 Straight thread connector for butt joints--Assembly
卡套式端对接直通接头体 Straight thread connector for butt joints--Body
卡套式锥螺纹对接直通管接头 Male connector for butt joints--Assembly
卡套式锥螺纹对接直通接头体 Male connector for butt joints--Body
卡套式对接直通管接头 Union for butt joints--Assembly
卡套式对接直通接头体 Union for butt joints--Body
卡套式端对接直角管接头 Straight thread elbow for butt joints--Assembly
卡套式端对接直角接头体 Straight thread elbow for butt joints--Body
卡套式锥螺纹对接直角管接头 Male elbow for butt joints--Assembly
卡套式锥螺纹对接直角接头体 Male elbow for butt joints--Body
卡套式管接头用螺母 Bite type tube fittings--Nuts
卡套式管接头用对接螺母 Bite type tube fittings--Nuts for butt joints
卡套式管接头用锥体环 Bite type tube fittings--Pressure bush for butt joints
卡套式管接头用尖角密封垫圈 Bite type tube fittings--Tipping washer
卡套式管接头用六角薄螺母 Bite type tube fittings--Hexagon thin nuts
卡套 Ferrule
卡套式管接头技术条件 Specification for bite type tube fittings
联轴器轴孔和联结型式与尺寸 Types and dimension for coupling bores and their connection
滚动轴承 外球面球轴承和偏心套外形尺寸 Rolling bearings--Insert bearings and eccentric looking collars --Boundary dimensions
联轴器 术语 Coupling--Vocabulary
关节轴承 词汇 Spherical plain bearing,joint type--Vocabulary
莫氏圆锥的强制传动型式及尺寸 The type and dimensions for positive drive of Morse tapers
输送用平顶链和链轮 Flat-top chains and associated chainwheels for conveyors
圆柱螺旋拉伸弹簧尺寸及参数(圆钩环型) Cylindrically coiled tension spring dimensionsand parameters(Ring profile with Hook)
滚动轴承公差定义 Rolling bearings--Tolerances-definitions
通用卧式平衡机校验法 Method of verification for universal horizontal balancing machines
弹性套柱销联轴器 Pin coupling with elastic sleeve
平型传动带的宽度和长度 Flat transmission belts widths and lengths
滚针轴承 重系列 尺寸和公差 Needle roller bearings--Heavy series--Dimensions and tolerances
滚动轴承 径向游隙 Rolling bearings--Radial internal clearance
滚动轴承 圆锥滚子轴承 凸缘外圈 外形尺寸 Rolling bearings--Metric tapered roller bearings--Flanged cups--Boundary dimensions
滚动轴承 圆柱滚子 Rolling bearings-cylindrical rollers
滚动轴承 额定静负荷 Rolling bearings--Static load ratings
滚动轴承 推力圆柱滚子轴承 外形尺寸 Rolling bearings--Cylindrical thrust roller bearings--Boundary dimensions
机械制造工艺基本术语 General terminology of machine-building technology
弹性柱销联轴器 Elastic pin coupling
弹性柱销齿式联轴器 Gear coupling with elastic pin
设备可靠性试验 恒定失效率假设的有效性检验 Equipment reliability testing--Tests for the validity of a constant failure rate assumption
传动及输送用双节距精密滚子链和链轮 Double-pitch precision roller chains and sprockets for transmission and conveyors
梅花形弹性联轴器 Coupling with elastic spider
紧固件 螺栓、螺钉、螺柱及螺母尺寸代号和标注 Fasteners--Bolts,screws,studs and nuts--Symbols and designations of dimensions
紧固件 螺栓和螺钉通孔 Fasteners--Clearance holes for bolts and screws
紧固件 开口销孔和金属丝孔 Fasteners--Split pin holes and wireholes
沉头螺钉 头部形状和测量 Countersunk head screws--Head configuration and gauging
沉头螺钉 第2部分: 十字槽插入深度 Countersunk flat head screws--Part 2: Penetration depth of cross recesses
自攻螺钉用螺纹 Tapping screws thread
内六角圆柱头轴肩螺钉 Hexagon socket head shoulder screws
开槽盘头自攻螺钉 Slotted pan head tapping screws
开槽沉头自攻螺钉 Slotted countersunk head tapping screws
开槽半沉头自攻螺钉 Slotted raised countersunk head tapping screws
六角头自攻螺钉 Hexagon head tapping screws
螺栓、螺钉和螺母用平垫圈 总方案 Plain washers for bolts,screws and nuts--General plan
特大垫圈 C级 Plain washers--Extra large series--Product grade C
橡胶密封制品术语 Rubber sealings articles-Terminology
O形橡胶密封圈试验方法 Test methods for rubber O rings
橡胶密封制品标志、包装、运输、贮存的一般规定 General rules of identification, packaging, transportation and storage for rubber sealing products
紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求 Fasteners--Surface discontinuities--Part 1:Bolts,screws and studs for general requirements
紧固件表面缺陷 螺母 Fasteners-surface discontinuities--Part 2:Nuts
紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求 Fasteners--Surface discontinuities--Part 3:Bolts,screws and studs for special requirements
六角头螺栓C级 Hexagon head bolts--Product grade C
六角头螺栓 全螺纹 C级 Hexagon head bolts--Full thread--Product grade C
六角头螺栓 Hexagon head bolts--Product grades A and B
六角头螺栓 全螺纹 Hexagon head bolts--Full thread--Product grades A and B
六角头螺栓--细杆 B级 Hexagon head bolts - Reduced shank - Product grade B
六角头螺栓 细牙 Hexagon head bolts with metric fine pitch thread--Product grades A and B
六角头螺栓 细牙 全螺纹 Hexagon head bolts with metric fine pitch thread--Full thread--Product grades A and B
六角法兰面螺栓--加大系列--B级 Hexagon flange bolts - Heavy series - Product grade B
六角法兰面螺栓--加大系列--细杆--B级 Hexagon flange bolts - Heavg eries--Product grade B
梯形螺纹 牙型 Metric trapezoidal screw threads - Profile
梯形螺纹 直径与螺矩系列 Metric trapezoidal screw threads--System of diameter and pitch
梯形螺纹 基本尺寸 Metric trapezoidal screw threads--Basic dimensions
梯形螺纹 公差 Metric trapezoidal screw threads--Tolerances
滚动轴承 仪器精密轴承 Rolling bearings--Instrument precision bearings
滚动轴承 轻中系列滚针轴承 外形尺寸和公差 Rolling bearings--Light and medium series needle roller bearings--Boundary dimensions and tolerances
凸缘联轴器 Flanged coupling
轮胎式联轴器 Coupling with rubber tyre element
尺寸链 计算方法 Dimensional chain--Methods of calculation
重载传动用弯板滚子链和链轮 Heavy-duty cranked-link transmission roller chains and chain wheels
滚动轴承 推力调心滚子轴承 外形尺寸 Rolling bearings--Self-aligning thrust roller bearings--Boundary dimensions
滚动轴承安装尺寸 Dimensions for mounting rolling bearings
机械密封名词术语 The terms of mechanical seal
滚子链联轴器 Roller chain coupling
LT 型高弹性摩擦离合器 Type LT highly elastic frictionclutch
板式链、端接头及槽轮 Leaf chains, clevises and sheaves
传动用短节距精密套筒链 Short pitch transmission precision bush chains
1型六角螺母 Hexagon nuts,style 1--Product grades A and B
1型六角螺母 细牙 Hexagon nuts,style 1,with metric fine pitch thread--Product grades A and B
六角薄螺母 Hexagon thin nuts(chamfered)--Product grades A and B
非金属嵌件六角锁紧薄螺母 Prevailing torque type hexagon thin nuts(with non-metallic insert)
六角薄螺母 细牙 Hexagon thin nuts(unchamered) with metric fine pitch thread--Product grades A and B
六角薄螺母 无倒角B级 Hexagon thin nuts(unchamfered)--Product grades B
2型六角螺母 Hexagon nuts,style 2--Product grades A and B
2型六角螺母 细牙 Hexagon nuts, style 2,with metric fine pitch thread--Product grades A and B
六角法兰面螺母 Hexagon nuts with flange--Coarse thread
六角法兰面螺母 细牙 Hexagon nuts with flange--Fine pitch thread
1型六角开槽螺母 A和B级 Hexagon slotted and castle nuts, style 1--Product grades A and B
1型六角开槽螺母 C级 Hexagon slotted nuts, style 1--Product grade C
2型六角开槽螺母 A和B级 Hexagon slotted and castle nuts,style 2--Product grades A and B
六角开槽薄螺母 A和B级 Hexagon thin slotted nuts--Product grades A and B
2型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts(with non-metallic insert),style 2--Property classes 9 and 12
非金属嵌件六角法兰面锁紧螺母 Prevailing torque type hexagon nuts with flange(with non-metallic insert)--Product grades A and B
非金属嵌件六角法兰面锁紧螺母 细牙 Prevailing torque type hexagon nuts with flange(with non-metallic insert) with metric fine pitch thread--Product grades A and B
1型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 1--Property classes 5,8 and 10
2型全金属六角锁紧螺母 Prevailing torque type all-metal hexagon nuts,style 2--Property classes 5,8,10 and 12
2型全金属六角锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts,style 2,with metric fine pitch thread--Property classes 8,10 and 12
2型全金属六角锁紧螺母9级 Prevailing torque type all-metal hexagon nuts,style 2--Property class 9
全金属六角法兰面锁紧螺母 Prevailing torque type all-metal hexagon nuts with flange--Product grades A and B
全金属六角法兰面锁紧螺母 细牙 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread--Product grades A and B
螺栓和螺钉用内六角花形 Hexalobular internal driving feature for bolts and screws
紧固件用六角花形 E型 Hexagon lobular for fasteners--Type E
内六角花形圆柱头螺钉 4.8级 Hexagon lobular socket head cap screws--Property class 4.8
内六角花形圆柱头螺钉 8.8级 Hexagon lobular socket head cap screws--Property class 8.8
电力液压块式制动器 The electro-hydraulic double-shoe brakes
直流电磁铁块式制动器 DC-electromagnet double-shoe brakes
滚动轴承 额定动载荷和额定寿命 Rolling bearings--Dynamic load ratings and rating life
齿轮装置噪声声功率级测定方法 Determination of sound power level for noise emitted by gear units
渐开线圆柱齿轮胶合承载能力计算方法 Calculation of scuffing load capacity for involute cylindrical gears
渐开线圆柱齿轮图样上应注明的尺寸数据 Involute cylindrical gears--Information of the dimensional data to be given on the drawing
机械振动 平衡术语 Mechanical vibration--Balancing vocabulary
滚动轴承 滚轮滚针轴承 外形尺寸 Rolling bearings Needle roller bearings--Track rollers--Boundary dimensions
滚动轴承 滚轮滚针轴承 公差 Rolling bearings--Needle roller bearings-Track rollers--Tolerances
齿轮渐开线 样板 The involute master of gear
齿轮螺旋线样板 The helix master of gear
机械密封的型式、主要尺寸、材料和识别标志 Type, main dimension, material and marking of mechanical seals
挠性转子机械平衡的方法和准则 Mechanical vibration--Methods and criteria for the mechanical balancing of flexible rotors
自攻锁紧螺钉的螺杆 粗牙普通螺纹系列 Screw thread shanks for thread forming screw--Metric coarse thread series
十字槽盘头自攻锁紧螺钉 Cross recessed pan head thread forming screws
十字槽沉头自攻锁紧螺钉 Cross recessed countersunk head thread forming screws
十字槽半沉头自攻锁紧螺钉 Cross recessed raised countersunk head thread forming screws
六角头自攻锁紧螺钉 Hexagon head thread forming screws
内六角花形圆柱头自攻锁紧螺钉 Hexagon lobular socket thread forming screws
机床润滑系统 Machine tools--Lubrication systems
铁氧体永磁直流电动机 DC ferrite permanent magnet motors
滚动轴承词汇 Rolling bearings--Vocabulary
带传动基本术语 Drives using belt--Basic terminology
V 带传动术语 Drives using V-belts and grooved pulleys--Terminology
同步带传动术语 Synchronous belt drives--Terminology
凸缘外圈向心球轴承 凸缘尺寸 Radial ball bearings with flanged outer ring--Flange dimensions
滚动轴承 凸缘外圈微型向心球轴承外形尺寸 Rolling bearings--Miniature radial ball bearings with flanged outer ring Boundary dimensions
现场平衡设备的说明和评价 Field balancing equipment--Description and evaluation
重型弹簧垫圈 Single coil spring lock washers, Heavy type
鞍形弹簧垫圈 Curved single coil spring lock washers
波形弹簧垫圈 Wave single coil spring lock washers
可靠性、维修性与有效性预计报告编写指南 Presentation of reliability, maintainability and availability predictions
55°密封管螺纹 第1部分: 圆柱内螺纹与圆锥外螺纹 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1: Parallel internal and taper external threads
55°密封管螺纹 第2部分: 圆锥内螺纹与圆锥外螺纹 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 2: Taper internal and external threads
55°非密封管螺纹 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
滑动轴承薄壁翻边轴瓦尺寸、公差及检验方法 Plain bearings--Thin-walled flanged half bearings--Dimensions, tolerances and methods of checking
球笼式同步万向联轴器型式、基本参数和主要尺寸 Synchronizing universal coupling with ball and sacket--Type, foundational parameters and main dimensions
球笼式同步万向联轴器试验方法 Synchroizing universal coupling with ball and sacket
纤维增强塑料层板螺栓连接挤压强度试验方法 FRP Laminates-test method for bearing strength by bolted joints
滚动轴承 外球面球轴承座外形尺寸 Roliing bearings--Housings for insert bearing boundary dimensions
滚动轴承 带座外球面球轴承外形尺寸 Rolling bearings--Insert bearing units boundary dimensions
滚动轴承 参数符号 Rolling bearings--Symbols for quantities
滚动轴承附件 轴承座 外形尺寸 Rolling bearings accessories--Plummer block housings--Boundary dimensions
塑料轴承极限PV试验方法 Test method for PV limit of plastics bearings
圆头椭圆颈螺栓 Bolts,round head with oval neck
输送链、附件和链轮 Conveyor chains, attachments and chain wheels
齿轮材料及热处理质量检验的一般规定 General specification for quality inspection of gear materials and their heat treatment
透平齿轮传动装置技术条件 Spcification for turbine gearings
验收试验中齿轮装置 机械振动的测定 Determination of mechanical vibrations of gear units during acceptance testing
滚动轴承包装 Rolling bearings-packaging and packing
十字槽盘头螺钉和平垫圈组合件 Cross recessed pan head screw and plain washer assemblies
十字槽盘头螺钉和外锯齿锁紧垫圈组合件 Cross recessed pan head screw and serrated lock washer external teeth assemblies
十字槽盘头螺钉和弹簧垫圈组合件 Cross recessed pan head screw and single coil spring lock washer assemblies
十字槽盘头螺钉, 弹簧垫圈和平垫圈组合件 Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies
十字槽小盘头螺钉和平垫圈组合件 Cross recessed small pan head screw and small plain washer assemblies
十字槽小盘头螺钉和大垫圈组合件 Cross recessed small pan head serew and big plain washer assemblies
十字槽小盘头螺钉和弹簧垫圈组合件 Cross recessed small pan head screw and single coil spring lock washer assemblies
十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件 Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies
十字槽沉头螺钉和锥形锁紧垫圈组合件 Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
十字槽半沉头螺钉和锥形锁紧垫圈组合件 Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
十字槽凹穴六角头螺栓和平垫圈组合件 Cross recessed hexagon bolt with indentation and plain washer assemblies
十字槽凹穴六角头螺栓和弹簧垫圈组合件 Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies
十字槽凹穴六角头螺栓, 弹簧垫圈和平垫圈组合件 Cross recessed hexagon bolt with indentation, single coil lock washer and plain washer assemblies
六角头螺栓和平垫圈组合件 Hexagon head bolt and plain washer assemblies
六角头螺栓和弹簧垫圈组合件 Hexagon head bolt and single coil spring lock washer assemblies
六角头螺栓和外锯齿锁紧垫圈组合件 Hexagon head bolt and serrated lock washer external teeth assemblies
六角头螺栓, 弹簧垫圈和平垫圈组合件 Hexagon head bolt, single coil spring lock washer and plain washer assemblies
十字槽盘头自攻螺钉和平垫圈组合件 Cross recessed pan head tapping screw and plain washer assemblies
十字槽盘头自攻螺钉和大垫圈组合件 Cross recessed pan head tapping screw and large plain washer assemblies
十字槽凹穴六角头自攻螺钉和平垫圈组合件 Cross recessed hexagon head tapping sorew with indentation and plain washer assemblies
十字槽凹穴六角头自攻螺钉和大垫圈组合件 Cross recessed hexagon head tapping screw with indentation and large plain washer assemblies
六角头自攻螺钉和平垫圈组合件 Hexagon head tapping screw and plain washer assemblies
六角头自攻螺钉和大垫圈组合件 Hexagon head tapping screw and big washer assemblies
组合件用平垫圈 Plain washer for assembly
组合件用大垫圈 Big plain washer for assembly
组合件用弹簧垫圈 Single coil spring lock washer for assembly
组合件用外锯齿锁紧垫圈 Serrated lock washer external teeth for assembly
组合件用锥形锁紧垫圈 Countersunk external toothed lock washer for assembly
自攻螺钉组合件用平垫圈 Samll wasner for tapping screw assembly
自攻螺钉组合件用大垫圈 Big washer for tapping screw assembly
商品紧固件的中等精度 普通螺纹极限尺寸 General purpose screw threads - Limits of sizes for commercial bolt and nut threads?Medium quality
商品紧固件的粗糙级精度 普通螺纹极限尺寸 General purpose screw threads - Limits of sizes for commercial bolt and nut threads?Coarse quality
磁粉离合器通用技术条件 General specification for magnetic particle clutch
关节轴承 杆端关节轴承 Spherical plain bearings--Spherical plain bearings rod ends
关节轴承 推力关节轴承 Spherical plain bearings--Thrust spherical plain bearings
关节轴承 向心关节轴承 Spherical plain bearings--Radial spherical plain bearings
关节轴承 角接触关节轴承 Spherical plain bearings--Angular contact radial spherical plain bearings
刚性转子平衡品质 许用不平衡的确定 Balance quality of rigid rotors--Determination of permissible residual unbalance
十字槽凹穴六角自攻螺钉 Cross recessed hexagon head tapping screws with indentation
1 型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts, style l--Fine pitch thread--Product grades A and B
2 型六角开槽螺母 细牙 A和B级 Hexagon slotted and castle nuts, style 2--Fine pitch thread--Product grades A and B
六角开槽薄螺母 细牙 A和B级 Hexagon thin slotted nuts--Fine pitch thread--Product grades A and B
链条、链轮术语 Terminology of chains and chainwheels
旋转轴唇形密封圈结构尺寸系列 第一部分: 内包骨架旋转轴唇形密封圈 Rotary shaft lip seals--Design criteria for standard applications--Part 1: rubber covered rotary shaft lip seals
旋转轴唇形密封圈结构尺寸系列 第二部分: 外露骨架旋转轴唇形密封圈 Rotary shaft lip seals--Design criteria for standard applications--Part 2: Metal cased rotary shaft lip seals
旋转轴唇形密封圈结构尺寸系列 第三部分: 装配式旋转轴唇形密封圈 Rotary shaft lip seals--Design criteria for standard applications--Part 3: assembled rotary shaft lip seals
锥齿轮承载能力计算方法 Methods for the calculation of load capacity for bevel gears
通用机械渐开线圆柱齿轮 承载能力简化计算方法 Simplified methods for the calculation of load capacity of involute cylindrical gears for general machines
矩形内花键 长度系列 Straight-sided internal spline--Length series
圆柱蜗杆传动基本参数 Basic parameters of cylindrical worm gears
圆柱蜗杆、蜗轮术语及代号 Terminology and symbols for cylindrical worm and worm wheel
圆柱蜗杆基本齿廓 Basic tooth profile of cylindrical worm
圆柱蜗杆模数和直径 Module and diameter of cylindrical worm
圆柱蜗杆、蜗轮精度 Accuracy of cylindrical worm and wormwheel
圆柱齿轮减速器基本参数 Basic parameters for cylindrical gear units
渐开线圆柱齿轮--精度 第1部分: 轮齿同侧齿面偏差的定义和允许值 Cylindrical gears--system of accuracy--Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
渐开线圆柱齿轮--精度 第2部分: 径向综合偏差与径向跳动的定义和允许值 Cylindrical gears-system of accuracy--Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
齿条精度 Accuracy of rack
摆线针轮行星传动 基本术语 Basic terminology of cycloidal drives
摆线针轮行星传动 图示方法 Representation of drawings for cycloidal drives
摆线针轮行星传动 几何要素代号 Symbols of geometrical data for cycloidal drives
小模数锥齿轮基本齿廓 Basic rack tooth profile of fine-pitch bevel gears
小模数锥齿轮精度 Accuracy of fine-pitch bevel gears
小模数圆柱蜗杆基本齿廓 Basic rack tooth profile of fine-pitch cylindrical worm
小模数圆柱蜗杆、蜗轮精度 Accuracy of fine-pitch cylindrical worm and wormwheel
普通V带轮 Grooved pulleys for classical V-belt
窄V带轮 Grooved pulleys for narrow V-belt
汽车同步带传动 带轮 Synchronous belt drives for automotive applications - Pulleys
农业机械用双面V带轮 Agricultural machinery double V-belt pulleys
农业机械用半宽V带轮 Agricultural machinery half wide V-belt pulleys
单级向心涡轮液力变矩器 型式和基本参数 Single-stage centripetal turbine hydrodynamic torque converters - Types and basic parameters
紧固件横向振动试验方法 Transverse vibration testing method for fasteners
无头焊钉 Headless studs for stud welding
圆柱头焊钉 Cheese head studs for stud welding
机械密封产品型号编制方法 Method of establishment for type of mechanical seals
滑动轴承 整体轴套的轴径 Plain bearings - Shaft diameters for unsplit bushes
滑动轴承 整圆止推垫圈 尺寸和公差 Plain bearings - Ring type thrust washers made from strip - Dimensions and tolerances
滑动轴承 半圆止推垫圈 要素和公差 Plain bearings - Pressed bimetallic half thrust washers - Features and tolerances
芯型弹性联轴器 Resilient coupling with core element
抗静电环形V带导电性规定值和试验方法 Antistatic endless V-belts - Electrical conductivity - Characteristic and method of test
汽车同步带物理性能试验方法 Synchronous belt drives--Automotive belt--Determination of physical properties
农业机械用V带尺寸 V-belts for agricultural machinery-Dimensions
机器理论与机构学术语 Terminology for the theory of machines and mechanisms
传动用齿形链及链轮 Inverted tooth chains and chainwheels
双涡轮液力变矩器通用技术条件 General specifications of double--Turbine torque converter
1/4 圆锥量规 Gaugers of 1/4 tapers
聚酰胺片基平带 Polyamide plate based flat belt
V 带传动 额定功率的计算 V-belt drives - Calculation of power ratings
带传动 普通及窄V带传动用带轮(基准宽度制) 槽形检验 Belt drives--Pulleys for classical and narrow V-belts drives(system based on datum width)--Geometrical inspection of grooves
带传动 普通及窄V带传动用带轮(有效宽度制) 槽形检验 Belt drives--Pulleys for classical and narrow V-belts drives(system based effective width)--Geometrical inspection of grooves
带轮的材质、表面粗糙度及平衡 Quality , Surfaceroughness and balance of transmission pulleys
带传动 平带和带轮 尺寸和公差 Belt drives--Flat transmission belts and corresponding pulleys--Dimensions and tolerances
同步带传动 带轮 Synchronous belt drives - Pulleys
同步带传动 额定功率和传动中心距的计算 Synchronous belt drives - Calculation of power rating and drive centre distance
锥齿轮和准双曲面齿轮 精度 Accuracy of bevel and hypoid gears
行星传动基本术语 Basic terminology of planetary drives
锥齿轮胶合承载能力计算方法 Methods for the calculation of scuffing load capacity for bevel gears
防锈术语 Rust prevention terminology
普通V带和窄V带尺寸 Classical and narrow V-belts--Dimensions
汽车V带疲劳试验方法 V-belt drives for the automotive industry--Fatigue test
同步带尺寸 Synchronous belts - Dimensions
圆锥量规公差与技术条件 Tolerances and specification of taper gauges
莫氏与公制圆锥量规 Gauges of Morse tapers and metric tapers
7:24工具圆锥量规 Gauges of 7:24 tapers
钻夹圆锥量规 Gauges of drill chuck tapers
梯形螺纹 极限尺寸 Limits of sizes for metric trapezoidal screw threads
锥齿轮模数 Modules of bevel gears
直齿及斜齿锥齿轮基本齿廓 Basic tooth profile of straight and skew bevel gears
锥齿轮和准双曲面齿轮 术语 Terminology for bevel and hypoid gears
锥齿轮 图样上应注明的尺寸数据 Bevel gears?Information of the dimensional data to be given on the drawing
机械式联轴器分类 Mechanical coupling - Classification
小模数圆柱齿轮减速器通用技术条件 General specification for speed reducer with small module cylindrical gears
高扭矩十字槽 Offset cruciform recess for rotary fastening devices
谐波齿轮传动基本术语 Basic terminology of harmonic gear drive
滑动轴承 卷制轴套 Plain bearings - Wrapped bushes
封闭型扁圆头抽芯铆钉 Mushroom head break mandrel closed end blind rivets
封闭型沉头抽芯铆钉 120 deg flush head break mandrel closed end blind rivets
开口型沉头抽芯铆钉 120 deg flush head break mandrel blind rivets
开口型扁圆头抽芯铆钉 Mushroom head break mandrel blind rivets
抽芯铆钉 技术条件 Specifications for break mandrel blind rivets
60°圆锥管螺纹 Taper pipe threads with 60 degree
矿用高强度圆环链 High-tensile steel chains(round link) for mining
窄V带 Narrow V-belt
难燃V带 Fire resistant V-belt
工业用变速宽V带尺寸 Size-Speed-chaingers wide V-belts for industry
汽车同步带尺寸 Automotive synchronous belt - Dimensions
农业机械用V带疲劳试验方法 Fatigue test method for agricultural V-belts
双圆弧圆柱齿轮基本齿廓 Double-circular-arc tooth profile of basic rack for cylindrical gears
圆柱蜗杆、蜗轮图样上应注明的尺寸数据 Cylindrical worm and wormwheel information of the dimensional data to be given on the drawing
滚动轴承 冲压外圈滚针轴承外形尺寸方案 Rolling bearings - Needle roller bearings, drawn cup, without inner ring - Boundary dimension plan
关节轴承 安装尺寸 Spherical plain bearings, joint type - Abutment and fillet dimensions
滑动轴承 双金属结合强度破坏性试验方法 Plain bearings - Metallic multilay er plain bearings - Destructive testing of bond for bearing metals
滑动轴承 覆有减摩塑料层的双金属轴套 Plain bearings - Bimetallic bushes with plastic overlay
平衡机 防护罩和其他安全措施 Batancing machines - Enclosures and other safety measu res
石油和液体石油产品立式圆筒形金属油罐容积标定法(光电内测距法) Petroleum and liquid petroleum products--Volumetric calibration of vertical cylindrical metal tanks--Electro-optical distance-ranging internal method
标牌 Plates
机械振动台技术条件 Specification for mechanical vibration generator system
电动振动台技术条件 Specification for electrodynamic vibration generator system
轧机油膜轴承通用技术条件 General technical requirement of oil film bearing for rolling mill
汽车V带尺寸 Automotive V-belts--Dimensions
一般传动用同步带 Synchronous belts for general drive
V 带均匀性规范和试验方法 中心距变化量法 V-belts - Uniformity of belts - Centre distance variation - Specification and test method
带传动--普通V带传动 Belt drives - Classical V-belt drives
带传动--窄V带传动 Belt drives - Narrow V-belt drives
锯齿形(3°、30°)螺纹 牙型 Butterss threads with 3 and 30 degrees flank angle - Profiles
锯齿形(3°、30°)螺纹 直径与螺距系列 Buttress threads with 3 and 30 degrees flank angle - General plan
锯齿形(3°、30°)螺纹 基本尺寸 Buttress threads with 3 and 30 degrees flank angle - Basic dimensions
锯齿形(3°、30°)螺纹 公差 Buttress threads with 3 and 30 degrees flank angle - Tolerances
合理润滑技术通则 General principle for rational lubrication technology
齿轮胶合承载能力试验方法 Standard test method for scuffing load capacity of gears
焊接方螺母 Square weld nuts
焊接六角螺母 Hexagon weld nuts
螺纹紧固件轴向载荷疲劳试验方法 Axial load fatigue testing for threaded fasteners
销 剪切试验方法 Pins and grooved pins - Shear test
双圆弧圆柱齿轮承载能力计算方法 Methods of the calculation for load capacity of cylindrical gear with double-circular-arc tooth profile
精密机械用紧固件 十字槽螺钉 Fasteners for fine mechanics--Cross recessed screws
精密机械用紧固件 十字槽自攻螺钉 刮削端 Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point
腰状杆螺柱连接副 型式分类 Connections with waisted stud--Tape classification
腰状杆螺柱连接副 螺柱 Connections with waisted stud--Studs
腰状杆螺柱连接副 螺母、受力套管 Connections with waisted stud--, Nuts, extension sleeves
多股圆柱螺旋弹簧 Stranded wire cylindrical helical springs
槽销 平行沟槽 Grooved pins--Parallel grooved
槽销 锥槽 Grooved pins--Taper grooved
槽销 圆头、沉头 Grooved pins--With round head or countersunk head
旋转轴唇形密封圈基本尺寸和公差 Rotary shaft lip type seals--Nominal dimensions and tolerances
渐开线圆柱齿轮精度检验规范 Inspection code for accuracy of involute cylindrical gears
谐波传动减速器 Harmonic drive reducers
缠绕式垫片试验方法 Test methods for spiral wound gaskets
纺织玻璃纤维 无捻粗纱 棒状复合材料压缩强度的测定 Textile glass--Rovings--Determination of compressive strength of rod composites
墙板自攻螺钉 Dry wall screws
机械密封试验方法 Code for test of machanical seal
齿轮接触疲劳强度试验方法 Standard of test method for surface load capacity of gears
齿轮弯曲疲劳强度试验方法 Standard of test methed for bending load capacity of gears
齿轮装置效率测定方法 Determination of efficiency for gear units
旋转轴唇形密封圈性能试验方法 Rotary shaft lip type seals--Performance test proceduces
复合阻尼隔振器和复合阻尼器 Compound damping isolator and compound damper
V带疲劳试验方法 有扭矩法 V-belts--Fatigue test--Loaded method
螺纹术语 The terms of screw threads
滑动轴承 厚壁多层轴承衬背技术要求 Plain bearings--Requirements on backings for thick-walled multilayer bearings
小螺纹 牙型 Miniature screw threads--Profiles
小螺纹 直径与螺距系列 Miniature scrcw threads--Generat plan
小螺纹 基本尺寸 Miniature screw threads--Basic dimensions
小螺纹 公差 Miniature screw threads--Tolerances
小螺纹 极限尺寸 Miniature screw threads--Limits of sizes
液粘调速离合器 Hydroviscous variable speed clutch
湿式离合器摩擦元件 试验方法 Test method for friction element of wet clutch
可靠性增长大纲 Programmes for reliability growth
往复运动橡胶密封圈外观质量 Appearance quality for reciprocating rubber seals
旋转轴唇形密封圈外观质量 Appearance quality for rotary shaft lip seals
工业用变速宽V带及其尺寸 Variable speed-changers wide V-belts and size for industry
普通V带疲劳试验方法(无扭矩法) Classical V-belts--Fatigue test(non-loading method)
螺杆 Threaded rods
工程用钢制焊接弯板链和链轮 Welded steel type cranked link mill chains and chain wheels
带传动 带轮 中心距调整极限值 Belt drives--Pulleys--Limiting values for adjustment of centres
圆弧圆柱齿轮基本术语 Terminology of circular-arc gear
圆弧圆柱齿轮精度 Accuracy of cylindrical gear with circular-arc tooth profile
圆锥过盈配合的计算和选用 The calculation and selection of cone interference fits
普通螺纹 极限尺寸 Limits of size for general purpose screw threads
花键基本术语 Basic terminology of spline
V带和多楔带传动 节线位置的动态测定 V-and ribbed belt--Dynamic test to determine Pitch zone location
扁圆头击芯铆钉 Flat round head drive rivets
沉头击芯铆钉 Countersunk head drive rivets
击芯铆钉技术条件 Specifications for drive rivets
十字槽盘头自钻自攻螺钉 Cross recessed pan head self-drilling tapping screws
十字槽沉头自钻自攻螺钉 Cross recessed countersunk head self-drilling tapping screws
十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head self-drilling tapping screws
六角法兰面自钻自攻螺钉 Hexagon flange head self-drilling tapping screws
平面二次包络环面蜗杆传动术语 Planar double-enveloping worm gearing terminology
平面二次包络环面蜗杆传动几何要素代号 Planar double--enveloping worm gearing geometrical data symbols
平面二次包络环面蜗杆减速器系列、润滑和承载能力 Planar double-enveloping worm gearsreducer-dimensions and load capacitys
平面二次包络环面蜗杆传动精度 Planar double-enveloping worm gearing accuracy
平面二次包络环面蜗杆减速器技术条件 Planar double-enveloping worm gearing reducer technical specification
工业用多楔带及带轮尺寸 (PH、PJ、PK、PL和PM型 ) V-ribbed belts and pulleys for industrial applications--Dimensions (PH PJ PK PL and PM profiles)
滚动轴承 滚针和推力圆柱滚子组合轴承 外形尺寸 Rolling bearings--Combined needle roller thrust roller bearings--Boundary dimensions
六角法兰面螺栓 小系列 Hexagon flange bolts--Small series
滑动轴承 金属轴承材料的压缩试验 Plain bearings--Compression testing of metallic bearing materials
螺纹紧固件应力截面积和承载面积 Stress area and bearing area for threaded fasteners
螺纹紧固件紧固通则 General rules of tightening for threaded fasteners
螺纹紧固件拧紧试验方法 Method of tightening test for threaded fasteners
六角凸缘自攻螺钉 Hexagon head tapping screws with collar
六角法兰面自攻螺钉 Hexagon flange head tapping screws
直廓环面蜗杆、蜗轮精度 Accuracy of double enveloping worm gearing with straight line generatrix
机械振动 轴与配合件平衡的键准则 Mechanical vibration--Balancing--Shaft and fitment key convention
薄型楔键及其键槽 Thin taper reys and their corresponding keyways
紧固件 螺栓、螺钉、螺柱和螺母通用技术条件 Fasteners--General requirements for blots,screws,studs and nuts
钢网架螺栓球节点用高强度螺栓 High strength bolts for joints of space grid structures
直线运动支承 直线运动球轴承 外形尺寸和公差 Linear motion bearings--Linear motion ball bearings--Boundary dimensions and tolerances
螺旋弹簧疲劳试验规范 Helical springs fatigue testing standard
管道支吊架 第1部分; 技术规范 Pipe supports and hangers--Part 1: Technical specification
管道支吊架 第2部分: 管道连接部件 Pipe supports and hangers--Part 2: Pipe attachments
管道支吊架 第3部分: 中间连接件和建筑结构连接件 Pipe supports and hangers--Part 3: Middle connection attachments and building structure attachments
带传动 联组普通V带轮(有效宽度制) Belt drives--Grooved pulleys for joined classical V-belts (effective system)
花键承载能力计算方法 Calculation of load capacity of spline
齿轮 磨削后表面回火的浸蚀检验 Gears--Surface temper etch inspection after grinding
平头铆螺母 Flat head riveted nuts
沉头铆螺母 Countersunk head riveted nuts
小沉头铆螺母 Small countersunk head riveted nuts
120°小沉头铆螺母 120°Small countersunk head riveted nuts
平头六角铆螺母 Flat head hexagon riveted nuts
铆螺母技术条件 Specifications for riveted nuts
滚子链传动选择指导 Guidance on the selection of roller chain drives
铆钉杆径 Rivet shank diameters
精密机械用六角螺母 Hexagon nuts for fine mechanics--Product grade F
栓接结构用大六角头螺栓螺纹长度按GB/T 3106 C级8.8和10.9级 Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C-Property classes 8.8 and 10.9
栓接结构用大六角头螺栓 短螺纹长度C级8.8和10.9级 Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)--Product grade C-Property classes 8.8 and 10.9
栓接结构用大六角螺母 B级 8和10级 Hexagon nuts for high-strength structural bolting with large width across flats--Product grade B-Property classes 8 and 10
栓接结构用1型大六角螺母 B级 10级 Hexagon nuts for structural bolting with large width across flats,style 1--Product grade B-Property class 10
栓接结构用平垫圈 淬火并回火 Plain washers for high-strength structural bolting hardened and tempered
栓接结构用1型六角螺母 热浸镀锌(加大攻丝尺寸) A和B级 5、6和8级 Hexagon nuts for structural bolting style 1 hot-dip galvanized (oversize tapped)--Product grades A and B-Property classes 5,6 and 8
栓接结构用2型六角螺母 热浸镀锌(加大攻丝尺寸)A级 9级 Hexagon nuts for structural bolting-style 2,hot-dip galvanized(oversize tapped)--Product grade A--Property class 9
滑动轴承 烧结轴套的尺寸和公差 Plain bearings--Sintered bushes--Dimensions and tolerances
滑动轴承 铜合金轴套 Plain bearings--Copper alloy bushes
滑动轴承 流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度 Plain bearings--Bearing fatigue--Plain bearings in test rigs and in application under conditions of hydrodynamic lubrication
滑动轴承 薄壁滑动轴承用金属多层材料 Plain bearings--Multilayer materials for thin-walled plain bearings
滑动轴承 基本符号 Plain bearings--Basic symbols
滑动轴承 应用符号 Plain bearings--Applications
滑动轴承 多层金属滑动轴承结合强度的超声波无损检验 Plain bearings--Non-destructive ultrasonic testing of hond for metallic multilayer plain bearings
滑动轴承 薄壁轴瓦和薄壁轴套的壁厚测量 Plain bearings--Measurement of wall thickness of thin-walled half-bearings and thin-walled bushes
滑动轴承 卷制轴套外径的检测 Plain bearings--Checking the outside diameter for wrapped bushes
钢制压力容器 Steel pressure vessels
管壳式换热器 Tubular heat exchangers
管道元件的公称通径 Nominal size for pipe components
管道元件公称压力 Nominal pressure for pipe components
压缩空气用橡胶软管 (2.5 Mpa 以下) Rubber hose for compressed air (up to 2.5 Mpa)
工业通风机 用标准化风道进行性能试验 Industrial fans--Performance testing using standardized airways
船用外螺纹锻钢截止止回阀 Marine forged steel male thread stop and check valves
铜及铜合金拉制管 Drawn tube of copper and copper alloys
铜及铜合金毛细管 Capillary tube of copper and copper alloys
工业蒸汽锅炉 参数系列 Specifications for industrial steam boiler
液压气动系统及元件 公称压力系列 Fluid power systems and components--Nominal pressures
液压泵及马达公称排量系列 Hydraulic fluid power--Pumps and motors -- Geometric displacements
液压气动系统及元件 缸内径及活塞杆外径 Fluid power systems and components--Cylinder bores and piston rod diameters
液压气动系统及元件 缸活塞行程系列 Fluid power systems and components--Cylinders--Basic series of piston strokes
液压气动系统及元件 活塞杆螺纹型式和尺寸系列 Fluid power systems and components--Cylinders--Piston rod thread dimensions and types
液压气动系统用硬管外径和软管内径 Fluid power systems and components--Connectors and associated components--Outside diameters of tubes and inside diameters of hoses
液压传动 隔离式蓄能器 压力和容积范围、特征量及标识 Hydraulic fluid power--Gas-loaded accumulators with separators--Range of pressures and volumes,characteristic quantities and identification
液压泵和马达 安装法兰和轴伸的尺寸系列及标记 第一部分: 二孔和四孔法兰和轴伸 Hydraulic fluid power--Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft ends--Part 1: Two-and four-hole flanges and shaft ends
液压泵和马达 安装法兰与轴伸的尺寸系列和标记(二) 多边形法兰(包括圆形法兰) Hydraulic fluid power--Positive displacement pumps and motors--Dimensions and identification code for mounting flanges and shaft ends--Part 2: Polygonal flanges(including circular flanges)
四油口板式液压方向控制阀安装面 Hydraulic fluid power--Four-port directional control valves--Mounting surfaces
焊接及切割用橡胶软管 氧气橡胶软管 Specification for hose for equipment for gas welding, cutting and related processes - Oxygen rubber hose
焊接及切割用橡胶软管 乙炔橡胶软管 Specification for hose for equipment for gas welding, cutting and related processes - Acetylene rubber hose
一般用途管法兰连接尺寸 Pipe flange connectors for ordinary use--Mounting dimensions
一般用途管法兰密封面形状和尺寸 Pipe flanges for ordinary use--Sealing surfaces--Forms and dimensions
小型交流风通用机技术条件 A.C. miniature blowers, general specification for
井用潜水泵技术条件 Specification for submersible pumps for deep well
二通插装式液压阀安装连接尺寸 Hydraulic fluid power--Two-port slip-in cartridge valves cavities--Mounting dimensions
液压元件螺纹连接 油口型式和尺寸 Fluid power systems and components--Ports--Dimensions and design
液压缸活塞和活塞杆 动密封沟槽型式、尺寸和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings
液压缸活塞和活塞杆 窄断面动密封沟槽尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications--Dimensions and tolerances of housings--Narrow section series
镍及镍铜合金管 Nickel and nickel-copper alloy tube
石棉水泥输水管及其接头 Asbestos-cement pressure pipes and joints for water
石棉水泥输煤气管 Asbestos-cement pressure pipe for gas transmission
石棉水泥井管 Asbestos-cement pipe for well casing
不锈耐酸钢极薄壁无缝钢管 Thinnest-wall seamless tubes of stainless and acid-resistance steel
低压流体输送用焊接钢管 Welded steel pipe for low pressure liquid delively
真空技术术语 Terminology for vacuum technology
真空技术系统图用图形符号 Vacuum technology--Graphical symbols
水泵流量的测定方法 Methods for measurement of capacity of pump
炼厂、化工及石油化工流程用离心泵通用技术条件 Centrifugal pumps for refinery, chemical and petrochemical processes--General technical specifications
离心泵、混流泵、轴流泵和旋涡泵试验方法 Test methods for centrifugal, mixed flow, axial and regenerative pumps
通风机基本型式、尺寸参数及性能曲线 Basic types sizes parameters and characteristics of fans
可锻铸铁管路连接件 Malleable cast iron pipe fittings
灰口铸铁管件 Gray iron castigs for pipe fittings
砂型离心铸铁管 Cast-iron pressure pipe centrifugally cast in sand-lined molds
连续铸铁管 Cast-iron pressure pipe made by continuous casting process
液压气动用O形橡胶密封圈尺寸系列及公差 Fluid systems--Sealing devices--O-rings--Inside diameters, cross-sections, tolerances and size identification code
O 形橡胶密封圈外观质量检验标准 Appearance quality acceptance criteria for rubber O-rings
液压气动用O形橡胶密封圈 沟漕尺寸和设计计算 Fluid power systems--O-ring--Design criteria for O-ring housing--Basic calculation
硬质合金顶锤与压缸 Anvils and high pressure cylinders made from cemented carbide
P3型镀锌金属软管 Type p3 galvanized metallic flexible hose
S型钎焊不锈钢金属软管 Type S brazed stainless steel flexible metallic hose
钢丝增强液压橡胶软管和软管组合件 Rubber hoses and hose assemblies--Wire reinforced hydraulic type
液压系统通用技术条件 Hydraulic fluid power--General rules relating to systems
容积式压缩机验收试验 Displacement compressor-Acceptance tests
液力传动术语 Hydrodynamic drive terminology
气动调节阀 Pneumatic industrial process control valves
流体输送用热塑性塑料管材 公称外径和公称压力 Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressures
化工用硬聚氯乙烯(PVC-U)管材 Unplasticized polyvinyl chloride (PVC-U) pipes for chemical industry
铝及铝合金管材外形尺寸及允许偏差 Wrought aluminium and aluminium alloy tubes--Dimensions and deviations
铝及铝合金热挤压管 第一部分: 无缝圆管 Aluminium and aluminium alloy extruded tubes--Part 1: Seamless tubes
缠绕式垫片水压密封性能试验方法 Spiral wound gaskets test method of hydraulic pressure sealing characteristics
缠绕式垫片蒸汽密封性能试验方法 Spiral wound gaskets test method of steam sealing characteristics
缠绕式垫片 分类 Specification and symbol of spiral wound gaskets
缠绕式垫片 管法兰尺寸系列 Dimensional series of spiral wound gaskets for pipe flanges
缠绕式垫片 技术条件 Specification of spiral wound gaskets
压缩机、凿岩机械与气动工具优先压力 Compressors, rock drilling machines and pneumatic tools - Preferred pressures
容积式压缩机术语 总则 Displacement compressors vocabulary--General
压缩机分类 Compressors--Classification
容积式压缩机噪声声功率级的测定--工程法 Determination of sound power level for noise emitted by displacement compressors--Engineering method
夹紧型真空快卸法兰 Vacuum technology clamped type quick release flange
拧紧型真空快卸法兰 Vacuum technology screwed type quick release flange
钢质无缝气瓶 Seamless steel gas cylinders
钢质焊接气瓶 Welded steel gas cylinders
高压锅炉用无缝钢管 Seamless steel tubes and pipes for high pressure boiler
橡胶、塑料软管及软管组合件 液压试验方法 Rubber and plastics hoses and hose assemblies--Hydrostatic testing
橡胶、塑料软管低温曲挠试验 Rubber and plastics hoses--Subambient temperature flexibility tests
橡胶或塑料软管及纯胶管 弯曲试验 Rubber or plastics hoses and tubing--Bending tests
胶管耐压扁试验方法 Rubber hose--Test method for crush resistance
橡胶、塑料软管及软管组合件 真空性能的测定 Rubber and plastics hoses and hose assemblies--Determination of suction resistance
橡胶、塑料软管及软管组合件 无屈挠液压脉冲试验 Rubber or plastics hoses and hose assemblies--Hydraulic impulse test without flexing
扩口式端直通管接头 Flared type tube fittings--Straight thread connector--Assembly
扩口式端直通管接头体 Flared type tube fittings--Straight thread connector--Body
扩口式锥螺纹直通管接头 Flared type tube fittings--Male connector--Assembly
扩口式锥螺纹直通管接头体 Flared type tube fittings--Male connector--Body
扩口式锥螺纹长管接头 Flared typed tube fittings--Straight taread long connector--Assembly
扩口式锥螺纹长管接头体 Flared type tube fittings--Straight thread long connector--Body
扩口式直通管接头 Flared type tube fittings--Union--Assembly
扩口式直通管接头体 Flared type tube fittings--Union--Body
扩口式锥螺纹直角管接头 Flared type tube fittings--Male elbow--Assembly
扩口式锥螺纹直角管接头体 Flared type tube fittings--Male elbow--Body
扩口式直角管接头 Flared type tube fittings--Union elbow--Assembly
扩口式直角管接头体 Flared type tube fittings--Union elbow--Body
扩口式可调向端直角管接头 Flared type tube fittings--Straight thread elbow-- Assembly
扩口式可调向端直角管接头体 Flared type tube fittings--Straight thread elbow--Body
扩口式组合直角管接头 Flared type tube fittings--Swivel elbow--Assembly
扩口式组合直角管接头体 Flared type tube fittings--Swivel elbow--Body
扩口式可调向端三通管接头 Flared type tube fittings--Straight thread branch tee--Assembly
扩口式可调向端三通管接头体 Flared type tube fittings--Straight thread branch tee --Body
扩口式组合直角三通管接头 Flared type tube fittings--Swivel run tee--Assembly
扩口式组合直角三通管接头体 Flared type tube fittings--Swivel run tee--Body
扩口式锥螺纹三通管接头 Flared type tube fittings--Male branch tee--Assembly
扩口式锥螺纹三通管接头体 Flared type tube fittings--Male branch tee--Body
扩口式变径锥螺纹三通管接头 Flared type tube fittings--Male branch tee reducer-- Assembly
扩口式变径锥螺纹三通管接头体 Flared type tube fittings--Male branch tee reducer--Body
扩口式可调向端直角三通管接头 Flared type tube fittings--Straight thread run tee-- Assembly
扩口式可调向端直角三通管接头体 Flared type tube fittings--Straight thread run tee-- Body
扩口式组合三通管接头 Flared type tube fittings--Swivel branch tee--Assembly
扩口式组合三通管接头体 Flared typed tube fittings--Swivel branch tee--Body
扩口式三通管接头 Flared type tube fittings--Union tee--Assembly
扩口式三通管接头体 Flared type tube fittings--Union tee--Boby
扩口式三通变径管接头 Flared type tube fittings--Union tee reducer--Assembly
扩口式三通变径管接头体 Flared type tube fittings--Union tee reducer--Body
扩口式四通管接头 Flared type tube fittings--Union cross--Assembly
扩口式四通管接头体 Flared type tube fittings--Union cross--Body
扩口式焊接管接头 Flared type tube fittings--Weld male connector--Assembly
扩口式焊接管接头体 Flared type tube fittings--Weld male connector--Body
扩口式隔壁直通管接头 Flared type tube fittings--Bulkhead union--Assembly
扩口式隔壁直通管接头体 Flared type tube fittings--Bulkhead union--Body
扩口式隔壁直角管接头 Flared type tube fittings--Bulkhead union elbow--Assembly
扩口式隔壁直角管接头体 Flared type tube fittings--Bulkhead union elbow--Body
扩口式压力表管接头 Flared type tube fittings--Connector for pressure gauge--Assembly
扩口式压力表管接头体 Flared type tube fittings--Connector for pressure gauge--Body
扩口式管接头管套 Flared type tube fittings--Sleeve
扩口式 A 型管接头螺母 Flared type tube fittings--Style A nut
扩口式 B 型管接头螺母 Flared type tube fittings--Style B nut
扩口式管接头锁紧螺母 Flared type tube fittings--Locknut
扩口式管接头空心螺栓 Flared type tube fittings--Inverted flare bolts
扩口式管接头密合垫 Flared type tube fittings--Seat insert
扩口式管接头锁紧螺母垫圈 Flared type tube fittings--Back-up washer
扩口式管接头技术条件 Specification for flared type tube fittings
离心泵技术条件(II类) Technical specifications for centrifugal pumps--Class II
离心泵技术条件(Ⅲ类) Technical specifications for centrifugal pumps--Class Ⅲ
轴向吸入离心泵底座尺寸和安装尺寸 End-suction centrifugal pumps--Baseplate and installation dimensions
轴向吸入离心泵机械密封和软填料用的空腔尺寸 End-suction centrifugal pumps--Dimensions of cavities for mechanical seals and for soft packing
轴向吸入离心泵 (16 bar) 标记、性能和尺寸 End-suction centrifugalpumps (rating 16 bar)--Designation, nominal duty point and dimensions
预应力混凝土输水管 (震动挤压工艺) Prestressed vibrohydropressed concrete pipe for water
预应力混凝土输水管(管芯缠丝工艺) Core type prestressed concrete pipe for water
容积式制冷压缩机性能试验方法 The methods of performance test for positive displacement refrigerant compressors
建筑排水用硬聚氯乙烯管材 Unplastisized polyvinyl chloride pipes for drainage in buildings
建筑排水用硬聚氯乙烯管件 Unplasticized polyvinyl chloride fittings for drainage in buildings
液力偶合器 型式和基本参数 Fluid coupling--Types and basic specifications
液化石油气钢瓶 Liquefied petroleum gas cylinders
液压快换接头尺寸和要求 Hydraulic fluid power--Quick action couplings--Dimensions and requirements
液压快换接头试验方法 Hydraulic fluid power--Quick action couplings--Test methods
纤维缠绕压力容器制备和内压试验方法 Method for preparation and internal pressure testing of filament wound pressure vessels
真空法兰 Vacuum flanges
超高真空法兰结构型式 Ultra-high vacuum flange--Types
超高真空法兰尺寸 Ultra-high vacuum flange--Dimensions
超高真空法兰用铜密封垫 Ultra-high vacuum flange--Copper seal gaskets
长期恒定内压下热塑性塑料管材耐破坏时间的测定方法 Standard test method for time-to-failure of thermoplastic pipe under constant internal pressure
柔性机械接口灰口铸铁管 Soft mechanical joint grey cast iron pipe
水轮泵名词术语及定义 Terms and definitions of water-turbine pumps
水轮泵试验方法 Testing methods of water-turbine pump
水轮泵型式与基本参数 Types and basic parameters of water-turbine pump
液压缸活塞用带支承环密封沟槽型式、尺寸和公差 Hydraulic fluid power--Cylinders--Piston seal housings incorporating bearing rings--Dimensions and tolerances
液压缸活塞杆用防尘圈沟槽型式、尺寸和公差 Hydraulic fluid power--Cylinders--Reciprocating--Housings for rod wipers--Dimensions and tolerances
热塑性塑料管材 纵向回缩率的测定 Thermoplastics pipes-Determination of longitudinal reversion
袋式除尘器分类及规格性能表示方法 Classification and specification for bag filters
双涡轮液力变矩器主要参数 Basic parameters of double-turbine torque converter
消防吸水胶管性能要求和试验方法 Rubber suction hose for fire-fighting purpose performance requirements and test methods
离心泵名词术语 Glossary of terms for centrifugal pump
容积式压缩机噪声声功率级的测定 简易法 Determination of sound power level for noise emitted by displacement compressors--Survey method
使用非石油基制动液的道路车辆 液压制动系统用制动软管组合件 Brake hose assemblies for hydraulic braking systems of road vehicles used with non-petroleum-base brake fluid
使用石油基制动液的道路车辆 液压制动系统用制动软管组合件 Brake hose assemblies for hydraulic braking systems of road vehicles used with petroleum-base brake fluid
橡胶或塑料软管 容积膨胀的测定 Rubber or plastics hoses--Determination of volumetric expansion
气瓶颜色标志 Coloured cylinder mark for gases
热塑性塑料管材及管件密度的测定 第Ⅰ部分: 聚乙烯管材及管件基准密度的测定 Determination of density of thermoplastic pipes and fittings--Part Ⅰ: Determination of reference density of polyethylene pipes and fittings
热塑性塑料管材及管件密度的测定 第Ⅱ部分: 聚丙烯管材及管件密度的测定 Determination of density of thermoplastic pipes and fittings--Part Ⅱ: Determination of density of polypropylene pipes and fittings
工业管路的基本识别色和识别符号 Basic identification colours and code indications for industrial pipelines
液化石油气瓶阀 Valves for liquefied petroleum gas cylinders
橡胶软管术语 Rubber hose--Glossary of terms
涡轮分子泵性能测试方法 Methods of measurement of the performance characteristics of tubo-molecular pumps
往复活塞压缩机机械振动测量与评价 Measurement and evluation of mechanical vibration of reciprocating piston compressors
计量泵 Metering pump
机动往复泵试验方法 Method of testing power reciprocating pump
往复泵分类和名词术语 Classification and vocabulary for reciprocating pump
往复活塞空气压缩机基本参数 Reciprocating piston air compressors--Basic parameters
焊接、切割及类似工艺用气瓶减压器 Regulators for gas cylinders used in welding, cutting and allied processes
气动系统通用技术条件 Pneumatic fluid power--General rules for the application of equipment to transmission and control systems
二通插装式液压阀 技术条件 Hydraulic fluid power--Two-port slip-in cartridge valves--Cavities--Technical requirements
液压元件通用技术条件 Hydraulic fluid power--General rules of technical requirements for hydraulic components
液压泵、马达空载排量 测定方法 Hydraulic fluid power--Positive displacement pumps andmotors--Determination of derived capacity
液压气动用管接头及其附件公称压力系列 Fluid power systems and components--Connectors and associated components--Nominal pressures
液压缸及气缸公称压力系列 Fluid power systems and components--Cylinders--Nominal pressures
液压软管总成 试验方法 Hydraulic fluid power--Hose assemblies--Method of test
气动 五气口方向控制阀 第一部分: 不带电气接头的安装面 Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector
气动 五气口方向控制阀 第二部分 带电气接头的安装面 Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector
气动 五气口方向控制阀 第三部分: 功能识别编码体系 Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions
板式液压流量控制阀安装面 Hydraulic fluid power--Compensated flow control valves--Mounting surfaces
液压叠加阀安装面 Hydraulic fluid power--Modular stack valves--Mounting surfaces
板式联接液压压力控制阀(不包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀 安装面 Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ), sequence valves, unloading valves, throttle valves and check valves--Mounting surfaces
板式连接液压溢流阀安装面 Hydraulic fluid power-pressure relief valves--Mounting surfaces
缸内径8~25mm的单杆气缸安装尺寸 Pneumatic fluid power--Single rod cylinders--Bores from 8 to 25 mm--Mounting dimensions
流量控制阀试验方法 Hydraulic fluid power--Valves--Testing method of flow control valves
压力控制阀试验方法 Hydraulic fluid power--Valves--Testing method of pressure control valves
方向控制阀试验方法 Hydraulic fluid power--Valves--Testing method of directional control valves
液压阀压差 流量特性试验方法 Hydraulic fluid power--Valves--Method of determining pressure diffrential--Flow characteristics
卡箍式柔性管接头技术条件 Specification for flexible coupling of housing
卡箍式柔性环型管接头 Flexible coupling of housing for pipe end with rib ring
卡箍式柔性肩型管接头 Flexible coupling of housing for pipe end with shoulder
液化石油气钢瓶定期检验与评定 Periodic inspection and evaluation of liquefied petroleum gas steel cylinders
气瓶专用螺纹 Special threads for gas cylinders
气瓶专用螺纹量规 Special thread gauges for gas cylinders
气瓶用易熔合金塞 Fusible plug for gas cylinders
水嘴分类、型号命名方法 Classification and type nomenclature for taps
水暖用内螺纹连接阀门 Valves with female screw ends for water-heating system
液压快换接头 螺纹连接尺寸及要求 Hydlaulic fluid power--Quick action couplings--Thread connecting dimensions
液压和气动缸筒用精密内径无缝钢管 Inside diameter required precision seamless steel tube for hydraulic and pneumatic cylinder use
梯唇型橡胶圈接口铸铁管 Grey cast iron pipes with rubber ring of ladder-lip-shaped
柔性机械接口铸铁管件 Soft mechanical joint grey cast iron fittings
硬聚氯乙烯 (PVC-U) 管件坠落试验方法 Test method for unplasticized (PVC-U) fittings by falling
热塑性塑料管材、管件 维卡软化温度的测定 Thermoplastics pipes and fitting-Determination of vicat softening temperature
注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings Hot oven test method
热塑性塑料管材拉伸性能试验方法 聚氯乙烯管材 Test methods of tensile properties for thermoplastic pipes--Polyvinyl chloride (PVC) pipes
热塑性塑料管材拉伸性能试验方法 聚乙烯管材 Test methods of tensile properties for thermoplastic pipes--Polyethylene (PE) pipes
硬质塑料管材弯曲度测量方法 Determination of deflection for rigid plastic pipes
塑料管材尺寸测量方法 Method for dimension measuring of plastic pipes
热交换器用铜合金无缝管 Seamless copper alloy tube for condenser and heat-exchanger
压力表用锡青铜管 Bronze tube for pressure-gauge
矩形和方形铜及铜合金波导管 Copper and copper alloys--Rectangular and square waveguid tube
圆形铜合金波导管 Copper and copper alloys--Circular waveguid tube
压力容器公称直径 Nominal diameter of pressure vessels
液压软管接头 连接尺寸 扩口式 Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅰ--Flare type)
液压软管接头 连接尺寸 卡套式 Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅱ--Insert type)
液压软管接头 连接尺寸 焊接式或快换式 Hydraulic fluid power--Hose connector--Connecting dimension (Part Ⅲ--Welding or quick-action type)
无管芯重力热管铝管材 Aluminium tubes used for wickless gravity heat pipes
铝无管芯重力热管 Wickless aluminium gravity heat pipes
液压缸气缸 安装尺寸和安装型式代号 Fluid power systems and components--Cylinders--Identification code for mounting dimensions and mounting types
电冰箱用全封闭型电动机--压缩机 Hermetic motor-compressors for refrigerators
钢制管法兰 类型与参数 Types and parameters for steel pipe flanges
平面、突面整体钢制管法兰 Intergral steel pipe flanges with flat face or raised face
凹凸面整体钢制管法兰 Integral steel pipe flanges with male and female face
榫槽面整体钢制管法兰 Integral steel pipe flanges with tongue and groove face
环连接面整体钢制管法兰 Integral steel pipe flanges with ring-joint face
突面带颈螺纹钢制管法兰 Hubbed screwed steel pipe flanges with raised face
平面、突面对焊钢制管法兰 Steel pipe welding neck flanges with flat face or raised face
凹凸面对焊钢制管法兰 Steel pipe welding neck flanges with male and female face
榫槽面对焊钢制管法兰 Steel pipe welding neck flanges with tongue and groove face
环连接面对焊钢制管法兰 Steel pipe welding neck flanges with ring-joint face
凹凸面带颈平焊钢制管法兰 Hubbed slip-on-welding steel pipe flanges with male and female face
榫槽面带颈平焊钢制管法兰 Hubbed slip-on-welding steel pipe flanges with tongue and groove face
环连接面带颈平焊钢制管法兰 Hubbed slip-on-welding steel pipe flanges with ring-joint face
突面带颈承插焊钢制管法兰 Hubbed socket welding steel pipe flanges with raised face
凹凸面带颈承插焊钢制管法兰 Hubbed socket welding steel pipe flanges with male and female face
榫槽面带颈承插焊钢制管法兰 Hubbed socket welding steel pipe flanges with tongue and groove face
环连接面带颈承插焊钢制管法兰 Hubbed socket welding steel pipe flanges with ring-joint face
环连接面对焊环带颈松套钢制管法兰 Loose hubbed steel pipe flanges with welding neck collar with ring-joint face
突面对焊环带颈松套钢制管法兰 Loose hubbed steel pipe flanges with welding neck collar with raised face
平面、突面板式平焊钢制管法兰 Slip-on-welding plate steel pipe flanges with flate face or raised face
突面对焊环板式松套钢制管法兰 Loose plate steel pipe flanges with welding neck collar with raised face
凹凸面对焊环板式松套钢制管法兰 Loose plate steel pipe flanges with welding neck collar with male and female face
榫槽面对焊环板式松套钢制管法兰 Loose plate steel pipe flanges with welding neck collar with tongue and groove face
突面平焊环板式松套钢制管法兰 Loose plate steel pipe flanges with weld-on collar with raised face
凹凸面平焊环板式松套钢制管法兰 Loose plate steel pipe flanges with weld-on collar with male and female face
榫槽面平焊环板式松套钢制管法兰 Loose plate steel pipe flanges with weld-on collar with tongue and groove face
翻边环板式松套钢制管法兰 Loose plate steel pipe flanges with lapped end
平面、突面钢制管法兰盖 Steel pipe blank flanges with flat face or raised face
凹凸面钢制管法兰盖 Steel pipe blank flanges with male and female face
榫槽面钢制管法兰盖 Steel pipe blank flanges with tongue and groove face
环连接面钢制管法兰盖 Steel pipe blank flanges with ring-joint face
钢制管法兰 技术条件 Specification for steel pipe flanges
平面型钢制管法兰用石棉橡胶垫片 Asbestos rubber gaskets for steel pipe flanges with full face
凸面型钢制管法兰用石棉橡胶垫片 Asbestos rubber gaskets for steel pipe flanges with raised face
凹凸面型钢制管法兰用石棉橡胶垫片 Asbestos rubber gaskets for steel pipe flanges with male and female face
榫槽面型钢制管法兰用石棉橡胶垫片 Asbestos rubber gaskets for steel pipe flanges with tongue and groove face
钢制管法兰连接用八角形金属环垫 Octagonal metallic ring gaskets for steel pipe flanges joints
钢制管法兰连接用椭圆形金属环垫 Oval metallic ring gaskets for steel pipe flange joints
钢制管法兰用石棉橡胶垫片技术条件 Specification for asbestos rubber gaskets for steel pipe flanges
钢制管法兰连接用金属环垫技术条件 Specification for metallic ring gaskets for steel pipe flange joints
平面、突面带颈平焊钢制管法兰 Hubbed slip-on-welding steel pipe flanges with flate face or raised face
机动往复泵 Power reciprocating pump
蒸汽往复泵试验方法 Testing methods of steam reciprocating pump
气瓶水压试验方法 Method for hydraulic test of gas cylinders
气瓶疲劳试验方法 Method for cycling test of gas cylinders
中小型轴流泵 型式与基本尺寸 Axial-flow pump of medium-small size--Types and basic parameters
橡胶和塑料软管及软管组合件 电阻的测定 Rubber and plastics hoses and hose assemblies--Determination of electrical resistance
橡胶、塑料软管和软管组合件尺寸测量方法 Rubber and plastics hoses and hose assemblies--Methods of measurement of dimensions
橡胶和塑料软管及软管组合件 试验压力、爆破压力与设计工作压力的比率 Rubber and plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure
橡胶、塑料软管内径尺寸和长度公差 Rubber and plastics hoses--Bore diameters and tolerances on length
橡胶和塑料软管及软管组合件 选择、贮存、使用和维护指南 Rubber and plastics hose and hose assemblies--Guide to selection,use,and maintenance
橡胶和塑料软管及软管组合件 标志、包装和运输规则 Rubber and plastics hose and hose assemblies--Rules for marking,package and transportation
聚乙烯(PE)管材和管件 根据聚乙烯公称密度和熔体流动速率命名的方法 Polyethylene (PE) pipes and fittings--Designation of polyethylene based on nominal density and melt flow rate
聚乙烯(PE)管材和管件 熔体流动速率试验方法 Polyethylene (PE) pipes and fittings--Determination ofmelt flow rate
硬聚氯乙烯(PVC-U) 饮水管材和管件 铅、锡、镉、汞的萃取方法及允许值 Unplasticized polyvinyl chloride (PVC-U) pipes and fittings for drinking water supply--Extractability of lead, tin, cadmium and mercury occurring as impurities--Test method and pemitted levels
硬聚氯乙烯(PVC-U)管材吸水性试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of water absorption
硬聚氯乙烯(PVC-U)管材耐丙酮性试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes--Determination of resistance to acetone
塑料管材耐外负荷试验方法 Test method for external loading resistance for plastic pipe
石油裂化用无缝钢管 Seamless steel tubes for petroleum cracking
给水用硬聚氯乙烯(PVC-U)管材 Unplasticized polyvinyl chloride (PVC-U) pipe for water supply
埋地排污、废水用硬聚氯乙烯(PVC-U)管材 Unplasticized poly vinyl chlorid (PVC-U) pipes for buried drainage and sewerage systems
医用软聚氯乙烯管材 Plasticized polyvinyl chloride (PVC)tubing for medical uses
活塞式单级制冷压缩机 Single-stage reciprocating refrigerant compressors
空调用通风机安全要求 Safety requirements of fan for air conditioning
通风机现场试验 Site testing of fams
近海停泊排吸油橡胶软管的分类、规格和基本技术要求 Classification, dimension and basic requirements for rubber hose - Oil suction and discharge - Offshore mooring
飞机地面加油和泄油用橡胶软管 Rubber hoses for aircraft ground fuelling and defuelling
钢丝缠绕增强外覆橡胶的液压橡胶软管和软管组合件 Rubber hoses and hose assemblies - Rubber-covered,spiral wire reinforced, hydraulic type - Specification
液化石油气 (LPG) 橡胶软管 Liquid petroleum gas rubber hose
热塑性塑料管材通用壁厚表 Thermoplastics pipes-Universal wall thickness table
氧气瓶阀 Valves for oxygen cylinders
气瓶锥螺纹丝锥 Special taps of taper threads for gas cylinders
溶解乙炔气瓶阀 Valves for dissolved acetylene cylinders
三螺杆泵型式与基本参数 Types and basic parameters of three screw pumps
三螺杆泵技术条件 Technical specifications of three screw pumps
空气处理机组安全要求 Safety requirements for air handling units
固定的空气压缩机 安全规则和操作规程 Stationary air compressors - Safety rules and code of practice
压缩空气干燥器 规范与试验 Compressed air dryers - Specifications and testing
离心式、混流式、轴流式水泵运行管理 Operational management of centrifugal, mixed flow and axial pumps
黄铜焊接管 Welded brass tube
真空镀膜设备通用技术条件 Vacuum coating plant generic specification
往复泵 型号编制方法 The model designation of reciprocating pump
溶解乙炔气瓶 Dissolved acetylene cylinders
溶解乙炔气瓶多孔填料技术指标测定方法 Methods of test for porous mass of dissolved acetylene cylinders
铝合金无缝气瓶 Seamless aluminium alloy gas cylinder
重水罐 Heavy water tank
电风扇电耗限定值及测试方法 The limited value of energy consumption of electric fans and it's measuring method
气瓶定期检验站技术条件 Technological specifications for periodic inspection station of gas cylinders
溶解乙炔气瓶用回火防止器 Arrester for dissolved acetylene cylinders
气瓶气密性试验方法 Method for pneumatic testing of cylinders
袋式除尘器性能测试方法 Measuring method for performance of bag filter
通用阀门 标志 General purpose industrial valves - Marking
法兰连接金属阀门 结构长度 Metal valves for use in flanged pipe systems - Face-to -face and centre-to-face dimensions
多回转阀门驱动装置的连接 Multi-turn valve actuator attachment
部分回转阀门驱动装置的连接 Part-turn valve actuator attachment
钢制阀门 一般要求 General requirements for industrial steel valves
通用阀门 铜合金铸件技术条件 General purpose industrial valves - Specification of copper alloy castings
通用阀门 灰铸铁件技术条件 General purpose industrial valves - Specification of flake graphite iron castings
通用阀门 球墨铸铁件技术条件 General purpose industrial valves - Specification of spheroidal graphite iron castings
通用阀门 碳素钢锻件技术条件 General purpose industrial valves - Specification of carbon steel forgings
通用阀门 碳素钢铸件技术条件 General purpose industrial valves - Specification of carbon steel castings
通用阀门 奥氏体钢铸件技术条件 General purpose industrial valves - Specification of austenitic steel castings
通用阀门 法兰连接铁制闸阀 General purpose industrial valves?Flanged iron gate valves
通用阀门 铁制截止阀与升降式止回阀 General purpose industrial valves - Casting iron globe valves and lift check valves
通用阀门 法兰和对焊连接钢制闸阀 General purpose industrial valves - Flanged and butt-weld steel gate valves
通用阀门 法兰连接钢制截止阀和升降式止回阀 General purpose industrial valves - Flanged steel globe valves and lift check valves
通用阀门 钢制旋启式止回阀 General purpose industrial valves - Steel swing check valves
通用阀门 法兰和对焊连接钢制球阀 General purpose industrial valves--Flanged and butt-weld end steel ball valves
通用阀门 法兰和对夹连接蝶阀 General purpose industrial valves - Flanged and wafer butterfly valves
通用阀门 隔膜阀 General purpose industrial valves - Diaphragm valves
通用阀门 铁制旋塞阀 General purpose industrial valves?Iron plug valves
安全阀 一般要求 Safety valves - General requirements
安全阀 性能试验方法 Performance test methods for safety valves
弹簧直接载荷式安全阀 Spring loaded safety valves
减压阀一般要求 General specification for pressure reducing valves
减压阀 性能试验方法 Methods of performance test for pressure reducing valves
先导式减压阀 Pilot-operated reducing valves
蒸汽疏水阀 分类 Automatic steam traps - Classification
蒸汽疏水阀 术语 Automatic steam traps - Definition of technical terms
蒸汽疏水阀 标志 Automatic steam traps - Marking
蒸汽疏水阀 结构长度 Automatic steam traps - Face-to-face dimensions
蒸汽疏水阀 试验方法 Automatic steam traps - Test methods
钢制球形储罐 Steel spherical tanks
管法兰用垫片密封性能试验方法 Test method for sealing characteristics of gaskets for pipe flanges
钢制对焊无缝管件 Steel butt-welding seamless pipe fittings
管法兰垫片 应力松弛试验方法 Test method for stress relaxation of gaskets for pipe flanges
管法兰垫片 压缩率及回弹率试验方法 Test method for compressibility and recorery of gaskets for pipe flanges
橡胶软管 外胶层耐磨耗性能的测定 Rubber hoses - Determination of abrasion resistance of the outer cover
橡胶和塑料软管组合件 屈挠液压脉冲试验(半Ω试验) Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (Half omega test)
机械结构用不锈钢焊接钢管 Welded stainless steel tubes for machine structure
流体输送用不锈钢焊接钢管 Welded stainless steel pipes for liquid delivery
排水用柔性接口铸铁管及管件 Cast iron pipes and fittings with flexible joint sewerage
潜水电泵试验方法 Test methods for submersible motor - Pumps
溶解乙炔气瓶气压试验方法 Method for pneumatic test of dissolved acetylene cylinders
钢质无缝气瓶定期检验与评定 Periodic inspection and evaluation of seamless steel gas cylinders
气瓶术语 Terminology of gas cylinders
离心泵、混流泵和轴流泵 汽蚀余量 NPSH for centrifugal, mixed flow and axial pumps
离心泵效率 Efficiencies for centrifugal pumps
混流泵、轴流泵技术条件 Technical specifications for mixed and axial flow pumps
聚乙烯(PE)管材 外径和壁厚极限偏差 Polyethylene (PE) pipes - Tolerances on outside diameters and wall thicknesses
聚丙烯(PP)管材 外径和壁厚极限偏差 Polypropylene (PP) pipes - Tolerances on outside diameters and wall thicknesses
硬聚氯乙烯(PVC-U) 管材 - 外径和壁厚极限偏差 Unplasticized polyvinyl chloride (PVC-U) pipes - Tolerances on outside diameters and wall thicknesses
钢质焊接气瓶定期检验与评定 Periodic inspection and evaluation of welded steel gas cylinders
溶解乙炔气瓶定期检验与评定 Periodic inspection and evaluation of dissolved acety lene cylinders
铝合金无缝气瓶定期检验与评定 Periodic inspection and evaluation of seamless aluminium alloy gas cylinders
石油和液体石油产品 立式圆筒形金属油罐容积标定法 (围尺法) Petroleum and liquid petroleum products - Volumetric calibration of vertical cylindrical metal tanks - Strapping method
石油和液体石油产品 立式圆筒形金属油罐容积标定法 (光学参比线法) Petroleum and liquid petroleum products - Volumetric calibration of vertical cylindrical metal tanks - Optical reference line method
一般用途轴流通风机技术条件 Technical specification for general purposes axiae fans
一般用途离心通风机技术条件 Technical specification for general purposes centrifugal fans
容积式空气压缩机进气滤清消声器 Intake filter silencers for displacement air compressors
一般用压缩空气质量等级 Compressed air for general use - Quality classes
一般用干螺杆空气压缩机技术条件 Dry screw air compressor for general use - Specifications
一般用固定式往复活塞空气压缩机技术条件 Stationary reciprocating piston air compressor for general use - Specifications
工艺流程用螺杆压缩机技术条件 Screw compressor for the process industry - Specifications
球墨铸铁管件 Ductile iron pipe fittings
离心铸造球墨铸铁管 Centrifugal casting ductile iron pipe
锅炉、热交换器用不锈钢无缝钢管 Seamless stainless steel tubes for boiler and heat exchanger
混凝土泵 Concrete pump
往复泵机械振动测试方法 Measurement of mechanical vibration for reciprocating pump
钢板制对焊管件 Steel plate butt-welding pipe fittings
大直径碳钢管法兰 Large-diameter carbon steel pipe flanges
大直径碳钢管法兰用垫片 Gaskets for large-diameter cabon steel pipe flanges
管法兰用聚四氟乙烯包复垫片 Polytetrafluoroethylene envelope gaskets for pipe flanges
氩气瓶阀 Valves for argon cylinders
液氯瓶阀 Valves for liquid chlorine cylinders
无缝气瓶压扁试验方法 Method for flattening test of seamless gas cylinders
硬聚氯乙烯(PVC-U) 管材 二氯甲烷浸渍试验方法 Unplasticized polyvinyl chloride (PVC-U) pipes - Dichloromethane test
软聚氯乙烯管 (流体输送用) Plasticized polyvinyl chloride tubing for transport of fluids
软聚氯乙烯管 (电线绝缘用) Plasticized polyvinyl chloride tubing for elect rical insulation
低压输水灌溉用薄壁硬聚氯乙烯(PVC-U)管材 Thin wall unplasticized polyvinyl chloride (PVC-U) pipes for low-pressure conveyance in irrigation
直缝电焊钢管 Longitudinal electric resistance welded steel tubes
通用阀门 压力试验 Pressure testing for general purpose valves
微型往复活塞空气压缩机 Reciprocating piston micro air compressor
水环真空泵和水环压缩机试验方法 Methods of testing for water-ring vacuum pumps and compressors
水环真空泵和水环压缩机气量测定方法 Methods for the measurement of volume flow of gas of water-ring vacuum pump and compressor
电除尘器 性能测试方法 Methods of performance tests for electrostatic precipitators
通用阀门铁制旋启式止回阀 General purpose industrial valves--Cast iron swing check valves
小型贯流式通风机 Miniature cross-flow fan
风力机设计通用要求 Design general requirements for wind energy conversion system
24°非扩口液压管接头连接尺寸 Hydraulic fluid power--Connection for tubes and hoses--Dimensions and designs for 24°flareless fittings
液压缸活塞杆端带关节轴承耳环安装尺寸 Hydraulic fluid power--Cylinders--Rod end spherical eyes--Mounting dimensions
气缸气口螺纹 Pneumatic fluid power--Cylinders--Bore and port thread sizes
液压系统工作介质固体颗粒污染等级代号 Hydraulic fluid power--Fluids--Method for coding level of contamination by solid particles
液压滤芯结构完整性检验方法 Hydraulic fluid power--Filter elements--Verification of fabrication integrity
液压滤芯材料与液体相容性检验方法 Hydraulic fluid power--Filter elements--Verification of material compatibility with fluids
液压滤芯抗破裂性检验方法 Hydraulic fluid power--Filter elements--Verification of collapse/burst resistance
液压滤芯额定轴向载荷检验方法 Hydraulic fluid power--Filter elements--Method for end load test
液压缸活塞杆端柱销式耳环安装尺寸 Hydraulic fluid power--Cylinders--Rod end plain eyes--Mounting dimensions
喷油泵试验台 试验方法 Method for testing fuel injection pump test-stand
热塑性塑料管材耐外冲击性能试验方法 时针旋转法 Thermoplastics pipes-Determination of resistance to external blows-Round-the-clock method
液化气体气瓶充装规定 Rules for filling of liquefied gas cylinders
永久气体气瓶充装规定 Rules for filling of permanent gas cylinders
矿用流体输送电焊钢管 Welded steel pipe for mine liquid service
组合式空调机组 Central-station air handling units
空气过滤器 Air filter
空气冷却器与空气加热器 Air cooling and air heating coils
管道用三通过滤器 Tee strainers for fluids for pipes
锻钢制承插焊管件 Forged steel socket welding pipe fittings
大中型水轮机进水阀门基本技术条件 Fundamental technical requirements for large and medium inlet valves of hydraulic turbine
气动元件流量特性的测定 Pneumatic fluid power--Determination of flow rate characteristics of pneumatic components
气动管接头试验方法 Pneumatic fluid power--Tube fittings--Test methods
气动快换接头试验方法 Pneumatic fluid power--Quick action couplings--Test methods
波纹金属软管通用技术条件 General specification for corrugated metallic hose assemblies
正拱形金属爆破片型式与参数 Specification and type for conventional domed metallic bursting discs
反拱形金属爆破片型式与参数 Specification and type for reverse domed metallic bursting discs
锻钢制螺纹管件 Forged steel threaded pipe fittings
蒸汽往复泵 Steam reciprocating pump
家用和类似用途的交流换气扇及其调速器 A.C.electric ventilating fans and regulators for household and similar purposes
钢丝增强的橡胶、塑料软管和软管组合件 屈挠液压脉冲试验 Rubber and plastics hose and hose assemblies--Wire reinforced--Hydraulic impulse test with flexing
橡胶和塑料软管各层间粘合强度测定 Rubber and plastics hose--Determination of adhesion between components
结构用不锈钢无缝钢管 Stainless steel seamless tubes for structures
流体输送用不锈钢无缝钢管 Stainless steel seamless pipes for fluid transport
球形金属罐容积标定法(围尺法) Capacity calibration of spherical metal tanks--Strapping method
铁制和铜制球阀 Cast iron and copper alloy ball valves
湿式除尘器性能测定方法 Measuring method for performance of wet dust collectors
阀门的结构长度 对焊连接阀门 Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Buttwelding valves
阀门的结构长度 对夹连接阀门 Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Wafer valves
阀门的结构长度 内螺纹连接阀门 Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves--Female screw valves
阀门的结构长度 外螺纹连接阀门 Face-to-face, centre-to-face, end-to-end and centre-to end dimensions of valves--Mals screw valves
液压缸活塞和活塞杆动密封装置用同轴密封件尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of co-axial seals--Dimensions and tolerances
液压缸活塞和活塞杆动密封装置用支承环尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances
液压缸活塞和活塞杆动密封装置用同轴密封件安装沟槽尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of Co-axial seals--Dimensions and tolerances of housings
液压缸活塞和活塞杆动密封装置用支承环安装沟槽尺寸系列和公差 Hydraulic fluid power--Cylinder rod and piston seals for reciprocating applications of bearing rings--Dimensions and tolerances of housings
织物增强液压橡胶软管和软管组合件 Rubber hoses and hose assemblies-Textile-reinforced hydraulic type
预应力混凝土输水管检验方法 Inspection methods of prestressed concrete pipes for water
小容积液化石油气钢瓶 Liquefied petroleum gas steel mini-cylinders
气瓶阀通用技术条件 General technique specifications for cylinder valves
气瓶阀出气口连接型式和尺寸 Outlet connections and sizes for cylinder valves
气瓶型号命名方法 Designation for gas cylinders
气瓶水压爆破试验方法 Method for hydraulic burst test of gas cylinders
反击式水轮机空蚀评定 Cavitation pitting evaluation in reaction hydraulic turbines
管法兰用金属包覆垫片 Metallic envelope gaskets for pipe flanges
液压缸试验方法 Hydraulic fluid power--Cylinders-test method
房间空气调节器用全封闭型电动机--压缩机 Hermetic motor--compressors for room air conditioners
灌溉支管用聚乙烯(PE)25管材 由插入式管件引起环境应力开裂敏感性的试验方法和技术要求 Test method and specifications of susceptibility for environmental stress-cracking induced by insert type fittings in low density polyethylene (PE)25 pipes for irrigation laterals
聚乙烯压力管材与管件连接的耐拉拔试验 Test of resistance to pull out of joints between polyethylene (PE) pressure pipes and fittings
橡胶、塑料软管 燃烧试验方法 Rubber and plastics hoses--Method of test for flammability
织物增强液压型热塑性塑料软管和软管组合件 Plastics hose and hose assemblies--Thermoplastics, textile-reinforced, hydraulic type
手工打结地毯绒头长度的试验方法 Hand-knotted carpet--Determination of length of pile
瓶装压缩气体分类 Classificetion of cylinder compressed gases
小容积溶解乙炔气瓶 Small volume dissolved acetylene cylinders
爆破片装置夹持器型式和外形尺寸 Bursting disc devices--Type and outline dimensions holders
板式换热器 Plate heat exchanger
便携式用丁烷气瓶 Butane cylinders for portable butane cooker
软管快速接头 Quick hose' s connection
真空技术 管路配件 装配尺寸 Vacuum technology--Pipeline fittings--Mounting dimensions
压力容器波形膨胀节 Bellows expansion joints for pressure vessel
混凝土和钢筋混凝土排水管试验方法 Test methods of concrete and reinforced concrete drainage and sewer pipes
自增压式液氮容器 Autoboosting calibre liquid nitrogen container
低温容器漏气速率测定方法 Test methods for leak rate of cryogenic containers
排水用芯层发泡硬聚氯乙烯(PVC-U)管材 Unplasticized polyvinyl chloride (PVC-U) pipes with a cellular core for drainage and sewerage systems
气瓶警示标签 Precautionary labels for gas cylinders
液体石油管道压力试验 Pressure testing of liquid petroleum pipelines
离心泵技术条件(I类) Technical specifications for centrifugal pumps--Class I
气瓶用爆破片技术条件 Bursting discs specification for gas cylinders
流程工业用透平压缩机 设计、制造规范与数据表 Compressors for the process industry--Turbo types--Specifications and data sheets for their design and construction
钢制法兰管件 Steel pipe fittings for flanged joint
钢制管法兰连接强度计算方法 Calculating method for the strength of steel pipe flanged joint
工业过程控制阀 第1部分: 控制阀术语和总则 Industrial--Process control valves Part 1: Control valve terminology and general considerations
工业过程控制阀 第5部分: 标志 Industrial-process control valves Part 5: Marking
工业过程控制阀 第7部分: 控制阀数据单 Industrial-process control valves Part 7: Control valve data sheet
工业过程控制阀 第8部分: 噪声的考虑 第1节: 实验室内测量空气动力流流径控制阀产生的噪声 Industrial-process control valves Part 8: Noise considerations Section 1: Laboratory measurement of noise generated by aerodynamic flow through control valves
铸铁管法兰 类型 Synotic table for cast iron pipe flanges
铸铁管法兰盖 Cast iron pipe blank flanges
带颈螺纹铸铁管法兰 Hubbed threaded cast iron pipe flanges
带颈平焊和带颈承插焊铸铁管法兰 Hubbed slip-on-welding and hubbed socket welding cast iron pipe flanges
管端翻边带颈松套铸铁管法兰 Loose hubbed cast iron pipe flanges for lapped pipe end
整体铸铁管法兰 Integral cast iron pipe flanges
铸铁管法兰 技术条件 Specifications for cast iron pipe flanges
汽车用压缩天然气钢瓶 Steel cylinders for the on--board of compressed natural gas as a fuel for vehicles
机动车用液化石油气钢瓶 Steel cylinders for the liquefied petroleum gas
钢制球形储罐型式与基本参数 Spherical tanks type and data base
工业用非重复充装焊接钢瓶 Non-refillable steel welded cylinder for industry cylinder
在用喷油泵试验台的校验 Calibrating rule of using fuel injection pump test-bench
流体传动系统及元件 术语 Fluid power systems and components--Vocabulary
球墨铸铁管 外表面喷锌涂层 Ductile iron pipes--External zinc-spray coating
球墨铸铁管 水泥砂浆离心法衬层 一般要求 Ductile iron pipes--Centrifugal cement mortar lining--General requirements
球墨铸铁管 水泥砂浆离心法衬层 新拌砂浆的成份检验 Ductile iron pipes--Centrifugal cement mortar lining--Composition controls of freshly applied mortar
球墨铸铁管 沥青涂层 Ductile iron pipes--Bitumen coating
液压泵空气传声噪声级测定规范 Test code for the determination of airborne noise level of hydraulic pumps
液压油液取样容器 净化方法的鉴定和控制 Hydraulic fluid power--Fluid sample containers--Qualifying and controlling cleaning methods
液压泵、马达和整体传动装置参数定义和字母符号 Hydraulic fluid power--Pumps,motors and integral transmissions--Parameter definitions and letter symbols
液压过滤器 压降流量特性的评定 Hydraulic fluid power--Filter--Evaluation of pressure drop versus flow characteristics
四油口和五油口液压伺服阀 安装面 Hydraulic fluid power--Four-and five-port servovalves--Mounting suriaces
液压滤芯 流动疲劳特性的验证 Hydraulic fluid power--Filter elements--Verification of flow fatigue characteristics
液压颗粒污染分析 从工作系统管路中提取液样 Hydraulic fluid power--Particulate contamination analysis--Extraction of fluid samples from lines of an operating system
液压控制阀 油口、底板、控制装置和电磁铁的标识 Hydraulic fluid power--Identification of valve ports,subplates,control devices and solenoids
液压泵、马达和整体传动装置稳态性能的测定 Hydraulic fluid power--Positive displacement pumps,motors and integral transmissions--Determination of steady-state performance
橡胶 管道接口用密封圈制造质量的建议 疵点分类与类别 Rubber--Re, commendations for the workmanship of pipe joint rings--Description and classification of imperfections
液化丙烯、丙烷钢质焊接气瓶 Welded steel cylinders for liquefied propylene and propane gases
单元式空气调节机 Unitary air conditioners
工业通风机 尺寸 Industrial fans--Dimensions
房间空气调节器安装规范 Installation rule for room air-conditioner
空调与制冷用无缝铜管 Specification for seamless copper tube for air conditioning and refrigeration field service
液氨瓶阀 Valves for liquid ammonia cylinders
工业用非重复充装瓶阀 Non-refillable cylinder valve for industry
气瓶对接焊缝 X射线实时成像检测 Standard practice for X-ray real-time examination of cylinders weld
车用压缩天然气瓶阀 Valves for compression natural gas cylinders for vehicles
核级高效空气过滤器 Nuclear grade high efficiency particulate air filter
热塑性塑料管材蠕变比率的试验方法 Thermoplastics pipes--Determination of creep ratio
离心泵、混流泵和轴流泵 水力性能试验规范 精密级 Centrifugal,mixed flow and axial pumps--Code for hydraulic performance tests--Precision class
金属压力容器声发射检测及结果评价方法 Acoustic emission examination and evaluation of metallic pressure vessels
真空技术 质谱检漏仪校准 Vacuum technology--Mass-spectrometer-type leak-detector calibration
机动车用液化石油气钢瓶集成阀 Automotive LPG steel cylinder multivalve
自动控制钠离子交换器技术条件 Specification for automatic sodium ion exchange Water treatment equipment
橡胶和塑料软管及软管组合件 透气性的测定 Rubber and plastics hoses and hose assemblies--Determination of permeability to gas
橡胶和塑料软管及非增强软管 液体壁透性测定 Rubber and plastics hoses and tubing--Determination of transmission of liquids through hose and tubing walls
橡胶和塑料软管 氙弧灯曝晒 颜色和外观变化的测定 Rubber and plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour and appearance
蒸汽橡胶软管试验方法 Rubber hoses for steam--Test methods
液压软管组合件 液压系统外部泄漏分级 Hydraulic hose assemblies--External leakage Classification for hydraulic systems
全封闭涡旋式制冷压缩机 Hermetic scroll refrigerant compressors
蒸气压缩循环冷水(热泵)机组 工商业用和类似用途的冷水(热泵)机组 Water chilling (heat pump) packages using the vapor compression cycle Water chilling (heat pump) packages for industrial and commercial and similar application
蒸气压缩循环冷水(热泵)机组 户用和类似用途的冷水(热泵)机组 Water chilling (Heat pump) Packages using the vapor compression cycle Household and similar water-chilling (Heat pump) packages
蒸汽和热水型溴化锂吸收式冷水机组 Steam and hot water type lithium bromide absorption water chiller
低温绝热压力容器 Cryo-insulation pressure vessels
低温绝热压力容器试验方法 容积测量 Testing method of cryo-insulation pressure vessels volume measurement
低温绝热压力容器试验方法 真空度测量 Testing method of cryo-insulation pressure vessels vacuum measurement
低温绝热压力容器试验方法 漏率测量 Testing method of cryo-insulation pressure vessels leakage measurement
低温绝热压力容器试验方法 漏放气速率测量 Testing method of cryo-insulation pressure vessels leak and outgassing rate measurement
低温绝热压力容器试验方法 静态蒸发率测量 Testing method of cryo-insulation pressure vessels static vaporation rate measurement
交联聚乙烯(PE-X)管材与管件 交联度的试验方法 Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinking by determination of the gel content
热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数 Thermoplastics materials for pipes and fittings for pressure applications classification and designation--Overall Service(design) coefficient
流体输送用聚烯烃管材 耐裂纹扩展的测定切口管材裂纹慢速增长的试验方法(切口试验) Polyolefin pipes for the conveyance of fluids--Determination of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test)
中心孔 Center holes
机床工作台 T形槽和相应螺栓 Machine tool table--T-slots and corresponding bolts
焊缝符号表示法 Welds-symbolic representation on drawings
螺母丝锥 Nut taps
丝锥螺纹公差 Manufacturing tolerances on the threaded portion of taps
丝锥技术条件 Technical specification for taps
圆板牙 型式和尺寸 The types and dimensions for circular screwing dies
圆板牙 技术条件 Technical specifications for circular screwing dies
圆板牙架型式和互换尺寸 Die stocks--Interchangeability dimensions
滚丝轮 Thread rolling cylindrical dies
搓丝板 Thread rolling flat dies
不锈钢焊条 Stainless steel covered electrodes
堆焊焊条 Hardfacing electrodes for shielded metal arc welding
气焊、手工电弧焊及气体保护焊焊缝坡口的基本形式与尺寸 Basic forms and sizes of weld grooves for gas welding manual arc welding and gas-Shielded arc welding
埋弧焊焊缝坡口的基本形式和尺寸 Basic forms and sizes of weld grooves for submerged arc welding
电渣重熔炉的试验方法 Test methods for electro-slag remelting furnaces
短莫氏锥柄立铣刀 End mills with short Morse taper shank
键槽铣刀 第1部分: 直柄键槽铣刀 型式和尺寸 Slot drills- Part 1: Milling cutters with parallel shanks-Dimensions
键槽铣刀 第2部分: 莫氏锥柄键槽铣刀 型式和尺寸 Slot drills--Part 2: Milling cutters with Morse taper shanks-Dimensions
键槽铣刀 第3部分: 技术条件 Slot drills--Part 3: Technical specifications
套式立铣刀 第1部分: 型式与尺寸 Shell end mills--Part 1: Dimensions
套式立铣刀 第2部分: 技术条件 Shell end mills--Part 2: Tachnical specifications
圆柱形铣刀 Cylindrical cutters
直齿三面刃铣刀 Side and face milling cutter with straight teeth
错齿三面刃铣刀 Side and face milling cutters with double alternate helix
尖齿槽铣刀 Flat relieved tooth slotting cutters
凸凹半圆铣刀 第1部分: 凹半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 1: The types and dimensions for concave milling cutters
凸凹半圆铣刀 第2部分: 凸半圆铣刀的型式和尺寸 Convex and concave milling cutters--Part 2: The types and dimensions for convex milling cutters
凸凹半圆铣刀 技术条件 Convex and concave milling cutters technical specifications
半圆键槽铣刀 Cutters for woodruff keyseats
手用铰刀 Hand reamers
直柄机用铰刀 Machine reamers with parallel shanks
锥柄机用铰刀 Machine reamers with Morse taper shanks
带刃倾角锥柄机用铰刀 Machine reamers with edge inclination Morse taper shanks
套式机用铰刀 Shell machine reamers
直柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with parallel shanks
锥柄莫氏圆锥和公制圆锥铰刀 Morse and metric taper reamers with Morse taper shanks
锥柄扩孔钻 Core drills with Morse taper shanks
套式扩孔钻 Shell drills
60°、90°、120°锥柄锥面锪钻 Countersinks with morse taper shanks for angles 60°,90°and 120°inclusive
锥柄麻花钻 第1部分: 莫氏锥柄麻花钻的型式和尺寸 Taper shank twist drills--Part 1: The types and dimensions for Morse taper shank twist drills
锥柄麻花钻 第2部分: 莫氏锥柄长麻花钻的型式和尺寸 Taper shank twist drills--Part 2: The types and dimensions for long Morse taper shank drills
锥柄麻花钻 第3部分: 莫氏锥柄加长麻花钻的型式和尺寸 Taper shank twist drills--Part 3: The types and dimensions for lengthened morse taper shank twist drills
锥柄麻花钻 第4部分: 莫氏锥柄超长麻花钻的型式和尺寸 Taper shank twist drills--Part 4: The types and dimensions for extra-long Morse taper shank twist drills
直柄工具用传动扁尾及套筒的尺寸和公差 Driving tenons and sockets for parallel shank tools-- Dimensions and tolerances
机床和工具柄用自夹圆锥 Machine tools--Self-holding tapers for tool shanks
卧式车床 参数 General purpose parallel lathes--Parameters
镀锡钢板(带)镀锡量试验方法 Tin coated sheet(strip)--Tin coating mass testing method
钢铁产品镀锌层质量试验方法 Steel product--Zinc coating mass testing method
铬镍奥氏体不锈钢焊缝铁素体含量测量方法 Determination of the weldign seam iron element contentin chromium,nickel austenitic stainless steel
切削加工用硬切削材料的用途 切屑形式大组和用途小组的分类代号 Application of hard cutting materials for machining by chip removal--Designation of the main groups of chip removal and groups of application
切削刀具用可转位刀片型号表示规则 Indexale inserts for cutting tools--Designation
硬质合金可转位刀片圆角半径 Indexable hardmetal (carbide) inserts--Corner radii
带圆孔的硬质合金可转位刀片 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole
无孔的硬质合金可转位刀片 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole--Dimensions
沉孔硬质合金可转位刀片 Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole--Part 1: Dimensions of inserts with 7°normal clearance
硬质合金可转位铣刀片 Indexable hardmetal (carbide)inserts with wiper edges, without fixing hole--Dimensions
普通磨料 代号 Symbols of abrasive materials
普通磨料 棕刚玉 Conventional abrasive--Brown fused alumina
普通磨料 碳化硅 Conventional abrasive Wilicon carbide
固结磨具用磨料 粒度组成的检测和标记 第1部分: 粗磨粒 F4~F220 Bonded abrasives--Determination and designation of grain size distribution--Part 1: Macrogrits F4 to F220
固结磨具用磨料 粒度组成的检测和标记 第2部分: 微粉F230~F1200 Bonded abrasives--Determination and designation of grain size distribution--Part 2: Microgrits F230 to F1200
磨料标志和包装规定 Marking and packing
普通磨具 代号和标记 Symbols and designation for bonded abrasive products
普通磨具 砂轮 技术条件 Bonded abrasive products Grinding wheel Technical specifications
普通磨具 磨头 技术条件 Bonded abrasive products Mounted wheel Technical specifications
普通磨具 磨石 技术条件 Bonded abrasive products Sticks Technical specifications
普通磨具 砂瓦 技术条件 Bonded abrasive products Grinding segments Technical specifications
薄片砂轮 Thin grinding wheels
砂轮静平衡检验方法及不平衡数值 Static balance testing for grinding wheels and unbalance value
砂轮的回转试验方法 Rotation test of grinding wheel strength
磨具安全规则 Safety rules for bonded abrasives
普通磨具 包装 Packing for bonded abrasive products
机械分度头 精度检验 Mechanical dividing heads Testing of accuracy
机械分度头 分类和技术条件 Mechanical dividing heads Classifations and Technical specifcations
DDZ-Ⅱ系列电动单元组合仪表工作信号 DDZ-ⅡSeries process electronic control system operating signal
DDZ-Ⅲ系列电动单元组合仪表工作信号 DDZ-ⅢSeries process electronic control system operating signal
过程检测和控制流程图用图形符号和文字代号 Prccess detection and control flow chart--Symbols and letter codes
焊接接头机械性能试验取样方法 Methods of sampling for mechanical properties tests of welded joint
焊接接头冲击试验方法 Method of impact test for welded joint
焊接接头拉伸试验方法 Method of tensile test for welded joint
焊缝及熔敷金属拉伸试验方法 Method of tensile tests for weld and deposited metal
焊接接头弯曲及压扁试验方法 Methods of bend and compression tests for welded joint
焊接接头及堆焊金属硬度试验方法 Methods of hardness tests for welded joint and surfacing metal
焊接接头应变时效敏感性试验方法 Method of strain-age sensibillity test for welded joint
焊缝金属和焊接接头的疲劳试验法 Weld beads metal and welds--Fatigue tests
组合夹具元件结构要素 Modular parts of fixture construction--General features, profiles and dimensions
台式钻床参数 Bench drilling machines - Parameters
立式钻床参数 Vertical drilling machines - Parameters
钻床主轴端部 Drilling machines?Spindle noses
冲模滑动导向模架 对角导柱模架 Sliding guide die sets for press tools?Diagonal pillar sets
冲模滑动导向模架 后侧导柱模架 Sliding guide die sets for press tools - Back pillar sets
冲模滑动导向模架 后侧导柱窄形模架 Sliding guide die sets for press tools - Back pillar sets (narrow)
冲模滑动导向模架 中间导柱模架 Sliding guide die seta for press tools - Center pillar sets
冲模滑动导向模架 中间导柱圆形模架 Sliding guide die sets for press tools - Center pillar sets (round)
冲模滑动导向模架 四导柱模架 Sliding guide die sets for press tools - Four pillar die sets
冲模滚动导向模架 对角导柱模架 Ball slide die sets for press tools - Diagonal pillar sets
冲模滚动导向模架 中间导柱模架 Ball slide die sets for press tools - Center pillar sets
冲模滚动导向模架 四导柱模架 Ball slide die sets for press tools - Four pillar die sets
冲模滚动导向模架 后侧导柱模架 Ball slide die sets for press tools?Back pillar die sets
冲模滑动导向模座 对角导柱上模座 Holder for sliding guide die sets for press tools - Punch holder for diagonal pillar sets
冲模滑动导向模座 对角导柱下模座 Holder for sliding guide die sets for press tools - Die holder for diagonal pillar sets
冲模滑动导向模座 后侧导柱上模座 Holder for sliding guide die sets for press tools - Punch holder for back pillar sets
冲模滑动导向模座 后侧导柱下模座 Holder for ball slide die sets for press tools - Die holder for back pillar sets
冲模滑动导向模座 后侧导柱窄形上模座 Holder for sliding guide die sets for press tools - Punch holder for back pillar sets (narrow)
冲模滑动导向模座 后侧导柱窄形下模座 Holder for sliding guide die sets for press tools - Die holder for back pillar sets (narrow)
冲模滑动导向模座 中间导柱上模座 Holder for sliding guide die sets for press tools - Punch holder for center pillar sets
冲模滑动导向模座 中间导柱下模座 Holder for ball slide die sets for press tools - Die holder for center pillar sets
冲模滑动导向模座 中间导柱圆形上模座 Holder for sliding guide die sets for press tools - Punch holder for center pollar sets (round)
冲模滑动导向模座 中间导柱圆形下模座 Holder for sliding guide die sets for press tools - Die holder for center pillar sets (round)
冲模滑动导向模座 四导柱上模座 Holder for sliding guide die sets for press tools - Punch holder for four pillar sets
冲模滑动导向模座 四导柱下模座 Holder for ball slide die sets for press tools?Die holder for four pillar sets
冲模滚动导向模座 对角导柱上模座 Holder for ball slide die sets for press tools - Punch holder for diagonal pillar sets
冲模滚动导向模座 对角导柱下模座 Holder for ball slide die sets for press tools - Die holder for diagonal pillar sets
冲模滚动导向模座 中间导柱上模座 Holder for ball silde die sets for press tools - Punch holder for center pillar sets
冲模滚动导向模座 中间导柱下模座 Holder for ball slide die sets for press tools - Die holder for center pillar sets
冲模滚动导向模座 四导柱上模座 Holder for ball slide die sets for press tools - Punch holder for four pillar sets
冲模滚动导向模座 四导柱下模座 Holder for ball slide die sets for press tools - Die holder for four pillar sets
冲模滚动导向模座 后侧导柱上模座 Holder for ball silde die sets for press tools - Punch holder for back pillar sets
冲模滚动导向模座 后侧导柱下模座 Holder for ball slide die sets for press tools - Die holder for back pillar sets
冲模导向装置 A型导柱 Guide unit for press tools - Guide pillars, types A
冲模导向装置 B型导柱 Guide unit for press tools - Guide pillars, type B
冲模导向装置 C型导柱 Guide unit for press tools - Guide pillars, type C
冷冲模导向装置 A型小导柱 Guide unit of cold press dies--Small guide
冷冲模导向装置 B型小导柱 Guide unit of cold press dies--Small guide pillars, type B
冲模导向装置 A型导套 Guide unit for press tools - Guide bushes, type A
冲模导向装置 B型导套 Guide unit for press tools - Guide bushes, type B
冲模导向装置 C型导套 Guide unit for press tools - Guide bushes, type C
冷冲模导向装置 小导套 Guide unit of cold press dies--Small guide bushing
冲模导向装置 钢球保持圈 Guide unit for press tools - Cage
冲模导向装置 圆柱螺旋压缩弹簧 Guide unit for press tools - Cylindrical coil compression spring
冲模导向装置 A型可卸导柱 Guide unit for press tools - Guide pillar with taper lead, type A
冲模导向装置 B型可卸导柱 Guide unit fir press tools - Guide pillar with taper lead, type B
冲模导向装置 衬套 Guide unit for press tools - Bushing
冲模导向装置 垫圈 Guide unit for press tools?Washer
冲模导向装置 压板 Guide unit for press tools - Clampr
冷冲模导向装置 可卸导柱模座安装尺寸 Guide unit of cold press dies--Mounting dimension of die holder for removable guide pillars
冷冲模导向装置 压圈固定导柱 Guide unit of cold press dies--Guide pillars with ring fixed
冷冲模导向装置 压圈固定导套 Guide unit of cold press dies--Guide bushing with ring fixed
冷冲模导向装置 压圈 Guide unit of cold press dies--Clamping ring
镀锌钢丝锌层硫酸铜试验方法 Zinc-coated steel wire - Test method for uniformity of zinc coating on wire by the copper sulphate dip
镀锌钢丝锌层重量试验方法 Zinc-coated steel wire - Test method for weight of zinc coating
棕刚玉化学分析方法 Abrasive grains and crude--Chemical analysis of brown fused aluminium oxide
白刚玉、铬刚玉 化学分析方法 Chemical analysis methods for white fused alumina and pink fused alumina
碳化硅 化学分析方法 Chemical analysis methods for silicon carbide
锡铅钎料 Tin-lead solder
金属镀覆和化学处理与有关过程术语 Terminology for metallic coating chemical treatment and related process
金属切削机床 操作指示形象化符号 Symbols for indications appearing on machine tools
数字控制机床 操作指示形象化符号 Numerical control of machines--Symbols
螺栓螺母用装配工具 机动套筒工具的传动四方 Assembly tools for screws and nuts-Driving squares for power socket tools
螺栓螺母用装配工具 冲击式机动四方传动套筒的尺寸 Assembly tools for screws and nuts-Machine-operated square drive sockets (impact)--Dimensions
螺栓螺钉用装配工具 机动螺刀头的六角传动端 Assembly tools for bolts and screws--Hexagon drive ends for machine-operated screwdriver bits
钢熔化焊对接接头射线照相和质量分级 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel
工业自动化仪表用模拟直流电流信号 Analogue direct current signals for industrial process measurement and control instruments
工业自动化仪表用模拟直流电压信号 Analogue direct voltage signals for industrial process measurement and control instruments
焊接术语 Welding terminology
手动套筒扳手套筒 Hand operated square drive socket
手动套筒扳手传动方榫和方孔 Driving square for hand operated socket wrenches
手动套筒扳手传动附件 Drivings parts for hand operated square drive socket wrenches
手动套筒扳手连接附件 Conjoining parts for hand operated square drive socket wrenches
手动套筒扳手检验规则、包装与标志 Inspection, packaging and marking for hand operated socket wrenches
焊接用钢盘条 Wire rods for electrode
机用和手用丝锥 Machine and hand taps
长柄机用丝锥 Long shank machine taps
短柄机用和手用丝锥 Short shank machine and hand taps
螺旋槽丝锥 Machine taps with helical flutes
组合机床通用部件 多轴箱箱体和输入轴尺寸 Modular units for machine tool construction--Multi-spindle heads--Casing and input drive shaft dimensions
组合机床通用部件 支架尺寸 Modular units for machine tool construction--Support brackets--Dimensions
组合机床通用部件 回转工作台和回转工作台用多边形中间底座尺寸 Modular units for machine tool construction--Rotary tables and multi-sided centre bases for rotary tables--Dimensions
组合机床通用部件 滑台尺寸 Modular units for machine tool construction--Slide units--Dimensions
组合机床通用部件 动力箱尺寸 Modular units for machine tool construction--Headstocks--Dimensions
组合机床通用部件 滑台侧底座尺寸 Modular units for machine tool construction--Wing bases for slide units--Dimensions
组合机床通用部件 中间底座和立柱尺寸 Modular units for machine tool construction--Centre bases and columns--Dimensions
组合机床通用部件 立柱侧底座尺寸 Modular units for machine tool construction--Wing base for columns--Dimensions
组合机床通用部件 主轴部件尺寸 Modular units for machine tool construction--Spindle units--Dimensions
组合机床通用部件 多轴箱主轴端部和可调接杆尺寸 Modular units for machine tool construction--Spindle noses and adjustable adaptors for multi-spindle heads --Dimensions
组合机床通用部件 有导轨立柱尺寸 Modular units for machine tool construction--Integral way columns--Dimensions
组合机床通用部件 落地式有导轨立柱尺寸 Modular units for machine tool construction--Floor-mounted type--Integral way columns--Dimensions
组合机床通用部件 安装多轴箱用的法兰盘和端面传动键尺寸 Modular units for machine tool construction--Tenon drive and flanges for mounting multi-spindle heads--Dimensions
铝及铝合金焊条 Aluminum and aluminum-alloy electrodes for shielded metal arc welding
铜及铜合金焊条 Coated electrodes for copper and copper alloys
涂料焊条效率、金属回收率和熔敷系数的测定 Covered electrodes--Determination of the efficiency, metal recovery and deposition coefficient
手持式电动工具的管理、使用、检查和维修安全技术规程 Technical safety code for management, operation, inspection maintenance of hand-held motor operated tools
拉刀矩形柄 型式和基本尺寸 Rectangular shanks for broaches--Types and main dimensions
拉刀圆柱形前柄型式和基本尺寸 Round shanks for broaches--Types and main dimensions
拉刀圆柱形后柄型式和基本尺寸 Round follower end for broaches--Types and main dimensions
7:24手动换刀刀柄圆锥 7/24 tapers for tool shanks for manual changing
手持式电动工具的安全 第一部分: 通用要求 Safety of hand-held motor-operated electric tools Part 1: General requirements
手持式电动工具的安全 第二部分: 螺丝刀和冲击扳手的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for screwdrivers and impact wrenches
手持式电动工具的安全 第二部分: 电动砂轮机、抛光机和盘式砂光机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requiements for electric grinders, polishers and disk-type sanders
手持式电动工具的安全 第二部分: 砂光机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sanders
手持式电动工具的安全 第二部分: 圆锯和圆刀的专用要求 Safety of hand-held motor-operated tools Part 2: Particular requirments for circular saws and circular knives
手持式电动工具的安全 第二部分: 电钻的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular reqiements for electric drills
手持式电动工具的安全 第二部分: 电锤的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric hammers
手持式电动工具的安全 第二部分: 电剪刀的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sheet matal shears
手持式电动工具的安全 第二部分: 电动攻丝机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric tappers
手持式电动工具的安全 第二部分: 电刨的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particlar requirements for electric planers
手持式电动工具的安全 第二部分: 电动往复锯 (曲线锯、刀锯) 的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric reciprocating saws (jig and sabre saws)
手持式电动工具的安全 第二部分: 混凝土振动器 (插入式振动器) 的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for concrete vibrators (internal vibrators)
手持式电动工具的安全 第二部分: 不易燃液体电喷枪的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for spray guns for non-flammable liquids
手持式电动工具的安全 第二部分: 电链锯的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for chain saws
手持式电动工具的安全 第二部分: 电动修枝剪与电动草剪的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for hedge trimmers and grass shears
手持式电动工具的安全 第二部分: 电动钉钉机的专用要求 Safety of hand-held motor operated electric tools--Part 2: Particular requirements for tackers
手持式电动工具的安全 第二部分: 电动木铣与电动修边机的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for routers and immers
工作台不升降铣床精度 Milling machines with table of fixed height with horizontal or vertical spindle--Testing of the accuracy
升降台铣床精度 Milling machines with table of variable height with horizontal or vertical spindle--Testing of the accuracy
熔敷金属中扩散氢测定方法 Methods for determination of diffusible hydrogen in deposited metal
摇臂钻床 精度检验 Radial drilling machines--Testing of the accuracy
圆柱立式钻床 精度检验 第1部分: 几何精度检验 Pillar type vertical drilling machines--Testing of the accuracy--Part 1: Testing of the geometric accuracy
圆柱立式钻床 精度检验 第2部分: 工作精度检验 Pillar type vertical drilling machines--Testing of the accuracy--Part 2: Testing of the working accuracy
方柱立式钻床 精度检验 第1部分: 几何精度检验 Box type vertical drilling machines--Testing of the accuracy--Part 1: Geometrical tests
方柱立式钻床 精度检验 第2部分: 工作精度检验 Bot type vertical drilling machines--Testing of the accuracy--Part 2: Working tests
卧式车床精度检验 Acceptance conditions for general purpose parallel lathes--Testing of the accuracy
卧轴矩台平面磨床 精度 Surface grinding machines with horizontal grinding wheel spindle and reciprocating table--Testing of the accuracy
普通磨具 形状和尺寸 Shapes and dimensions for bonded abrasive products
塑料注射模具零件 推杆 Components of injection mould for plastics--Ejector pins
塑料注射模具零件 直导套 Components of injection mould for plastics--Straight guide bushes
塑料注射模具零件 带头导套 Components of injection mould for plastics--Guide bushes with head
塑料注射模具零件 带头导柱 Components of injection mould for plastics--Guide pillars with head
塑料注射模具零件 有肩导柱 Components of injection mould for plastics -- Guide pillars with shoulder
塑料注射模具零件 垫块 Components of injection mould for plastics -- Spacer blocks
塑料注射模具零件 推板 Components of injection mould for plastics--Ejector plates
塑料注射模具零件 模板 Components of injection mould for plastics--Mould plates
塑料注射模具零件 限位钉 Components of injection mould for plastics--Stop pins
塑料注射模具零件 支承柱 Components of injection mould for plastics--Support pillars
塑料注射模具零件 圆锥定位件 Components of injection mould for plastics--Locating elements
塑料注射模具零件技术条件 Components of injection mould for plastics--Specifica-tion
高速钢车刀条 High speed steel tool bits
锥柄长刃机用铰刀 Long fluted machine reamers with Morse taper shanks
带刃倾角直柄机用铰刀 Machine reamers with edge inclination with parallel shanks
机用铰刀技术条件 Machine reamers--Technical requirements
铰刀专用公差 Special tolerance for reamers
锥柄机用桥梁铰刀 Machine bridge reamers with Morse taper shanks
手用1:50锥度销子铰刀技术条件 Hand taper 1:50 reamers--Technical requirements
圆锥铰刀技术条件 Taper reamers--Technical requirements
硬质合金直柄机用铰刀 Machine reamers with parallel shanks with carbide tips
硬质合金锥柄机用铰刀 Machine reamers with Morse taper shanks with carbide tips
硬质合金铰刀技术条件 Reamers with carbide tips--Technical requirements
套式铰刀和套式扩孔钻用心轴 Arbors for shell reamers and shell core drills
直柄扩孔钻 Core drills with parallel shanks
扩孔钻技术条件 Core drills--Technical requirements
60°、90°、120°直柄锥面锪钻 Countersinks with parallel shanks for angles 60°90°and 120°inclusive
锥面锪钻技术条件 Countersinks--technical requirements
带导柱直柄平底锪钻 Counterbores with parallel shanks and solid pilots
带可换导柱锥柄平底锪钻 Counterbores with morse taper shanks and detachable pilots
平底锪钻技术条件 Counterbores--technical requirements
带导柱直柄90°锥面锪钻 90°Countersinks with parallel shanks and solid pilots
带可换导柱锥柄90°锥面锪钻 90°Countersinks with morse taper shanks and detachable pilots
90°锥面锪钻技术条件 90°Countersinks--technical requirements
锪钻用可换导柱 Detachable pilots for use with counterbores and countersinks
直柄回转工具用柄部直径和传动方头尺寸 Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares
三爪自定心卡盘 基本参数和尺寸 3-jaw self-centering chucks--Dimensions
呆扳手、梅花扳手、两用扳手的型式 Types of open-end wrenches, box wrenches and combination wrenches
螺钉与螺母的装配工具 双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸 Assembly tool for screws and nuts-Openend double-head engineers wrenches, doublehead box wrenches and combination wrenches-Maximum outside dimensions of heads
公制扳手开口和扳手孔的常用公差 Spanner gaps and sockets-Metric series-tolerances for general use
双头扳手的对边尺寸组配 Combinations of double-end wrenche gaps
敲击呆扳手和敲击梅花扳手 Slugging open-end wrenches and slugging box wrenches
呆扳手 - 梅花扳手、两用扳手 技术规范 Open-end wrenches, box wrenches and combination wrenches-Technical specifications
工业自动化仪表工作条件 振动 Industrial process measurement and control instrument operating conditions--Vibration
活扳手 Adjustable wrenches
电动工具噪声测量方法 工程法 Measurement of noise emitted by electric tools-Engineering method
螺钉和螺母的装配工具术语 Assembly tools for screws and nuts-nomenclature
焊接性试验 斜Y型坡口焊接裂纹试验方法 Weldability testing--Method of Y-groove cracking test
焊接性试验 搭接接头(CTS) 焊接裂纹试验方法 Weldability testing--Method of controlled thermal severity cracking test
焊接性试验 T型接头焊接裂纹试验方法 Weldability testing--Method of cracking test for welded tee joint
焊接性试验 压板对接(FISCO) 焊接裂纹试验方法 Weldability testing--Method of FISCO cracking test
焊接性试验 焊接热影响区最高硬度试验方法 Weldability testing--Testing method of maximum hard ness in weld heat-affected zone
普通磨料取样方法 Method for sampling of conventional abrasive grains
压铸模零件 模块 Die-cast die components--Mold plates
压铸模零件 圆形镶块 Die-cast die components--Round insert blocks
压铸模零件 矩形镶块 Die-cast die components--Rectangular insert blocks
压铸模零件 A型导柱 Die-cast die components--Guide pins type A
压铸模零件 B型导柱 Die-cast die components--Guide pins type B
压铸模零件 A型导套 Die-cast die components--Guide bushings type A
压铸模零件 B型导套 Die-cast die components--Guide bushings type B
压铸模零件 推板 Die-cast die components--Ejector plates
压铸模零件 推板导柱 Die-cast die components--Guide pins for ejector plate
压铸模零件 推板导套 Die-cast die components--Guide bushings for ejector plate
压铸模零件 推杆 Die-cast die components--Ejector pins
压铸模零件 复位杆 Die-cast die components--Return pins
压铸模零件 推板垫圈 Die-cast die components--Ejector plate washers
压铸模零件 限位钉 Die-cast die components--Stop pins
压铸模零件 垫块 Die-cast die components--Spacer blocks
压铸模零件技术条件 Specification of the die-cast die components
卧式内拉床 精度检验 Horizontal internal broaching machines--Testing of the accuracy
无心磨床 精度 External cylindrical centerless grinding machines--Testing of the accuracy
内圆磨床 精度 Internal cylindrical grinding machines with horizontal spindles--Testing of the accuracy
转塔车床精度 Turret lathes--Testing of the accuracy
外圆磨床 参数 External cylindrical grinding machines--Parameters
外圆磨床 精度 External cylindrical grinding machines--Accuracy
插齿机精度 Gear shaping machines--Testing of the accuracy
测量、控制和试验室用电气设备的安全要求 第1部分: 通用要求 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements
工业自动化仪表气源压力范围和质量 Pressure range and quality of air supply for the industrial process measurement and control instruments
金属覆盖层 覆盖层厚度测量 阳极溶解库仑法 Metallic coatings--Measurement of coating thickness--Coulometric method by anodic dissolution
磁性金属基体上非磁性覆盖层厚度测量 磁性方法 Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
非磁性金属基体上非导电覆盖层厚度测量 涡流方法 Non-conductive coatings on non-magnetic metal substrates--Measurement of coating thickness--Eddy current method
压力机的安全装置技术要求 Technical requirememts for safety devices of the presses
压力机用感应式安全装置技术条件 Technical requirements for induction type safety device used for the presses
压力机用手持电磁吸盘技术条件 Technical requirements for hand-held electromagnetic disk used for the presses
渐开线花键拉刀技术条件 Broaches for involute spline technical specifications
渐开线花键滚刀通用技术条件 The general technical specifications for involute splines hobs
30°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 30°pressure angle involute splines
45°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 45°pressure angle involute splines
焊接和切割用软管接头 Hose connection for equipment for welding and cutting
碳钢焊条 Carbon steel covered electrodes
低合金钢焊条 Low alloy steel covered electrodes
金属焊接及钎焊方法在图样上的表示代号 Welding, brazing, braze welding and soldering of metals--List of processes for symbolic representation on drawings
螺纹紧固件电镀层 Electroplated coatings on threaded fasteners
车床刀架装刀槽高度 Machine tools--Lathe tool posts--Overall internal height
金属基体上的金属覆盖层 (电沉积层和化学沉积层) 附着强度试验方法 Metallic coatings on metallic substrates--Electrodepo-sited and chemically deposited coatings--Review of methods available for testing adhesion
龙门导轨磨床精度 Slideways grinding machines with two columns--Testing of the accuracy
卧式铣镗床检验条件 精度检验 第2部分: 台式机床 Test conditions for boring and milling machines with horizontal spindle--Testing of the accuracy Part 2: Table--type machines
电火花成形机 参数 第1部分: 单立柱机床(十字工作台型和固定工作台型) Die sinking electro-discharge machines(EDM)--Parameters Part 1: Single column machines(cross slide table type and fixed table type)
电火花成形机 精度检验 第1部分: 单立柱机床(十字工作台型和固定工作台型) Die sinking electro-discharge machines(EDM)--Testing of accuracy Part 1: Single column machines (cross slide table type and fixed table type)
埋弧焊用碳钢焊丝和焊剂 Carbon steel electrodes and fluxs for submerged arc welding
手工具包装、标志、运输与贮存 Packaging,marking,transportation and storage of hand tools
Ni-B-Si系自熔合金粉 Metallic powder material--Self-fluxing Ni-B-Si alloy powder
Ni-Cr-B-Si系自熔合金粉 Metallic powder material--Self-fluxing Ni-Cr-B-Si alloy powder
可转位立铣刀 Endmilling cutters with indexable inserts
可转位三面刃铣刀 Side and facemilling cutters with indexable inserts
可转位面铣刀 Facemilling cutters with indexable inserts
可转位车刀及刀夹型号表示规则 Turning toolholders and cartridges for indexable inserts--Designation
可转位车刀型式尺寸和技术条件 Turning tools with indexable inserts--Types,dimensions and technical specifications
内六角扳手 Hexagon socket screw keys
内六角花形扳手 Hexagon spline wrenches
内六角花形螺钉旋具 Hexagon spline screwdrivers
电钻 Electric drills
铸造术语 Foundry terminology
防锈材料百叶箱试验方法 Shed storage exposure test--Testing method for rust-proof material
凿岩机械与气动工具 性能试验方法 Test methods of performance for rock drilling machines and pneumatic tools
数据处理用的模块化仪器系统 CAMAC 系统 A modular instrumentation system for data handling--CAMAC system
CAMAC 术语的定义 Definitions of CAMAC terms
CAMAC 多机箱系统结构分支信息公路和A1型CAMAC 机箱控制器规范 CAMAC organization of multi-crate systems specification of the branch-highway and CAMAC crate controller type A1
CAMAC 系统中的块传送 Block transfers in CAMAC systems
摩擦材料洛氏硬度试验方法 Test method of Rockwell hardness for friction materials
锉刀通用技术条件 General technical condition of files
锉刀试验方法 Test methods of files
锉刀检验规则、标志与包装 Test regulations, marking and packaging of files
锉刀分类、编号规则 Classification and numbering regulations of files
机床 主轴端部与花盘 互换性尺寸 第1部分: A型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 1: Type A
机床 主轴端部与花盘 互换性尺寸 第2部分: 凸轮锁紧型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 2: Camlock type
机床 主轴端部与花盘 互换性尺寸 第3部分: 卡口型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 3: Bayonet type
四爪单动卡盘 型式、基本参数和尺寸 Types, basic parameters and dimensions of four-jaw independent chucks
四爪单动卡盘 精度 Testing of accuracy of four-jaw independent chucks
四爪单动卡盘 技术条件 Technical specifications of four-jaw independent chucks
工业闭式齿轮油 Gear oils for industrial enclosed gear drives
电热设备的安全 第一部分 通用要求 Safety in electroheat installations--Part 1: General requirements
电热设备的安全 第二部分 对电弧炉设备的特殊要求 Safety in electroheat installations-part 2 Particular requirements for arc furnace installations
电热设备的安全 第三部分 对感应和导电加热设备以及感应熔炼设备的特殊要求 Safety in electroheat installations--Part 3: Particular requirements for induction and conduction heating installations and induction melting installations
电热设备的安全 第四部分: 对电阻炉的通用要求 Safety in electroheat installations--Part 4: General requirements for resistance furnaces
电热设备的安全 第五部分 等离子设备的安全规程 Safety in electroheat installations - Part 5: Specifications for safety in plasma installations
电热设备的安全 第六部分 对工业微波加热设备的特殊要求 Safety in electroheat installations--Part 6: Particular requirements for industrial microwave heating installations
电热设备的安全 第七部分 对具有电子枪的电热设备的特殊要求 Safety in electroheat installations--part 7: Particular requirements for installations with electron guns
电热设备的安全 第八部分 对电渣重熔炉的特殊要求 Safety in electroheat installations--part 8: Particular requirements for electro-slag remelting furnaces
电热设备的安全 第九部分 对高频介质加热设备的特殊要求 Safety in electroheat installations?Part 9: Particular requirements for high-frequency dielectric heating installations
电热设备的安全 第11部分: 对液态金属电磁搅拌、输送或浇注设备的特殊要求 Safety in electroheat installations-Part 11: Particular requirements for installations for electromagnetic stirring,transport or pouring of metal liquids
表面粗糙度比较样块 铸造表面 Roughness comparison specimens--Cast surfaces
剪切机械安全规程 Safety regulations for shearing machinery
中心钻 第1部分: 不带护锥的中心钻-A型 型式和尺寸 Centre drills Part 1: Centre drills for centre holes without protecting chamfers-Type A Dimensions
中心钻 第2部分: 带护锥的中心钻-B型 型式和尺寸 Centre drills Part 2: Centre drills for centre holes with protecting chamfers--Type B Dimensions
中心钻 第3部分: 弧形中心钻-R型 型式和尺寸 Centre drills Part 3: Centre drills for centre holes with radius form--Type R Dimensions
中心钻 第4部分: 技术条件 Center drills Part 4: Technical specifications
机用锯条 第1部分: 型式与尺寸 Machine hacksaw blades Part 1: Dimensions
机用锯条 第2部分: 技术条件 Machine hacksaw blades Part 2: Technical specifications
直齿插齿刀 基本型式和尺寸 The basic types and dimensions for spur shaper cutters
直齿插齿刀 通用技术条件 The general technical specifications for spur shaper cutters
齿轮滚刀 基本型式和尺寸 The basic type and dimensions of gear hobs
齿轮滚刀 通用技术条件 The general technical specifications for gear hobs
扳手钻夹头 Key type drill chuck
钻夹头圆锥 Drill chuck tapers
硬质合金拉制模具 型式和尺寸 Hardmetal dies for drawing wires and bars--Types and dimensions
立铣刀 第1部分: 直柄立铣刀的型式和尺寸 End mills--Part 1: Milling cutters with parallel shanks
立铣刀 第2部分: 莫氏锥柄立铣刀的型式和尺寸 End mills--Part 2: Milling cutters with morse taper shanks
立铣刀 第3部分: 7/24锥柄立铣刀的型式和尺寸 End mills--Part 3: Milling cutters with 7/24 taper shanks
立铣刀 技术条件 End mills--Technical specifications
三面刃铣刀 型式和尺寸 Side and face milling cutter--Tapes and dimensions
三面刃铣刀 技术条件 Side and face milling cutter--Technical specifications
锯片铣刀 型式和尺寸 Metal slitting saws--Types and dimensions
锯片铣刀 技术条件 Metal slitting saws--Technical specifications
圆角铣刀 Corner-rounding cutters
T型槽铣刀 第1部分: 直柄T型槽铣刀的型式和尺寸 T-slot cutters--Part 1: Dimensions of T-slot cutters with plain or flated parallel shanks
T型槽铣刀 第2部分: 莫氏锥柄T型槽铣刀的型式和尺寸 T-slot cutters--Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes
T型槽铣刀 技术条件 T-slot cutters--Technical specifications
角度铣刀 第1部分: 单角铣刀的型式和尺寸 Angle milling cutter--Part 1: The types and dimensions for single angle cutters
角度铣刀 第2部分: 不对称双角铣刀的型式和尺寸 Angle milling cutter--Part 2: The types and dimensions for double unequal-angle cutters
角度铣刀 第3部分: 对称双角铣刀的型式和尺寸 Angle milling cutter--Part 3: The types and dimensions for double equal-angle cutters
角度铣刀 技术条件 Angle cutters--Technical specifications
镶片圆锯 Segmental circular metal cutting saws
铣刀直柄 第1部分: 普通直柄的型式和尺寸 Parallel shanks for milling cutters--Part 1: Dimensional characteristics of plain parallel shanks
铣刀直柄 第2部分: 削平直柄的型式和尺寸 Parallel shanks for milling cutters--Part 2: Dimensional characteristics of flatted parallel shanks
铣刀直柄 第3部分: 2°斜削平直柄的型式和尺寸 Parallel shanks for milling cutters--Part 3: Dimensional characteristics of parallel shanks with 2°angular flats
铣刀直柄 第4部分: 螺纹柄的型式和尺寸 Parallel shanks for milling cutters--Part 4: Dimensional characteristics of screwed shanks
铣刀和铣刀刀杆的互换尺寸 Interchang eability dimensions for milling cutters and arbors
削平型直柄刀具夹头 Tool chucks for flated parallel shank tools
直柄麻花钻 第1部分: 粗直柄小麻花钻的型式和尺寸 Parallel shank twist drills--Part 1: The types and dimensions for small type twist drills with oversize parallel shank
直柄麻花钻 第2部分: 直柄短麻花钻的型式和尺寸 Parallel shank twist drills--Part 2: The types and dimensions for parallel shank stub series twist drills
直柄麻花钻 第3部分: 直柄麻花钻的型式和尺寸 Parallel shank twist drills--Part 3: The types and dimesnions for parallel shank jobber series twist drills
直柄麻花钻 第4部分: 直柄长麻花钻的型式和尺寸 Parallel shank twist drills--Part 4: The types and dimensions for parallel shank long series twist drills
直柄麻花钻 第5部分: 直柄超长麻花钻的型式和尺寸 Parallel shank twist drills--Part 5: The types and dimensions for extra long parallel shank twist drills
攻丝前钻孔用阶梯麻花钻 第1部分: 直柄阶梯麻花钻的型式和尺寸 Subland twist drills for holes prior to tapping screw threads Part 1: The types and dimensions for subland twist drills with parallel shanks
攻丝前钻孔用阶梯麻花钻 第2部分: 莫氏锥柄阶梯麻花钻的型式和尺寸 Subland twist drills for holes prior to tapping screw threads Part 2: The types and dimensions for subland twist drills with Morse shanks
阶梯麻花钻 技术条件 Subland twist drills--Technical specifications
钎料型号表示方法 Filler metal for soft soldering and brazing--Designation
凿岩机械与气动工具名词术语 Terminology of rock drilling machines and pneumatic tools
夹扭钳和剪切钳 术语 Pliers and nippers--Nomenclature
夹扭钳和剪切钳 通用技术条件 Pliers and nippers--General technical requirements
夹扭钳和剪切钳 试验方法 Pliers and nippers--Methods of test
杠杆齿轮比较仪 Mechanical dial comparators
直柄燕尾槽铣刀和直柄反燕尾槽铣刀 Dovetail and inverse dovetail milling cutters with plain parallel shanks
削平型直柄燕尾槽铣刀和削平型直柄反燕尾槽铣刀 Dovetail and inverse dovetail milling cutters with flatted parallel shanks
直柄燕尾槽铣刀和直柄反燕尾槽铣刀技术条件 Dovetail and inrerse dovetail milling cutters with parallel shanks technical specificatians
球面半径 Radii of sphere surfaces
润滑槽 Lubricating grooves
滚花 Knurl
零件倒圆与倒角 Rounding and chamferd of parts
砂轮越程槽 Relief grooves for grinding wheels
人造金刚石和立方氮化硼 品种 Types of synthetic diamond and cubic boron nitride
超硬磨料 金刚石或立方氮化硼颗粒尺寸 Super abrasive--Grain sizes of diamond or cubic boron nitride
立方氮化硼技术条件 Technical requirements for cubic boron nitride
超硬磨具和锯 形状总览、标记 Superhard abrasive products and saws---General survey designation
超硬磨料制品 金刚石或立方氮化硼磨具 形状和尺寸 Abrasive products--Diamond or cubic boron nitride grinding tools--Form and dimensions
金钢石或立方氮化硼磨具 带柄油石 Diamond or cubic boron nitride--Hand sticks
金刚石或立方氮化硼磨具 标志和包装 Marking and packing for diamond or cubic boron nitride abrasive products
影响钢熔化焊接头质量的技术因素 Technical factors influencing the quality of the fusion welded joints in steel
金属熔化焊焊缝缺陷分类及说明 Classification of imperfections in metallic fusion welds, with explanations
铜基钎料 Copper base brazing filler metals
金属覆盖层 对底材为阴级的覆盖层 腐蚀试验后的电镀试样的评级 Metallic coatings--Coatings cathodic to the substrate--Rating of electro-plated test specimens subjected to corrosion tests
金属和氧化物覆盖层 横断面厚度显微镜测量方法 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method
金属和其他无机覆盖层 厚度测量方法评述 Metallic and other non-organic coatings--Review of methods of measurement of thickness
金属及其覆盖层 大气腐蚀试验 现场试验的一般要求 Metals and its coatings--Atmospheric corrosion testing--General requirements for field tests
金属和其他无机覆盖层 腐蚀膏腐蚀试验 (CORR试验) Metallic and other non-organic coatings--Corrodkote corrosion test(CORR test)
电沉积铬层 电解腐蚀试验(EC试验) Electrodeposited chromium coatings--Electrolytic corrosion testing (EC test)
卧轴矩台平面磨床 参数 Surface grinding machines with horizontal spindle and rectangular table--Parameters
无心外圆磨床参数 External cylindrical centerless grinding machines--Parameters
内圆磨床参数 Internal cylindrical grinding machines--Parameters
立式内拉床 精度检验 Vertical internal broaching machines--Testing of the accuracy
立式外拉床 精度检验 Vertical surface broaching machines--Testing of the accuracy
导轨磨床参数 Surface grinding machines for grinding slideways--Parameters
立轴矩台平面磨床精度 Surface grinding machines with vertical grinding wheel spindle and reciprocating table--Testing of the accuracy
金属切削机床术语 基本术语 Terminology for metal-cutting machine tools--Basic terminology
金属切削机床术语 组合机床及组合机床自动线(2000年5月废止) Terminology for metal-cutting machine tools--Modular machine tools and transfer lines
金属切削机床术语 车床 Terminology for metal-cutting machine tools--Lathes
金属切削机床术语 钻床 Terminology for metal-cutting machine tools--Drilling machines
金属切削机床术语 镗床 Terminology for metal-cutting machine tools--Boring machines
金属切削机床术语 磨床 Terminology for metal-cutting machine tools--Grinding machines
金属切削机床术语 齿轮加工机床 Terminology for metal-cutting machine tools--Gear cutting machines
金属切削机床术语 螺纹加工机床 Terminology for metal-cutting machine tools--Threading machines
金属切削机床术语 铣床 Terminology for metal-cutting machine tools--Milling machines
金属切削机床术语 刨床和插床 Terminology for metal-cutting machine tools--Planing and slotting machines
金属切削机床术语 拉床 Terminology for metal-cutting machine tools--Broaching machines
金属切削机床术语 锯床 Terminology for metal-cutting machine tools--Sawing machines
金属切削机床术语 刻线机 Terminology for metal-cutting machine tools--Dividing machines
金属切削机床术语 管子加工机床 Terminology for metal-cutting machine tools--Pipe cutting machines
金属切削机床术语 机床附件 Terminology for metal-cutting machine tools--Machine tool accessory
直接电弧炉的试验方法 Test methods for direct arc furnaces
钢铁工件涂装前磷化处理技术条件 Specifications for phosphating treatment of iron and steel parts before painting
铝及铝合金阳极氧化着色阳极氧化膜耐晒度的人造光加速试验 Anodizing of aluminium and its alloys--Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
人造金刚石微粉和立方氮化硼微粉 品种 Types of synthetic diamond micropowder and cubic boron nitride micropowder
T型角焊接头弯曲试验方法 Method of bend test for T type fillet welded joint
铸造用硅砂化学分析方法 Methods for chemical analysis of silica sand for foundry
电烙铁 Electric soldering irons
双端面磨床参数 Double disc surface grinding machines?Parameters
金属热处理工艺术语 Terminology of metal heat treatment
埋弧炉试验方法 Test methods for submerged-arc furnaces
具有电子枪的电热设备试验方法 Test methods for electroheating installations with electron guns
搪瓷名词术语 Terms of vitreous and porcelain enamels
角向磨光机 Electric angle grinders
电锤 Electric rotary hammers
多个控制器在-CAMAC机箱中 Multiple controllers in a CAMAC crate
CAMAC串行信息公路接口系统 CAMAC-Serial highway interface systems
CAMAC子程序 Subroutines for CAMAC
立轴矩台平面磨床 参数 Surface grinding machines with vertical grinding wheel spindle and reciprocating table--Parameters
光学曲线磨床 参数 Optical projection profile grinding machines--Parameters
电火花线切割机参数 Parameters of wire cut electric discharge machines
电火花线切割机精度 Accuracy of wire cut electric discharge machines
搪玻璃层耐温差急变性试验方法 Test methods for thermal shock resistance of glass-lined layer
搪玻璃釉耐热氢氧化钠溶液腐蚀性能的测定 Determination of resistance to hot sodium hydroxide of vitreous enamel
搪玻璃釉耐沸腾盐酸腐蚀性能的测定 Determination of resistance to boiling hydrochloric acid of vitreous enamel
搪玻璃层耐机械冲击试验方法 Impact test method of glass-lined layer
搪玻璃层的厚度测量 电磁法 Method for measuring the thicknees of glass-lined layer by electromagnetic meter
用在腐蚀条件下的搪玻璃设备的高电压试验方法 Test method of glass-lined equipment for service under corrosive conditions by high voltage
搪玻璃设备水压试验方法 Hydraulic pressure test of glass-lined equipments
搪玻璃设备气密性试验方法 Air seal test method of glass-lined equipments
搪玻璃容器公称容积与公称直径 Nominal volume and nominal diameter for glass-lined vessel
铸造锡铅焊料 Casting tin-lead solders
铝及铝合金阳极氧化 阳极氧化膜的总规范 Anodizing of aluminium and aluminium alloys--General specifications for anodic oxidation coatings
铝及铝合金阳极氧化 阳极氧化膜厚度的定义和有关测量厚度的规定 Anodizing of aluminium and aluminium alloys--Definitions thickness of anodic oxidation coatings and conventions concerning the measurement of thickness
铝及铝合金阳极氧化膜厚度的试验方法 重量法 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Gravimetric method
铝及铝合金阳极氧化膜厚度的试验方法 分光束显微法 Test methods for thickness of anodic oxidation coatin-gs on aluminium and aluminium alloys--Split-beam mic-roscope method
滚齿机 精度检验 Acceptance conditions for gear hobbing machines--Testing of the accuracy
气体保护电弧焊用碳钢、低合金钢焊丝 Welding wires for gas shielding arc welding of carbon and low alloy steels
电弧焊机通用技术条件 The general specification for arc welding machines
热处理工艺材料名词术语 The terminology of technological materials for heat treatment
工业自动化系统 机床数值控制 词汇 Industrial automation systems--Numerical control of machines--Vocabulary
铑电镀液 The rhodium eletroplating solution
电阻焊设备的额定值与运行条件 Rating of resistance welding equipment
斧的通用技术条件 Axes--General technical requirements
焊条用还原钛铁矿粉中亚铁量的测定 Determination of ferrous iron content in reduced ilmenite powder for welding rod
锻压术语 Terminolgy of forging and stamping
钎缝强度试验方法 Method of the strength test for brazed and soldered seam
金属管状远红外辐射加热器 Metal tube far infraed heater
铝及铝合金阳极氧化 薄阳极氧化膜连续性的检验 硫酸铜试验 Anodizing of aluminium and aluminium alloys--Check of continuity of thin anodic oxide coatings--Copper sulphate test
铝及铝合金阳极氧化 阳极氧化膜封闭后吸附能力的损失评定 酸处理后的染色斑点试验 Anodizing of aluminium and aluminium alloys--Estimation of loss of absorptive power of anodic oxide coatings after sealing--Dye spot test with prior acid treatment
铝及铝合金阳极氧化 应用击穿电位测定法检验绝缘性 Anodizing of aluminium and aluminium alloys--Insulation check by measurement of breakdown potential
压铸模技术条件 Specification of the die-casting dies
冲模术语 Terminology for dies
塑料成型模具术语 Terminology of mould for plastics
压力铸造模具术语 Terminology for die-casting die
机床数字控制 点位、直线运动和轮廓控制系统的数据格式 Numerical control of machines--Data format for positioning ,line motion and contouring control systems
涂装前钢材表面锈蚀等级和除锈等级 Rust grades and preparation grades of steel surfaces before application of paints and related products
精密插齿机精度 Precision gear shaping machines?Testing of the accuracy
金属切削机床通用技术条件 General specifications for metal-cutting machine tools
硬质合金错齿三面刃铣刀 Side and face milling cutters with double alternate helical teeth with carbide tips
电动工具型号编制方法 Types organization method for electric tools
开式压力机 精度 Open front mechanical power presses?Testing of the accuracy
四柱液压机 精度 Four-column hydraulic presses - Testing of the accuracy
花键轴铣床 精度 Splint hobbing machines - Testing of the accuracy
固定顶尖 参数 Dead centre - Parameter
固定顶尖 精度 Dead centre - Testing of the accuracy
固定顶尖 技术条件 Dead centre - Specification
镶片齿轮滚刀 Insterted blaeds gear hobs
硬质合金圆柱形旋转锉 Cylindrical hardmetal burrs
硬质合金圆柱形球头旋转锉 Cylindrical round-(ball-) nose hardmetal burrs
硬质合金圆球形旋转锉 Spherical hardmetal hurrs
硬质合金椭圆形旋转锉 Oval hardmetal burrs
硬质合金弧形圆头旋转锉 Arch round-(ball-) nose hardmetal burrs
硬质合金弧形尖头旋转锉 Arch pointed-nose hardmetal burrs
硬质合金火炬形旋转锉 Flame hardmetal burrs
硬质合金60°和90°圆锥形旋转锉 60°and 90°cone hardmetal burrs
硬质合金锥形圆头旋转锉 Conical round-(ball-) nose hardmetal burrs
硬质合金锥形尖头旋转锉 Conical pointed-nose hardmetal burrs
硬质合金倒锥形旋转锉 Inverted cone hardmetal burrs
硬质合金旋转锉技术条件 Hardmetal burrs technical specifications
工业过程测量和控制系统用自动平衡式记录仪和指示仪 Self-balance recorders and indicators for use in industrial-process measurement and control systems
涂附磨具用磨料 粒度分析 第1部分: 粒度组成 Coated abrasives--Grain size analysis--Part 1: Grain size distribution test
涂附磨具用磨料 粒度分析 第2部分: 粗磨粒P12?P220粒度组成的测定 Coated abrasives--Grain size analysis--Part 2: Determination of grain size distribution of macrogrits P12 to P220
涂附磨具用磨料 粒度分析 第3部分: 微粉P240 - P2500粒度组成的测定 Coated abrasives--Grain size analysis--Part 3: Determination of grain size distribution of microgrits P240 to P2500
用于工业过程控制 实时FORTRAN Industrial real-time FORTRAN--Application for the control of industrial processes
信息处理 数据存储设备用磁盘盘片 外径 200mm、内径63.5mm、每道96000 次磁道翻转 Information processing--Magnetic disk for data storage devices-96000 flux transitions per track,200mm outer diameter, 63.5mm inner diameter
信息处理 数据存储设备用磁盘盘片 外径 210mm、内径 100mm、每道158000次磁道翻转 Information processing--Magnetic disk for data storage devices-158000 flux transitions per track, 210mm outer diameter, 100mm inner diameter
信息处理 数据交换用130mm 改进调频制记录的位密度为7958磁道翻转/ 弧度、道密度为1.9道/毫米的双面软磁盘 第一部分 尺寸、物理性能和磁性能 Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1.9tpmm, on both sides--Part 1: Dimensional, physical and magnetic characteristics
信息处理 数据交换用 130mm改进调频制记录的位密度为7958磁道翻转/ 弧度、道密度为1.9道/毫米的双面软磁盘 第二部分 磁道格式A Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1.9tpmm, on both sides--Part 2: Track format A
信息处理 数据交换用 130mm改进调频制记录的位密度为7958磁道翻转 /弧度、道密度为1.9道/毫米的双面软磁盘 第三部分 磁道格式B Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1.9tpmm, on both sides--Part 3: Track format B
铸造用硅砂 Foundry s, ilica sand
焊接用插销冷裂纹试验方法 Welding--Cold cracking test method using implants
焊接接头疲劳裂纹扩展速率试验方法 Test method for fatigue crack growth rates of welded joints
焊接与切割安全 Safety in welding and cutting
钢件渗碳淬火有效硬化层深度的测定和校核 Determination and verification of the effective depth of carburizod and hardened cases of steel parts
钢件薄表面总硬化层深度或有效硬化层深度的测定 Determination of total or effective thickness of thin surface hardened layers of steel parts
热处理炉有效加热区测定方法 Testing method for working zone of heat treating furnace
锻模及其零件术语 Terminology of forging dies and elements
铜及铜合金焊丝 Welding wire and rods of copper and copper alloys
摇臂钻床参数 Radial drilling machines--Parameters
分散型过程控制系统用工业过程数据公路 总论 Process data highway, type C (PROWAY C), for distributed process control systems--Overview
分散型过程控制系统用工业过程数据公路 功能要求 Process data highway, type C (PROWAY C), for distributed process control systems--Functional requirements
分散型过程控制系统用工业过程数据公路 与工业过程数据公路的接口 Process data highway, type C (PROWAY C), for distributed process control systems--The interface to PROWAY
分散型过程控制系统用工业过程数据公路 工业过程数据公路链路控制 (PLC) 子层 Process data highway, type C (PROWAY C), for distributed process control systems--The PROWAY link control (PLC)sublayer
分散型过程控制系统用工业过程数据公路 PLC-MAC 接口和服务规范 Process data highway, type C (PROWAY C), for distributed process control systems--PLC-MAC interface and service specification
分散型过程控制系统用工业过程数据公路 媒体送取控制 (MAC)子层 Process data highway, type C (PROWAY C), for distributed process control systems--The medium access control (MAC) sublayer
分散型过程控制系统用工业过程数据公路 MAC-物理层接口和规范 Process data highway, type C (PROWAY C), for distributed process control systems--MAC-Physical layer interface specification
分散型过程控制系统用工业过程数据公路 单信道相位连续 FSK物理 (PHY)层及其与媒体接口的规范 Process data highway, type C (PROWAY C), for distributed process control systems--Specification of the single channel phase-continuous-FKS physical (PHY) layer and its interface to the medium
分散型过程控制系统用工业过程数据公路 单信道同轴电缆总线媒体“层”技术规范 Process data highway, type C (PROWAY C), for distributed process control systems--Single-channel coaxial-cable bus medium"layer"specification
分散型过程控制系统用工业过程数据公路 工业过程数据公路管理 Process data highway, type C (PROWAY C), for distributed process control systems--PROWAY management
金属和其他非有机覆盖层 通常凝露条件下的二氧化硫腐蚀试验 Metallic and other non-organic coatings--Sulfur dioxide test with general condensation of moisture
金属覆盖层及其他有关覆盖层 维氏和努氏显微硬度试验 Metallic and related coatings--Vickers and Knoop microhardness tests
锌和镉上铬酸盐转化膜试验方法 Chromate conversion coatings on zinc and cadmium--Test methods
金属材料上的转化膜 单位面积上膜层质量的测定 重量法 Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
金属和其他无机覆盖层 热喷涂 锌、铝及其合金 Metallic and other inorganic coatings--Thermal spraying--Zinc、aluminium and their alloys
金属覆盖层 镍+铬和铜+镍+铬电沉积层 Metallic coatings--Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium
金属覆盖层 镍电沉积层 Metallic coatings--Electrodeposited coatings of nickel
金属覆盖层 钢铁上的锌电镀层 Metallic coatings--Electroplated coatings of zinc on iron or steel
电镀锌和电镀镉层的铬酸盐转化膜 Chromate conversion coatings on electroplated zinc and cadmium coatings
搪瓷耐碱性能测试方法 Test method for alkali resistance of porcelain enamels
搪瓷耐室温柠檬酸性能测试方法 Vitreous and porcelain enamels--Determination of resistance to citric acid at room temperature
铸铁焊条及焊丝 Covered electrodes and welding rods for welding cast iron
碳钢药芯焊丝 Carbon steel flux cored electrodes for arc welding
银钎料 Silver filler metals for brazing
电热设备的试验方法 间接电阻炉 Test methods for electroheat installations - Indirect resistance furnaces
电热设备基本技术条件 通用部分 Basic specifications for electroheat installations--General
电热设备基本技术条件 炼钢电弧炉 Basic specifications for electroheat installations--Steelmaking arc furnaces
电热设备基本技术条件 感应电热设备 Basic specifications for electroheat installations--Induction electroheat installations
电热设备基本技术条件 间接电阻炉 Basic specifications for electroheat installations--Indirect resistance furnaces
电热设备基本技术条件 高频介质加热设备 Basic specifications for electroheat installations--high frequency dielectric heating installations
人造气氛腐蚀试验 盐雾试验 Corrosion tests in artificial atmospheres--Salt spray tests
滚齿机 参数 Gear hobbing machines--Parameters
弧焊变压器防触电装置 Arc welding transformer hazard reducing device
电焊机型号编制方法 The organization of model for electric welding machinees
锡铅焊料化学分析方法 碘酸钾滴定法测定锡量 Tin-lead solders - Determination of tin content - Potassium iodate titrimetric method
锡铅焊料化学分析方法 孔雀绿分光光度法测定锑量 Tin-lead solders - Determination of antimony content - Malachite green spectrophotometric method
锡铅焊料化学分析方法 溴酸钾滴定法测定锑量 Tin-lead solders - Determination of antimony content - Potassium bromate titrimetric method
锡铅焊料化学分析方法 硫脲分光光度法测定铋量 Tin-lead solders - Determination of bismuth content - Thiourea spectrophotometric method
锡铅焊料化学分析方法 1,10 -二氮杂菲分光光度法测定铁量 Tin-lead solders - Determination of iron content - 1,10-phenanthroline spectrophotometric method
锡铅焊料化学分析方法 砷锑钼蓝分光光度法测定砷量 Tin-lead solders - Determination of arsenic content - Molybdoantimony-arsenate blue spectrophotometric method
锡铅焊料化学分析方法 2,9-二甲基-1,10-二氮杂菲分光光度法测定铜量 Tin-lead solders - Determination of copper content - 2,9-dimethyl-1,10-phenanthroline spectrophotometric method
锡铅焊料化学分析方法 火焰原子吸收光谱法测定银量 Tin-lead solders - Detemination of silver content - Flame atomic absorption spectrophotometric method
锡铅焊料化学分析方法 电位滴定法测定银量 Tin-lead solders - Determination of silver content - Potentiometric titrimetric method
锡铅焊料化学分析方法 火焰原子吸收光谱法测定锌量 Tin-lead solders - Determination of zinc content - Flame atomic absorption spectrophotometric method
锡铅焊料化学分析方法 铬天青S-聚乙二醇辛基苯基醚分光光度法测定铝量 Tin-lead solders - Determination of aluminum content - Chrome azurol S-polyethylene glycol oetyl phenyl ether spectrophotometric method
锡铅焊料化学分析方法 催化示波极谱法测定镉量 Tin-lead solders - Determination of cadmium content - Catalytic oscillopolarographic method
锡铅焊料化学分析方法 磷钒钼杂多酸 -结晶紫分光光度法测定磷量 Tin-lead solders - Determination of phosphorus content - Phosphor-vanadium-molybdium poly acid-crystal violet spectrophotometric method
锡铅焊料化学分析方法 蒸馏示波极谱法测定硫量 Tin-lead solders?Determination of sulphur content - Oscillopolarographic method after distillation
螺钉旋具通用技术条件 Screwdrivers - General technical requirements
螺钉旋具试验方法 Screwdrivers - Test methods
铜合金工具防爆性能试验方法 Testing method of copper alloy tools for explosive atmospheres
铝及铝合金焊丝 Aluminium and aluminium alloy welding rods and wires
镍基钎料 Nickel base brazing filler metals
锻压机械 精度检验通则 Acceptance code of accuracy for metalforming machine
闭式单点压力机 精度 Straight sided one-point mechanical presses - Testing of the accuracy
立轴圆台平面磨床 参数 Surface grinding machines with vertical grinding wheel spindle and round table - Parameters
铲齿车床精度 Relieving lathes - Testing of the accuracy
花键轴磨床 参数 Spline shaft grinding machines - Parameters
闭式双点压力机 精度 Straight sided two-point mechanical presses - Testing of the accuracy
自动换刀机床用7:24圆锥工具柄部40、45和50号圆锥柄 Tool shanks with 7:24 taper for automatic tool changers - Shanks Nos. 40, 45 and 50
自动换刀机床用7:24圆锥工具柄部40、45和50号圆锥柄用拉钉 Tool shanks with 7:24 taper for automatic tool changers - Retention knobs for shanks Nos. 40, 45 and 50
硬质合金锥柄麻花钻 Taper shank twist drills with carbide tips
硬质合金麻花钻通用技术条件 General technical specifications for twist drill with carbide tips
硬质合金直柄T形槽铣刀 Parallel shank T-slot cutters with carbide tips
硬质合金锥柄T形槽铣刀 Taper shank T-slot cutters with carbide tips
矩形花键滚刀 Hobs for parallel side splines
机夹切断车刀 Cutting-off tools for turning with clamp tips
机夹外螺纹车刀 Turning tools for external threads with clamp tips
机夹内螺纹车刀 Turning tools for internal threads with clamp tips
DDZ-Ⅲ系列电动单元组合仪表 计算器 DDZ-Ⅲ series process electronic control system - Computing unit
DDZ-Ⅲ系列电动单元组合仪表 调节器 DDZ-Ⅲ series process electronic control system - Controller
DDZ-Ⅲ系列电动单元组合仪表 配电器 DDZ-Ⅲ series process electronic control system - Distributor
铝及铝合金阳极氧化 术语 Anodizing of aluminium and aluminium alloys - Terms
铝及铝合金阳极氧化 阳极氧化膜的封孔质量的测定方法 导纳法 Anodizing of aluminium and its alloys - Determination of quality of sealed anodic oxide coatings - Admittance method
复合金属覆层厚度的测定 金相法 Method for measuring thickness of coated layer on composite metal - The metallographic method
复合金属覆层厚度的测定 X荧光法 Method for measuring thickness of coated layer on composite metal - The X-ray fluorescent method
复合金属覆镍层厚度的测定 容量法 Method for measuring thickness of nickel-coated layer on composite metal - The volumetry
复合金属覆铝层厚度的测定 重量法 Method for measuring thickness of aluminium-coated layer on composite metal - The gravimetric method
金刚石圆锯片 Diamond circular saw blades
工业机器人 安全规范 Industrial robots--Safety specification
数字控制机床的数控处理程序 输出2000型记录辅元素 (后置处理命令) Numerical control of machines-NC processor output - Minor elements of 2000-type records (post-processor commands)
钢焊缝手工超声波探伤方法和探伤结果分级 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
机械导纳的试验确定 基本定义与传感器 Experimental determination of mechanical mobility - Basic definitions and transducers
机械导纳的试验确定 用激振器作单点激励测量 Experimental determination of mechanical mobility - Measurments using single-point translation excitation with and attached vibration exciter
机械导纳的试验确定 冲击激励法 Experimental determination of mechanical mobility--Measurements using impact excitation
钎焊接头强度试验方法 Methods of the strength tests for brazed and soldered joint
钎料铺展性及填缝性试验方法 Test method of spreadability and clearance filling ability for filler metal
热喷涂金属件表面预处理通则 The general principle of surface preparation of metallic substrate for thermal spraying
热喷涂涂层厚度的无损测量方法 Thermal spraying coating Nondestructive methods for measurement of thickness
金属和其他无机覆盖层 热喷涂 操作安全 Metallic and other inorganic coatings--Thermal spraying--Safe practices
金属的磷酸盐转化膜 Phosphate conversion coatings for metals
金属和其他无机覆盖层储存条件下腐蚀试验的一般规则 Metallic and other non-organic coatings-General rules for corrosion tests applicable for storage conditions
金属覆盖层厚度 轮廓尺寸测量方法 Metallic coatings-Measurement of coating thickness--Profilometric method
金属覆盖层 工程用铬电镀层 Metallic coatings - Electroplated coatings of chromium for engineering purposes
搪瓷耐热性测试方法 Determination of resistance to heat of vitreous and porcelain enamels
搪瓷耐温急变性测试方法 Determination of resistance to thermal shock of vitreous and porcelain enamels
搪瓷光泽测试方法 Measurement of specular gloss of vitreous and porcelain enamels
模锻锤和大型机械锻压机用模块技术条件 Large die-blocks used for die-forging hammer and mechanical forging press--Specification
数子控制机床的数控处理程序输出 逻辑结构 Numerical control of machines - NC processor output - Logical structure
机器 轴高 Machines - Shaft heights
金属覆盖层 金和金合金电镀层的试验方法 第六部分:残留盐的测定 Metallic coating--Test methods for electrodeposited gold and gold alloy coatings-Part 6: Determination of the presence of residual salts
金属覆盖层 银和银合金电镀层的试验方法 第三部分:残留盐的测定 Metallic coatings--Test methods for electrodeposited silver and silver alloy coatings--Part 3: Determination of the presence of residual salts
金属覆盖层 工程用铜电镀层 Metallic coatings - Electroplated coatings of copper for engineering purposes
金属覆盖层 工程用镍电镀层 Metallic coatings - Electroplated coatings of nickel for engineering purposes
金属和其他非有机覆盖层--关于厚度测量的定义和一般规则 Metallic and other inorganic coatings--Definitions and conventions concerning the measurement of thickness
金属覆盖层 对底材呈阳极性的覆盖层腐蚀试验后的试样评级 Metallic coatings - Coatings anodic to the substrate - Rating of test specimens subjected to corrosion tests
焊接质量要求 金属材料的熔化焊 第一部分: 选择及使用指南 Quality requirements for welding--Fusion welding of metallic materials--Part 1: Guidelines for selection and use
焊接质量要求 金属材料的熔化焊 第二部分: 完整质量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 2: Comprehensive quality requirements
焊接质量要求 金属材料的熔化焊 第三部分: 一般质量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 3: Standards quality requirements
焊接质量要求 金属材料的熔化焊 第四部分: 基本质量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 4: Elementary quality requirements
焊接质量保证 钢熔化焊接头的要求和缺陷分级 Quality assurance of welding?Requirement for fusion welding joint of steel and classification for imperfection
低合金钢埋弧焊用焊剂 Fluxes for the submerged arc welding of low alloy steel
塑料注射模技术条件 Specification of injection mould for plastics
塑料注射模大型模架 标准模架 Injection mould for plastic large-size mould bases - Standard mould bases
塑料注射模大型模架 技术条件 Injection mould for plastic large-size mould bases - Specification
塑料注射模大型模架 座板 Injection mould for plastic large-size mould bases - Elamping plates
塑料注射模大型模架 模板 Injection mould for plastic large-size mould bases - Mould plates
塑料注射模大型模架 支承板 Injection mould for plastic large-size mould bases - Support plates
塑料注射模大型模架 推板 Injection mould for plastic large-size mould bases - Ejector plates
塑料注射模大型模架 垫块 Injection mould for plastic large-size mould bases - Spacer plates
塑料注射模大型模架 带头导柱 Injection mould for plastic large-size mould bases - Guide pillars with head
塑料注射模大型模架 有肩导柱 Injection mould for plastic large-size mould bases - Guide pillars with shoulder
塑料注射模大型模架 推板导柱 Injection mould for plastic large-size mould bases - Guide pins for ejector plater
塑料注射模大型模架 直导套 Injection mould for plastic large-size mould bases - Straight guide bushes
塑料注射模大型模架 推板导套 Injection mould for plastic large-size mould bases - Guide bushes with head
塑料注射模大型模架 复位杆 Injection mould for plastic large-size mould bases - Return pins
塑料注射模大型模架 衬套 Injection mould for plastic large-size mould bases - Iiner bushes
塑料注射模中小型模架 Injection mould for plastic--Medium size and small size mould bases
塑料注射模中小型模架技术条件 Injection mould for plastic - Specifications for medium size and small size mould bases
金属覆盖层 锡电镀层 Metallic coatings - Electroplated coatings of tin
金属覆盖层 塑料上铜+镍+铬电镀层 Metallic coatings - Electroplated coatings of copper plus nickel plus chromium on plastics materials
金属热处理工艺分类及代号 Classification and designation on metal heat treatment
钢管环缝熔化焊对接接头射线透照工艺和质量分级 Methods of radiographic inspection and quality classification of circumferential fusion welded butt joints in steel pipes and tubes
热喷涂涂层设计命名方法 Designation for the design of thermal spraying coatings
热喷涂涂层材料命名方法 Designation of the materials for thermal spraying coatings
电沉积金属覆盖层和有关精饰计数抽样检查程序 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes
塑料上电镀层 热循环试验 Electroplated coatings on plastics materials - Thermal cycling test
金属零(部)件镀覆前质量控制技术要求 Technical requirements of quality control for metal parts to be coated
多功能钢铁表面处理液通用技术条件 General specification for multifunctional solution of steel and iron surface treatment
工业机器人 性能规范及其试验方法 Industrial robots--Performance criteria and related test methods
工业机器人 词汇 Industrial robots--Vocabulary
工业机器人 特性表示 Industrial robots--Presentation of characteristics
数字控制机床的数控处理程序输入 基本零件源程序参考语言 Numerical control of machines - NC processor input - Basic part program reference language
铝及铝合金阳极氧化 用喷磨试验仪测定阳极氧化膜的平均耐磨性 Anodizing of aluminium and aluminium alloys - Measurement of mean specific adrasion resistance of anodic oxidation coatings with an adrasive jet test apparatus
铝及铝合金阳极氧化 用轮式磨损试验仪测定阳极氧化膜的耐磨性和磨损系数 Anodizing of aluminium and aluminium alloys - Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
铝及铝合金阳极氧化 氧化膜的铜加速醋酸盐雾试验 (CASS试验) Anodizing of aluminium and aluminium alloys - Copper accelerated acetic acid salt spray test for anodic oxide coatings (CASS test)
铝及铝合金阳极氧化 着色阳极氧化膜耐紫外光性能的测定 Anodizing of aluminium and aluminium alloys - Determination of the fastness to ultraviolet light of coloured anodic oxide coatings
铝及铝合金阳极氧化 用变形法评定阳极氧化膜的抗破裂性 Anodizing of aluminium and aluminium alloys - Assessment of resistance of anodic oxide coatings to cracking by deformation
埋弧焊机 Submerged arc welding machine
电弧焊机噪声测定方法 Determination for noise emitted by arc welding machines
金属热喷涂层剪切强度的测定 Thermal sprayed metallic coatings - Determination of shear strength
工业过程测量和控制用检测仪表和显示仪表精确度等级 Accuracy class of measuring instruments and display instruments for industrial process measurement and control
涂层硬质合金分类和涂层主要技术要求 Classification of coated hardmetal and main technical specifications for coating
锅炉受压元件焊接接头机械性能试验方法 Boiler pressure parts - Mechanical test for welded joints
钢铁件涂装前除油程度检验方法 (验油试纸法) The standard method of identification of degreaasing degree on the steel surfaces before covering organic coatings (Test paper method)
金属覆盖层 低氢脆镉钛电镀层 Metal coating - Cd-Ti plating of low hydrogan embrittlement
热处理设备术语 Terminology of heat treatment installation
金属覆盖层 钢铁上的镉电镀层 Metallic coatings?Electroplated coatings of cadmium on iron and steel
工业控制用软件评定准则 Criteria for the evaluation of software used for industry control
对接焊接头宽板拉伸试验方法 Method of wide plate tension test for butt welded joint
钢锤通用技术条件 Steel hammers - General technical requirements
接触食物搪瓷制品 Enamelled ware in contact with food
接触食物搪瓷制品铅、镉析出量测试方法 Standard test method for lead and cadmium released from enamelled ware in contact with food
电热用等离子设备试验方法 Test methods of plasma installations for electroheat applications
金属切削机床 静刚度检验通则 Metal-cutting machine tools - Test code for static rigidity
工业过程测量和控制系统用模拟输入数字式指示仪 Digital indicators with analogue input for use in industrial-process measurement and control systems
锰基钎料 Manganese base brazing filler metals
磁性和非磁性基体上镍电镀层厚度的测量 The measurement of coating thickness for electrodeposited nickel coatings on magnetic and non-magnetic substracts
镍及镍合金焊条 Nickel and nickel alloy covered welding electrodes
铝基钎料 Aluminium base brazing filler metals
焊接接头脉动拉伸疲劳试验方法 Test method for pulsed tensile fatigue of welded joints
对接接头刚性拘束焊接裂纹试验方法 Method of rigid restraint cracking test for welding butt joint
金属覆盖层 黑色金属材料热镀锌层的质量测定 称量法 Metallic coatings--Determination of the mass for hot dip galvanized coatings on ferrous materials--Gravimetric method
湿式(非金属类)摩擦材料 Wet type (non-metallic)friction materials
金属镀覆和化学处理表示方法 Expression methods for metallic coating and chemical treatment
金属覆盖层 钢铁制品热镀锌层 技术要求 Metallic coatings--Hot dip galvanized coatings on fabricated ferrous products--Specification
自催化镍-磷镀层 技术要求和试验方法 Autocatalytic nickel-phosphorus coating--Specification and test methods
电动工具控制仪的安全 Safety of controllers for electric tools
可移式电动工具的安全 第一部分: 一般要求 Safety of transportable motor-operated electric tools--Part 1: General requirements
可移式电动工具的安全 圆锯的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for circular saws
可移式电动工具的安全 摇臂锯的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for radial arm saws
可移式电动工具的安全 平刨和厚度刨的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for planers and thicknessers
可移式电动工具的安全 台式砂轮机的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for bench grinders
可移式电动工具的安全 带锯的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for band saws
可移式电动工具的安全 第二部分: 带水源金刚石钻的专用要求 Safety of transportable motor-operated electric tools--Part 2: Particular requirements for diamond drills with water supply
可移式电动工具的安全 第二部分: 带水源金刚石锯的专用要求 Safety of transportable motor-operated electric tools--Part 2: Particular requirements for diamond saws with water supply
可移式电动工具的安全 第二部分: 斜切割机的专用要求 Safety of transportable motor-operated electric tools--Part 2: Particular requirements for mitre saws
可移式电动工具的安全 第二部分: 单轴立式木铣的专用要求 Safety of transportable motor-operated electric tools Part 2: Particular requirements for single spindle vertical moulders
可移式电动工具的安全 第二部分: 型材切割机的专用要求 Safety transportable motor-operated electric tools Part 2: Particular requirements for cutting-off grinders
可移式电动工具的安全 第二部分: 高压清洗机的专用要求 Safety of transportable motor-operated electric tools Part 2: Particular requirements for high pressure cleaners
轻工机械通用技术条件 General specifications for light industry machinery
点焊机器人通用技术条件 General specifications of spot-welding robots
工业机器人通用技术条件 Industrial robots--General specifications
可转位内孔车刀 Boring bars for indexable inserts
可转位螺旋立铣刀 Helical end milling cutters with indexable inserts
可转位螺旋沟浅孔钻 Spiral flute drill with indexable inserts
可转位直沟浅孔钻 Straight flute drill with indexable inserts
整体硬质合金锯片铣刀 Solid carbide slitting cutters
牛头刨床 精度 shaping machines--Testing of the accuracy
超精油石 Superfinishing stone
陶瓷结合剂强力珩磨油石 Vitrified force-honing stone
刚玉磨料中α-Al2O3相X射线定量测定方法 Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer
普通磨料精微粉(W3.5 - W0.5)粒度组成测定方法 Determination for grain size distribution of microgrits W3.5 to W0.5 of conventional abrasive
直柄粗加工立铣刀 型式与尺寸 Roughing end mill with parallel shank types and dimensions
削平型直柄粗加工立铣刀 型式与尺寸 Roughing end mill with flatted parallel shank types and dimensions
莫氏锥柄粗加工立铣刀 型式与尺寸 Roughing end mill with morse taper shank types and dimensions
粗加工立铣刀 技术条件 Roughing end mills technical specifications
平刀体键槽拉刀 型式与尺寸 Flat body keyway broach types and dimensions
加宽平刀体键槽拉刀 型式与尺寸 Widened flat body keyway broach types and dimensions
带倒角齿键槽拉刀 型式与尺寸 Keyway broach with chamfer types and dimensions
键槽拉刀通用技术条件 Technical specifications for keyway broaches
硬质合金机夹三面刃铣刀 Machanically clamped carbide side milling cutters
自动卷簧机 精度 Automatic spring winding machine--Testing of the accuracy
硬质合金喷吸钻 Ejector drills with carbide tips
盘形剃齿刀 Rotary gear shaving cutters
开式压力机 型式与基本参数 Open front mechanical power presses--Types and basic parameters
双圆弧齿轮滚刀 型式和尺寸 The basic types and dimensions of hobs for double--circular-arc gear
双圆弧齿轮滚刀 技术条件 The general technical specifications of hobs for double circular-arc gear
板料折弯机 精度 Press brake--Testing of the accuracy
剪板机 精度 Plate shear--Testing of the accuracy
工业机器人 圆形机械接口 Industrial robots--Circular mechanical interface
工业机器人 轴形机械接口 Industrial robots--Shaft mechanical interface
电喷枪 Electric spray guns
电磁吸盘 Electromagnetic chuck
单轴自动车床 精度 Single spindle automatic lathes--Testing of the accuracy
数控坐标镗床 精度 NC jig boring machine--Testing of the accuracy
可转位A型刀夹 Type A cartridges for indexable inserts
冲模技术条件 Specification of the press tools
塑封模具技术条件 Specification of plastic packaging mould
塑封模具尺寸公差规定 Dimensional tolerances stipulation of plastic packaging mould
焊缝无损检测符号 Nondestructive testing symbols for welds
手用钢锯条 Hand hacksaw blades
十字柄套筒扳手 Four-way socket wrenches
高频介质加热设备输出功率的测定方法 High-frequency dielectric heating installations-Test methods of the determination of power output
金属切削刀具术语 切齿刀具 Terms in metal cutting tools--Gear cutters
特种加工机床 术语 基本术语 Non-traditional machine tools--Terminology--Basic terminology
特种加工机床 术语 放电加工机床 Non-traditional machine tools--Terminology--Electro-discharge machine tools
特种加工机床 术语 电解加工机床 Non-traditional machine tools--Terminology--Electrolytic machine tools
特种加工机床 术语 超声加工机床 Non-traditional machine tools--Terminology--Ultrasonic machine tools
特种加工机床 术语 复合加工机床 Non-traditional machine tools--Terminology--Combined machining machine tools
特种加工机床 术语 其他特种加工机床 Non-traditional machine tools--Terminology--Other non-traditional machine tools
铝及铝合金阳极氧化 阳极氧化膜的封孔质量评定 磷-铬酸法 Anodizing of aluminium and its alloys--Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
铝及铝合金阳极氧化 阳极氧化膜的封孔质量评定 酸浸法 Anodizing of aluminium and its alloys--Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
铝及铝合金阳极氧化 着色阳极氧化膜色差和外观质量检验方法 目视观察法 Anodizing of aluminium and its alloys--Determination of color differences and appearance of colored anodic oxide films--Viewing method
点焊接头剪切拉伸疲劳试验方法 Test method for shear tensile fatigue of spot welded joints
涂附磨具 页状砂布砂纸 尺寸和公差 Coated abrasives--Abrasive sheets--Dimensions and tolerances
涂附磨具 卷状砂布 砂纸 尺寸和公差 Coated abrasives--Abrasive rolls--Dimensions and tolerances
涂附磨具 砂带 尺寸和公差 Coated abrasives--Abrasive belts--Dimensions and tolerances
涂附磨具 砂盘 尺寸和公差 Coated abrasives--Abrasive discs--Dimensions and tolerances
陶瓷可转位刀片 无孔刀片尺寸(G级) Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts without fixing hole(Class G)
陶瓷可转位刀片 带孔刀片尺寸 Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts with cylindrical fixing hole
陶瓷可转位刀片 无孔刀片尺寸(U级) Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts without fixing hole(Class U)
陶瓷可转位刀片 技术条件 Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Specifications
可转位钻头用削平型直柄 Drills with indexable inserts--Cylindrical shanks with a parallel flat
制造业自动化 术语 Terminology of automation for manufacturing
金属切削机床 型号编制方法 Metal-cutting machine tools--Method of type designation
钢丝镀锌层 Zinc coatings for steel wire
塑料注射模大型模架 限位块 Injection mould for plastic large-size mould bases?Stop plates
电阻焊机的安全要求 Safety requirements for resistance welding machine
弧焊设备安全要求 第1部分:焊接电源 Safety requirements for arc welding equipment--Part 1: Welding power sources
弧焊设备安全要求 第11部分: 电焊钳 Safety requirements for are welding equipment Part 11: Electrode holders
弧焊设备安全要求 第12部分: 焊接电缆耦合装置 Safety requirements for arc welding equipment Part 12: Coupling devices for welding cables
真空金属镀层厚度测试方法 电阻法 Test method for vacuum-deposited metal thickness--Electric resistance method
扭力扳手通用技术条件 Torque wrench--General requirements
电讯夹扭钳和剪切钳通用技术条件 Pliers and nippers for electronics--General technical requirements
金属热处理生产过程安全卫生要求 Requirements for the safety and health in production process of metal heat treatment
正面角焊缝接头拉伸试验方法 Method of tension test for front fillet welded joint
金属切削机床安全防护通用技术条件 Metal-cutting machine tools--General safeguarding specification
金属覆盖层 延展性测量方法 Metallic coatings--Methods of measurement of ductility
锤上钢质自由锻件机械加工余量与公差一般要求 Machining allowances and tolerances for steel open die forgings on hammer--General reguirement
锤上钢质自由锻件机械加工余量与公差盘、柱类 Machining allowances and tolerances for steel open die forgings on hammer--Disks and columns
锤上钢质自由锻件机械加工余量与公差 带孔圆盘类 Machining allowances and tolerances for steel open die forgings on hammer--Disk swith holes
锤上钢质自由锻件机械加工余量与公差 圆环类 Machining allowances and tolerances for steel open die forgings on hammer--Rings
锤上钢质自由锻件机械加工余量与公差 套筒类 Machining allowances and tolerances for steel open die forgings on hammer--Seamles cylinder hushings
锤上钢质自由锻件机械加工余量与公差 光轴类 Machining allowances and tolerances for steel open die forgings on hammer--Shaft without steps
锤上钢质自由锻件机械加工余量与公差 台阶轴类 Machining allowances and tolerances for steel open die forgings on hammer--Shaft with steps
锤上钢质自由锻件机械加工余量与公差 单拐曲轴类 Machining allowances and tolerances for steel open dle forgings on hammer--Single throw crankshaft
锤上钢质自由锻件机械加工余量与公差 黑皮锻件 Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining
离子镀 仿金氮化钛的颜色 Ion plating--Colour of golden TiN
软钎焊用钎剂 分类、标记与包装 Soldering fluxes--Classification, labelling and packaging
软钎焊用钎剂 树脂类钎剂 Soldering fluxes--Resin basis fluxes
软钎焊用钎剂 无机物类钎剂 Soldering fluxes--Inorganic fluxes
软钎焊用钎剂 有机物类钎剂 Soldering fluxes--Organic fluxes
钢制管道对接环焊缝超声波探伤方法和检验结果的分级 Methods of ultrasonic inspection and result classification of circumferential butt welds in steel pipes and tubes
可程控测量设备的标准数字接口 Standard digital interface for programmable instrumentation
电讯夹扭钳和剪切钳术语 Pliers and nippers for electronics--Nomenclature
锯床 安全防护技术要求 Sawing machines--Safeguarding specification
硬质合金螺旋齿立铣刀 第1部分:直柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 1: Dimensions of end mills with parallel shank
硬质合金螺旋齿立铣刀 第2部分: 7: 24锥柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 2: Dimensions of end mills with 7:24 taper shank
硬质合金螺旋齿立铣刀 第3部分: 莫氏锥柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 3: Dimensions of end mills with morse taper shank
硬质合金螺旋齿立铣刀 第4部分: 技术条件 End mills with brazed helical hardmetal tips--Part 4: Technical specifications
超硬磨料制品 切割石材和建筑物用锯片 钢基体尺寸 Abrasive products--Segmented saws for machining of stone and masonry cutting--Dimensions of steel blades
磨料磨具术语 第1部分: 磨料术语 Terminologry for abrasives and abrasive products--Part 1: Terminology for abrasives
磨料磨具术语 第2部分: 磨具术语 Terminologry for abrasives and abrasive products--Part 2: Terminology for abrasives products
面铣刀寿命试验 Tool life testing in face milling
立铣刀寿命试验 Tool life testing in end milling
单刃车削刀具寿命试验 Tool-life testing with single-point turning tools
数控卧式车床 精度检验 Numerically controlled turning machines--Testing of the accuracy
工业窑炉用测温锥 Pyrometric reference cones for kilns use
计算机集成制造系统体系结构 Computer integrated manufacturing system architecture
工业自动化系统 集成制造系统安全的基本要求 Industrial automation systems--Safety of integrated manufacturing systems--Basic requirements
工业自动化系统和集成 产品数据表达与交换 第1部分: 概述与基本原理 Industrial automation systems and integration--Product data representation and exchange--Part 1: Overview and fundamental principles
工业自动化系统与集成 产品数据的表达与交换 第21部分: 实现方法: 交换文件结构的纯正文编码 Industrial automation systems and integration--Product data representation and exchange--Part 21: Implementation method:Clear text encoding of the exchange structure
工业自动化系统与集成 产品数据的表达与交换 第31部分: 一致性测试方法论与框架: 基本概念 Industrial automation systems and integration--Product data representation and exchange--Part 31: Conformance testing methodology and framework: General concepts
工业自动化系统与集成 产品数据的表达与交换 第32部分:一致性测试方法论与框架:对测试实验室和客户的要求 Industrial automation systems and integration--Product data representation and exchange--Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients
工业自动化系统与集成 产品数据表达和交换 第41部分: 集成通用资源: 产品描述与支持原理 Industrial automation systems and integration--Product data representation and exchange--Part 41: Integrated generic resources: Fundamentals of product description and support
工业自动化系统和集成 产品数据表达与交换 第42部分; 集成通用资源: 几何与拓扑表达 Industrial automation systems and integration--Product data representation and exchange--Part 42: Integrated generic resources: Geometric and topological representation
工业自动化系统与集成 产品数据表达和交换 第43部分: 集成通用资源: 表达结构 Industrial automation systems and integration--Product data representation and exchange--Part 43: Integrated generic resources: Representation structures
工业自动化系统与集成 产品数据表达和交换 第44部分: 集成通用资源: 产品结构配置 Industrial automation systems and integration--Product data representation and exchange--Part 44: Integrated generic resources: Product structure configuration
工业自动化系统与集成产品数据表达与交换 第45部分: 集成通用资源: 材料 Industrial automation systems and integration Product data representation and exchange Part 45: Integrated generic resource: Materials
工业自动化系统和集成 产品数据表达与交换 第46部分 集成通用资源: 可视化显示 Industrial automation systems and integration--Product data representation and exchange--Part 46: Integrated generic resources: Visual presentation
工业自动化系统与集成产品数据表达与交换 第47部分: 集成资源: 形状变化公差 Industrial automation systems and integration--Product data representation and exchange--Part 47: Intergrated resources: Shape variation tolerances
工业自动化系统与集成 产品数据表达与交换 第101部分: 集成应用资源: 绘图 Industrial automation systems and integration--Product data representation and exchange--Part 101: Integrated application resources: draughting
工业自动化系统与集成 产品数据表达与交换 第105部分: 集成应用资源: 运动学 Industrial automation systems and integration--Product data representation and exchange--Part 105:Integrated application resource:Kinematics
工业自动化系统与集成 产品数据表达与交换 第201部分 应用协议: 显式绘图 Industrial automation systems and integration--Product data representation and exchange Part 201: Application protocol: Explicit draughting
工业自动化系统与集成产品数据的表达与交换 第202部分: 应用协议: 相关绘图 Industrial automation systems and integration--Product data representation and exchange--Part 202: Application protocol: Associative draughting
工业自动化系统与集成 产品数据的表达与交换 第203部分: 应用协议: 配置控制设计 Industrial automation systems and integration--Product data representation and exchange--Part 203: Application protocol: Configuration controlled design
工业控制系统用现场总线 第2部分:物理层规范和服务定义 Fieldbus standard for use in industrial control system--Part 2: Physical layer specification and service definition
焊缝 工作位置 倾角和转角的定义 Welds--Working positions--Definitions of angles of slope and rotation
工业自动化系统 制造报文规范 第一部分:服务定义 Industrial automation systems--Manufacturing message specification--Part 1: Service definition
工业自动化系统 制造报文规范 第2部分:协议规范 Industrial automation systems--Manufacturing message specification--Part 2: Protocol specification
工业自动化系统 制造报文规范 第三部分:机器人伴同标准 Industrial automation systems--Manufacturing message specification--Part 3: Companion standard for robotics
工业自动化系统 制造报文规范 第4部分: 数值控制用伴同标准 Industrial automation systems--Manufacturing message specification--Part 4: Companion standard for numerical control
工业自动化系统 制造报文规范 协议子集规范 Industrial automation systems--Specification of subsets of the protocol for the manufacturing--Message specification
冲裁间隙 Blanking clearance
热喷涂 自熔合金涂层 Thermal spraying--Self-fluxing alloy coatings
金属覆盖层产品钎焊性的标准试验方法 Standard test method for solderability of metallic-coated products
金属切削机床 振动测量方法 Metal-cutting machine tools--Measurement method for vibration
金属切削机床 噪声声压级测量方法 Metal-cutting machine tools--Measurement method of sound pressure level
整体硬质合金直柄立铣刀 第1部分: 型式与尺寸 Solid hardmetal end mills with parallel shank Part 1: Dimensions
整体硬质合金直柄立铣刀 第2部分:技术规范 Solid hardmetal end mills with parallel shank Part 2: Technical specifications
金属覆盖层 厚度测量 X射线光谱方法 Measurement of metallic coating thickness-X--ray spectrometric methods
钢件的正火与退火 Normalizing and annealing of steel parts
钢件的淬火与回火 Quenching and tempering of steel parts
复合钢板焊接接头力学性能试验方法 Mechanical tests on welded joints in clad plates
工业机器人 坐标系和运动命名原则 Industrial robots--Coordinate systems and motion nomenclature
工业自动化 词汇 Industrial automation glossary
工业自动化系统 制造报文规范 第1部分: 服务定义 补充件1: 数据交换 Industrial automation systems--Manufacturing message specification--Part 1: Service definition AMENDMENT 1: Data exchange
工业自动化系统 制造报文规范(MMS) 第2部分: 协议规范 补充件1: 数据交换 Industrial automation systems--Manufacturing message specification--Part 2: Protocol specification AMENDMEN 1: Data exchange
工业自动化 车间生产 第1部分: 标准化参考模型和确定需求的方法论 Industrial automation--Shop floor production--Part 1: Reference model for standardization and a methodology for identification of requirements
工业自动化 车间生产 第2部分: 标准化参考模型和方法论的应用 Industrial automation--Shop floor production--Part 2: Application of the reference model for standardization and methodology
切削刀具--高速钢分组代号 Cutting tools--Designation of high-speed steel groups
定心钻 Spot drills
锻压机械 安全技术条件 Metalforming machinery--Safety requirements
机床 控制装置的操作方向 Machine tools--Direction of operation of controls
机床 速度和进给量 Machine tools--Speeds and feeds
模糊控制装置和系统 第1部分: 基本术语 Fuzzy control devices and systems--Part 1: Fundamental terminology
模糊控制装置和系统 第2部分: 模糊控制单元性能检测一般要求 Fuzzy control devices and systems-Part 2: General requirements for evaluating performance of fuzzy control unit
模糊控制装置和系统 第3部分: 可编程控制器 模糊控制编程 Fuzzy control devices and systems Part 3: Programmable controllers-fuzzy control programming
模糊控制装置和系统 第4部分: 洗衣机模糊控制基本性能检测要求 Fuzzy control devices and systems-Part 4: Evaluation requirements of basic properties of fuzzy control for washing machine
工业炉名词术语 Industrial furnace terminology
工业过程测量和控制 术语和定义 Industrial-process measurement and control--Terms and definitions
工业过程测量和控制装置工作条件 第1部分: 气候条件 Industrial-process measurement and control equipment--Operating conditions Part 1: Climatic conditions
工业过程测量和控制装置的工作条件 第3部分: 机械影响 Operating conditions for industrial-process measurement and control equipment Part 3: Mechanical influences
有机热载体炉 Organic heat transfer material heaters
机床检验通则 第1部分: 在无负荷或精加工条件下机床的几何精度 Test code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
机床检验通则 第2部分: 数控轴线的定位精度和重复定位精度的确定 Test code for machine tools--Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
化学转化膜 铝及铝合金上漂洗和不漂洗铬酸盐转化膜 Chemical conversion coatings Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
金属覆盖层 锡--铅合金电镀层 Metallic coatings--Electroplated coatings of tin-lead alloys
金属覆盖层 锡--镍合金电镀层 Metallic coatings--Electroplated coatings of tin-nickel alloys
低合金钢药芯焊丝 Low alloy steel flux cored electrodes for arc welding
滚珠丝杠副 第1部分: 术语和符号 Ball screws--Part 1: Vocabulary and designation
滚珠丝杠副 第2部分: 公称直径和公称导程 公制系列 Ball screws--Part 2: Nominal diameters and nominal leads--Metric series
滚珠丝杠副 第3部分: 验收条件和验收检验 Ball screws--Part 3: Acceptance conditions and acceptance tests
工业自动化系统与集成 零件库 第1部分: 综述与基本原理 Industrial automation systems and integration Parts library Part 1: Overview and fundamental principles
金属覆盖层 孔隙率试验评述 Metallic coatings--Review of porosity tests
金属覆盖层 孔隙率试验 铁试剂试验 Metallic coatings--Porosity tests--Ferroxyl test
不锈钢药芯焊丝 Stainless steel flux cored wires
埋弧焊用不锈钢焊丝和焊剂 Stainless steel electrodes and fluxs for submerged arc welding
工业机器人 末端执行器自动更换系统 词汇和特性表示 Industrial robots--Automatic end effector exchange systems--Vocabulary and presentation of characteristics
手持式市电供电圆锯性能测量方法 Hand-held electric mains voltage operated circular saws-Methods for measuring the performance
手持式市电供电喷枪的性能要求 Hand-held electric mains voltage operated spray guns-Performance requirements
带断屑槽可转位刀片近似切屑控制区的分类和代号 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
麻花钻 技术条件 Twist drills--Technical specifications
硬质合金车刀 第1部分: 代号及标志 Turning tools with carbide tips Part 1: Designation and marking
硬质合金车刀 第2部分: 外表面车刀 Turning tools with carbide tips Part 2: External tools
硬质合金车刀 第3部分: 内表面车刀 Turning tools with carbide tips Part 3: Internal tools
钢件的气体渗氮 Gas nitriding of steel parts
水性涂料涂装体系选择通则 General rules of the selection for painting system of water paint
金属覆盖层 孔隙率试验 潮湿硫(硫华)试验 Metallic coatings--Porosity tests--Humid sulfur(flowers of sulfur) test
高速公路交通工程钢构件防腐技术条件 Specification for steel component anticorrosion of highway traffic engineering appurtenances
过程测量和控制装置--通用性能评定方法和程序 第1部分: 总则 Process measurement and control devices--General methods and procedures for evaluating performance--Part 1: General considerations
过程测量和控制装置--通用性能评定方法和程序 第2部分: 参比条件下的试验 Process measurement and control devices--General methods and procedures for evaluating performance--Part 2: Tests under reference conditions
过程测量和控制装置--通用性能评定方法和程序 第3部分: 影响量影响的试验 Process measurement and control devices--General methods and procedures for evaluating performance--Part 3: Tests for the effects of influence quantities
过程测量和控制装置--通用性能评定方法和程序 第4部分: 评定报告的内容 Process measurement and control devices--General methods and procedures for evaluating performance--Part 4: Evaluation report content
工业过程测量和控制--系统评估中系统特性的评定 第1部分: 总则和方法学 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 1: General consideration and methodology
工业过程测量和控制--系统评估中系统特性的评定 第2部分: 评估方法学 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 2: Assessment methodology
工业过程测量和控制--系统评估中系统特性的评定 第3部分: 系统功能性评估 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 3: Assessment of system functionality
工业过程测量和控制--系统评估中系统特性的评定 第5部分: 系统可信性评估 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 5: Assessment of system dependability
加工中心 检验条件 第6部分:进给率、速度和插补精度检验 Test conditions for machining centres--Part 6: Accuracy of feeds, speeds and interpolations
加工中心 检验条件 第8部分:三个坐标平面上轮廓特性的评定 Test conditions for machining centres--Part 8: Evaluation of the contouring performance in the three coordinate planes
电阻焊 与焊钳一体式的变压器 Electric resistance welding--Integrated transformers for welding guns
工业加热用电红外辐射器的特性 第1部分: 短波电红外辐射器 Characteristics of electric infra-red emitters for industrial heating Part 1: Short wave infra-red emitters
加工中心 安全防护技术条件 Machining centres--Safeguarding specification
涂覆涂料前钢材表面处理 表面清洁度的评定试验 清理过的表面上氯化物的实验室测定 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Laboratory determination of chloride on cleaned surfaces
涂覆涂料前钢材表面处理 表面清洁度的评定试验 涂覆涂料前凝露可能性的评定导则 Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application
焊接 预热温度、道间温度及预热维持温度的测量指南 Welding--Guidance on the measurement of preheating temperature,interpass temperature and preheat maintenance temperature
金属覆盖层 钢铁制品热浸镀铝 技术条件 Metallic coating--Hot dipped aluminum coatings on ferrous articles--Specification
熔融结合环氧粉末涂料的防腐蚀涂装 Anti-corrosive painting of fusion bonded epoxy coating powders
内燃机产品名称和型号编制规则 Internal combustion engines - Nomenclature and code of designations
往复式内燃机 旋转方向、气缸和气缸盖上气门的标志及直列式内燃机右机、左机和发动机方位的定义 Reciprocating internal combustion engines--Designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right-hand and left-hand in line engines and locations on an engine
涡轮增压器产品命名和型号编制方法 Denomination for turbochargers and code of identification symbols
汽轮机 参数系列 Specification for steam turbines
汽油发动机化油器出口凸缘尺寸 Carbureters for automobile engines--Dimensions of outlet flanges
弧形闸门通用技术条件 General technical requirements for radial gates
工业余热术语、分类、等级及余热资源量计算方法 Terms,classfication,grade of waste heat in industry and calculating method of quantity of waste heat resources
内燃机台架性能试验方法 标准环境状况及功率、燃油消耗和机油消耗的标定 Performance test methods for reciprocating internal combustion engine--Standard ambient conditions and declarations of power, fuel consumption and lubricating oil consumption
内燃机台架性能试验方法 试验方法 Performance test methods for reciprocating internal combustion engine--Test methods
内燃机台架性能试验方法 测量技术 Performance test methods for reciprocating internal combustion engine--Measurement techniques
内燃机通用技术条件 Reciprocating internal combustion engines--General technical specifications
内燃机铝活塞技术条件 Aluminium piston--Reciprocating internal combustion engines--Technical specifications
内燃机活塞环 通用规则 Internal combustion engines--Piston rings--General specifications
内燃机活塞环 术语 Internal combustion engines--Piston rings--Vocabulary
内燃机活塞环 刮环 Internal combustion engines-Piston rings-Scraper rings
内燃机活塞环 技术要求 Internal combustion engines--Piston rings--Quality requirements
内燃机活塞环 油环 Internal combustion engines-Piston rings-Oil control rings
内燃机活塞环 检验方法 Internal combustion engines--Piston rings--Inspection measuring principles
内燃机活塞环 螺旋撑簧油环 Internal combustion engines--Piston rings--Coil-spring-loaded oil control rings
内燃机湿式铸铁气缸套技术条件 Internal combustion engines--Cast iron wet type cylinder liners--Specification
内燃机主轴瓦及连杆轴瓦技术条件 Internal combustion engines--Main and connecting rod bearings--Specification
往复活塞式内燃机 术语 Reciprocating internal combustion engines - Terminology
太阳电池型号命名方法 Designation method of solar cells(photovoltaic device)
太阳光伏能源系统术语 Terminology for solar photovoltaic energy system
热设备能量平衡通则 Energy equilibrium of heating devices--Common rules
设备热效率计算通则 The general principles for calculation of thermal efficiency of equipment
综合能耗计算通则 General principles for calculation of total production energy consumption
内燃机气门弹簧技术条件 Internal combustion engine--Technical requirements for valve springs
移动电站通用技术条件 Mobile electric power plant,general specification for
电工术语 风力发电机组 Electrotechnical terminology Wind turbine generator systems
柴油机用喷油泵、调速器、喷油器弹簧技术条件 Technical specifications of springs for fuel pump, governor and injecter of diesel engines
热水锅炉 参数系列 Specifications series of hot water boiler
企业能量平衡通则 The general principles for energy balance of industrial enterprise
评价企业合理用电技术导则 Technical quides for evaluating the rationality of electricity usage in industrial enterprise
评价企业合理用热技术导则 Technical guides for evaluating the rationality of heat usage in industrial enterprise
企业能量平衡技术考核验收标准 Standard for assesment of technical proficiency and acceptance for energy balance of industrial enterprise
中小功率内燃机清洁度测定方法 Determination of cleanliness for small and medium power internal combustion engines
密封放射源分级 Sealed radioactive sources classification
密封放射源一般规定 Sealed radioactive sources general
闪烁体尺寸 Dimensions of scintillators
用于电离辐射探测器的放大器和电荷灵敏前置放大器的测试方法 Test procedures for amplifiers and charge-sensitive preamplifiers used with detectors of ionizing radiation
核反应堆保护系统安全准则 General safety principles of nuclear reactor protection system
平板型太阳集热器热性能试验方法 Test methods for the thermal performance of flat plate solar collectors
设备及管道保温技术通则 General principles for thermal insulation technique of equipments and pipes
往复式内燃机 防火 Reciprocating internal combustion engines--Fire protection
往复式内燃机手操纵机构动作方向 Reciprocating internal combustion engines--Hand operated control devices--Standard direction of motion
农村家用水压式沼气池标准图集 The collection of designs for household hydraulic biogas digesters in rural areas
农村家用水压式沼气池质量检查验收标准 The standard for check acceptance of the quality for household hydraulic biogas digesters in rural areas
农村家用水压沼气池施工操作规程 The operation rules for construction of household hydraulic biogas digesters in rural aeras
内燃机排气消声器测量方法 Measurement procedure for exhaust silencers of internal combustion engines
声学 消声器测量方法 Acoustics--Measurement procedure for silencers
供热式汽轮机参数系列 Parameters of steam turbines in conventional combined heating and power stations
多道脉冲幅度分析器 主要性能、技术要求和测试方法 Multichannel pulse height analyzers Main characteristics, technical requirements and test methods
核科学技术术语 核物理与核化学 Glossary of terms:nuclear science and technology--Nuclear physics and nuclear chemistry
核科学技术术语 裂变反应堆 Glossary of terms:nuclear science and technology--Fission reactor
核科学技术术语 核燃料与核燃料循环 Glossary of terms:nuclear science and technology--Nuclear fuel and Nuclear fuel cycle
核科学技术术语 放射性核素 Glossary of terms--Nuclear science and technology radionuclide
核科学技术术语 辐射防护与辐射源安全 Glossary of terms--Nuclear science and technology Radiation protection and safety of radiation sources
核科学技术术语 核仪器仪表 Glossary of terms:nuclear science and technology Nuclear instrumentation
核科学技术术语 核材料管制 Glossary of terms:nuclear science and technology nuclear material control
核科学技术术语 放射性废物管理 Glossary of term--Nuclear science and technology Radioactive waste management
核反应堆安全逻辑装置特性和检验方法 Safety logic assemblies of nuclear reactor Characteri-stics and test methods
核电厂安全系统定期试验与监测 Periodic tests and monitoring of the safety system of nuclear power plant
柴油机喷油泵柱塞偶件技术条件 Technical specification of fuel injection pump plunger and barrel assembly for diesel engines
固定式发电用汽轮机技术条件 Specification for stationary steam turbines driving generator
产品电耗定额制定和管理导则 Guides for the stipulation and administration of electricity consumption norm of product
柴油机柱塞式喷油泵总成 技术条件 Technical requirements for jerk fuel injection pump
柴油机喷油泵出油阀偶件技术条件 Technical specification for delivery valves of fuel injection pumps of diesel engines
柴油机喷油嘴偶件技术条件 Technical specification for fuel injection nozzles of diesel engines
反应堆保护系统的隔离准则 Separation criteria for reactor protection system
往复式内燃机 性能 第1部分: 标准基准状况, 功率、燃料消耗和机油消耗的标定及试验方法 Reciprocating internal combustion engines--Performance--Part 1: Standard reference conditions,declarations of power,fuel and lubricating oil consumptions,and test methods
往复式内燃机 性能 第4部分: 调速 Reciprocating internal combustion engines--Performance--Part 4: Speed governing
往复式内燃机 性能 第6部分: 超速保护 Reciprocating internal combustion engines--Performance--Part 6: Overspeed protection
往复式内燃机 性能 第7部分: 发动机功率代号 Reciprocating internal combustion engines--Performance--Part 7: Codes for engine power
核电厂环境辐射防护规定 Regulations for environmental rediation protection of nuclear power plant
企业能流图绘制方法 Methods for drawing energy flow diagram of industrial enterprise
企业能耗计量与测试导则 Directives for measuring and testing energy consumption in industrial enterprises
热电联产系统技术条件 General requirements of heat and power cogenerating systems
平板型太阳集热器技术条件 Specification for flat plate solar collectors
热分析术语 Nomenclature for thermal analysis
航天用标准太阳电池 Astronautic standard solar cell
航天用太阳电池电性能测试方法 Measurement procedures for electrical characteristics of astronautic solar cells
航天用太阳电池标定的一般规定 The general rules of astronautic solar cell calibration
地面用太阳电池标定的一般规定 The general rules of terrestrial solar cell calibration
往复式内燃机 内燃机零部件名词和定义 第一部分 固定件及外部罩盖 Reciprocating internal combustion engines--Terms and definitions of e, ngine components--Part 1: Struture and external covers
往复式内燃机零部件术语和定义 气门组件、凸轮轴传动和气门驱动机构 Reciprocating internal combustion engines-vocabulary of components and systems--Valves, camshaft drive and actuating mechanisms
往复式内燃机零部件术语 主要运动件 Reciprocating internal combustion engines - Terminology of components main running gear
往复式内燃机零部件术语 增压及进排气管系统 Reciprocating internal combustion engines - Terminology of components pressure-charging and air/exhaust gas ducting systems
往复式内燃机零部件和系统术语 第5部分: 冷却系统 Reciprocating internal combustion engines--Vocabulary of components and systems--Part 5: Cooling systems
往复式内燃机零部件和系统术语 第6部分: 润滑系统 Reciprocating internal combustion engines--Vocabulary of components and systems--Part 6: Lubricating systems
往复式内燃机 零部件和系统术语 第8部分: 起动系统 Reciprocating internal combustion engines--Vocabulary of components and systems--Part 8: Starting systems
核电厂安全系统的可靠性分析要求 Requirements of reliability analysis for nuclear power plant safety systems
高活度钴-60密封放射源 High activity cobalt-60 sealed radioactive sources
制冷剂编号方法和安全性分类 Number designation and safety classification of refrigerants
1:500, 1:1000, 1:2000地形图图式 Specifications for cartographic symbols 1:500, 1:1000, 1:2000 topographic maps
1:500、1:1000、1:2000 地形图 航空摄影测量内业规范 Specifications for aerophotogrammetric office operation 1:500, 1:1000, 1:2000 topographic maps
1:500、1:1000、1:2000 地形图 航空摄影测量外业规范 Specifications for aerophotogramme tricfield work 1:500, 1:1000, 1:2000 topographic maps
制冷装置试验 Testing of refrigerating systems
风力发电机组型式与基本参数 Wind-generating sets--Type and basic parameters
电站汽轮机热力性能验收试验规程 Rules for power plant steam turbine thermal acceptance tests
设备及管道保温效果的测试与评价 Methods of measuring and evaluating thermal insulation effects for equipments and pipes
设备及管道保温设计导则 Guide for design of thermal insulation of equipments and pipes
企业设备电能平衡通则 The general principles for electrocity balance of equipment of industrial enterprise
柴油机全流式滑油滤器试验方法 压力降/ 流量特性 Methods of test for full-flow lubricating oil filters for diesel engines--Pressure drop/flow characteristics
柴油机全流式滑油滤器试验方法 滤芯制造完善性的测定 Methods of test for full-flow lubricating oil filters for diesel engines--Fabrication integrity of filter elements
柴油机全流式滑油滤器试验方法 耐高压降及高温性能 Methods of test for full-flow lubricating oil filters for diesel engines--Resistance to high pressure drop and to elevated temperature
柴油机全流式滑油滤器试验方法 滤芯旁通元件特性 Methods of test for full-flow lubricating oil filters for diesel engines--Element by-pass component characteristics
柴油机全流式滑油滤器试验方法 滤芯端向负荷 Methods of test for full-flow lubricating oil filters for diesel engines--End load of filter elements
水轮发电机组安装技术规范 Specification for installation of hydraulic-turbine and generator units
辐射防护仪器的校准与定度X, γ照射量率仪 Calibration for radiation protection instruments X and γ exposure rate meters
核反应堆中子注量率测量堆芯仪表 In-core instrumentation for neutron fluence rate measurements in nuclear reactors
核电子仪器用样品盘尺寸 Dimensions of sample planchets used in nuclear electronic instruments
α,β表面污染测量仪与监测仪的校准 Calibration for alpha, beta surface contamination meters and monitors
环境热释光剂量计及其使用方法 Environmental thermoluminescence dosimeter and its usage
电离辐射监测质量保证一般规定 General rule of quality assurance for ionizing radiation monitoring
水管锅炉受压元件强度计算 Strength calculation of pressure parts for watertube boilers
直流周期计 D.C.Periodmeters
核电厂安全系统可靠性分析一般原则 General principles of reliability analysis for nuclear power plant safety systems
标准放射源的检验证书 Certification of standardized radioactive sources
放射性物质包装的内容物和辐射的泄漏检验 Radioactive materials--Packagings-Tests for contents leakage and radiation leakage
直读式验电器型辐射剂量仪 充电器 Direct-reading electroscope-type radiation dosimetric meters--Part 2: Chargers
制冷和供热用机械制冷系统安全要求 Mechanical refrigerating systems used for cooling and heating-Safety requirements
径流式涡轮增压器连接尺寸 Radial turbocharger--Connection dimensions
地面用晶体硅光伏组件 设计鉴定和定型 Crystalline silicon terrestrial photovoltaic(PV) modules-design qualification and type approval
水轮机调速器与油压装置技术条件 Specifications of governors and pressure oil supply units for hydraulic turbines
水轮机调速器与油压装置试验验收规程 Test acceptance codes of governors and pressure oil supply units for hydro-turbines
电站锅炉性能试验规程 Performance test code for utility boiler
热处理合理用电导则 Guides for the rationality of electricity usage in heat treatment
核仪器用高、低压直流稳压电源测试方法 Test procedures for stabilized d.c high/low voltage power for nuclear instruments
核级可烧结二氧化铀粉末技术条件 Specification for nuclear-grade sinterable uranium dioxide powder
烧结二氧化铀芯块技术条件 Specification for sintered uranium dioxide pellets
铀矿石浓缩物 Uranium ore concentrate
六氟化铀中铀的重量法测定 Determination of uranium in uranium hexafluoride by gravimetric method
中小功率柴油机 振动评级 Evaluation of vibration for small and medium power diesel engines
小型汽油机 振动测试方法 Measuring method of vibration for small gasoline engine
小型汽油机 振动评级 Evaluation of vibration for small gasoline engine
微波和被动红外复合入侵探测器 Combination microwave and passive infrared intrusion detector
轻型燃汽轮机通用技术要求 General requirements for light weight gas turbines
轻型燃汽轮机验收试验规范 Light weight gas turbines acceptance test specification
轻型燃汽轮机成套设备噪声值及测量方法 Noise criteria and sound measurement procedures of light weight gas turbine turnkey installations
锅炉用水和冷却水分析方法 锌离子的测定 锌试剂分光光度法 Analytical methods for boiler water and cooling water - Determination of zinc ion - Zincon spectrophotometry
锅炉用水和冷却水分析方法 磷锌预膜液中锌的测定 络合滴定法 Analytical methods for boiler water and cooling water - Determination of zinc in prefilming liquid containing phosphorus and zinc - Complexometric titration
锅炉用水和冷却水分析方法 磷锌预膜液中铁的测定 磺基水杨酸分光光度法 Analytical methods for boider water and cooling water - Determination of iron in prefilming liquid containing phosphorus and zinc - Sulphosalicylic acid spectrophotometry
燃煤生活锅炉热效率 Boilers using coal for daily life-thermal efficiency
柴油机燃油系列 术语 Fuel system for diesel engine - Terminology
烟道式余热锅炉热工试验方法 Thermal test method for gas pass waste heat boiler
锅炉受压元件焊接接头金相和断口检验方法 Boiler pressure parts - Metallographic examination and fracture test of weld joints
电站减温减压阀技术条件 Specification of the steam converting valve for fossil power stations
电站调节阀技术条件 Specification of control valves for fossil power stations
容积式和离心式冷水(热泵)机组性能试验方法 The methods of performance test for positive displacement and centrifugal water-chilling units and heat pump
水轮机通流部件技术条件 Specifications for water passage components of hydraulic turbines
太阳电池光谱响应测试方法 Measuring methods of spectral response for solar cells
光谱标准太阳电池 Spectrum standard solar cell
非晶硅太阳电池电性能测试的一般规定 General rules for measurements of electrical characteristics of amorphous silicon solar cells
锻造生产能源消耗标准 Energy consumption standard in forging production
核辐射环境质量评价一般规定 The general regulation for environmental radiological assessment
核设施流出物和环境放射性监测质量保证计划的一般要求 General requirements of quality assurance program for effluent and environmental radioactivity monitoring at nuclear facilities
核设施流出物监测的一般规定 The regulations for monitoring effluents at nuclear facilities
水中镭的α放射性核素的测定 The determination for alpha-radionuelide of radium in water
轻型燃气轮机排气冒烟测量 Light weight gas turbines exhaust smokes measurement
轻型燃气轮机气态污染物测量 Gas emissions measurement of light weight gas turbines
轻型燃气轮机使用与维护 Light weight gas turbine operation and maintenance
堆用核仪器电磁干扰特性和检验方法 Characteristics and test methods of electromagnetic interferences in nucleonic instrumentations for reactors
设备及管道保冷技术通则 General principles for low-temperature insulation technique of equipments and pipes
水轮发电机组自动化元件(装置)及其系统基本技术条件 Basic specifications of automatic control components(devices) and their related system for hydroturbine-generating sets
压水堆核燃料棒焊缝金相检验 Metallographic examination for weld seam of nuclear fuel rod used in PWR
医用铟-113m 放射性核素发生器 Medical indium-113m radionuclide generator
压水堆燃料棒氦质谱检漏 Helium leak testing of nuclear fuel rod for PWR
二氧化铀芯块水蒸气腐蚀试验方法 Steam corrosion testing of uranium dioxide pellets
二氧化铀芯块中硼的测定 姜黄素萃取光度法 Determination of boron in uranium dioxide pellets?The curcumin extraction--Spectrophotometric method
二氧化铀芯块水分含量测定方法 Determination of moisture in uranium dioxide pellets
二氧化铀粉末和芯块中铀的测定 硫酸亚铁还原--重铬酸钾氧化滴定法 Uranium dioxide powder and pellets - Determination of uranium--Ferrous sulfate reduction-potassium dichromate oxidation titrimatric method
二氧化铀粉末和芯块的氧铀原子比测定 热重法 Determination of oxygen to uranium atomic ratic in uranium dioxide powder and pellets by thermogravimetric method
二氧化铀粉末和芯块中氮的测定 分光光度法 Uranium dioxide powder and pellets - Determination of nitrogen--Spectrophotometric method
二氧化铀粉末和芯块中氟的测定 高温水解- 离子选择性电极法 Uranium dioxide powder and pellets - Determination of fluorine-pyrohydrolysis ion--selective electrode method
二氧化铀粉末和芯块中钨的测定 分光光度法 Uranium dioxide powder and pellets - Determination of tungsten--Spectrophotometric method
二氧化铀粉末和芯块中硅的测定 分光光度法 Uranium dioxide powder and pellets--Determination of silicon - Spectrophotometric method
二氧化铀粉末比表面积测定 多点 BET法 Determination of specific surface area of uranium dioxide powder by multipoint BET method
铀矿石浓缩物中铀的测定 硫酸亚铁还原--重铬酸钾滴定法 Determination of uranium in uranium ore concentrate by ferrous sulfate reduction--Potassium dichromate titrimatric
铀矿石浓缩物中硝酸不溶铀的测定 Determination of nitric acid-insoluble uranium in uranium ore concentrate
铀矿石浓缩物中可萃有机物的测定 Determination of extractable organic material in uranium ore concentrate
铀矿石浓缩物中砷的测定 二乙基二硫代氨基甲酸盐光度法 Determination of arsenic in uranium ore concentrate by diethyldithiocarbamate photometric method
铀矿石浓缩物中碳酸根的测定 非水滴定法 Determination of carbonate in uranium ore concentrate by titration in non-aqueous solvent
铀矿石浓缩物中氟的测定 离子选择性电极法 Determination of fluoride in uranium ore concentrate by ion-selective electrode
铀矿石浓缩物中卤素的测定 伏尔哈德法 Determination of halidess in uranium ore concentrate - Volhard titration
铀矿石浓缩物中水分的测定 110℃下失重法 Determination of moisture in uranium ore concentrare - Loss of weight at 110℃
铀矿石浓缩物中硅的测定 重量法测定硅 Determination of silicon in uranium ore concentrate by gravimetry
铀矿石浓缩物中硫的测定 燃烧-碘量法 Determination of sulfur in uranium ore concentrate by combustion-iodometric titrimetry
铀矿石浓缩物中钍的测定 钍试剂光度法 Determination of thorium in uranium ore concentrate by thorin photometric method
铀矿石浓缩物中硼的测定 分光光度法 Determination of boron in uranium ore concentrate by spectrophotometry
铀矿石浓缩物中锆的测定 二甲酚橙分光光度法 Determination of zirconium in uranium ore concentrate by xylenol orange spectrophotometric method
铀矿石浓缩物中钾、钠的测定 原子吸收光谱法 Determination of potassium and sodium in uranium ore concentrate by atomic absorption spectrometry
铀矿石浓缩物中铁、钙、镁、钼、钛、钒的测定 原子吸收光谱法 Determination of iron, calcium, magnesium molybdenum titanium and vanadium in uranium ore concentrate by atomic absorption spectrometry
铀矿石浓缩物中磷的测定 分光光度法 Determination of phosphorus in uranium ore concentrate by spectrophotometry
反应堆退役辐射防护规定 Regulation for radiation protection of reactor decommissioning
压水堆燃料棒焊缝X射线照相检验方法 Radiographic inspection of welds for PWR fuel rods
压水堆核燃料棒设计导则 Guide to design of nuclear fuel rods for PWR
二氧化铀粉末和芯块中磷的测定 钼蓝分光光度法 Uranium dioxide powder and pellet - Determination of phosphorus - Molybdenum blue spectrophotometric method
二氧化铀芯块密度和开口孔隙度的测定 液体浸渍法 Uranium dioxide pellets - Determination of density and amount of open porosity - Penetration immersion method
锅炉制图 Boiler drawings
家用电冰箱电耗限定值及节能评价值 The maximum allowable values of the energy consumption and evaluating values of energy conservation for household refrigerators
房间空气调节器能源效率限定值及节能评价值 The limited values of energy efficiency and evaluating values of energy conservation for room air conditioners
火力发电机组及蒸汽动力设备水汽质量 Quality criterion of water and steam for generating unit and steam power equipment
锅炉用水和冷却水分析方法 氨的测定 苯酚法 Analysis of water used in boiler and cooling system - Determination of ammonia?Phenol method
锅炉用水和冷却水分析方法 纯水电导率的测定 Analysis of water used in boiler and cooling system?Determination of electrical conductivity of pure water
锅炉用水和冷却水分析方法 全硅的测定 低含量硅氢氟酸转化法 Analysis of water used in boiler and cooling system?Determination of total silicon?Photometric mothod by conversion with hydrofluoric acid for low silicon
锅炉用水和冷却水分析方法 硅的测定 钼蓝比色法 Analysis of water used in boiler and cooling system - Determination of silica--Molybdenum blue colorimetry
锅炉用水和冷却水分析方法 硅的测定 硅钼蓝光度法 Analysis of water used in boiler and cooling system?Determination of silica--Photometric method by silica-molybdenum blue
锅炉用水和冷却水分析方法 浊度的测定(福马肼浊度) Analysis of water used in boiler and cooling system?Determination of turbidity--Formazine turbidity
锅炉用水和冷却水分析方法 油的测定 红外光度法 Analysis of water used in boiler and cooling system?Determination of mineral oil?Infrared photometric method
锅炉用水和冷却水分析方法 油的测定 紫外分光光度法 Analysis of water used in boiler and cooling system?Determination of mineral oil?Ultraviolet spectrophotometry
锅炉用水和冷却水分析方法 全铝的测定 Analysis of water used in boiler and cooling system ?Determination of total aluminum
锅炉用水和冷却水分析方法 钠的测定 动态法 Analysis of water used in boiler and cooling system?Determination for sodium--Dynamic method
锅炉用水和冷却水分析方法 钠的测定 静态法 Analysis of water used in boiler and cooling system?Determination for sodium--Statie method
锅炉用水和冷却水分析方法 溶解氧的测定 内电解法 Analysis of water used in boiler and cooling system?Determination for dissolved oxygen?Internal electrolysis
用于防护电离辐射的50mm和100 mm厚墙的铅屏蔽构件 Lead shielding units for 50 and 100mm thick walls used for protection against ionizing radiation
电能质量 供电电压允许偏差 Quality of electric energy supply - Admissible deviation of supply voltage
电能质量 电压波动和闪变 Power quality voltage fluctuation and flicker
单晶硅太阳电池总规范 General specification of single silicon solar cells
核燃料组件标识号规则 Nuclear fuel assembly identification standard
镅铍中子源 Americium-Beryllium neutron sources
产品单位产量能源消耗定额编制通则 General principles of stipulation of energy consumption norm for unit product
核电厂事故及事故后辐射监测设备 第一部分: 一般要求 Radiation monitoring equipment for accident and postaccident conditions in nuclear power plants - Part 1:General requirements
核电厂事故及事故后辐射监测设备 第二部分: 气态排出流中放射性惰性气体连续监测设备的特殊要求 Radiation monitoring equipment for accident and postaccident conditions in nuclear power plants?Part 2: Specific requirements for equipment for continuously monitoring radioactive noble gases in gaseous effluents
核电厂事故及事故后辐射监测设备 第三部分: 高量程区域 r 剂量率监测设备 Radiation monitoring equipment for accident and postaccident conditions in nuclear power plant--Part 3: High range area gamma radiation dose rate monitoring equipment for accident and post accident conditions
核电厂事故及事故后辐射监测设备 第五部分:空气放射性监测设备 Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants-Part 5: Monitoring equipment for air radioactivity
核电厂安全系统 电气物项质量鉴定 Qualification of electrical items of the safety systems for nuclear power generating stations
核电厂安全级电力系统准则 Criteria for class 1E power systems for nuclear power plants
核反应堆仪表准则 第一部分: 一般原则 Criteria for nuclear reactor instrumentation - Part 1: General principles
核反应堆仪表准则 第二部分: 压水堆 Criteria for nuclear reactor instrumentation - Part 2: Pressurized water reactors
核反应堆仪表准则 第三部分: 高温气冷反应堆 Criteria for nuclear reactor instrumentation--Part 3: High temperature gas cooled reactor(HTGR)
核反应堆仪表准则 第四部分: 液态金属冷却快堆 Criteria for nuclear reactor instrumentation--Part 4: Liguid-metal cooled fast reactors
核电厂安全级电气设备和系统文件标识方法 Method for identification of documents related to safety class 1E equipment and systems for nuclear power plants
家用太阳热水器热性能试验方法 Test methods to determine the thermal performance of domestic solar water heaters
焊条烘干炉运行能耗标准 Energy consumption standard in operation of covered electrode furnace
太阳能热利用术语 第一部分 Solar energy - Thermal applications - Terminology part 1
太阳能热利用术语 第二部分 Solar energy - Thermal applications - Terminology part 2
铀矿石中铀的测定 电位滴定法 Determination of uranium content in uranium ores by method of potentiometric titration
轻水堆核电厂辐射屏蔽检测大纲 Program for testing radiation shields in light water reactors (LWR)
核电厂优先电源 Standard for preferred power supply for nuclear power plants
金硅面垒型探测器 Partially depleted gold silicon surface barrier detectors
硅(锂)X射线探测器系统 Si(Li)X-ray detector system
γ射线G-M计数管 G-M counter tubes for detecting γ radiation
碘化钠(铊)闪烁体 Thallium-activated sodium iodide scintillator
碘化钠(铊)闪烁探测器 Scintillation detectors of sodium iodide (thallium)
企业节能量计算方法 Method of calculating energy saved in industrial enterprise
核电厂安全系统准则 Criteria for safety systems for nuclear power plants
核电厂安全重要系统和部件的实体防护 Physical protection for safety-related systems and components in nuclear power plants
核电厂安全级电气设备和电路独立性准则 Criteria for independence of class 1E equipment and circuits in nuclear power plants
工业燃料炉热平衡测定与计算基本规则 Basic rules for the measurement and calculation of thermal equilibrium of fuel-fired furnace in industry
绝热用玻璃棉及其制品 Glass wool and their products for thermal insulation
工业仪表用铯-137γ辐射源 Caesium-137 gamma radiation source for industrial gauges
微型中子源反应堆核燃料棒技术条件 Specification of nuclear fuel rods for miniature neutron source reactor
二氧化铀粉末和芯块中氯的测定 高温水解、离子选择性电极法 Determination of chlorine in uranium dioxide powders and pellets by pyrohydrolysis ion-selective electrode method
二氧化铀粉末和芯块中锂、钠、钾、铯的测定 原子吸收分光光度法/ 火焰发射光谱法 Determination of lithium, sodium, potassium and cesium in uranium dioxide powders and pellets by atomic absorption spectrophotometry/flame emission spectrophotometry
二氧化铀粉末和芯块中铜、铁、镍、镁、锰、锌、银的测定 原子吸收分光光度法 Determination of copper, iron nickel magnesium, manganese, zinc, and silver in uranium dioxide powders and pellets by atomic absorption spectrophotometry
二氧化铀粉末和芯块中杂质元素的测定 ICP-AES 法 Determination of trace elements in uranium dioxide powders and pellets by ICP-AES
二氧化铀粉末和芯块中钆、钐、镝和铕的测定 水平式ICP-AES 法 Determination of gadolinium, samarium, dysprosium and europium in uranium dioxide powders and pellets by horizontal ICP-AES
八氧化三铀中杂质元素的光谱测定--氧化镓载带法 Spectrographic analysis of uranium oxide (U3O8) by gallium oxide-carrier technique
天然六氟化铀 技术条件 Natural uranium hexafluoride--Specification
塑料闪烁体 Plastic scintillators
电力设备带电水冲洗规程 Regulation of hot washing for electric power apparatus
汽轮机安全监视装置技术条件 Specification for steam turbine safety monitoring devices
工矿企业电力变压器经济运行导则 Guides for the power transformers energy saving operation in factories and mines
交流电气传动风机(泵类、压缩机)系统经济运行通则 The general principles of economical operation for fans (pumps, compressors) system of alternating-current electric drive
通风机系统电能平衡测试与计算方法 The methods of electric power balance test and calculation in fan system
泵类系统电能平衡的测试与计算方法 Measurement and calculation methods of electric energy balance for pumps systems
工业用离心泵、混流泵、轴流泵与旋涡泵系统经济运行 Economical operation for industrial centrifugal, mixed flow, axial flow and vortex pump systems
通风机系统经济运行 Economical operation of the fan system
节电措施经济效益计算与评价方法 Methods for calculating and evaluating the economic benefits of electricity saving measures
核电厂安全壳电气贯穿件 Electrical penetration assemblies in containment structures for nuclear power plants
核电厂安全参数显示系统的功能设计准则 Functional design criteria for safety parameter display system for nuclear power plants
核电厂安全系统电气设备抗震鉴定 Seismic qualification of electrical equipment of the safety system for nuclear power plants
单一故障准则应用于核电厂安全系统 Application of the single failure criterion to safety systems in nuclear power plant
核电厂事故监测仪表准则 功能准则 Criteria for accident monitoring instrumentations in nuclear power generating stations - Criteria for functions
核电厂事故监测仪表准则 仪表准则 Criteria for accident monitoring instrumentations in nuclear power generating stations?Criteria for instrumentations
核反应堆保护系统用于非安全目的准则 Nuclear reactor use of the protection system for non-safety purpose
核电厂安全系统中数字计算机的适用准则 Applicable criteria for digital computers in safety systems of nuclear power plants
核电厂控制室的设计 Design for control rooms of nuclear power plants
核电厂辅助控制点设计准则 Design criteria for supplementary control point of nuclear power plants
监督压水堆堆芯充分冷却的测量要求 Measurements for monitoring adequate cooling within the core of pressurized light water reactors
工业锅炉水位控制报警装置 Water level control and alarm devices for industrial boilers
轻型燃气轮机辅助设备通用技术条件 General requirements for light weight gas turbine auxiliary equipment
轻型燃气轮机燃料使用规范 Applied specification of fuels for light weight gas turbine
轻型燃气轮机运输与安装 Light weight gas turbines preparation for shipping and installation
α-,β- 平板标准源通用技术条件 General specifications of α-,β-planar standard sources
核燃料循环放射性流出物归一化排放量管理限值 Authorized limits for normalized releases of radioactive effluents from nuclear fuel cycle
U235丰度低于5%的浓缩六氟化铀技术条件 Standard specification for uranium hexafluoride enriched to less than 5% U235
二氧化铀芯块中碳的测定 Uranium dioxide pellet - Determination of carbon
二氧化铀芯块中总氢的测定 Uranium dioxide pellet - Determination of total hydrogen
六氟化铀中钒的分光光度法测定 Spectrophotometric determination of vanadium in uranium hexafluoride
六氟化铀中钼的分光光度法测定 Spectrophotometric determination of molybdenum in uranium hexafluoride
单标准气体质谱法铀同位素分析 Isotopic analysis of uranium by single-standard gas mass-spectrometer method
压水堆核电厂运行工况下的放射性源项 Radioactive source term of PWR nuclear power plant for operational states
海上用太阳电池组件总规范 General specification for sea-use solar cell modules
中小功率柴油机噪声限值 Noise limits for small and medium power diesel engines
燃气轮机 噪声 Gas turbine--Noise
燃气轮机 采购 Gas turbines--Procurement
燃气轮机 验收试验 Gas turbines--Acceptance tests
内燃机活塞环 矩形环 Internal combustion engines--Piston rings--Rectangular rings
内燃机活塞环 梯形环和楔形环 Internal combustion engines--Piston rings--Keystone rings and half keystone rings
核热电厂辐射防护规定 Regulations for radiation protection of nuclear heat power plant
柴油机机油消耗测定方法 Measurement of lubricant oil consumption for diesel engines
轻型燃气轮机控制和保护系统 Control and protective system for light weight gas turbine
锅炉用水和冷却水分析方法 固体物质的测定 Analysis of water used in boiler and cooling system--Determination of solids matter
锅炉蒸汽的采样方法 Methods for sampling boiler steem
锅炉用水和冷却水分析方法 全硅的测定 Analysis of water used in boiler and cooling system--Determination of total silica
锅炉用水和冷却水分析方法 铜的测定 Analysis of water used in boiler and cooling system--Determination of copper
锅炉用水和冷却水分析方法 碱度的测定 Analysis of water used in boiler and cooling system--Determination of alkalinity
锅炉用水和冷却水分析方法 化学耗氧量的测定 重铬酸钾快速法 Analysis of water used in boiler and cooling system--Determination of chemical oxygen demand--Rapid method with potassium dichromate
锅炉用水和冷却水分析方法 聚丙烯酸的测定 比浊法 Analysis of water used in boiler and cooling system--Determination of polyacrylic acid--Turbidimetric method
锅炉用水和冷却水分析方法 苯骈三氮唑的测定 紫外分光光度法 Analysis of water used in boiler and cooling system--Determination of benzotriazole--Ultraviolet spectrophotometry
锅炉用水和冷却水分析方法 2-巯基苯骈噻唑的测定 紫外分光光度法 Analysis of water used in boiler and cooling system--2-Mercaptobenzothiazole--Ultraviolet spectrophotometry
锅炉用水和冷却水分析方法 余氯的测定 Analysis of water used in boiler and cooling system--Determination of free chlorine residuals
锅炉用水和冷却水分析方法 硫化氢的测定 分光光度法 Analysis of water used in boiler and cooling system--Determination of sulfurated hydrogen--Spectrophotometry
锅炉用水和冷却水分析方法 亚硫酸盐的测定 Analysis of water used in boiler and cooling system--Determination of sulfite
锅炉用水和冷却水分析方法 铁的测定 Analysis of water used in boiler and cooling system--Determination of iron
放射性废物管理规定 Regulations for radioactive waste management
六氟化铀中硼的测定 化学光谱法 Spectrochemical determination of boron in uranium hexafluoride
六氟化铀中磷的测定 分光光度法 Spectrophotometric determination of phosphorus in uranium hexafluoride
六氟化铀中钨、钼、铌、钛、锆的测定 化学光谱法 Spectrochemical determination of tungsten,molybdenum, niobium,titanium and zirconium in uranium hexafluoride
六氟化铀中硅的测定 分光光度法 Spectrophotometric determination of silicon in uranium hexafluoride
六氟化铀中钛的测定 分光光度法 Spectrophotometric determination of titanium in uranium hexafluoride
六氟化铀中铀的测定 Determination of uranium in uranium hexafluoride
放射性同位素产品的分类和命名原则 General principle of nomenclature and classification of radioisotope products
电厂运行中汽轮机用矿物油维护管理导则 Guide for maintenance and supervision of inservice turbine mineral oil used for power plants
运行中变压器油维护管理导则 Guide for maintenance and supervision of transformer oil in service
核电厂安全级直流电力系统设计准则 Criteria for the design of safety-related DC auxiliary power systems for nuclear power plants
电能质量 公用电网谐波 Quality of electric energy supply--Harmonics in public supply network
低、中水平放射性废物固化体性能要求 沥青固化体 Characteristic requirements for solidified waste of low-and intermediate-level radioactive waste--Bitumen solidified waste
铀、钍矿冶放射性废物安全管理技术规定 Regulations for safe management of radioactive wastes from the mining and milling of uranium and thorium ores
铀矿冶设施退役环境管理技术规定 Technical regulations for the environmental management of decommissioning of uranium mining and milling facilities
轻水堆核电厂放射性废水排放系统技术规定 Technical rules for discharge system of radioactive waste water from LWR nuclear power plant
反应堆退役环境管理技术规定 Technical regulations for environmental management of reactor decommissioning
核电厂低、中水平放射性固体废物暂时贮存技术规定 Technical rules for interim storage of low and intermediate level solid radioactive waste from nuclear power plant
大型液压式启闭机 Heavy hydraulic hoister
燃气轮机总装技术条件 Assembling technical specifications for gas turbine
热管术语 Heat pipe terminology
重力热管传热性能试验方法 The testing method of heat transfer performance for gravity heat pipe
热管寿命试验方法 Life testing method for heat pipe
能量利用中的烟分析方法技术导则 Technical guides for exergy analysis
个人中子剂量计的性能要求与刻度(中子能量小于20MeV) Requirements of characteristics and calibration for personal neutron dosimeters(neutron energies less than 20MeV)
燃气轮机术语 Gas turbine terminology
反应堆外易裂变材料的核临界安全 核临界安全行政管理规定 Nuclear criticality safety for fissile materials outside reactors--Administrative regulation for nuclear criticality safety
反应堆外易裂变材料的核临界安全 易裂变材料操作、加工、处理的基本技术准则与次临界限值 Nuclear criticality safety for fissile materials outside reactor--Basic technical criteria and subcritical limits for handling,processing and operations of fissile materials
反应堆外易裂变材料的核临界安全 易裂变材料贮存的核临界安全要求 Nuclear criticality safety for fissile materials outside reactor--Requirements for nuclear criticality safety in the storage of fissile material
反应堆外易裂变材料的核临界安全 含易裂变物质水溶液的钢质管道交接的核临界安全准则 Nuclear criticality safety for fissile materials outside reactor--Nuclear criticality safety criteria for steel-pipe intersections containing aqueous solutions of fissile material
反应堆外易裂变材料的核临界安全 钚- 天然铀混合物的核临界控制准则和次临界限值 Nuclear criticality safety for fissile materials outside reactors--Nuclear criticality control criteria and subcritical limits for plutonium-natural uranium mixtures
反应堆外易裂变材料的核临界安全 硼硅酸盐玻璃拉希环及其应用准则 Nuclear criticality safety for fissile materials outside reactor--Borosilicate glass Raschig rings and its application criteria
反应堆外易裂变材料的核临界安全 次临界中子增殖就地测量安全规定 Nuclear criticality safety for fissile materials outside reactors--Safety controls in conducting subcritical neutron multiplication measurements in situ
反应堆外易裂变材料的核临界安全 核临界事故探测与报警系统的性能及检验要求 Nuclear criticality safety for fissile materials outside reactor--Performance and testing requirements for nuclear criticality detection and alarm systems
反应堆外易裂变材料的核临界安全堆外操作、贮存、运输轻水堆燃料单元的核临界安全准则 Nuclear oriticality safety for fissile materials outside reactors--Criticality safety criteria for the handling,storage and transportation of LWR fuel unit outside reactors
反应堆外易裂变材料的核临界安全 固定中子吸收体的应用安全要求 Nuclear criticality safety for fissile materials outside reactors Safety requirements for the use of fixed neutron absorbers
核燃料组件零部件的渗透检验方法 Liquid penetrant examination for component parts of nuclear fuel assemblies
电力负荷控制系统通用技术条件 General specification for load control systems
电力系统窄带命令式远方保护设备技术要求及试验方法 Performance and testing of teleprotection equipment of power systems narrow-band command systems
电力系统远方保护设备的性能及试验方法 第2部分: 模拟比较系统 Performance and testing of teleprotection eguipment of power systems Part 2: Analogue comparison systems
远动设备及系统 第2部分: 工作条件 第1篇 电源和电磁兼容性 Telecontrol equipment and systems Part 2: Operating conditions Section 1: Power supply and electromagnetic compatibility
远动设备及系统 第2部分: 工作条件 第2篇 环境条件(气候、机械和其它非电影响因素) Telecontrol equipment and systems Part 2: Operating conditions Section2: Environmental conditions (Climatic,mechanical and other non-electrical influences)
放射性物质运输包装质量保证 Quality assurance for packaging used in the transport of radioactive materials
节能监测技术通则 General principles for monitoring and testing of energy conservation
工业锅炉节能监测方法 Monitoring and testing method for energy saving of industrial boilers
工业热处理电炉节能监测方法 Monitoring and testing method for energy saving of electroheat furnace in industrial heat treating
火焰加热炉节能监测方法 Monitoring and testing method for energy saving of flame heating furnace
节能产品评价导则 Evaluation guides of the energy conservation products
电厂粉煤灰渣排放与综合利用技术通则 General principle for discharge and utilization technology of ash and slag in power station
空冷式换热器 Air cooled heat exchanger
水轮机模型验收试验规程 Code for model acceptance tests of hydraulic turbines
燃气轮机辅助设备通用技术要求 General requirements for gas turbine auxiliary equipment
小型汽油机噪声限值 Noise limitation of small gasoline engine
2×600MW压水堆核电厂核岛系统设计建造规范 Design and construction rules for nuclear island systems of 2×600MW PWR nuclear power plants
林业用小型汽油机通用技术条件 Small gasoline engines for forestry--General technical requirements
核临界事故剂量测定 Dosimetry for criticality accidents
密封放射源的泄漏检验方法 Sealed radioactive sources--Leakage test methods
热力输送系统节能监测方法 Monitoring and testing method for energy saving of heat transmission and distribution system
工业电热设备节能监测方法 Monitoring and testing method for energy saving of electroheat device in industry
活塞式单级制冷机组及其供冷系统节能监测方法 Monitoring and testing method for energy saving of single--stage reciprocating refrigerating unit and its refrigeration system
风机机组与管网系统节能监测方法 Monitoring and testing method for energy saving of fan unit and distribution tube system
蒸汽加热设备节能监测方法 Monitoring and testing method for energy saving of steam heating equipments
电能质量 电力系统频率允许偏差 Quality of electric energy supply--Permissible deviation of frequency for power system
滨海电厂海水冷却水系统牺牲阳极阴极保护 Sacrificial anode cathodic protection for seawater cooling system in coastal power station
固定式锅炉建造规程 Rules for construction of stationary boilers
锅壳锅炉受压元件强度计算 Strength calculation of pressure parts for shell boilers
企业能量平衡统计方法 Statistical method of energy balance in enterprises
企业能量平衡表编制方法 Methods of drawing up energy balance table in enterpuises
企业能源网络图绘制方法 Methods of drawing energy network diagram in enterprises
设备及管道保冷效果的测试与评价 Methods of measuring and evaluating low-temperature insulation effects for equipments and pipes
工业炉窑保温技术通则 General principles for thermal insulation technique of industrial furnaces
轻型燃气轮机电气设备通用技术要求 General specification for lightweight gas turbine electrical equipment
企业供配电系统节能监测方法 Monitoring and testing method for energy saving of power supply distribution system of industrial enterprise
空气压缩机组及供气系统节能监测方法 Mornitoring and testing method for energy saving of air compressor unit and air distribution system
泵机组液体输送系统节能监测方法 Monitoring and testing method for energy saving of motor-pump liquid transport system
电焊设备节能监测方法 Monitoring and testing method for energy saving of electrical welding installation
压水堆核电厂核岛机械设备设计规范 Design rules for mechanical components of pwr nuclear islemds
铀矿地质样品中锗的测定 水杨基萤光酮分光光度法 Determination of germanium in uranium geological samples--Salicyl fluorone spectrophotometry
全玻璃真空太阳集热管 All-glass evacuated solar collector tubes
热辐射术语 Thermal radiation terms
企业能源审计技术通则 General principle of energy audit on industrial and commercial enterprise
企业能源计量器具配备与管理导则 Guides for providing and managing of the measuring instruments of energy in enterprise
水力机械振动和脉动现场测试规程 Code for field measurement of vibrations and pulsations in hydraulic machines
设备及管道绝热层表面热损失现场测定 热流计法 In-situ measurements of heat loss in thermal insulation of equipments and pipes-Heat flow meter apparatus
热处理生产电耗定额及其计算和测定方法 Power consumption quota and its counting and testing method in heat treating production
取水许可技术考核与管理通则 General regulation on technical assessment and management for water licensing
远动设备及系统 第4部分: 性能要求 Telecontrol equipment and systems Part 4: Performance requirements
锅炉热网系统能源监测与计量仪表配备原则 Principles for providing of monitoring and measuring instruments of energy in boiler heating network system
六氟化铀中钐、铕、钆、镝、镉、钽的测定 化学光谱法 Spectrochemical determination of samarium,europium,gadolinium,dysprosium,cadmium,tantalum in uranium hexafluoride
微型水力发电设备基本技术要求 General requirements for micro-hydro generator equipments
微型水力发电设备试验方法 Specification for tests of micro-hydro generator equipments
微型水力发电设备质量检验规程 Inspection regulation for micro-hydro generator equipments
微型水力发电设备安装技术规范 Specification for installation of micro-hydro generator equipments
核设施的钢铁和铝再循环再利用的清洁控水平 Clearance levels for recycle and reuse of steel and aluminum from nuclear facilities
Υ辐照装置设计建造和使用规范 Regulations for design construction and use of gamma irradiation facilities
压水堆核电厂物项分级 Classification for the items of pressurized water reactor nuclear power plants
真空管太阳集热器 Evacuated tube solar collector
大中型水电站水库调度规范 Specification of reservoir operation for large and medium-scale hydropower stations
低压电气设备的高电压试验技术 第一部分 定义和试验要求 High-voltage test techniques for low voltage equipment Part 1 Definitions,test and procedure requirements
低压电气设备的高电压试验技术 第二部分 测量系统和试验设备 High-voltage test techniques for low voltage equipment Part 2 Measuring system and test equipment
小型风力发电机组安全要求 Safety of small wind turbine generator systems
岩石中铅、锶、钕同位素测定方法 Determinations for isotopes of lead,strontium and neodymium in rock samples
核电厂应急计划与准备准则 应急计划区的划分 Criteria for emergency planning and preparedness for nuclear power plants--The dividing of emergency planning zone
核电厂应急计划与准备准则 场外应急职能与组织 Criteria for emergency planning and preparedness for nuclear power plants--Off-site emergency functions and organization
核电厂应急计划与准备准则 场外应急设施功能与特性 Criteria for emergency planning and preparedness for nuclear power plants--Functional and physical characteristics of off-site emergency facilities
核电厂应急计划与准备准则 场外应急计划与执行程序 Criteria for emergency planning and preparedness for nuclear power plants--The off-site emergency planning and implementing procedures
核电厂应急计划与准备准则 场外应急响应能力的保持 Criteria for emergency planning and preparedness for nuclear power plants--Maintenance of off-site emergency response capacity
太阳能 在地面不同接收条件下的太阳光谱辐照度标准 第1部分:大气质量1.5的法向直接日射辐照度和半球向日射辐照度 Solar energy--Reference solar spectral irradiance at the ground at different receiving conditions--Part 1: Direct normal and hemispherical solar irradiance for air mass 1.5
工业锅炉及火焰加热炉烟气余热资源量计算方法与利用导则 Calculating method and utilization guides for waste heat resource's quantity of industrial boiler's and flame heating furnace's waste gas
技术能量系统 基本概念 Technical energy systems--Basic concepts
往复式内燃机 图形符号 Reciprocating internal combustion engines--Graphical symbols
柴油机进、排气流量的测量 Measurement of intake air or exhaust gas flow of diesel engines
钍矿石中钍的测定 N263分离EDTA滴定法 Determination of thorium in thorium--ores N263 separation EDTA titration method
管形荧光灯镇流器能效限定值及节能评价值 Limited values of energy efficiency and evaluating values of energy conservation of ballasts for tubular fluorescent lamps
工业锅炉经济运行 Economical operation of industrial boilers
空气调节系统经济运行 Economic operation of air conditioning systems
设备及管道绝热层表面热损失现场测定 表面温度法 In-situ measurements of heat loss through thermal insulation of equipments and pipes-surface temperature method
小水电站机电设备导则 Electromechanical equipment guide for small hydroelectric installations
晶体硅光伏(PV)方阵I-V特性的现场测量 Crystalline silicon photovoltaic(PV) array-on-site measurement of I-V characteristics
生活锅炉经济运行 Economical operation of boilers for daily life
电力整流设备运行效率的在线测量 On-line measurement on operating efficiency of power convertor equipments
溴化锂吸收式冷(温)水机组安全要求 Safety requirements of lithium bromide absorption water chiller (heater)
直燃型溴化锂吸收式冷(温)水机组 Direct-fired lithium bromide absorption water chiller (heater)
风力发电机组 安全要求 Wind turbine generator systems Safety requirements
地面用光伏(PV)发电系统 概述和导则 Terrestrial photovoltaic(PV) power generating systems General and guide
电能质量 暂时过电压和瞬态过电压 Power quality Temporary and transient overvoltages
可逆式抽水蓄能机组起动试验规程 Start-up test code for reversible pump-storage units
制冷术语 Terminology of refrigeration
标准电压 Standard voltages
高压输变电设备的绝缘配合 Insulation co-ordination for high voltage transmission and distribution equipment
高压输变电设备的绝缘配合使用导侧 Application guide for insulation co-ordination of high voltage transmission and transformation equipment
绝缘油介电强度测定法 Insulating oils--Determination of the dielectric strength
旋转电机 定额和性能 Rotating electrical machines--Rating and performance
旋转电机 圆柱形轴伸 Cylindrical shaft extension for rotating electrical machines
旋转电机 圆锥形轴伸 Conical snaft extension for rotating electrical machines
标准电流 Standard current
电力电缆介质损失角正切值测量方法 (交流高压电桥法) Methods of measurement of value of dielectric loss tangent for power cables (high voltage alternating current bridge method)
高压绝缘子瓷件 技术条件 Technical specifications of porcelain element for high voltage insulators
低压绝缘子瓷件技术条件 Specification of porcelain element for low voltage insulators
架空通信线路针式瓷绝缘子 Pin-type insulators of ceramic material for overhead telegraph lines
绝缘子试验方法 第1部分:一般试验方法 Test method for insulators - Part 1:General test methods
绝缘子试验方法 第2部分:电气试验方法 Test method for insulators - Part 2:Electrical test methods
绝缘子试验方法 第3部分:机械试验方法 Test method for insulators - Part 3:Mechanical test methods
电机结构及安装型式代号 Symbols for types of construction and mounting arrangements of rotating electrical machinery
直流电力牵引额定电压 Voltage ratings of D.C electric traction system
高压线路针式瓷绝缘子技术条件 Pin insulators of ceramic material for high voltage overhead lines--Technical specifications
高压线路针式瓷绝缘子尺寸与特性 Pin insulators of ceramic material for high voltage verhead lines--Dimensions and characteristics
盘形悬式绝缘子技术条件 The cap and pin type insulators--Technical specification
家用和类似用途单相插头插座 型式、基本参数和尺寸 Single phase plugs and socket-outlets for household and similar purposes-Types,basic parameters and dimensions
家用和类似用途三相插头插座型式、基本参数和尺寸 Three phases plugs and socket-outlets for household and similar purposes-Types,basic parameters and dimensions
白炽灯灯座型式、基本参数与尺寸 Types, fundamental parameters and dimensions of holders for incandescent lamps
三相同步电机试验方法 Test procedures for three-phase synchronous machines
三相异步电动机试验方法 Test procedure for three-phase induction motors
电力变压器 第一部分 总则 Power transformers--Part 1: General
电力变压器 第二部分 温升 Power transformers--Part 2: Temperature rise
电力变压器 第三部分 绝缘水平和绝缘试验 Power transformers--Part 3: Insulation levels and dielectric tests
电力变压器 第五部分 承受短路的能力 Power transformers--Part 5: Ability to withstand short circuit
圆线同心绞架空导线 Round wire concentric lay overhead electrical stranded conductors
电压互感器 Voltage transformers
电流互感器 Current transformers
环氧玻璃布层压板 Epoxide woven glass fabric laminated sheet
电气绝缘热固性层压材料检验、标志、包装、运输和贮存通用规则 The general rules of electrical insulating laminated materials based on thermosetting resins for examining,marking, packing, transporation and storage
电气绝缘漆布试验方法 Test methods for varnished fabrics for electrical insulation
电气绝缘漆布检验、标志、包装、运输、贮存通用规则 General rules for inspection, packaging, storage transportation and of varnished fabrics for electrical insulation
直流电机试验方法 Test procedure for direct current machines
管形荧光灯座和启动器座技术条件 Technical requirements of lampholders for tubular fluorescent lamps and starterholders
低压电力线路绝缘子 第1部分:低压架空电力线路绝缘子 Insulators for low voltage power lines Part 1: Insulators for low voltage overhead power lines
低压电力线路绝缘子 第2部分:架空电力线路用拉紧绝缘子 Insulators for low voltage power lines Part 2: Strain insulators for overhead power lines
低压电力线路绝缘子 第3部分:低压布线用绝缘子 Insulators for low voltage power lines Part 3: Insulators for low voltage wiring
低压电力线路绝缘子 第4部分:电车线路用绝缘子 Insulators for low voltage power lines Part 4: Insulators for trolley overhead lines
高压线路蝶式绝缘子 Shackle insulators for high voltage overhead lines
铁道干线电力牵引交流电压 A.C.Voltage of electric traction for the railway main lines
螺口式灯头的型式和尺寸 Types and dimensions of Edison screw lamp caps
卡口式灯头的形式和尺寸 Types and dimentions of bayonet lamp caps
固体绝缘材料电气强度试验方法 工频下的试验 Methods of test for electric strength of solid insulating materials-Tests at power frequencies
固体绝缘材料在工频、音频、高频(包括米波长在内)下相对介电常数和介质损耗因数的试验方法 Methods for the determination of the permittivity and dielectric dissipation factor of solid electrical insulating materials at power audio and radio frequensies including metre wavelengths
固体绝缘材料体积电阻率和表面电阻率试验方法 Methods of test for volume resistivity and surface resistivity of solid insulating materials
固体电工绝缘材料高压小电流间歇耐电弧试验方法 Solid electric insulating materials--Test methods of high-voltage small-current intermittent arc resistance
防爆灯具专用螺口式灯座 Edison screw lampholders specially used for explosion-proof luminaires
镓 Gallium
螺口式灯头的量规 Gauges of edison screw lamp caps
钠钙硅铝硼玻璃化学分析方法 Methods of chemical analysis of sodalime-alumina and borosilicate glass
半导体单晶晶向测定方法 Test methods for determining the orientation of a semiconductor single crystal
硅中代位碳原子含量红外吸收测量方法 Test method for substitutional atomic carbon content of silicon by infrared absorption
绝缘漆漆膜制备法 Method of producing films of electrical insulating varnishes on test panels
绝缘漆漆膜吸水率测定法 Method of test for water absorption rate of electrical insulating varnish films
绝缘漆漆膜耐油性测定法 Method of test for transformer oil resistance of electrical insulating varnish films
未漂浸渍绝缘纸 Unbleached impregnating insulating paper
漂白浸渍绝缘纸 Bleached impregnating insulating paper
电机线端标志与旋转方向 Terminal markings and direction of rotation of rotating electrical machines
标准频率 Standard frequencies
有溶剂绝缘漆试验方法 Test methods for insulating varnishes containing solvent
交流高压断路器 Alternating current high-voltage circuit-breakers
交流高压隔离开关和接地开关 Alternating current high-voltage disconnectors and earthing switches
旋转电机冷却方法 Cooling methods for rotating electrical machines
家用和类似用途插头插座 第一部分: 通用要求 Plugs and socket-outlets for household and similar purposes--Part 1: General requirements
家用和类似用途插头插座 第二部分: 器具插座的特殊要求 Plugs and socket-outlets for household and similar purposes--Part 2: Particular requirements for socket-outlets for appliances
家用和类似用途插头插座 第二部分: 转换器的特殊要求 Plugs and socket-outlets for household and similar purposes--Part 2: Particular requirement for adaptors
管形荧光灯镇流器一般要求和安全要求 Ballasts for tubular fluorescent lamps general and safety requirements
电力金具通用技术条件 General technical requirements for electric power fittings
电力金具 标称破坏载荷系列及连接型式尺寸 Nominal failing load series and coupling dimensions for electric power fittings
电力金具 机械试验方法 Mechanical tests for electric power fittings
电力金具 电晕和无线电干扰试验 Corona and RIV tests for electric power fittings
电力金具 热循环试验方法 Heat cycle tests for electric power fittings
电力金具 验收规则, 标志与包装 Acceptance inspection,marking and packing for electric power fittings
预绞丝 Preformed armour rods
防振锤技术条件 Technical requirements for damper
间隔棒 Spacer
T形线夹 T-connector
设备线夹 Terminal clamp
电工成套装置中的导线颜色 Colours of insulated conductors used in electrical assembly devices
电工成套装置中的指示灯和按钮的颜色 Colours of indicator lights and push-buttons used in electrical assembly devices
输电线路铁塔制造技术条件 Transmission line towers--Technical requirements for manufacturing
灯头总技术条件 General specifications for lamp caps
圆筒式和凹式灯头的型式和尺寸 Types and dimensions of cylindrical and recessed caps
插脚式灯头的型式和尺寸 Types and dimensions of pin lamp caps
预聚焦式灯头的型式和尺寸 Types and dimensions of prefocus caps
井用潜水三相异步电动机 Submersible motor for deep well
往复式内燃机驱动的交流发电机组 第1部分: 用途、定额和性能 Reciprocating internal combustion engine driven alternating current generating sets--Part 1: Application, ratings and performance
往复式内燃机驱动的交流发电机组 第2部分: 发动机 Reciprocating internal combustion engine driven alternating current generating sets--Part 2: Engines
往复式内燃机驱动的交流发电机组 第3部分: 发电机组用交流发电机 Reciprocating internal combustion engine driven alternating current generating sets--Part 3: Alternating current generators for generating sets
往复式内燃机驱动的交流发电机组 第4部分: 控制装置和开关装置 Reciprocating internal combustion engine driven alternating current generating sets--Part 4: Controlgear and switchgear
往复式内燃机驱动的交流发电机组 第5部分: 发电机组 Reciprocating internal combustion engine driven alternating current generating sets--Part 5: Generating sets
往复式内燃机驱动的交流发电机组 第6部分; 试验方法 Reciprocating internal combustion engine driven alternating current generating sets--Part 6: Test methods
工业硅技术条件 Technical requirements for silicon metal
电工术语 基本术语 Electrotechnical terminology - Fundamental terms
电工术语 电炭 Electrotechnical terminology--Electrical carbon
电工术语 绝缘子 Electrotechnical terminology--Insulator
电工术语 变压器、互感器、调压器和电抗器 Electrotechnical terminology Transformer,instrument transformer,voltage regulator and reactor
电工术语 电力电容器 Electrotechnical terminology--Power capacitors
电工术语 爆炸性环境用电气设备 Electrotechnical terminology electrical apparatus for explosivs atmospheres
电工术语 电力牵引 Electrotechnical terminology--Electric traction
电工术语 水轮机、蓄能泵和水泵水轮机 Electrotechnical terminology--Hydraulic turbine, storage pump and pump-turbine
电工术语 架空线路 Overhead lines--Vocabulary
电工术语 发电、输电及配电 发电 Electrotechnical terminology Generation,transmission and distribution of electricity--Generation
电缆绝缘和护套材料通用试验方法 第1部分: 通用试验方法 第1节: 厚度和外形尺寸测量--机械性能试验 Common test methods for insulating and sheathing materials of electric cables--Part 1: Methods for general application--Section one: Measurement of thickness and overall dimensions--Tests for determining the mechanical properties
电缆绝缘和护套材料通用试验方法 第1部分: 通用试验方法 第2节: 热老化试验方法 Common test methods for insulating and sheating materials of electric cables--Part 1: Methods for general application--Section two: Thermal ageing methods
电缆绝缘和护套材料通用试验方法 第1部分: 通用试验方法 第3节: 密度测定方法--吸水试验--收缩试验 Common test methods for insulating and sheathing materials of electric cable--Part 1: Methods for general application--Section three: Methods for determining the density--Water absorption tests--Shrinkage test
电缆绝缘和护套材料通用试验方法 第1部分; 通用试验方法 第4部分: 低温试验 Common test methods for insulating and sheating material of electric cables--Part 1: Methods for general application--Section four:Test at low temperature
电缆绝缘和护套材料通用试验方法 第2部分: 弹性体混合料专用试验方法 第1节: 耐臭氧试验--热延伸试验 浸矿物油试验 Common test methods for insulating and sheathing materials of electric cables--Part 2: Methods specific to elastomeric compounds-- Section one:Ozone resistance test--Hot set test--Mineral oil immersion test
电缆绝缘和护套材料通用试验方法 第3部分: 聚氯乙烯混合料专用试验方法 第1节: 高温压力试验--抗开裂试验 Common test methods for insulating and sheathing materials of electric cables--Part 3: Methods specific to PVC compounds--Section one--Pressure test at high temperature--Test for resistance to cracking
电缆绝缘和护套材料通用试验方法 第3部分: 聚氯乙烯混合料专用试验方法 第2节: 失重试验--热稳定性试验 Common test methods for insulating and sheathing materials of electric cables--Part 3: Methods specific to pvc compounds--Section two:Loss of mass test--Thermal stability test
电缆绝缘和护套材料通用试验方法 第4部分: 聚乙烯和聚丙烯混合料专用试验方法 第1节: 耐环境应力开裂试验--空气热老化后的卷绕试验--熔体指数测量方法--聚乙烯中炭黑和/或矿物质填料含量的测量方法 Common test methods for insulating and sheathing materials of electric cables--Part 4: Methods specific to polyethylene and polypropylene compounds--Section one:Resistance to environmental stress cracking--Wrapping test after thermal ageing ageing in
电缆绝缘和护套材料通用试验方法 第4部分: 聚乙烯和聚丙烯混合料专用试验方法 第2节: 预处理后断裂伸长率试验--预处理后卷绕试验--空气热老化后的卷绕试验--测定质量的增加 附录A:长期热稳定性试验 附录B:铜催化 Common test methods for insulating and sheathing materials of electric cables--Part 4: Methods specific to polyethylene and polypropylene compounds-Section two: Elongation at break after pre-conditioning--Wrapping test after pre-conditioning--Wr
电缆绝缘和护套材料的通用试验方法 第5部分: 填充膏专用试验方法 第1节: 滴点--油分离--低温脆性--总酸值--腐蚀性--23℃时的介电常数--23℃和100℃时的直流电阻率 Common test methods for insulating and sheathing materials of electric cables--Part 5: Methods specific to filling compounds-- Section one: Drop-point--Separation of oil--Lower temperature brittleness--Total acid number--Absence of corrosive componen
电线电缆机械物理性能试验方法 软电线和软电缆曲挠试验 Test method for determining mechanical and physical properties of electric cables and wires--Flexing test for flexible cables and wires
电线电缆机械物理性能试验方法 弯曲试验 Test method for determining mechanical and physical properties of electric cables and wires--Bending test
电线电缆机械物理性能试验方法 外护层环烷酸铜含量试验 Test method for determining mechanical and physical properties of electric cables and wires--Test for copper naphthenate content of protective coverings
电线电缆机械物理性能试验方法 外护层厌氧性细菌腐蚀试验 Test method for determining mechanical and physical properties of electric cables and wires--Test for anaerobe-corrosion of protectrive cover, ings
电线电缆机械物理性能试验方法 盐浴槽试验 Test method for determining mechanical and physical properties of electric cables and wires--Saline bath test
电线电缆机械物理性能试验方法 腐蚀扩展试验 Test method for determining mechanical and physical properties of electric cables and wires--Corrosion spread test
电线电缆机械物理性能试验方法 挤出外套刮磨试验 Test method for determining mechanical and physical properties of electric cables and wires--Test for abrasion of extruded oversheaths
电线电缆机械物理性能试验方法 抗撕试验 Test method for determining mechanical and physical properties of electric cables and wires--Tear test
电线电缆机械物理性能试验方法 氧化诱导期试验 Test method for determining mechanical and physical properties of electric cables and wires--Test for oxidative inductive time
电线电缆 白蚁试验方法 Termite test methods for wires and cables
电缆外护层总则 Protective coverings for electric cables - General
电缆外护层金属套电缆通用外护层 Protective coverings for electric cables - General protective coverings for cables with metallic sheath
电缆外护层 非金属套电缆通用外护层 Protective coverings for electric cables - General protective coverings for cables with non-metallic sheath
电缆外护层 铅套充油电缆特种外护层 Protectives coverings for electric cables - Specific protective coverings for oil-filled cables with lead sheath
电线电缆电性能试验方法 总则 Test methods for determining electrical properties of electric cables and wires--General
电线电缆电性能试验方法 金属导体材料电阻率试验 Test methods for determining electrical properties of electric cables and wires--Measurement of resistivity of metallic conductive materials
电线电缆电性能试验方法 半导电橡塑材料体积电阻率试验 Test methods for determining electrical properties of electric cables and wires--Measurement of volumeresistivity of semi-conducting rubbers and plastics
电线电缆电性能试验方法 导体直流电阻试验 Test methods for determining electrical properties of electric cables and wires--Measurement of D.C. resistance of conductors
电线电缆电性能试验方法 绝缘电阻试验 检流计比较法 Test methods for determining electrical properties of electric cables and wires--Determining insulation resistance--Comparison-galvanometer method
电线电缆电性能试验方法 绝缘电阻试验 电压-电流计 Test methods for determining electrical properties of electric cables and wires--Determining insulation resistance--Voltmeter-ammeter method
电线电缆电性能试验方法 耐电痕试验 Test methods for determining electrical properties of electric cables and wires--Tracking resistance test
电线电缆电性能试验方法 交流电压试验 Test methods for determining electrical properties of electric cables and wires--A.C.voltage tests
电线电缆电性能试验方法 绝缘线芯工频火花试验 Test methods for determining electrical properties of electric cables and wires--A.C. spark test of insulated cores
电线电缆电性能试验方法 挤出防蚀扩套火花试验 Test methods for determining electrical properties of electric cables and wires--Spark of extruded anti-corrosion protective sheaths
电线电缆电性能试验方法 介质损失角正切试验 Test methods for determining electrical properties of electric cables and wires--Dielectric dissipation factor measurement
电线电缆电性能试验方法 局部放电试验 Test methods for determining electrical properties of electric cables and wires--Partial discharge test
电线电缆 冲击电压试验方法 Electric cables and wires--Method for impulse voltage test
电线电缆 直流电压试验方法 Electric cables and wires--Method for D.C. voltage test
电线电缆 绝缘线芯直流火花试验方法 Electric cables and wires--D.C.spark test method for insulated cores
电线电缆电性能试验方法 表面电阻试验 Test methods for determining electrical properties of electric cables and wires--Surface resistance test
石墨电极 Graphite electrodes
高功率石墨电极 High power graphite electrodes
石墨电极抗折强度测定方法 Method for the determination of the flexure strength of graphite electrodes
石墨电极弹性模量测定方法 Method for the determination of the elastic modulus of graphite electrodes
石墨电极氧化性测定方法 Method for the determination of the oxidation resistance of graphite electrodes
石墨电极热膨胀系数 (CTE) 测定方法 Method for the determination of the coefficient thermal expansion of graphite electrodes
保险铅丝 Safety fuses
导电用铝线 Aluminium wires for electric conduction purporse
永磁(硬磁)材料磁性试验方法 Methods of test of the magnetic properties of permanent magnetic (magnetically hard) materials
高压开关设备常温下的机械试验 Mechanical test at ambient temperature for high-voltage switchgear
电力机车通用技术条件 General technical specifications for electric locomotives
电力机车组装后的检查与试验规则 Rules for the inspecting and testing of electric locomotives after completion of construction
电力机车和电动车组额定功率的确定 Definition of the rated output of electric locomotives and motive power units
普通碳素钢电线套管 Plain carbon steel pipes for electric wire
电控设备 第二部分: 装有电子器件的电控设备 Electric-driving controlgear - Part 2: Electric-driving controlgear incorporating electronic devices
特低电压(ELV) 限值 Extra-low voltage (ELV)--limit values
爆炸性气体环境用电气设备 第1部分: 通用要求 Electrical apparatus for explosive gas atmospheres--Part 1: General requirements
爆炸性气体环境用电气设备 第2部分: 隔爆型“d” Electrical apparatus for explosive gas atmospheres--Part 2: Flameproof enclosure “d”
爆炸性气体环境用电气设备 第3部分:增安型“e” Electrical apparatus for explosive gas atmospheres--Part 3: Increased safety “e”
爆炸性气体环境用电气设备 第4部分: 本质安全型“I” Electrical apparatus for explosive gas atmospheres Part 4: Intrinsic safety“I”
爆炸性环境用防爆电气设备 正压型电气设备 "p" Electrical apparatus for explosive atmospheres--Pressurized electrical apparatus "p"
爆炸性环境用防爆电气设备 充油型电气设备 "o" Electrical apparatus for explosive atmospheres--Oil immersed electrical apparatus "o"
爆炸性环境用防爆电气设备 充砂型电气设备 "q" Electrical apparatus for explosive atmospheres--Sand filled electrical apparatus"q"
爆炸性环境用防爆电气设备 无火花型电气设备 "n" Electrical apparatus for explosive atmospheres--Non-sparking electrical apparatus "n"
爆炸性环境用防爆电气设备 浇封型电气设备 "m" Electrical apparatus for explosive atmospheres - Encapsulated electrical apparatus "m"
爆炸性环境用防爆电气设备 气密型电气设备"h" Electrical apparatus for explosive atmospheres - Hermetically sealed electrical apparatus "h"
爆炸性环境用防爆电器设备 最大试验安全间隙测定方法 Electrical apparatus for explosive atmospheres - Method of test for ascertainment of maximum experimental safe gap
爆炸性环境用防爆电器设备 气体或蒸汽混合物按照其最大试验安全间隙和最小点燃电流的分级 Electrical apparatus for explosive atmospheres - Classification of gases or vapours with air according to their maximum experimental safe gaps and minimum igniting currents
爆炸性气体环境用电气设备 第13部分: 爆炸性气体环境用电气设备的检修 Electrical apparatus for explosive gas atmospheres--Part 13: Repair and overhaul for apparatus used in explosive gas atmospheres
爆炸性气体环境用电气设备 第14部分: 危险场所分类 Electrical apparatus for explosive gas atmospheres Part 14: Classification of hazardous areas
爆炸性气体环境用电气设备 第15部分: 危险场所电气安装(煤矿除外) Electrical apparatus for explosive gas atmospheres Part 15: Electrical installation in hazardous areas (other than mines)
硬质合金矫顽 (磁) 力测定方法 Hardmetals--determination of (the magnetization) coercivity
半导体变流器 基本要求的规定 Semiconductor convertors--Specification of basic requirements
半导体变流器 应用导则 Semiconductor convertors--Application guide
半导体变流器 变压器和电抗器 Semiconductor convertors--Transformers and reactors
半导体电力变流器 用于调速电气传动系统的一般要求 第1部分: 关于直流电动机传动额定值的规定 Semiconductor power convertors--Adjustable speed electric drive systems--General requirements Part 1: Rating specifications,particularly for d.c.motor drives
3~35kV交流金属封闭式开关设备 A.C. metal-enclosed switchgear for rated voltages of 3~35kV
中频设备额定电压 Rated voltage for medium frequency equipment
电工用铜线坯 Copper drawing stock for electrical purposes
电工圆铜线 Round copper wire for electrical purposes
电工圆铝线 Round aluminium wire for electrical purposes
电缆的导体 Conductors of insulated cables
35kV及以下变压器瓷套 Porcelain bushing shell for transformer up to 35kV
1.2/4.4mm同轴综合通信电缆 1.2/4.4mm composite coaxial cable for telecommunication use
2.6/9.5mm同轴综合通信电缆 2.6/9.5mm composite coaxial cable for telecommunication use
电器设备接线端子和特定导线线端的识别及应用字母数字系统的通则 Identification of electric equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric system
高压线路悬式绝缘子连接结构和尺寸 Coupling dimensions of suspension insulators for high voltage lines
电气设备安全设计导则 General guide for designing of electrical equipment to satisfy safety requirements
绕组线试验方法 第1部分: 一般规定 Winding wires test methods-Part 1: General
绕组线试验方法 第2部分: 尺寸测量 Winding wires test methods-Part 2: Determination of dimensions
绕组线试验方法 第3部分: 机械性能 Winding wires test methods-Part 3: Mechanical properties
绕组线试验方法 第4部分: 化学性能 Winding wires test methods-Part 4: Chemical properties
绕组线试验方法 第5部分: 电性能 Winding wires test methods-Part 5: Electrical properties
绕组线试验方法 第6部分: 热性能 Winding wires test methods-Part 6: Thermal properties
高压套管技术条件 Technical specification of high voltage bushing
稀土钴永磁材料 Permanent magnetic material of rare earth cobalt
控制电气设备的操作件标准运动方向 Standard directions of movement for actuators which control the operation of electrical apparatus
有机硅层压玻璃布板 Silicone resin glass laminated sheets
固体绝缘材料在潮湿条件下相比漏电起痕指数和耐漏电起痕指数的测定方法 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
半导体硅材料中杂质元素的活化分析方法 The activation analysis method for the determination of elemental impurities in semiconductor silicon materials
非本征半导体单晶霍尔迁移率和霍尔系数测量方法 Extrinsic semiconductor single crystals--measurement of Hall mobility and Hall coefficient
交流高压断路器的合成试验 Synthetic testing of high-voltage alternating current circuit-breakers
交流高压断路器的近区故障试验 Short-line fault tests for A.C. high-voltage circuit-breaker
交流系统用高压绝缘子人工污秽试验方法 盐雾法 Artificial pollution tests on high-voltage insulators to be used on a.c.systems--Salt-fog method
交流系统用高压绝缘子人工污秽试验方法 固体层法 Artificial pollution tests on high-voltage insulators to be used on a.c.systems - solid-layer method
电子设备用三相变压器形铁心 E-cores for three-phase transformers for use in electronic equipment
家用和类似用途电器的安全 热泵、空调器和除湿机的特殊要求 Safety of household and similar electrical appliances--Particular requirements for electrical heat pumps,air-conditioners and dehumidifiers
自动化柴油发电机组分级要求 Automatic diesel generating set, requirements of classification
电气简图用图形符号 第11部分 建筑安装平面布置图 Graphical symbols for diagrams--Part 11: Architectural and topographical installation plans and diagrams
电气图用图形符号 总则 Graphical symbols for electrical diagrams--General imformation
电气简图用图形符号 第2部分 符号要素、限定符号和其它常用符号 Graphical symbols for diagrams Part 2 Symbol elements,qualifying symbols and other symbols having general application
电气简图用图形符号 第3部分 导体和连接件 Graphical symbols for diagrams Part 3 Conductors and connecting devices
电气简图用图形符号 第4部分: 基本无源元件 Graphical symbols for diagrams--Part 4:Basic passive components
电气简图用图形符号 第5部分: 半导体管和电子管 Graphical symbols for diagrams--Part 5: Semiconductors and electron tubes
电气简图用图形符号 第6部分: 电能的发生与转换 Graphical symbols for diagrams--Part 6: Production and conversion of electrical energy
电气简图用图形符号 第7部分: 开关、控制和保护器件 Graphical symbols for diagrams--Part 7: Switchgear,controlgear and protective devices
电气简图用图形符号 第8部分 测量仪表、灯和信号器件 Graphical symbols for diagrams--Part 8: Measuring instruments,lamps and signalling devices
电气简图用图形符号 第9部分:电信: 交换和外围设备 Graphical symbols for diagrams-Part 9: Telecommunications: Switching and peripheral equipment
电气简图用图形符号 第10部分: 电信: 传输 Graphical symbols for diagrams-Part 10: Telecommunications: Transmission
旋转电机尺寸和输出功率等级 第1部分:机座号56 - 400和凸缘号55 - 1080 Dimensions and output series for rotating electrical machines-- Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
旋转电机尺寸和输出功率等级 第2部分:机座号355 - 1000和凸缘号1180 - 2360 Dimensions and output series for rotating electrical machines-- Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360
旋转电机尺寸和输出功率等级 第3部分:小功率装入式电动机 凸缘号BF10 - BF50 Dimensions and output series for rotating electrical machines-- Part 3: Samll built-in motors--Flange numbers BF10 to BF50
电气安全名词术语 Electrical safety terminology
电工电子产品应用环境条件 运输 Environmental conditions existing in the application of electric and electronic products--Transportation
电工电子产品应用环境条件 产品内部的微气候 Environmental conditions existing in application of electric and electronic products Microclimates inside products
电机产品型号编制方法 Specification for model of rotating electrical machi nes
交流高压断路器的线路充电电流开合试验 Line-charging current switching tests for a.c. high voltage circuit-breaker
绝缘导线的标记 Marking of insulated conductors
裸电线试验方法 总则 Test methods for bare wires--General
裸电线试验方法 尺寸测量 Test methods for bare wires--Measurement of dimensions
裸电线试验方法 拉力试验 Test methods for bare wires--Tensile test
裸电线试验方法 扭转试验 Test methods for bare wires--Torsion test
裸电线试验方法 弯曲试验 反复弯曲 Test methods for bare wires--Bend test--Reverse bend test
裸电线试验方法 弯曲试验 单向弯曲 Test methods for bare wires--Bend test--Single bend test
裸电线试验方法 卷绕试验 Test methods for bare wires--Mandrel winding test
裸电线试验方法 硬度试验 布氏法 Test methods for bare wires--Hardness test--Brinell hardness test
裸电线试验方法 镀层连续性试验 多硫化钠法 Test methods for bare wires--Test for continuity of coating--Sodium polysulfide solution method
裸电线试验方法 镀层连续性试验 过硫酸铵法 Test methods for bare wires--Test for continuity of coating--Ammonium persulphate solution method
裸电线试验方法 镀层附着性试验 Test methods for bare wires--Test for adherence of coating
裸电线试验方法 镀层可焊性试验 焊球法 Test methods for bare wires--Solderability test of coating--Solder globule method
镀锡圆铜线 Tinned round copper wire
旋转电机外壳防护分级(IP代码) Classification of degrees of protection provided by enclosures of rotating electrical machines (IP code)
低压电器外壳防护等级 Degrees of protection provided by enclosures for low-voltage apparatus
永磁式低速直流测速发电机通用技术条件 Permanent magnet low speed direct current tachogenerator, General specification for
起动用铅酸蓄电池技术要求 Lead-acid starter batteries--Technical conditions
起动用铅酸蓄电池 产品品种和规格 Lead-acid starter batteries--Kinds of products and specifications
起动用铅酸蓄电池 端子的尺寸和标记 Lead-acid starter batteries--Dimension and marking of terminals
额定电压450/750V及以下橡皮绝缘电缆 第1部分: 一般要求 Rubber insulated cables of rated voltages up to and including 450/750V-Part 1: General requirements
额定电压450/750V及以下橡皮绝缘电缆 第2部分: 试验方法 Rubber insulated cables of rated voltages up to and including 450/750V-Part 2: Test methods
额定电压450/750V及以下橡皮绝缘电缆 第3部分: 耐热硅橡胶绝缘电缆 Rubber insulated cables of rated voltages up to and including 450/750V-Part 3: Heat resistant silicone insulated cables
额定电压450/750V及以下橡皮绝缘电缆 第4部分: 软线和软电缆 Rubber insulated cables of rated voltages up to and including 450/750V-Part 4: Cords and flexible cables
额定电压450/750V及以下橡皮绝缘电缆 第5部分: 电梯电缆 Rubber insulated cables of rated voltages up to and including 450/750V-Part 5: Lift cables
额定电压450/750V及以下橡皮绝缘电缆 第6部分: 电焊机电缆 Rubber insulated cables of rated voltages up to and including 450/750V-Part 6: Arc welding cables
额定电压450/750V及以下橡皮绝缘电缆 第7部分: 耐热乙烯-乙酸乙烯酯橡皮绝缘电缆 Rubber insulated cables of rated voltages up to and including 450/750V-Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
电气绝缘云母制品 试验方法 Mica products for electrical insulation--Methods of test
电气绝缘云母制品 定义和一般要求 Mica products for electrical insulation--Definitions and general requirements
换向器云母板 Rigid mica material for commutator separators
电热设备用云母板 Specification for Rigid mica materials for heating equipment
额定电压450/750V及以下聚氯乙烯绝缘电缆 第1部分: 一般要求 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 1: General requirements
额定电压450/750V 及以下聚氯乙烯绝缘电缆 第2部分: 试验方法 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 2: Test methods
额定电压450/750V及以下聚氯乙烯绝缘电缆 第3部分: 固定布线用无护套电缆 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 3: Non-sheathed cables for fixed wiring
额定电压450/750V及以下聚氯乙烯绝缘电缆 第4部分: 固定布线用护套电缆 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 4: Sheathed cables for fixed wiring
额定电压450/750V及以下聚氯乙烯绝缘电缆 第5部分: 软电缆(软线) Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 5: Flexible cables (cords)
额定电压450/750V及以下聚氯乙烯绝缘电缆 第6部分: 电梯电缆和挠性连接用电缆 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 6: Lift cables and cables for flexible connection
额定电压450/750V及以下聚氯乙烯绝缘电缆 第7部分: 2芯或多芯屏蔽和非屏蔽软电缆 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750V--Part 7: Flexible cables screened and unscreened with two or more conductors
软磁合金振幅磁导率测量方法 The measurement method of amplitude permeability of soft magnetic alloys
电力金具名词术语 Terminology for electric power fittings
设备可靠性试验 总要求 Equipment reliability testing--General requirements
设备可靠性试验 试验周期设计导则 Equipment reliability testing--Guidance for the design of test cycles
设备可靠性试验 可靠性测定试验的点估计和区间估计方法 (指数分布) Equipment reliability testing--Procedure for point estimates and confidence intervals from reliability determination tests(Exponental distribution)
设备可靠性试验成功率的验证试验方案 Equipment reliability testing--compliance test plans for success ratio
设备可靠性试验 恒定失效率假设下的失效率与平均无故障时间的验证试验方案 Equipment reliability testing--Compliance test plans for failure rate and mean time between failures assuming constant failure rate
交流台扇电动机通用技术条件 General specification for AC table-fan motors
电气技术中的项目代号 Item designation in electrotechnology
黑光源的间接评定方法 Method for indirect assessment of black light sources
电气用热固性树脂工业硬质层压板试验方法 Test methods for industrial rigid laminated sheets based on thermosetting resins for electrical purpose
电气绝缘层压管试验方法 Test methods of laminated tubes used for electrical insulation
层压棒 Laminated rods
电气绝缘层压棒试验方法 Test methods of laminated rods used for electrical insulation
电工电子产品着火危险试验 试验方法 扩散型和预混合型火焰试验方法 Fire hazard testing for electric and electronic products Test methods Diffusion type and premixed type flame test methods
电工电子产品着火危险试验 试验方法 1kW标称预混合型试验火焰和导则 Fire hazard testing for electric and electronic products Test methods 1kW nominal pre-mixed test flame and guidance
电工电子产品着火危险试验 试验方法 500W标称试验火焰和导则 Fire hazard testing for electric and electronic products Test methods 500W nominal test flame and guidance
小功率电动机通用技术条件 General technical requirements for small power motors
工业机械电气设备 第1部分: 通用技术条件 Electrical equipment of industrial machines--Part 1: General requirements
锗单晶 Monocrystalline germanium
锗单晶位错腐蚀坑密度测量方法 Germanium monocrystal--Inspection of dislocation etch pit density
变压器、高压电器和套管的接线端子 Terminals for transformers,high-voltage apparatus and bushings
用量热法测定大型交流电机的损耗及效率 Measurement of loss and efficiency for large AC electrical machines by the calorimetric method
通信电缆试验方法 总则 Test methods for communication cable--General
通信电缆试验方法 工作电容试验 电桥法 Test methods for communication cable--Capacitance test--Bridge method
通信电缆试验方法 电容耦合及对地电容不平衡试验 Test methods for communication cable--Capacitance unbalance test
通信电缆试验方法 同轴对端阻抗及内部阻抗不均匀性试验 脉冲法 Test methods for communication cable--Impedance and impedance irregularities test of coaxial pair--Pulse method
通信电缆试验方法 同轴对特性阻抗实部平均值试验 谐振法 Test methods for communication cable--Characteristic impedance test of coaxial pair--Resonance method
通信电缆试验方法 串音衰减试验 比较法 Test methods for communication cable--Crosstalk attenuation test--Comparison method
通信电缆试验方法 衰减常数试验 开短路法 Test methods for communication cable--Attenuation coe-fficient test--Open and short circuit method
通信电缆试验方法 同轴对衰减常数频率特性试验 比较法 Test methods for communication cable--Test for frequency characteristic of attenuation coefficient of coaxial pair--Comparison method
通信电缆试验方法 工频条件下理想屏蔽系数试验 Test methods for communication cable--Test for ideal screening factor measured at power frequency
通信电缆试验方法 同轴对展开长度测量 正弦波法 Test methods for communication cable--Measurement of actual length of coaxial pair--Sine wave method
高压电力设备外绝缘污秽等级 External insulation pollution classes of high-voltage electric power equipments
电工用铜、铝及其合金扁线 第1 部分: 一般规定 Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 1: General
电工用铜、铝及其合金扁线 第2 部分: 铜扁线 Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 2: Copper rectangular conductor
电工用铜、铝及其合金扁线 第3 部分: 铝扁线 Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 3: Aluminium rectangular conductor
电工用铜、铝及其合金扁线 第4 部分: 铜带 Rectangular copper or aluminium and its alloy conductors for electrical purposes--Part 4: Copper strip
电工用铜、铝及其合金母线 第1 部分: 一般规定 Copper or aluminium and its alloy bus bars for electrical purposes--Part 1: General
电工用铜、铝及其合金母线 第2 部分: 铜母线 Copper or aluminium and its alloy bus bars for electrical purposes--Part 2: Copper bus bar
电工用铜、铝及其合金母线 第3 部分: 铝母线 Copper or aluminium and its alloy bus bars for electrical purposes--Part 3: Aluminium bus bar
电触头材料基本性能试验方法 Test methods for essential porperty of electric contact material
银基电触头基本形状、尺寸、符号及标注 Basic shapes, dimensions, symbols and notations of silver based electrical contacts
银镍、银铁电触头技术条件 Technical specification for silver-nickel, silver-iron electrical contacts
矿用隔爆型电磁起动器 Mining type flameproof electric magnetic starters
电气绝缘柔软复合材料 定义及一般要求 Combined flexible materials for electrical insulation--Definitions and general requirements
电气绝缘柔软复合材料 试验方法 Combined flexible materials for electrical insulation--Methods of test
氧化铍瓷导热系数测定方法 Test method for thermal conductivity of beryllium oxide ceramics
液体绝缘材料工频相对介电常数、介质损耗因数和体积电阻率的测量 Measurement of relative permittivity, dielectric dissipation factor at power frequency and volume resistivity of insulating liquids
机车司机室了望条件 Visibility conditions for driver's cabs of locomotives
机车司机室前窗、侧窗及其他窗的配置 Position of front and side windows and other windows for driver's cabs of locomotives
绕组线导体 第1部分:一般规定 Conductors for winding wires - Part 1: General
绕组线导体 第2部分:圆线的尺寸 Conductors for winding wires - Part 2: Dimensions of round conductors
绕组线导体 第3部分:扁线的尺寸 Conductors for winding wires - Part 3: Dimensions of rectangular conductors
漆包圆绕组线 第一部分: 一般规定 Enamelled round winding wires - Part 1: General
漆包圆绕组线 第二部分: 155 级改性聚酯漆包铜圆线 Enamelled round winding wires - Part 2: Modified polyester enamelled round copper wires, class 155
漆包圆绕组线 第三部分: 高强度缩醛漆包圆铜线 Enamelled round winding wires--Part 3: Polyvinyl-formal enamelled round copper wires with high mechanical properties
漆包圆绕组线 第4 部分: 直焊性聚氨酯漆包圆铜线 Enamelled round winding wires--Part 4: Self-fiuxing polyurethane enamelled round copper wires
漆包圆绕组线 第5部分: 温度指数180的聚酯亚胺漆包圆铜线 Enamelled round winding wires--Part 5: Polyesterimide enamelled round copper wires with a temperature index of 180
漆包圆绕组线 第6部分: 温度指数220的聚酰亚胺漆包圆铜线 Enamelled round winding wires--Part 6: Polyimide enamelled round copper wires with a temperature index of 220
漆包圆绕组线 第七部分: 130 级聚酯漆包铜圆线 Enamelled round winding wires - Part 7: Polyester enamelled round copper wires, class 130
漆包圆绕组线 第八部分: 热粘合或溶剂粘合聚酯漆包圆铜线 Enamelled round winding wires - Part 8: Heat or solvent bonding polyester enamelled round copper wires
漆包圆绕组线 第九部分: 热粘合或溶剂粘合直焊性聚氨酯漆包圆铜线 Enamelled round winding wires - Part 9: Heat or solvent bonding solderable polyurethane enamelled round copper wires
漆包圆绕组线 第十部分: 180级聚酯亚胺/聚酰胺复合漆包铜圆线 Enamelled round winding wires - Part 10: Polyester(imide) enamelled round copper wires overcoated with polyamide, class 180
漆包圆绕组线 第十一部分: 200级聚酯亚胺/聚酰胺酰亚胺复合漆包铜圆线 Enamelled round winding wires - Part 11: Polyester(imide) enamelled round copper wires overcoated with polyamide-imide, class 200
炭素材料体积密度测定方法 Carbon materials--Determination of the bulk density
炭素材料真密度测定方法 Carbon materials--Determination of the true density
炭素材料真气孔率测定方法 Carbon materials--Determination of the true porosity
干式电力变压器 Dry-type power transformers
三相油浸式电力变压器技术参数和要求 Specification and technical requirements for three-phase oil-immersed power transformers
光伏器件 第1部分: 光伏电流-电压特性的测量 Photovoltaic devices--Part 1: Measurement of photovoltaic current-voltage characteristics
光伏器件 第2部分: 标准太阳电池的要求 Photovoltaic devices--Part 2: Requirements for reference solar cells
光伏器件 第3部分: 地面用光伏器件的测量原理及标准光谱辐照度数据 Photovoltaic devices--Part 3: Measurement principles for terrestrial photovoltaic(PV) solar devices with reference spectral irradiance data
晶体硅光伏器件的I-V实测特性的温度和辐照度修正方法 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
光伏器件 第5部分: 用开路电压法确定光伏(PV)器件的等效电池温度(ECT) Photovoltaic devices-Part 5: Determination of the equivalent cell temperature(ECT) of photovoltaic (PV)devices by the open-circuit voltage method
评定在严酷环境条件下使用的电气绝缘材料耐漏电起痕性和耐电蚀损的试验方法 Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
电气绝缘涂敷粉末试验方法 Test methods for coating powders for electrical insulation
半导体硅片电阻率及硅薄膜薄层电阻测定 非接触涡流法 Test method for measuring resistivity of semiconductor silicon or sheet resistance of semiconductor films with a noncontact eddy-current gage
硅片电阻率测定 扩展电阻探针法 Test method for measuring resistivity of silicon wafers using spreading resistance probe
硅片厚度和总厚度变化测试方法 Test method for thickness and total thickness variation of silicon slices
硅片弯曲度测试方法 Test methods for bow of silicon slices
硅片翘曲度非接触式测试方法 Test method for measuring warp on silicon slices by noncontact scanning
硅抛光片表面平整度测试方法 Test methods for surface flatness of silicon polished slices
硅抛光片表面质量目测检验方法 Standard method for measuring the surface quality of polished silicon slices by visual inspection
人造石英晶体棒材型号命名方法 Designations for lumbered synthetic quartz crystals
炭素材料电阻率测定方法 Method for determination of specific resistance of carbon materials
电力机车防火和消防措施的规程 Regulations relating to fire preventive and fighting measures for electric locomotives
剩余电流动作保护器的一般要求 General requirements for residual current operated protective devices
铁路信号继电器试验方法 Testing methods for railway signal relays
电动力制动和电磁制动系统的特性和试验 Characteristics and tests of electrodynamic and electromagnetic braking systems
电气技术用文件的编制 第1部分: 一般要求 Preparation of documents used in electrotechnology--Part 1: General requirements
电气技术用文件的编制 第2部分: 功能性简图 Preparation of documents used in electrotechnology-Part 2: Function-oriented diagrams
控制系统功能表图的绘制 Preparation of function charts for control systems
电线电缆识别标志 第一部分:一般规定 Markings for electric cables and wires--Part 1: General requirements
电线电缆识别标志 第二部分:标准颜色 Markings for electric cables and wires--Part 2: Standard colours
电线电缆识别标志 第三部分: 电线电缆认别标志 Markings for electric cables and wires--Part 3: Identifications of cables and wires
电线电缆识别标志 第四部分: 电气装备电线电缆绝缘线芯识别标志 Markings for electric cables and wires--Part 4: Identifications of insulated conductors of cables and wires for electrical appliances and equipments
电线电缆识别标志 第五部分: 电力电缆绝缘线芯识别标志 Markings for electric cables and wires--Part 5: Identifications of insulated cores of power cables
插脚式灯头的量规 Gauges of pin lamp caps
灯具一般安全要求与试验 General safety requirements and tests for luminaires
应急照明灯具安全要求 Safety requirements of luminaires for emergency lighting
庭园用的可移式灯具安全要求 Safety requirements of portable luminaires for garden use
儿童感兴趣的可移式灯具安全要求 Safety requirements of portable child-appealing luminaires
道路与街路照明灯具的安全要求 Safety requirements of luminaires for road and street lighting
内装变压器的钨丝灯灯具的安全要求 Safcty requirements of luminaires with built-in transformers for filaments lamps
投光灯具安全要求 Safety requirements for floodlights
游泳池和类似场所用灯具安全要求 Safety requirements of luminaires for swimming pools and similar applications
灯串安全要求 Safety requirements for lighting chains
固定式通用灯具安全要求 Safety requirements for fixed general purpose luminaires
可移式通用灯具安全要求 Safety requirements for portable general purpose luminaires
嵌入式灯具安全要求 Safety requirements for recessed luminaires
手提灯安全要求 Safety requirements for handlamps
通风式灯具安全要求 Safety requirements for air-handling luminaires
舞台灯光、电视、电影及摄影场所(室内外)用灯具安全要求 Safety requirements of luminaires for stage lighting, television, film and photographic studios (outdoor and indoor)
医院和康复大楼 诊所用灯具安全要求 Safety requirements for luminaires used in clinical areas of hospitals and health care buildings
投光照明灯具光度测试 Photometry for floodlight
船用旋转电机基本技术要求 General specificatoins for rotary electrical machines in ships
透平型同步电机技术要求 Requirements for turbine type synchronous machine
漆包扁绕组线 第1部分 一般规定 Enamelled rectangular wires Part 1: General
漆包扁绕组线 第2部分 120级缩醛漆包铜扁铜线 Enamelled rectangular wires Part 2--Polyvinyl-acetal enamelled rectangular copper wires, class 120
漆包扁绕组线 第3部分 155级改性聚酯漆包铜扁线 Enamelled rectangular wires Part 3--Modified polyester enamelled rectangular copper wires,class 155
漆包扁绕组线 第4部分 180级聚酯亚胺漆包铜扁线 Enamelled rectangular wires Part 4--Polyesterimide enamelled rectangular copper wires,class 180
漆包扁绕组线 第5部分 220级聚酰亚胺漆包铜扁线 Enamelled rectangular wires Part 5--Polyimide enamelled rectangular copper wires, class 220
漆包扁绕组线 第6部分 200级聚酯亚胺/聚酰胺酰亚胺复合漆包铜扁线 Enamelled rectangular wires Part 6--Polyester (imide) overcoated with polyamide-imide enamelled rectangular copper wires, class 200
漆包扁绕组线 第7部分 130级聚酯漆包铜扁线 Enamelled rectangular wires Part 7--Polyester enamelled rectangular copper wires, class 130
R03、R1、R6、R14、R20型锌-锰干电池 LR03、LR1、LR6、LR14、LR20型碱性锌-锰干电池 Zinc-manganese dry batteries of R03,R1,R6,R14 and R20 Alkaline zinc-manganese dry batteries of LR03,LR1,LR6,LR14 and LR20
电气绝缘漆管一般要求 General requirements for electrical insulating coated textile sleeving
电器绝缘漆管试验方法 Test methods for electrical insulating coated textile sleeving
电气技术中的文字符号制订通则 General rules for the formulation of letter symbols in electrotechnology
锌银扣式电池 Zine-silver button cells
碱性蓄电池型号命名方法 Designation of alkaline secondary cell
云母纸试验方法 Test methods of mica papers
用液体萃取测定电气绝缘材料离子杂质的试验方法 Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
电解整流设备的整流效率及其供电对象的电能利用率测算方法 Measuring and calculating method on efficiency of rectifiers and their consumers energy-conversion efficiency in electro-chemical industry
电光源的安全要求 Safety requirements of electrical light source
普通照明灯泡的最大外形尺寸 Maximum lamp outlines for general lighting lamps
低压成套开关设备和控制设备 第一部分: 型式试验和部分型式试验成套设备 Low-voltage switchgear and controlgear assemblies--Part 1: Type-tested and partially type-tested assemblies
低压成套开关设备和控制设备 第二部分: 对母线干线系统(母线槽)的特殊要求 Low-voltage switchgear and controlgear assemblies--Part 2: Particular requirements for busbar trunking systems(busways)
低压成套开关设备和控制设备 第三部分: 对非专业人员可进入场地的低压成套开关设备和控制设备--配电板的特殊要求 Low-voltage switchgear and controlgear assemblies Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use--Distribution boards
低压成套开关设备和控制设备 第四部分: 对建筑工地用成套设备(ACS)的特殊要求 Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites(ACS)
低压成套开关设备和控制设备 第五部分: 对户外公共场所的成套设备 动力配电网用电缆分线箱(CDCs)的特殊要求 Low-voltage switchgear and controlgear assemblies Part 5: Particular requirements for assemblies intended to be installed outdoors in public places--Cable distribution cabinets (CDCs)for power distribution in networks
盘形悬式绝缘子串元件尺寸与特性 The string insulator units of the cap and pin type--Dimensions and characteristics
民用机场灯具技术条件 通用要求 Specifications for airport light fixtures--General requirements
不间断电源设备 Uninterruptible power systems
继电器及装置基本试验方法 Basic testing method for relay and equipment
电力系统二次回路电气控制台基本尺寸 Basic dimensions of electrical console for secondary circuit of power system
电力系统二次回路控制、保护屏及柜基本尺寸系列 Series of basic dimensions of control and protective panels and cabinet for secondary circuit of power system
电力系统二次回路控制、保护装置用插箱及插件面板基本尺寸系列 Series of basic dimensions of subracks and associated panels of plugin units for control and protective equipment of secondary circuit of power system
电子设备控制台的布局、型式和基本尺寸 Arrangement, types and basic dimensions for electronic equipment consoles
交流伺服电动机通用技术条件 General specification for A.C servomotors
控制微电机基本技术要求 General requirements for electrical micro machine for automatic control system
控制电机基本外形结构型式 Basic outline constructional type for control motors and feedback components
电气系统说明书用简图的编制 Preparation of diagrams for electrical system manuals
牵引用铅酸蓄电池 Lead-acid traction batteries
牵引用铅酸蓄电池 产品品种和规格 Lead-acid traction batteries--Product types and specifications
内燃机车用排气式铅酸蓄电池 Vented lead--acid batteries for diesel locomotives
内燃机车用阀控密封式铅酸蓄电池 Vavle regulated lead-acid batteries for diesel locomotives
数据元和交换格式 信息交换 日期和时间表示法 Data elements and interchance foemats--Information interchange--Representation of tates and times
同步电机励磁系统 定义 Excitation system for synchronous electrical machines--Definitions
同步电机励磁系统 电力系统研究用模型 Excitation system for synchronous electrical machines--Model for power system studies
同步电机励磁系统 大、中型同步发电机励磁系统技术要求 Excitation system for synchronous electrical machines--Technical requirements excitation system for large and medium synchronous generators
AX系列继电器 AX Series relays
电力变压器和电抗器的雷电冲击和操作冲击试验导则 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
电光源名词 Electric light source vocabulary
电线电缆橡皮绝缘和橡皮护套 第1部分:一般规定 Rubber insulation and sheath of electric cables and wires--Part 1: General
电线电缆橡皮绝缘和橡皮护套 第2部分:65℃橡皮绝缘 Rubber insulation and sheath of electric cables and wires--Part 2: Rubber insulation 65℃
电线电缆橡皮绝缘和橡皮护套 第3部分:70℃橡皮绝缘 Rubber insulation and sheath of electric cables and wires--Part 3: Rubber insulation 70℃
电线电缆橡皮绝缘和橡皮护套 第4部分:65℃一般橡皮护套 Rubber insulation and sheath of electric cables and wires--Part 4: Ordinary duty rubber sheath 65℃
电线电缆橡皮绝缘和橡皮护套 第5部分:65℃一般不延燃橡皮护套 Rubber insulation and sheath of electric cables and wires--Part 5: Ordinary duty flame-retardant rubber sheath 65℃
电线电缆橡皮绝缘和橡皮护套 第6部分:65℃重型橡皮护套 Rubber insulation and sheath of electric cables and wires--Part 6: Heavy duty rubber sheath 65℃
电线电缆橡皮绝缘和橡皮护套 第7部分:65℃重型不延燃橡皮护套 Rubber insulation and sheath of electric cables and wires--Part 7: Heavy duty flame-retardant rubber sheath 65℃
电线电缆橡皮绝缘和橡皮护套 第8部分:90℃橡皮绝缘 Rubber insulation and sheath of electric cables and wires--Part 8: Rubber sheath 90℃
电线电缆橡皮绝缘和橡皮护套 第9部分:85℃一般不延燃橡皮护套 Rubber insulation and sheath of electric cables and wires--Part 9: Ordinary duty flame-retardant rubber sheath 85℃
电线电缆橡皮绝缘和橡皮护套 第10部分: 90℃一般不延燃橡皮护套 Rubber insulation and sheath of electric cables and wires--Part 10: Ordinary duty flame-retardant rubber sheath 90℃
电线电缆橡皮绝缘和橡皮护套 第11部分: 180℃ 橡皮绝缘或护套 Rubber insulation and sheath of electric cables and wires--Part 11: Rubber insulation or sheath 180℃
矿物绝缘油中芳碳含量测定法 (红外光谱分析法) Determination of the aromatic carbon content in mineral insulating oils by infrared spectrum method
矿物绝缘油芳烃含量测定法 Determination of the aromatic hydrocarbon content in mineral insulating oils
玻璃丝包绕组线 第一部分: 一般规定 Glass-fiber covered winding wires--Part 1: General
玻璃丝包绕组线 第二部分: 双玻璃丝包圆线 Glass-fiber covered winding wires--Part 2: Double glass-fiber covered round wires
玻璃丝包绕组线 第三部分: 单玻璃丝包漆包圆线 Glass-fiber covered winding wires--Part 3: Single glass-fiber covered enamelled round wires
玻璃丝包绕组线 第四部分: 双玻璃丝包扁线 Glass-fiber covered winding wires--Part 4: Double glass-fiber covered rectangular wires
玻璃丝包绕组线 第五部分: 玻璃丝包漆包扁线 Glass-fiber covered winding wires--Part 5: Glass-fiber covered enamelled rectangular wires
玻璃丝包绕组线 第六部分: 玻璃丝包薄膜绕包扁线 Glass-fiber covered winding wires--Part 6: Glass-fiber covered film covered rectangular wires
纸包绕组线 第一部分: 一般规定 Paper covered wires--Part 1: General
纸包绕组线 第二部分: 纸包圆线 Paper covered wires--Part 2: Paper covered round wires
纸包绕组线 第三部分: 纸包扁线 Paper covered wires--Part 3: Paper covered rectangular wires
72.5kV及以上气体绝缘金属封闭开关设备 Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above
半导体直接直流变流器 Semiconductor direct d.c. convertors
半导体自换相变流器 Semiconductor self-commutated convertors
绝缘胶粘带工频击穿强度试验方法 Test method for electric strength of insulating adhesive tape at power frequency
压敏胶粘带拉伸性能试验方法 Test method for tensile properties of pressure sensitive adhesive tapes
压敏胶粘带剪切强度试验方法 (胶面对背面) Test method for shear strength of pressure sensitive adhesive tapes (adhesive layer to back side of the tape)
水轮发电机基本技术条件 Fundamental technical specifications for hydro generators
带电铁丝网和电围栏的安装和安全运用 Installation and safe operation of electrically energized entanglements and electric fences
导体的颜色或数字标识 Identification of conductors by colours or numerals
煤矿用电容式发爆器 Capacitor discharge type exploders for coal mines
电力电缆纸 Electric power cable paper
半导电电缆纸 Semiconducting electric cable paper
绝缘纸和纸板 水抽提液电导率的测定 Insulating paper and board--Determination of the electrical conductivity for the water extract
单相串励电动机 试验方法 Test procedure for single phase A.C.series motor
矿用隔爆型移动变电站 Mining flameproof movable substations
高压支柱瓷绝缘子 第1部分: 技术条件 High voltage post insulators of ceramic material Part 1: Technical specification
高压支柱瓷绝缘子 第2部分:尺寸与特性 High voltage post insulators of ceramic material--Part 2: Dimensions and characteristics
铜钨及银钨电触头技术条件 Technical specification for copper-tungsten and silver-tungsten electrical contacts
金属封闭母线 Metal-enclosed bus
量度继电器直流辅助激励量的中断与交流分量 (纹波) Interruptions to and alternating component (ripple) in d.c. auxiliary energizing quantity of measuring relays
电瓷材料 第一部分:定义、分类和性能 Porcelain insulating material for electrical applications--Part 1:Definition,classification and properties
电瓷材料 第二部分:试验方法 Porcelain insulating material for electrical applications--Part 2:Test methods
有关电路和磁路的规定 Conventions concerning electric and magnetic circuits
电子和通信设备用变压器和电感器 测量方法及试验程序 Transformers and inductors for use in electronic and telecommunication equipment Measuring methods and test procedures
半导体键合铝--1%硅细丝 Fine aluminum-1% silicon wire for semiconductor lend-bonding
炭素材料术语 The terms of carbon materials
炭素材料及其制品的包装、标志、储存、运输和质量证明书的一般规定 General rule for packing, marking, storage, transport and quality certificates of carbonaceous material and products
炭素材料抗拉强度测定方法 Method for the determination of tensile strength of carbonaceous materials
石墨材料中温导热系数测定方法 Method for the determination of thermal conductivity of graphite materials at median temperature
半导体器件键合金丝 Gold wire for semiconductor devices lead bonding
交流接触器节电器 Eenergy saver for AC contactors
原电池总则 Primary batteries:General
六氟化硫电气设备中气体管理和检测导则 The guide for processing and measuring SF6 gas in power apparatus
三相异步电动机负载率现场测试方法 Test procedure on working site for measuring the loading percentage of a three phase induction motor
绝缘纺 Silk fabric for electric insulation
铁路信号直流无极继电器 通用技术条件 General technical requirements for railway signal DC neutral relays
严酷条件下户外场所电气设施 术语和定义 Electrical installations for outdoor sites under heavy conditions--Terms and definitions
严酷条件下户外场所电气设施 一般防护要求 Electrical installations for outdoor sites under heavy conditions--General protection requirements
户外严酷条件下电气装置 设备及附件的一般要求 Electrical installations for outdoor sites under heavy conditions - General requirements for eguipment and ancillaries
户外严酷条件下电气装置 装置要求 Electrical installations for outdoor sites under heavy conditions - Repuirements for the installation
户外严酷条件下电气装置操作要求 Electrical installations for outdoor sites under heavy conditions--Operating requirements
交流330kV 及以下油纸绝缘自容式充油电缆及附件 一般规定 Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--General
交流330kV 及以下油纸绝缘自容式充油电缆及附件 油纸绝缘自容式充油电缆 Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Oil filled paper insulated cables
交流330kV 及以下油纸绝缘自容式充油电缆及附件 终端 Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Sealing ends
交流330kV及以下油纸绝缘自容式充油电缆及附件 接头 Oil-filled paper-insulated cables and accessories for alternating voltages up to and including 330kV--Joints
交流330kV 及以下油纸绝缘自容式充油电缆及附件 压力供油箱 Oil-filled paper-insulated cables and accessories for alternating voltages up to and inclnding 330kV--Pressure tanks
电缆导体压缩和机械连接接头试验方法 总则 Test methods for compression and mechanical connectors for conductors of power cables--General
电缆导体压缩和机械连接接头试验方法 直流电阻试验方法 Test methods for compression and mechanical connectors for conducters of power cables--Test methods for measuremcnt of D.C resistance of connectors
电缆导体压缩和机械连接接头试验方法 短路试验方法 Test methods for compression and mechanical connectors for conductors of power cables--Method of short-circuit testing
电缆导体压缩和机械连接接头试验方法 热循环试验方法 Test methods for compression and mechanical connectors for conductors of power cables--Method of heat cycle testing
电缆导体压缩和机械连接接头试验方法 抗拉强度试验方法 Test methods for compression and mechanical connectors for conductors of power cables--Method of tensile strength testing
塑料绝缘控制电缆 一般规定 Plastic insulated control cables--General
塑料绝缘控制电缆 聚氯乙烯绝缘和护套控制电缆 Plastic insulated control cables--Polyvinyl chloride insulated and sheathed control cables
额定电压0.6/1kV及以下船用电力电缆和电线 一般规定 Shipboard power cables and wires of rated voltages up to and including 0.6/1 kV--General
船用控制电缆 一般规定 Shipboard control cables--General
船用对称式通信电缆 一般规定 Shipboard cables with symmetrical conductors--General
船用射频电缆 一般规定 Shipboard radio-frequency cables--General
小型熔断器 第1部分: 小型熔断器定义和小型熔断体通用要求 Miniature fuses Part 1: Definitions for miniature fuses and general requirement for miniature fuse-links
小型熔断器 第2部分: 管状熔断体 Miniature fuses Part 2: Cartridge fuse-links
小型熔断器 第3部分; 超小型熔断体 Miniature fuses Part 3: Sub-miniature fuse-links
小型熔断器 第6部分: 小型管状熔断体的熔断器座 Miniature fuses--Part 6: Fuse-holders for miniature cartridge fuse-links
彩色广播电视接收机用回扫变压器总技术条件 General specification of flyback transformers for color broadcasting TV receivers
镉镍碱性蓄电池 Nickel-cadmium alkaline secondary cells
镉镍碱性蓄电池组 Nickel-cadmium alkaline secondary batteries
设备维修性导则 第一部分: 维修性导言 Guide on maintainability of equipment--Part 1: Introduction to maintainability
设备维修性导则 第二部分: 规范与合同中的维修性要求 Guide on maintainability of equipment--Part 2: Maintainability requirement in specification and contracts
设备维修性导则 第三部分: 维修性大纲 Guide on maintainability of equipment--Part 3: maintainability programme
设备维修性导则 第五部分: 设计阶段的维修性研究 Guide on maintainability of equipment--Part 5: Maintainability studies during the design phase
设备维修性导则 第六部分: 维修性检验 Guide on maintainability of equipment--Part 6: Maintainability verification
设备维修性导则 第七部分: 维修性数据的收集、分析与表示 Guide on maintainability of equipment--Part 7: Collection, analysis and presentation of data related to maintainability
设备维修性导则 第四部分: 诊断测试 Guide on maintainability of equipment--Part 4: Diagnostic testing
设备维修性导则 第九部分: 维修性评价的统计方法 Guide on maintainability of equipment Part 9: Statistical methods in maintainability evaluation
民用台灯通用技术条件 General technical requirements of table lamp for civil use
微波固体电介质材料介电特性测试方法 同轴终端短路法 Test method for the determination of the dielectric properties of solid dielectric materials at microwave frequencies--The method of coaxial terminal short circuit
毫米波频段固体电介质材料介电特性测试方法 准光腔法 Test method for complex permittivity of solid dielectric materials at millimeter wave frequencies using "Quasi-Optic Cavity" technique
带状电缆连接器总规范 General specification of flat cable connector
通信用电感器和变压器磁芯 第一部分: 总规范 (可供认证用) Inductor and transformer cores for telecommunications--Part 1: Generic specification
通信用电感器和变压器磁芯 第二部分: 分规范 电感器用磁性氧化物磁芯 (可供认证用) Inductor and transformer cores for telecommunications--Part 2: sectional specification: Magnetic oxide cores for inductor applications
通信用电感器和变压器磁芯 第二部分: 空白详细规范 电感器用磁性氧化物磁芯 评定水平 A (可供认证用) Inductor and transformer cores for telecommunications--Part 2: Blank detail specification: Magnetic oxide cores for inductor applications--Assessment level A
通信用电感器和变压器磁芯 第三部分: 分规范 宽带变压器用磁性氧化物磁芯 (可供认证用) Inductor and transformer cores for telecommunications--Part 3: Sectional specification:Magnetic oxide cores for broad-band transformers
通信用电感器和变压器磁芯 第三部分: 空白详细规范 宽带变压器用磁性氧化物磁芯 评定水平 A和B (可供认证用) Inductor and transformer cores for telecommunications--Part 3: Blank detail specification: Magnetic oxide cores for broad-band transformers--Assessment levels A and B
通信用电感器和变压器磁芯 第四部分: 分规范 电源变压器和扼流圈用磁性氧化物磁芯 (可供认证用) Inductor and transformer cores for telecommunications--Part 4: sectional specification: Magnetic oxide cores for transformers and chokes for power applications
通信用电感器和变压器磁芯 第四部分: 空白详细规范 电源变压器和扼流圈用磁性氧化物磁芯 评定水平 A(可供认证用) Inductor and transformer cores for telecommunications--Part 4: Blank detail specification: Magnetic oxide cores for transformers and chokes for power applications--Assessment level A
磁性氧化物制成的罐形磁芯及其附件的尺寸 Dimensions of pot-cores made of magnetic oxides and associated parts
通信用电感器和变压器磁芯测量方法 Measuring methods of cores for inductors and transformers for telecommunications
微波频率应用的旋磁材料性能测试方法 Measuring methods for properties of gyromagnetic materials intended for application at microwave frequencies
磁性氧化物零件外形缺陷极限规范的指南 Guide to the specification of limits for physical imperfections of parts made from magnetic oxides
天线棒测量方法 Measuring methods for aerial rods
磁性氧化物制成的圆天线棒和扁天线棒 Aerial rods and slabs made of magnetic oxides
单相异步电动机试验方法 Test procedure for single phase induction motor
家用及类似用途的熔断器 Fuses for domestic and similar purposes
热熔断体的要求和应用导则 Thermal-Links-Requirements and application guide
炭素材料透气度试验方法 Test method for the permeability of carbon materials
固体绝缘材料绝缘电阻的试验方法 Methods of test for the determination of the insulation resistance of solid insulating materials
绝缘液体在电应力和电离作用下的析气性测定方法 Gassing of insulating liquids under electrical stress and ionization
轴中心高为56mm及以上电机的机械振动 振动的测量、评定及限值 Mechanical vibration of certain machines with shaft heights 56mm and higher--Measurement,evaluation and limits of vibration
旋转电机噪声测定方法及限值 噪声工程测定方法 Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise
旋转电机噪声测定方法及限值 噪声简易测定方法 Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Survey method for the measurement of airborne noise
旋转电机噪声测定方法及限值 噪声限值 Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Noise limits
锂电池最大外形尺寸和容量系列 Maximum outside size and capacity series for lithium battery
电极糊 Electrode paste
磁性氧化物制成的螺纹磁芯的尺寸 Dimensions of screw cores made of ferromagnetic oxides
云母纸 Mica paper
电工控制设备造型设计导则 The design guide of the outline and structure for the electric control equipment
干式电力变压器技术参数和要求 Specification and technical requirements for dry-type power transformers
电抗器 Reactors
有载分接开关 On-load tap-changers
电气继电器 第7部分: 有或无机电继电器测试程序 Electrical relays--Part 7: Test and measurement procedures for electromechanical all-or-nothing relays
电气传动控制设备基本试验方法 Basic test method for electric-driving control gear assemblies
半导体电力变流器与电网互相干扰及其防护方法导则 Guide for evaluation of interference effects and compatibility technology between semiconductor convertors and power supply system
电力变压器 绝缘水平和绝缘试验外绝缘的空气间隙 Power transformers--Insulation levels and dielectric tests--External clearances in air
旋转变压器通用技术条件 Resolver, electrical ,general specification for
永磁式直流力矩电动机通用技术条件 Permanent magnet direct current torgue motors, general specification for
磁阻式步进电动机通用技术条件 Variable reluctance stepping motor, general specification for
多极和双通道感应移相器通用技术条件 Multipolar and two-speed induction phase shifters, general specification for
多极和双通道旋转变压器通用技术条件 Multipolar and two-speed electrical resolvers, general specification for
控制电机型号命名方法 Type designation for control motor
地铁直流牵引供电系统 D.C.traction power supply system for subway
有溶剂绝缘漆检验、包装、标志、贮存和运输通用规则 The general rules of insulating varnishes containing solvent for examing, packing, marking, storage and transportation
固体绝缘材料在试验前和试验时采用的标准条件 Standard conditions for use prior to and during the testing of solid insulating materials
固体绝缘材料在高温下绝缘电阻和体积电阻率的试验方法 Method of test for insulation resistance and volume resistivity of insulating materials at elevated temperature
测定因绝缘材料而引起的电解腐蚀的试验方法 Test methods for determining electrolytic corrosion with insulating materials
有载分接开关应用导则 Application guide for on-load tap-changers
中小型同步电机励磁系统基本技术要求 Fundamental requirements of excitation systems for medium and small synchronous machines
电工电子产品环境参数测量方法 振动 Method of measuring of environmental parameters for electric and electronic products?Vibration
电工电子产品环境参数测量方法 盐雾 Method of the measuring environmental parameters for electric and electronic products--Salt mist
电工电子产品环境参数测量方法 振动数据处理和归纳 Methods of measuring environmental parameters for electric and electronic products - Treatment and induction for the vibration data
普通照明灯泡 General service incandescent lamps
普通照明用管形荧光灯 Tabular fluorescent lamps for general lighting service
可膨胀石墨 Expansible graphite
小型风力发电机技术条件 Specification for small wind generators
热带微电机基本技术条件 General requirements for tropical electrical micro-machine
工矿电机车重量测定方法 Method of weight measurement for industrial and mining electric locomotive
机床电器可靠性通则 General rules of reliability for machine tool electrical components
家用及类似场所用过电流保护断路器 Circuit-breakers for overcurrent protection for household and similar installation
电器附件、控制器和保护器术语 Electrotechnical terminology of electrical , accessories, controls and protectors
煤矿防爆特殊型电源装置用铅酸蓄电池 产品品种与规格 Lead acid batteries for special type explosion proof power unit in coal mine - Product types and specification
家用和类似用途照明开关 Household and similar use light switches
碱性二次电池和电池组 圆柱密封镉镍可充单体电池 Alkaline secondary cells and batteries--Sealed nickel-cadmium cylindrical rechargeable single cells
塑料绝缘和橡皮绝缘电话软线 一般规定 Plastic or rubber insulated telephone cords - General
塑料绝缘和橡皮绝缘电话软线 聚氯乙烯绝缘电话软线 Plastic or rubber insulated telephone cords - Polyvinyl chloride insulated telephone cords
塑料绝缘和橡皮绝缘电话软线 聚丙烯绝缘电话软线 Plastic or rubber insulated telephone cords - Polypropylene insulated telephone cords
塑料绝缘和橡皮绝缘电话软线 橡皮绝缘电话软线 Plastic or rubber insulated telephone cords - Rubber insulated telephone cords
额定电压110kV 铜芯、铝芯交联聚乙烯绝缘电力电缆 Copper and aluminium conductor extruded XLPE insulated power cables with rated voltage 110kV
丝包铜绕组线 一般规定 Copper winding wires with silk covering?General
丝包铜绕组线 丝包单线 Copper winding wires with silk covering--Single wire with silk covering
丝包铜绕组线 丝包束线 Copper winding wires with silk covering?Bunched wires with silk covering
镀镍圆铜线 Nickel coated round copper wire
测定固体电气绝缘材料暴露在引燃源后燃烧性能的试验方法 Test methods for the determination of the flammability of solid electrical insulating materials when exposed to an igniting source
电气绝缘的耐热性评定和分级 Thermal evaluation and classification of electrical insulation
高压开关设备和控制设备标准的共同技术要求 Common specifications for high-voltage switchgear and controlgear standards
高压开关设备六氟化硫气体密封试验方法 Test guide of SF6 gas tightness for high-voltage switchgear
确定电气绝缘材料耐热性的导则 制订老化试验方法和评价试验结果的总规程 Guide for the determination of thermal endurance properties of electrical insulating materials?General guidelines for ageing procedures and evaluation of test results
确定电气绝缘材料耐热性的导则 第2部分: 试验判断标准的选择 Guide for the determination of thermal endurance properties of electrical insulating materials Part 2: Choice of test criteria
确定电气绝缘材料耐热性的导则 第4部分: 老化烘箱 单室烘箱 Guide for the determination of thermal endurance properties of electrical insulating materials-Part 4: Ageing ovens--Single-chamber ovens
有溶剂绝缘漆规范 单项材料规范 对热固化浸渍漆的要求 Specification for insulating varnishes containing solvent-Specifications for individual materials-Requirements for hot curing impregnating varnishes
测定浸渍剂对漆包线基材粘结强度的试验方法 Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate
交流牵引线路用棒形瓷绝缘子 Rod porcelain insulators for a.c.system traction lines
交流无间隙金属氧化物避雷器 Metal oxide surge arresters without gaps for a.c.systems
硅片径向电阻率变化的测量方法 Standard method for measuring radial resistivity variation on silicon slices
液封直拉法砷化镓单晶及切割片 Liquid encapsulated czochralski-grown gallium arsenide single crystals and As-cut slices
绝缘油在电场和电离作用下析气性测定法 Insulating oils - Determination of gassing under electrical stress and ionization
控制微电机用齿轮减速器系列 Reduction gearhead series of electrical micro-machine for automatic control system
电气继电器 第21部分: 量度继电器和保护装置的振动、冲击、碰撞和地震试验 第1篇: 振动试验(正弦) Electrical relays--Part 21: Vibration,shock,bump and seismic tests on measuring relays and protection equipment Section one: Vibration tests(sinusoidal)
锑化铟单晶位错蚀坑的腐蚀显示及测量方法 Standard method for showing and measuring dislocation etch pits in indium antimonide single cryatal
锑化铟单晶电阻率及霍耳系数的测试方法 Test method for resistivity and hall coefficient indium antimonide single crystals
聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第1部分: 一般试验和测量方法 Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 1: General test and measuring methods
聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第2部分: 局用电缆(对线组或三线组或四线组或五线组的) Low-frequency telecommunication cable and wires with PVC insulation and PVC sheath--Part 2: Cables in pairs,triples,quads and quintuples for inside installation
聚氯乙烯绝缘聚氯乙烯护套低频通信电缆电线 第3部分: 终端电缆(对线组的) Low-frequency telecommunication cables and wires with PVC insulation and PVC sheath--Part 3: Terminating cables in pairs
磁性氧化物制成的管、针、柱磁芯的尺寸 Dimensions of tubes, pins and rods of ferromagnetic oxides
铁氧体交流消音头磁芯 Ferrite cores for AC erasing heads
软磁铁氧体材料成品、半成品化学分析方法 Chemical analysis methods for products and semifinished products made of soft ferrite materials
广播接收机天线用铁氧体磁芯分规范 (可供认证用) Ferrite cores used in broadcast receiver aerials sectional specification
广播接收机天线用铁氧体磁芯空白详细规范 评定水平 A (可供认证用) Ferrite cores used in broadcast recever aerials blank detail specification - Assessment level A
通信和电子设备用变压器和电感器铁心片 Laminations for transformers and inductors for use in telecommunication and electronic equipment
彩色显示管用Y30-R1荧光粉 Phosphor Y30-R1 for color display tubes
工业用插头插座和耦合器 第1部分: 通用要求 Plugs,socket-outlets and couplers for industrial purposes--Part 1: General requirements
工业用插头插座和耦合器 第2部分: 带插销和插套的电器附件的尺寸互换性要求 Plugs,socket-outlets and couplers for industrial purposes--Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
电站电气部分集中控制装置通用技术条件 General specification of central control equipments for electrical parts in power stations and substations
矿用一般型电气设备 Mining electrical apparatus for non hazardous area
小功率电动机的安全要求 Safety requirements of small power motors
热带型旋转电机环境技术要求 Enviromental technical requirements of rotating electric machines for tropical use
可燃性粉尘环境用电气设备 第1部分:用外壳和限制表面温度保护的电气设备 第1节 电气设备的技术要求 Electrical apparatus for use in the presence of combustible dust--Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation-Specification for apparatus
三相异步电动机经济运行 Three-phase induction motor energy-saving operation
电工电子设备按电击防护分类 第2部分: 对电击防护要求的导则 Classification of electrical and electronic equipment with regard to protection against electric shock--Part 2: Guidelines to requirements for protection against electric shock
额定电压1 kV及以下架空绝缘电缆 Aerial insulated cables of rated voltages up to and including 1 kV
交流额定电压3 kV及以下铁路机车车辆用电缆(电线) 一般规定 Insulated cables (wires) for railway vehicles of rated voltages up to and including 3 kV - General
加抑制剂矿物绝缘油氧化安定性测定法 Inhibited mineral insulating oils - Determination of oxidation stability
碳膜电阻器用陶瓷基体 Ceramic base body using in carbon film resistor
微波介质基片复介电常数带状线测试方法 Stripline test method for complex permittivity of microwave dielectric substrates
电容器纸工频击穿电压测定法 Determination of electric strength at power frequence for capacitor paper
电容器纸导电点测定法 Determination of conducting path for capacitor paper
电线电缆燃烧试验方法 第一部分: 总则 Test method on electric wires or cables under fire conditions - Part 1: General
电线电缆燃烧试验方法 第三部分: 单根电线电缆水平燃烧试验方法 Test method on electric wires or cables under fire conditions - Part 3: Test on a single horitontal insulated wire or cable
电线电缆燃烧试验方法 第四部分: 单根电线电缆倾斜燃烧试验方法 Test method on electric wires or cables under fire conditions - Part 4: Test on a single slanting insulated wire or cable
电线电缆燃烧试验方法 第六部分: 电线电缆耐火特性试验方法 Test method on electric wires or cables under fire conditions - Part 6: Test on fire-resisting characteristics of wire or cable
同步电动机半导体励磁装置总技术条件 General specification for excitaetion assembly with semiconductor for synchronous motor
交流电动机半导体变频调速装置总技术条件 General specification for speed control assembly with semiconductor adjustable freguency for A.C.motor
半导体变流串级调速装置总技术条件 General specification for cascade speed control assembly with semiconductor converter
额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆 第一部分: 一般规定 Copper or aluminium conductor extruded plastic insulated power cables with rated voltages up to 35kV - Part 1: General
额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆 第二部分: 聚氯乙烯绝缘电力电缆 Copper or aluminium conductor extruded plastic insulated power cables with rated voltages up to 35kV - Part2: Polyvinyl chloride insulated power cables
额定电压35kV及以下铜芯、铝芯塑料绝缘电力电缆 第三部分: 交联聚乙烯绝缘电力电缆 Copper or aluminium conductor extruded plastic insulated power cables with rated voltages up to 35kV - Part3: Cross-linked polyethylene insulated power cables
锌银碱性蓄电池总规范 General specification for silver-zinc rechargeable cells
铁镍碱性蓄电池总规范 General specification for alkaline nickel-iron rechar geable batteries
耐污型户外棒形支柱瓷绝缘子 Outdoor antipollution-type solid-core post insulators of ceramic material
自动化柴油发电机组通用技术条件 Automatic diesel generating sets for general specification
永磁铁氧体磁体总规范 (可供认证用) Generic specification for permanent ferrite magnets
微电机用永磁铁氧体磁体分规范 (可供认证用) Sectional specification for permanent ferrite magnets for use in micromotors
磁性氧化物或铁粉制成的轴向引线磁芯 Axial lead cores made of magnetic oxides or iron powder
移动设备用卷绕电缆载流量计算导则 The calculation guide of the drum (reeling) cable's current rating
电容器纸 Capacitor tissue paper
银石墨电触头技术条件 Technical specification for silver-graphite electricalcontacts
高压穿墙瓷套管技术条件 High-voltage ceramic wall bushings - Technical specifi cations
高压穿墙瓷套管 尺寸与特性 High-voltage ceramic wall bushings - Dimensions and characteristics
硅单晶 Monocrystalline silicon
硅多晶 Polycrystalline silicon
硅单晶抛光片 Monocrystalline silicon polished wafers
硅单晶切割片和研磨片 Monocrystalline silicon ascut slices and lapped slices
电工软铜绞线 第一部分: 一般规定 Flexible copper stranded conductors for electrical purposes - Part 1: General
电工软铜绞线 第二部分: 软铜绞线 Flexible copper stranded conductors for electrical purposes - Part 2: Flexible copper stranded conductors
电工软铜绞线 第三部分: 软铜天线 Flexible copper stranded conductors for electrical purposes - Part 3: Flexible copper wire for antenna
电工软铜绞线 第四部分: 铜电刷线 Flexible copper stranded conductors for electrical purposes - Part 4: Copper brush wires
电力牵引用接触线 第一部分: 一般规定 Trolley and contact wires for electric traction - Part 1: General
电力牵引用接触线 第二部分: 铜接触线 Trolley and contact wires for electric traction - Part 2: Copper trolley and contact wires
电力牵引用接触线 第三部分: 钢、铝复合接触线 Trolley and contact wires for electric traction - Part 3: Aluminium and steel composite trolley and contact wires
电力牵引用接触线 第四部分: 钢、铝及铝合金复合接触线 Trolley and contact wires for electric traction - Part 4: Aluminium-steel and aluminium alloy composite trolley wires
电力牵引用接触线 第五部分: 铝合金接触线 Trolley and contact wires for electric traction - Part 5: Aluminium alloy trolley and contact wires
矿用橡套软电缆 第一部分: 一般规定 Flexible rubber-sheathed cables for mining purposes - Part 1: General
矿用橡套软电缆 第二部分: 额定电压0.66/1.14kV 及以下采煤机软电缆 Flexible rubber-sheathed cables for mining purposes - Part 2: Flexible coalcutter cables for rated voltages up to 0.66/1.14kV
矿用橡套软电缆 第三部分: 额定电压0.66/1.14kV 采煤机屏蔽监视加强型软电缆 Flexible rubber-sheathed cables for mining purposes - Part 3: Trailing coalcutter cables with monitoring core and semiconducting screens for rated voltage of 0.66/1.14kV
矿用橡套软电缆 第四部分: 额定电压0.66/1.14kV 采煤机金属屏蔽软电线 Flexible rubber-sheathed cables for mining purposes - Part 4: Flexible coalcutter cables with indivdual metallic screens for rated voltage of 0.66/1.14kV
矿用橡套软电缆 第五部分: 额定电压0.66/1.14kV 及以下移动橡套软电缆 Flexible rubber-sheathed cables for mining purposes - Part 5: Flexible cables for rated voltage up to 0.66/1.14kV
矿用橡套软电缆 第六部分: 额定电压3.6/6kV 屏蔽监视型软电缆 Flexible rubber-sheathed cables for mining purposes - Part 6: Flexible cables with monitoring core and semiconducting screens for rated voltage of 3.6/6kV
矿用橡套软电缆 第七部分: 额定电压3.6/6kV 屏蔽橡套软电缆 Flexible rubber-sheathed cables for mining purposes - Part 7: Flexible cables with screens for rated voltage of 3.6/6kV
矿用橡套软电缆 第八部分: 额定电压0.3/0.5kV 矿用电钻电缆 Flexible rubber-sheathed cables for mining purposes - Part 8: Flexible drill cables for rated voltage of 0.3/0.5kV
矿用橡套软电缆 第九部分: 矿用移动轻型橡套软电缆 Flexible rubber-sheathed cables for mining purposes - Part 9: Flexible light-duty cables
矿用橡套软电缆 第十部分: 矿工帽灯电线 Flexible rubber-sheathed cables for mining purposes - Part 10: Miner's cap lamp cords
换向器和集电环的尺寸 Dimensions for commutators and sliprings
交流电梯电动机通用技术条件 General specification for a.c. lift motors
额定电压 35kV 及以下铜芯、铝芯纸绝缘电力电缆 第一部分: 一般规定 Copper or aluminium conductor paper-insulated power cables with rated voltages up to 35kV - Part 1: General
额定电压 35kV 及以下铜芯、铝芯纸绝缘电力电缆 第二部分: 不滴流油浸纸绝缘金属套电力电缆 Copper or aluminium conductor paper-insulated power cables with rated voltages up to 35kV - Part 2: Non-draining oil impregnated paper-insulated matal-sheathed power cables
额定电压35 kV 及以下铜芯、铝芯纸绝缘电力电缆 第三部分: 粘性油浸纸绝缘金属套电力电缆 Copper or aluminium conductor paper-insulated power cables with rated voltages up to 35kV - Part 3: Resin oil impregneted paper-insulated metal-sheathed power cables
旋转电机装入式热保护 旋转电机的保护规则 Built-in thermal protection for rotating electrical machines - Rules for protection of rotating electrical machines
油纸电容式穿墙套管型式和尺寸 Oil impregnated paper capacitance graded wall bushings - Types and dimensions
油纸电容式变压器套管型式和尺寸 Oil impregnated paper capacitance graded transformer bushings - Types and dimensions
隔离变压器和安全隔离变压器 技术要求 Isolating transformers and safety isolating transformers--Requirements
额定电压750V及以下矿物绝缘电缆及终端 第一部分: 一般规定 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V?Part 1: General
额定电压750V及以下矿物绝缘电缆及终端 第二部分: 铜芯铜护套矿物绝缘电缆 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V?Part 2: Mineral insulated cables with copper conductors and copper sheath
额定电压750V及以下矿物绝缘电缆及终端 第三部分: 铜芯铜护套矿物绝缘电缆终端 Mineral insulated cables and their terminations with a rated voltage not exceeding 750V - Part 3: Terminations formineral insulated cables with copper conductors and copper sheath
自整角机通用技术条件 Synchros General specification for
磁滞同步电动机通用技术条件 Hysteresis synchronous motors - General specification for
家用和类似用途低压电路用的连接器件 第1部分:通用要求 Connecting devices for low voltage circuits for household and similar purposes--Part 1: General requirements
家用和类似用途低压电路用的连接器件 第2部分: 作为独立部件的带螺纹型夹紧件的连接器件的特殊要求 Connecting devices for low voltage circuits for household and similar purposes Part 2: Particular requirements for connecting devices as separate entities with screw-type clamping units
家用和类似用途低压电路用的连接器件 第2部分: 作为独立单元的带无螺纹型夹紧件的连接器件的特殊要求 Connecting devices for low voltage circuits for household and similar purposes Part 2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
家用和类似用途低压电路用的连接器件 第2部分: 作为独立单元的带剌穿绝缘型夹紧件的连接器件的特殊要求 Connecting devices for low voltage circuits for household and similar purposes Part 2: Particular requirements for connecting devices as separate entities with insulation piercing clamping units
家用和类似用途低压电路用的连接器件 第2部分: 扭接式连接器件的特殊要求 Connecitng devices for low-voltage circuits for household and similar purposes Part 2: Particular requirements for twist-on connecting devices
家用和类似用途低压电路用的连接器件 第2部分: 端子或连接器件用(端接和/或分接)接线盒的特殊要求 Connecting devices for low-voltage circuits for household and similar purposes Part 2: Particular requirements for connecting boxes (junction and/or tapping)for terminals or connecting devices
旋转电机装入式热保护 热保护器通用规则 Built-in thermal protection for rotating electrical machines - General rules for thermal protectors
高压钠灯泡 High pressure sodium lamps
管形荧光灯座和启动器座型式和尺寸 Typs and dimensions of lampholders for tubular fluorescent lamps and starterholders
管形荧光灯座和启动器座检验量规 Gauges of lampholders for tubular fluorescent lamps and starterholders
铁路客车用铅酸蓄电池 Lead-acid batteries used for passenger trains
固定型防酸式铅酸蓄电池技术条件 Stationary acidapray-proof lead-acid batteries Technical conditions
固定型防酸式铅酸蓄电池 规格及尺寸 Stationary acidspray-proof lead-acid batteries - Capacity specifications and size
电气安装用导管的技术要求 通用要求 Specification for conduits for electrical installations - General reguirements
电子材料晶片参考面长度测量方法 Test method for measuring flat length on slices of electronic materials
硅片参考面结晶学取向X射线测量方法 Method for measuring crystallographic orientation of flats on single crystal silicon slices and wafers by X-ray techniques
掺硼掺磷硅单晶电阻率与掺杂剂浓度换算规程 Practice for conversion between resistivity and dopant density for boron-doped and phosphorus-doped silicon
电工技术用字母符号 旋转电机量的符号 Letter symbols to be used in electrical technology - Symbols for quantities to be used for rotating electrical machines
合金内氧化法银金属氧化物电触头技术条件 Technical specification for silver-metaloxide electrical contacts by alloy internal oxidation method
半导体电力变流器 电气试验方法 Power semiconductor converters - Electrical test methods
高压钠灯泡特性的测试方法 Test method for H.P.S.Lamps
不透性石墨材料力学性能试验方法总则 General rules for test methods of mechanical properties of impermeable graphite materials
不透性石墨材料抗弯强度试验方法 Test method for flexure strength of impermeable graphite materials
不透性石墨材料抗压强度试验方法 Test method for compressive strength of impermeable graphite meterials
不透性石墨材料冲击试验方法 Method for impact testing of impermeable graphite materials
高压直流输电术语 Terminology for high-voltage direct current transmission
电力变压器应用导则 Application guide for power transformers
封闭式制冷压缩机用三相异步电动机 通用技术条件 Three phase asynchronous motors for hermetic refrigeration compressors - General specifications
封闭式制冷压缩机用电动机绝缘耐氟试验方法 Electric motors for hermetic refrigeration compressors - Test methods of insulation resistance to freon
电气颜色标志的代号 Code for designation of colours for electricity
电子类家用电器用电动机通用技术条件 Miniature motors for electronic household appliances, general specification for
低压熔断器 基本要求 General requirements for low-voltage fuses
低压熔断器 专职人员使用的熔断器的补充要求 Low-voltage fuses - Supplementary requirements for fuses for use by authorized persons
低压熔断器 第3部分: 非熟练人员使用的熔断器的补充要求(主要用于家用和类似用途的熔断器) Low-voltage fuses--Part 3: Supplementary requirements for fuses for use by unskilled person (fuses for mainly for household and similar apllication)
低压熔断器 半导体器件保护用熔断体的补充要求 Low-voltage fuses - Supplementary requirements for fuse-links for the protection of semiconductor devices
低压熔断器 第3部分: 非熟练人员使用的熔断器的补充要求(主要用于家用和类似用途的熔断器) 标准化熔断器示例 Low-voltage fuses--Part 3: Supplementary requirements for fuses for use by unskilled person (fuses for mainly for household and similar apllication)--Examples of standardized fuses
高压开关设备抗地震性能试验 Anti-seismic characteristic test for high-voltage switchgear
电子调光设备通用技术条件 Generic specification for electronic lighting control equipments
旋转电机装入式热保护 热保护系统用热检测器和控制单元 Built-in thermal protection for rotating electrical machines - Thermal detectors and control units used in thermal protection systems
高压开关设备严重冰冻条件下的操作试验 Operating tests under severe ice conditions for high-voltage switchgear
永磁式直流测速发电机 通用技术条件 Permanent magnet D.C. tachogenerator--General specification
远动终端通用技术条件 General specification for remote terminal unit
地区电网数据采集与监控系统通用技术条件 General specification for SCADA system to the district power network
单片电工钢片带磁性能测量方法 Magnetic sheet and strip--Methods of measurement of magnetic properties by means of a single sheet tester
超导材料术语 Terms for superconducting materials
晶片承载器 Wafer carriers
电子陶瓷件表面粗糙度 Surface roughness for electronic ceramic parts
蓝宝石单晶抛光衬底片 Polished monocrystalline sapphire substrates
聚烯烃绝缘聚烯烃护套市内通信电缆 第1部分:一般规定 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 1: General
聚烯烃绝缘聚烯烃护套市内通信电缆 第2部分:铜芯、实心或泡沫(带皮泡沫)聚烯烃绝缘、非填充式、挡潮层聚乙烯护套市内通信电缆 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 2 Unfilled, moisture barrier polyethylene sheathed local telecommunication cables with copper conductors and solid or cellular polyolefin insulation
聚烯烃绝缘聚烯烃护套市内通信电缆 第3部分:铜芯实心或泡沫(带皮泡沫)聚烯烃绝缘、填充式、挡潮层聚乙烯护套市内通信电缆 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 3: Filled,moisture barrier polyethylene sheathed local telecommunication cables with copper conductors and solid or cellular polyolefin insulation
聚烯烃绝缘聚烯烃护套市内通信电缆 第4部分:铜芯实心或b聚烯烃绝缘(非填充)自承式、挡潮层聚乙烯护套市内通信电缆 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 4:Unfilled,moisture barrier polyethylene sheathed local telecommunication cables with copper conductors,solid polyolefin insulation and integral suspension strand
聚烯烃绝缘聚烯烃护套市内通信电缆 第5部分:铜芯、实心或泡沫(带皮泡沫)聚烯烃绝缘、隔离式(内屏蔽)、挡潮层聚乙烯护套市内通信电缆 Local telecommunication cables with polyolefin insulation and polyolefin sheath--Part 5:Moisture barrier polyethylene sheathed and seperated(inner-screened)local telecommunication cables with copper conductors and solid or cellular polyolefin insulat
器具开关基本试验方法 Basic testing methods of switches for appliance
电气绝缘用聚酯薄膜 Polyester film used as electrical insulation
漏电保护器安装和运行 Installation and operation of residual current operated protective devices
大型三相异步电动机基本系列技术条件 Technical requirements for the fundamental series of 3-phase large asynchronous motors
无直流励磁绕组同步电动机试验方法 Test procedure for non'direct current excitation winding synchronous motor
灯具用电源导轨系统 Electrical supply track systems for luminaires
通信和电子设备用变压器和电感器外形尺寸 第一部分: 采用 YEI-1铁心片的变压器和电感器 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment--Part 1: Transformers and inductors using YEI-1 laminations
通信和电子设备用变压器和电感器外形尺寸 第2部分: 采用Yex-2系列铁心片印制板安装式 变压器和电感器 Outline dimemsions of transformers and inductors for use in telecommunication and electronic equipment--Part 2; Transformers and inductors using Yex-2 laminations for printed wiring board mounting
通信和电子设备用变压器和电感器外形尺寸 第3部分: 使用YUI-1系列铁心片的变压器和电感器 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment--Part 3: Transformers and inductors using YUI-1 laminations
硅-蓝宝石外延片 Silicon on sapphire epitaxial wafers
管形荧光灯镇流器性能要求 Ballasts for tubular fluorescent lamps--Performance requirements
放电灯(管形荧光灯除外)用镇流器的一般要求和安全要求 Ballasts for discharge lamps (excluding tubular fluorescent lamps) general and safety requirements
量度继电器和保护装置 Measuring relays and protection equipment
低压开关设备和控制设备 总则 Low-voltage switchgear and controlgear General rules
低压开关设备和控制设备 低压断路器 Low-voltage switchgear and controlgear Low-voltage circuit breakers
低压开关设备和控制设备 低压开关、隔离器、隔离开关及熔断器组合电器 Low-voltage switchgear and controlgear--Low-voltage switches, disconnectors, switch-disconnectors and fuse-combination units
低压开关设备和控制设备 低压机电式接触器和电动机起动器 Low-voltage switchgear and controlgear--Low-voltage electromechanical contactors and motor starters
低压开关设备和控制设备 第5-1部分 控制电路电器和开关元件 机电式控制电路电器 Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching element Electromechanical control circuit devices
低压开关设备和控制设备 接触器和电动机起动器 第2部分: 交流半导体电动机控制器和起动器 Low-voltage switchgear and controlgear Contactors and motor-starters Section 2: AC Semiconductor motor controllers and starters
低压开关设备和控制设备辅助电器 第1部分: 铜导体的接线端子排 low-voltage switchgear and controlgear Ancillary equipment Section 1-Terminal blocks for copper conductors
低压开关设备和控制设备辅助电器 第2部分: 铜导体的保护导体接线端子排 Low-voltage switchgear and controlgear Ancillary equipment Section 2: Protective conductor terminal blocks for copper conductors
低压开关设备和控制设备 多功能电器(设备) 第2部分: 控制与保护开关电器(设备) Low-voltage switchgear and controlgear Multiple function equipment Section 2: Control and protective switching devices(or equipment)(CPS)
低压开关设备和控制设备 控制电路电器和开关元件 第2部分 接近开关 Low-voltage switchgear and controlgear--Control circuit devices and switching element--Section 2: Proximity switches
额定电压10kV、35kV架空绝缘电缆 Aerial insulated cables with rated voltages of 10kV and 35kV
系统接地的型式及安全技术要求 Types and safety technical requirements of system earthing
卤钨灯 Tungsten halogen lamps
纸绝缘铅套市内通信电缆 Local telecommunication cables with paper insulation and lead sheath
铜芯星绞铅套高频对称通信电缆 High frequency symmetrical telecommunication cables with copper conductor star quads and lead sheath
硅外延片 Silicon epitaxial wafers
硅处延层、扩散层和离子注入层薄层电阻的测定 直排四探针法 Test method for sheet resistance of silicon epitaxial, diffused and ion-implanted layers using a collinear four-probe array
硅外延层晶体完整性检查方法 腐蚀法 Test method for crystallographic perfection of epitaxial layers in silicon by etching techniques
300 - 900μm硅片间隙氧含量红外吸收测量方法 300 - 900μm Silicon slices--Measuring of interstitial oxygen content--Infrared absorption method
硅晶体中间隙氧含量径向变化测量方法 Test method for determination of radial interstitial oxygen variation in silicon
硅外延层堆垛层错密度测定 干涉相衬显微镜法 Test method for stacking fault density of epitaxial layers of silicon by interference-contrast microscopy
硅外延层载流子浓度测定 汞探针电容-电压法 Silicon epitaxial layers--Determination of carrier concentration--Mercury probe Valtage-capacitance method
普通照明灯泡的安全要求 Safety requirements for tungsten filament lamps for domestis and similar general lighting purposes
电子调光设备性能参数与测试方法 Electronic lighting control equipment--Performance,Parameters and measurement methods
半导体材料术语 Semiconductor materials--Terms and definitions
绕接工具总规范 Wire wrapping tools,General specification for
热时间延迟开关总规范 Thermal time delay switch, Generic specification of
恒温开关总规范 Thermostatic switch, Generic specification of
继电保护和安全自动装置技术规程 Technical code for relaying protection and security automatic equipment
防火漏电电流动作报警器 Residual current operated alarm devices for fire prevention
电力电缆导体用压接型铜、铝接线端子和连接管 Compression type terminal lugs and ferrules for power cables with copper or aluminium conductors
间距1.27mm绝缘刺破型端接式聚氯乙烯绝缘带状电缆 PVC insulated ribbon cable with a pitch of 1.27mm suitable for insulation displacement termination
单边带电力线载波系统设计导则 Planning of single-sideband power line carrier systems
单相同步电机试验方法 Test procedure for single-Phase synchronous machine
绝缘胶粘带工频耐电压试验方法 Test method for dielectric strength of insulating adhesive tape at power frequency
家用和类似用途电自动控制器 第1部分: 通用要求 Automatic electrical controls for household and similar use Part 1: General requirements
家用和类似用途电自动控制器 家用电器用电控制器的特殊要求 Automatic electrical controls for household and similar use--P articular requirements for electrical controls for electrical household appliances
家用和类似用途电自动控制器 电动机热保护器的特殊要求 Automatic electrical controls for household and similar use--P articular requirements for thermal motor protectors
家用和类似用途电自动控制器 管形荧光灯镇流器热保护器的特殊要求 Automatic electrical controls for household and similar use-- Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
家用和类似用途电自动控制器 密封和半密封电动机-压缩机用电动机热保护器的特殊要求 Automatic electrical controls for household and similar use--Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
家用和类似用途电自动控制器 燃烧器电自动控制系统的特殊要 Automatic electrical controls for household and similar use--Particular requirements for automatic electrical burner control systems
家用和类似用途电自动控制器 压力敏感电自动控制器的特殊要求(包括机械要求) Automatic electrical controls for household and similar use--Particular requirementsfor automatic electrical pressure sensing controls including mechanical requirements
家用和类似用途电自动控制器 定时器和定时开关的特殊要求 Automatic electrical controls for household and similar use--Particular requirements for timers and time switches
家用和类似用途电自动控制器 电动水阀的特殊要求(包括机械要求) Automatic electrical controls for household and similar use--Particular requirements for electrically operated water valves, including mechanical requirements
家用和类似用途电自动控制器 温度敏感控制器的特殊要求 Automatic electrical controls for household and similar use--Particular requirements for temperature sensing controls
家用和类似用途电自动控制器 电动机用起动继电器的特殊要求 Automatic electical eontrols for household and similar use--Partieular requirements for electricaly operated motor starting relays
家用和类似用途电自动控制器 能量调节器的特殊要求 Automatic electrcal controls for household and similar use--Particular requirements for energy regulators
家用和类似用途电自动控制器 电动门锁的特殊要求 Automatic electrcal controls for household and similar use particular requirements for electrically operated door locks
家用和类似用途电自动控制器 家用洗衣机电脑程序控制器的特殊要求 Automatic electrical controls for household and similar use--Particular requirements for household washing machine microcomputer controller
家用和类似用途电自动控制器 湿度敏感控制器的特殊要求 Automatic electrical controls for household and similar use--Particular requirements for humidity sensing controls
家用和类似用途电自动控制器 电起动器的特殊要求 Automatic electrical controls for household and similar use-Particular requirements for electric actuators
电气继电器 第8部分: 电热继电器 Thermal electrical relays
电气继电器 电气继电器的触点性能 Electrical relays--Contact performance of electrical ralays
电气继电器 有或无电气继电器 Electrical relays--All-or-nothing electrical relays
电气继电器 第五部分: 电气继电器的绝缘试验 Electrical relays--Part 5: Insulation tests for electrical relays
电气继电器 第十四部分: 电气继电器触点的寿命试验 触点负载的优先值 Electrical relays--Part 14: Endurance test for electrical relay contacts--Preferred values for contact loads
电气继电器 第十五部分: 电气继电器触点的寿命试验 试验设备的特性规范 Electrical relays--Part 15: Endurance tests for electrical relay contacts--Specification for the characteristics of test equipment
电气继电器 第十八部分: 有或无通用继电器的尺寸 Electrical relays--Part 18: Dimensions for general purpose all-or-nothing relays
电气继电器 第3部分:它定时限或自定时限的单输入激励量量度继电器 Electrical relays--Part 3: Single input energizing quantity measuring relays with dependent or independent time
电气继电器 第20部分: 保护系统 Electrical relays--Part 20: Protection (protective)systems
电气继电器 第22部分: 量度继电器和保护装置的电气干扰试验 第三篇: 辐射电磁场干扰试验 Electrical relays--Part 22: Electrical disturbance tests for measuring relays and protection equipment--Section three--Radiated electromagnetic field disturbance tests
电气继电器 第22部分:量度继电器和保护装置的电气干扰试验 第4篇:快速瞬变干扰试验 Electrical relays--Part 22: Electrical disturbance tests for measuring relays and protection equipment--Section 4: Fast transient disturbance test
电气继电器 第19部分: 分规范: 有质量评定的有或无机电继电器 Electrical relays--Part 19: Sectional specification--Electromechanical all-or-nothing relays of assessed quality
电气继电器 第19部分: 空白详细规范: 有质量评定的有或无机电继电器 试验一览表1,2和3 Electrical relays Part 19:Blank detail specification:Electromechanical all-or-nothing relays of assessed quality Test schedules 1,2 and 3
量度继电器和保护装置的电气干扰试验 第1部分: 1MHz脉冲群干扰试验 Electrical disturbance tests for measuring relays and protection equipment Part 1: 1MHz burst disturbance tests
量度继电器和保护装置的电气干扰试验 第2部分: 静电放电试验 Electrical disturbance tests for measuring relays and protection equipment Part 2: Electrostatic discharge tests
中小型旋转电机安全通用要求 General requirements for safety of small and medium size rotating electrical machines
交流高压接触器和基于接触器的电动机起动器 High-voltage alternating current contactors and contactor-based motor-starters
110kV及以上交流高压负荷开关 AC high voltage switches for rated voltages of 110kV and above
井用潜油三相异步电动机通用技术条件 Three-phase asynchronous submersible electric motors for oil well--General specification
永磁式直流伺服电动机通用技术条件 General specification for permanent magnet DC servomotors
线绕盘式直流伺服电动机通用技术条件 General specification for DC servomotors with wounded disc armature
电磁式直流伺服电动机通用技术条件 General specification for wound field DC servomotors
电气安装用导管 特殊要求--金属导管 Particular specifications for metal conduits for electrical installations
电气安装用导管 特殊要求--刚性绝缘材料平导管 Particular specifications for rigid plain conduits of insulating materials for electrical
电气安装用导管 特殊要求--可弯曲自恢复绝缘材料导管 Particular specifications for pliable self-recovering conduits of insulating materials for electrical installations
发电机断路器通用技术条 Common technical requirements for generator circuit-breaker
半导体材料牌号表示方法 Designations of semiconductor materials
重掺杂衬底上轻掺杂硅外延层厚度的红外反射测量方法 Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance
工业硅化学分析方法 1,10-二氮杂菲分光光度法测定铁量 Silicon metal--Determination of iron content-1,10-Phenanthroline spectrophotometric method
工业硅化学分析方法 铬天青-S分光光度法测定铝量 Silicon metal--Determination of aluminum content--Chrome azurol S spectrophotometric method
工业硅化学分析方法 钙量的测定 Silicon metal--Determination of calcium content
通信和电子设备用变压器和电感器总规范 Generic specification for transformers and inductors for use in telecommunication and electronic equipment
用栅控和非栅控二极管的电压-电容关系测定硅外延层中净载流子浓度的标准方法 Standard test method for net carrier density in silicon epitaxial layers by voltage-capacitance of gated and ungated diodes
实芯聚乙烯绝缘射频电缆 Radio frequency cables with solid polyethylene dielectric
道路交通信号灯安装规范 The installation specification for road traffic signals
道路交通信号灯技术条件及测试方法 The technical conditions and testing methods for rood traffic signals
人造金刚石用石墨片 Graphite for making synthetic diamond
电气绝缘无溶剂可聚合树脂复合物定义和一般要求 Definitions and general requirements for solventless polymerisable resinous compounds used for electrical insulation
电气绝缘无溶剂可聚合树脂复合物试验方法 Test methods for solventless polymerisable resinous compounds used for electrical insulation
发光强度、总光通量标准灯泡 Standard lamps for the measurment of luminous intensity and luminous flux
普通测光标准灯泡 Photometrle standard lamp for general lighting serviue
高压短弧氙灯 High pressure xenon short arc lamps
高压钠灯泡用镇流器性能要求 Ballast for high pressure sodium lamp property requirement
白炽灯泡光电参数的测量方法 Methods for measuring electrical and luminous parameters of incandescent lamps
显象管石墨乳试验方法 固形分、挥发分、灰分和pH值试验方法 Method for solid,volatile and ash content and pH value of colloidal graphite for kinescope
显象管石墨乳试验方法 粘度试验方法 Method for viscosity of colloldal graphite for kinescope
显象管石墨乳试验方法 电阻率试验方法 Method for resistivity of colloidal graphite for kinescope
显象管石墨乳试验方法 附着性试验方法 Method for adherence of colloidal graphite for kinescope
显象管石墨乳试验方法 造孔性试验方法 Method for aperture-forming effect of colloidal graphite for kinescope
显象管石墨乳试验方法 耐湿性试验方法 Method for moisture resistance of colloidal graphite for kinescope
显象管石墨乳试验方法 粒度试验方法 Method for size distribution of colloidal graphite for kinescope
显象管石墨乳试验方法 铁和铜含量试验方法 Method for iron and copper contents of colloidal graphite for kinescope
器具开关 第一部分: 通用要求 Switches for appliances Part 1: General requirements
器具开关 第2部分: 软线开关的特殊要求 Switches for appliances--Part 2: Particular requirements for cord switches
器具开关 第二部分: 转换选择器的特殊要求 Switches for appliances Part 2: Particular requirements for change-over selectors
器具开关 第2部分: 独立安装开关的特殊要求 Switches for appliances--Part 2: Particular requirements for independently mounted switches
金属氢化物镍圆柱密封碱性蓄电池总规范 General specification for alkaline nickle-metal hydride cylindrical sealed rechargeable batteries
电工设备结构总技术条件 General technical standard for electrical equipment structure
镉镍碱性蓄电池总规范 General specification for nickel-cadmium alkaline rechargeable single cells
管形荧光灯用交流电子镇流器一般要求和安全要求 A.C supplied electronic ballasts for tubular fluorescent lamps--General and safety requirements
管形荧光灯用交流电子镇流器性能要求 A.C supplied electronic ballasts for tubular fluorescent lamps--Performance requirements
微机线路保护装置 通用技术条件 General specification for microprocessor-based transmission line protection equipment
滤波器用压电陶瓷材料通用技术条件 Generic specification for piezoelectric ceramic for use in filters
油浸式电力变压器负载导则 Loading guide for oil-immersed power transformers
交流高压熔断器 术语 Alternating-current high-voltage fuses Terminology
交流高压熔断器 限流式熔断器 Alternating-current high-voltage fuses--Current-limiting fuses
交流高压熔断器 喷射式熔断器 Alternating-current high-voltage fuses--Expulsion fuse
交流高压熔断器 通用试验方法 Alternating-current high-voltage fuses--General test method
交流高压熔断器 关联电容器外保护用熔断器 Alternating-current high-voltage fuse--Fuses for the external protection of shunt power capacitors
按能力批准评定质量的电子设备用电源变压器分规范 Sectional specification for power transformers for use in electronic equipment for capability approval
按能力批准评定质量的电子设备用开关电源变压器分规范 Sectional specification for power transformers for switched mode power supplies (SMPS) for use in electronic equipment for capability approval
电子设备用电源变压器和滤波扼流圈总技术条件 Generic specification of power supply-transformers and filter chokes for use in electronic equipment
绝缘用胶粘带电腐蚀试验方法 Test method for electrolysis corrosion of electrical insulating adhesive tapes
射频电缆和连接器用六角和正方形压模腔体、压头、标准规、外导体压接套和中心接触件压接导线筒的尺寸 Dimensions for hexagonal and square crimping-die cavities, indentors, gauges,outer conductor crimp sleeves and centre contact crimp barrels for r.f. cables and connectors
低压无功功率静态补偿装置总技术条件 The specifications of low-voltage reactive power steady compensation equipments
非定时限单输入激励量的量度继电器及保护装置 Single input energizing quantify measuring relays and protective equipment with nonspecified-time
电液伺服阀试验方法 Hydraulic fluid power--Servovales--Test methods
隔爆型电机基本技术要求 General specification for flameproof electrical machines
锗单晶片 Monocrystalline germanium slices
压电陶瓷材料老化性能试验规程 Test program for the ageing properties of piezoelectric ceramics
道路机动车辆灯丝灯泡 尺寸、光电性能要求 Filament lamps for road vehicles--Dimensional,electrical and luminous requirements
道路机动车辆灯丝灯泡 性能要求 Filament lamps for road vehicles--Performance requirements
道路机动车辆灯丝灯泡 辅助用灯泡 Filament lamps for road vehicles--For supplementary purposes
磁粉探伤方法 Methods for magnetic particle testing
电线组件 Cord sets
油浸式电力变压器技术参数和要求 500kV级 Specification and technical requirements for oil immersed power transformers 500kV
电气安装用导管配件的技术要求 第1部分:通用要求 Specification for conduit fittings for electrical installations--Part 1: General requirements
旋转牵引电机基本试验方法 Basic test method for rotating traction electrical machines
高压架空线路和发电厂、变电所环境污区分级及外绝缘选择标准 Enviromental pollution classification and external insulation selection for high voltage transmission line, power plant and substation
远动设备及系统 接口(电气特性) Telecontrol equipment and systems interfaces (electrical characteristics)
远动设备及系统 第1部分: 总则 第2篇: 制定规范的导则 Telecontrol equipment and systems--Part 1: General considerations--Section 2 :Guide for specifications
小型风力发电机组结构安全要求 Safety requirements for small wind turbine generator structures
交流伺服系统通用技术条件 General specification for A.C.servo system
检验外壳防护用的试具 Test probes to verify protection by enclosures
编制电气安全标准的导则 Guide to the drafting of electrical safety standards
电子设备用机电开关 第5部分: 按钮开关分规范 Electromechanical switches for use in electronic equipment--Part 5: Sectional specification for pushbutton switches
绝缘液体燃烧性能试验方法 氧指数法 Test method for the determination of oxygen index of insulating liquids
晶片通用网格规范 Specification for a universal wafer grid
确定晶片坐标系规范 Specification for establishing a wafer coordinate system
电气继电器 第10部分: IEC电子元器件质量评定体系在有或无继电器上的应用 Electrical relays--Part 10: Application of the IEC quality assessment system for electronic components to all-or-nothing relays
集中网络控制装置的标准频率 Standard frequencies for centralized network control installations
量度继电器和保护装置安全设计的一般要求 General requirements of safety design for measuring relays and protection equipment
家用和类似用途移动式,无联锁、带开关及熔断器组合插座的安全要求 Safety requirements for switched and fused portable multiple socket-outlet without interlock for household and similar purposes
单端荧光灯的安全要求 Single-capped fluorescent lamps--Safety specifications
普通照明用自镇流灯的安全要求 Self-ballasted lamps for general lighting services--Safety requirements
保护用电流互感器暂态特性技术要求 Requirements for protective current transformers for transient performance
阀器件堆、装置和电力变流设备的端子标记 Terminal markings for valve device stacks and assemblies and for power convertor equipment
建筑物电气装置 第1部分:范围、目的和基本原则 Electrical installations of buildings Part 1: Scope, object and fundamental principles
建筑物电气装置 第4部分:安全防护 第42章:热效应保护 Electrical installations of buildings--Part 4: Protection for safety Chapter 42: Protection against thermal effects
建筑物电气装置 第5部分: 电气设备的选择和安装 第54章 接地配置和保护导体 Electrical installations of buildings Part 5: Selection and erection of electrical equipment Chapter54: Earthing arrangements and protective conductors
建筑物电气装置 第5部分 电气设备的选择和安装 第53章: 开关设备和控制设备 Electrical installations of buildings--Part 5: Selection and erection of electrical equipment Chapter 53: Switchgear and controlgear
高电压冲击试验用数字记录仪 第一部分: 对数字记录仪的要求 Digital recorders for measurements in high--Voltage impulse tests--Part 1: Requirements for digital recorders
家用和类似用途固定式电气装置的开关 第1部分:通用要求 Switches for household and similar fixed-electrical installations--Part 1: General requirements
家用和类似用途固定式电气装置的开关 第2部分: 特殊要求 第1节: 电子开关 Switches for household and similar fixed-electrical installations Part 2: Particular requirements Section 1: Electronic switches
家用和类似用途固定式电气装置的开关 第2部分: 特殊要求 第2节: 遥控开关(RCS) Switches for household and similar fixed electrical installations--Part 2: Particular requirements--Section2: Remote-control switches(RCS)
家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第1部分:一般规则 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCB)--Part 1: Genaral rules
家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第2.1部分:一般规则对动作功能与线路电压无关的RCCB的适用性 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses(RCCB)--Part 2.1: Applicability of the general rules to RCCB functionally independent of line voltage
家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第2.2部分:一般规则对动作功能与线路电压有关的RCCB的适用性 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB)--Part 2.2: Applicability of the general rules to RCCB functionally dependent on line voltage
家用和类似用途的带过电流保护的剩余电流动作断路器(RCBO) 第1部分:一般规则 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO)--Part 1: General rules
家用和类似用途的带过电流保护的剩余电流动作断路器(RCB0) 第2.1部分:一般规则对动作功能与线路电压无关的RCBO的适用性 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO) Part 2.1: Applicability of the general rules to RCBO functionally independent of line voltage
家用和类似用途的带过电流保护的剩余电流动作断路器(RCBO) 第2.2部分:一般规则对动作功能与线路电压有关的RCBO的适用性 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses(RCBO) Part 2.2: Applicability of the general rules to RCBO functionally dependent on line voltage
交流高压负荷开关--熔断器组合电器 High--voltage alternating current switch-fuse combinations
低压系统内设备的绝缘配合 第一部分: 原理、要求和试验 Insulation coordination for eguipment within low-voltage systems--Part 1: Principles,requirements and tests
电子调速微型异步电动机通用技术条件 GENERAL SPECIFICATION FOR Motors, asynchronous, miniature, electronic regulator
架空绞线用硬铝线 Hard-drawn aluminium wire for overhead line conductors
硅抛光片和外延片表面质量光反射测试方法 Test method for the surface quality of polished silicon wafers and epitaxial wafers by optical-reflection
非掺杂半绝缘砷化镓单晶深能级EL2浓度红外吸收测试方法 Test method for deep level EL2 concentration of undoped semi-insulating monocrystal gallium arsenide by measurement infrared absorption method
电气安装用超重荷型刚性钢导管 Extra-heavy duty rigid steel conduits for electrical installations
电气导管 电气安装用导管的外径和导管与配件的螺纹 Conduits for electrical purposes--Outside diameters of conduits for electrical installations and threads of conduits and fittings
连接器件 连接铜导线用的扁形快速连接端头 安全要求 Connecting devices--Flat quick-connect terminations for electrical copper conductors--Safety requirements
组合互感器 Combined transformers
工业电动洗衣机安全要求 Safety requirements for electric commercial clothes-washing equipment
干式电力变压器负载导则 Loading guide for dry-type power transformers
单端荧光灯 性能要求 Single-capped fluorescent lamp--Performance requirements
普通照明用自镇流荧光灯 性能要求 Self-ballasted lamps for general lighting service--Performance requirements
电气设备电源额定值的标记 安全要求 Marking of electrical equipment with ratings related to electrical supply-Safety requiremnts
500kV电流互感器技术参数和要求 Specification and technical requirements for 500kV current transformers
连接器件 连接铜导线用的螺纹型和无螺纹型夹紧件的安全要求 Connecting devices--Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors
家用和类似用途的器具耦合器 第一部分: 通用要求 Appliance couplers for household and similar general purposes Part 1: General requirements
家用和类似用途的器具耦合器 第二部分: 家用和类似设备用互连耦合器 Appliance couplers for household and similar general purposes Part 2: Interconnection couplers for household and similar equipment
家用和类似用途固定式电气装置电器附件外壳的通用要求 General requirements for enclosures for accessories for household and similar fixed electrcal installations
高压/低压预装式变电站 High-voltage/low-voltage prefabricated substations
电力变压器选用导则 The guide for choice power transformers
低压直流电源设备的特性和安全要求 Low-voltage power supply devices,d.c.output-Performance characteristics and safety requirements
家用洗衣机电脑程序控制器 Microcomputer controller for household washing machine
碱性二次电池和电池组 扣式密封镉镍可充整体电池组 Alkaline secondary cells and batteries sealed nickel--Cadmium rechargeable monobloc batteries in button cell design
带电作业用绝缘硬梯通用技术条件 General specification for insulating rigid ladder for live working
带电作业用绝缘手套 通用技术条件 General specification for insulating Gloves for live working
工业干洗机安全要求 Safety requirements for commercial dry-cleaning machines
绝缘液体 局部放电起始电压测定 试验程序 Insulating liquids-Determination of the partial discharge inception voltage (PDIV)-Test procedure
取自电缆或光缆的材料燃烧时释出气体的试验方法 第1部分: 卤酸气体总量的测定 Test on gases evolved during combustion of materials from cable Part 1: Determination of the amount of halogen acid gas
取自电缆或光缆的材料燃烧时释出气体的试验方法 第2部分: 用测量pH值和电导率来测定气体的酸度 Test on gases evolved during combustion of materials from cable Part 2: Determination of degree of acidity of gases by measuring pH and conductivity
电缆或光缆在特定条件下燃烧的烟密度测定 第1部分: 试验装置 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus
电缆或光缆在特定条件下燃烧的烟密度测定 第2部分: 试验步骤和要求 Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements
设备用断路器 Circuit-breaker for equipment
家用及类似用途机电式接触器 Electromechanical contactors for household and similar purposes
螺口灯座 Edison screw lampholders
卡口灯座 Bayonet lampholders
电工用铝包钢线 Aluminium-clad steel wires for electrical purposes
工业车辆 电动车辆牵引用铅酸蓄电池 优先选用的电压 Industrial trucks--Lead-acid traction batteries for electric trucks--Preferred voltages
旋转电机绝缘结构功能性评定 散绕绕组试验规程 热评定与分级 Rotating electrical machines Functional evaluation of insulation systems test procedures for wire-wound windings--Thermal evaluation and classification
接地系统的土壤电阻率、接地阻抗和地面电位测量导则 第1部分: 常规测量 Guide for measuring earth resistivity,Ground impedance,and earth surface potentials of a ground system Part 1: Normal measurements
半导体变流器 第6部分: 使用熔断器保护半导体变流器防止过电流的应用导则 Semiconductor converter--Part 6: Application guide for the protection of semiconductor converters against overcurrent by fuses
硬磁材料一般技术条件 Standard specifications for magnetically hard materials
电雷管引爆用聚氯乙烯绝缘电线 PVC insulated wires for ignition of electric detonators
数字通信用对绞或星绞多芯对称电缆 第1部分: 总规范 Multicore and symmetrical pair/quad cables for digital communications--Part 1: Generic specification
数字通信用对绞或星绞多芯对称电缆 第2部分: 水平层布线电缆分规范 Multicore and symmetrical pair/quad cables for digital communications--Part 2: Horizontal floor wiring--Sectional specification
数字通信用对绞或星绞多芯对称电缆 第3部分: 水平层布线电缆空白详细规范 Multicore and symmetrical pair/quad cables for digital communications--Part 3: Horizontal floor wiring--Blank detail specification
数字通信用对绞或星绞多芯对称电缆 第4部分: 工作区布线电缆分规范 Multicore and symmetrical pair/quad cables for digital communications--Part 4: Work area wiring--Sectional specification
数字通信用对绞或星绞多芯对称电缆 第5部分: 工作区布线电缆空白详细规范 Multicore and symmetrical pair/quad cables for digital communications--Part 5: Work area wiring--Blank detail specification
数字通信用对绞或星绞多芯对称电缆 第6部分: 垂直布线电缆分规范 Multicore and symmetrical pair/quad cables for digital communications--Part 6: Riser cables--Sectional specification
数字通信用对绞或星绞多芯对称电缆 第7部分: 垂直布线电缆空白详细规范 Multicore and symmetrical pair/quad cables for digital communications--Part 7: Riser cables--Blank detail specification
带电作业工具基本技术要求与设计导则 Technical requirements and design guide for live working tools
电气化铁道牵引供电系统微机保护装置通用技术条件 General specification of microprocessor-based protection equipment for electrified railway traction power supply system
微电机安全通用要求 General requirements for safety of electrical micro machines
户内装置用电缆最大外径的计算 Calculation of maximum external diameter of cables for indoor installations
低频电缆和电线无镀层和有镀层铜导体电阻计算导则 Guide to the calculation of resistance of plain and coated copper conductor of low-frequency cables and wires
交流1kV、直流1.5kV及以下电压带电作业用绝缘手工工具 Insulating hand tools for live working up to 1000V a.c and 1500V d.c
镉镍开口蓄电池用电解液 Electrolyte for vented nickel-cadmium cells
蜂窝电话用锂离子电池总规范 General specification of lithium-ion battery for cellular phone
蜂窝电话用金属氢化物镍电池总规范 General specification of nickel-metal hydride battery for cellular phone
蜂窝电话用镉镍电池总规范 General specification of nickel-cadmium battery for cellular phone
无焊连接 第2部分: 无焊压接连接 一般要求、试验方法和使用导则 Solderless connections Part 2: Solderless crimped connections--General requirements, test methods and practical guidance
无焊连接 第3部分: 可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 Solderless connections Part 3: Solderless accessible insulation displacement connections--General requirements,test methods and practical guidance
无焊连接 第4部分: 不可接触无焊绝缘位移连接 一般要求、试验方法和使用导则 Solderless connections Part 4: Solderless non-accessible insulation displacement connections--General requirements,test methods and practical guidance
无焊连接 第5部分: 无焊压入式连接 一般要求、试验方法和使用导则 Solderless connections Part 5: Solderless press-in connections--General requirements,test methods and practical guidance
电动道路车辆用铅酸蓄电池 Lead-acid batteries for electric vehicles
电动道路车辆用金属氢化物镍蓄电池 Nickel-metal hydride batteries of electric road vehicles
电动道路车辆用锂离子蓄电池 Lithium-ion batteries for electric road vehicles
电动道路车辆用锌空气蓄电池 Zinc-air batteries for electric road vehicles
电缆在火焰条件下的燃烧试验 第1部分: 单根绝缘电线或电缆的垂直燃烧试验方法 Tests on electric cables under fire conditions Part 1: Test on a single vertical insulated wire or cable
电缆在火焰条件下的燃烧试验 第2部分: 单根铜芯绝缘细电线或, 电缆的垂直燃烧试验方法 Tests on electric cables under fire conditions Part 2: Test on a single amall vertical insulated copper wire or cable
电缆在火焰条件下的燃烧试验 第3部分: 成束电线或电缆的燃烧试验方法 Tests on electric cables under fire conditions Part 3: Test on bunched wires or cables
电工用热固性树脂工业硬质层压板规范 定义、命名和一般要求 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes definitions,designations and general requirements
电动车辆传导充电系统一般要求 Electric vehicle conductive charging system--Part 1: General requirements
电动车辆传导充电系统 电动车辆与交流/直流电源的连接要求 Electric vehicle conductive charging system--Electric vehicles requirements for Conductive connection to an A.C/D.C.supply
电动车辆传导充电系统 电动车辆交流/直流充电机(站) Electric vehicle conductive charging system A.C./D.Electric vehicle charging station
管形荧光灯和其他放电灯线路用电容器一般要求和安全要求 Capacitors for use in tubular fluorescent and other discharge lamp circuits general and safety requirements
变流变压器 第1部分:工业用变流变压器 Convertor transformers--Part 1: Transformers for industrial applications
家用和类似用途的剩余电流动作保护器(RCD)--电磁兼容性 Residual current operated protective devices(RCD) for household and similar use--Electromagnetic compatibility
管形荧光灯和其他放电灯线路用电容器性能要求 Capacitors for use in tubular fluorescent and other discharge lamp circuits Performance requirements
一般照明用设备电磁兼容抗扰度要求 Equipment for general lighting purposes--EMC immunity requirements
半导体分立器件型号命名方法 The rule of type designation for discrete semiconductor devices
电子管管基尺寸 Dimensions of electronic tube bases
印制电路网格体系 Grid systems for printed circuits
电子元器件失效率试验方法 Determination of failure rate of electronic elements and components
印制电路术语 Terms for printed circuits
压电陶瓷材料体积密度测量方法 Piezoelectric ceramic materials--Measuring methods for determination of volume density
压电陶瓷材料性能试验方法 圆片径向伸缩振动模式 Test methods for the properties of piezoelectric ceramics Radial extension vibration mode for disk
压电陶瓷材料性能试验方法 长条横向长度伸缩振动模式 Test methods for the properties of piezoelectric ceramics Transverse length extension vibration mode for bar
电子设备用固定电阻器、固定电容器型号命名方 Type designation system for fixed resistors and fixed capacitors for use in electronic equipment
电阻器和电容器优先数系 Preferred number series for resistors and capacitors
恒定应力寿命试验和加速寿命试验方法总则 Constant stress life tests and acceleration life tests--General rules
寿命试验和加速寿命试验的图估计法 (用于威布尔分布) Life test and acceleration life test charts--Evaluation of their Weibull distributons
寿命试验和加速寿命试验的简单线性无偏估计法 (用于威布尔分布) Life test and acceleration life test--Simple linear deflection-free--Evaluation of Weibull distributions
寿命试验和加速寿命试验的最好线性无偏估计法 (用于威布尔分布) Life test and acceleration life test--Optimal linear deflection-free--Evaluation of Weibull distributions
电阻器和电容器的标志代码 Marking codes for resistors and capacitors
电子设备用固定电容器 第1部分: 总规范 Fixed capacitors for use in electronic equipment Part 1: Generic specitigation
手控电子元件的轴端尺寸 Dimensions of spendle ends for manually operated electronic components
电子管参数符号 Letter symbols of parameter for electronic tubes
高度进制为20mm的面板、架和柜的基本尺寸系列 Series of basic dimensions of panels, rack and cabinets for vertical increment of 20mm
高度进制为44.45mm 的面板、机架和机柜的基本尺寸系列 Series of basic dimensions of panels, racks and enclosures for vertical increment of 44.45mm
高度进制为20mm的插箱、插件基本尺寸系列 20mm increment's basic dimension series for subracks and subassemblies
高度进制为44.45mm 的插箱、插件的基本尺寸系列 Series of basic dimensions of subracks and plug-in units for vertical increment of 44.45mm
高度进制为20mm的台式机箱基本尺寸系列 20mm increment's basic dimensions series for cabiners
电子设备台式机箱基本尺寸系列 Series of basic dimensions of cases for electronic equipment
高度进制为44.45mm的窄柜基本尺寸系列 Series of basic dimension of narrow cabinets for vertical increment of 44.45mm
电子管外形尺寸 Outline dimensions of electrnic tubes
电子管引出帽连接尺寸 Connecting dimensions for caps of electronic tubes
黑白电视显象管测试方法 The methods of the measurement of the black and-white television picture tubes
闸流管与充气整流管测试方法 Methods of measurement for thyratrons and gas-filled rectifier tubes
陶瓷制品45°镜向光泽度试验方法 Standard test method for 45°specular gloss of ceramic ware
小功率电子管电性能测试方法 Measurements of the electrical properties of low-power electronic tubes
小功率电子管灯丝断续试验方法 Method of heater intermittent test of low-poewr electronic tubes
人造石英晶体的型号命名 Designations for synthetic quartz crystals
人造石英晶体 Synthetic quartz crystal
人造石英晶体使用指南 Guide to the use of synthetic quartz crystal
压电陶瓷材料型号命名方法 Designations for types of piezoelectric ceramics
铁电压电陶瓷词汇 Vocabulary for ferroelectric and piezoelectric ceramics
压电陶瓷材料性能测试方法 纵向压电应变常数d33的静态测试 Test methods for the properties of piezoelectric ceramics-- Static test for piezoelectric strain constant d33
压电陶瓷材料性能试验方法 居里温度Tc的测试 Test methods for the properties of piezoelectric ceramics test for Curie temperature Tc
压电陶瓷材料性能测试方法 柱体纵向长度伸缩振动模式 Test methods for the properties of piezoelectric ceramics--Longitudinal length extension vibration mode for rod
压电陶瓷材料性能测试方法 圆片厚度伸缩振动模式 Test methods for the properties of piezoelectric ceramics--Thickness extension vibration mode for disk
压电陶瓷材料性能测试方法 长方片厚度切变振动模式 Test methods for properties of piezoelectric ceramics--Thickness-shear vibration mode for rectangular plate
压电陶瓷材料性能测试方法 强场介电性能的测试 Test methods for the properties of piezoelectric ceramics--Test for dielectric properties in high electric field
压电陶瓷材料性能测试方法 热释电系数的测试 Test methods for the properties of piezoelectric ceramics--Test for the pyroelectric coefficient
半导体集成电路型号命名方法 The rule of type designation for semiconductor integrated circuits
半导体集成电路文字符号 引出端功能符号 Letter symbols for semiconductor integrated circuits--Letter symbols for function of pins
半导体集成电路TTL电路系列和品种 54/74LS系列的品种 Series and products for TTL semiconductor integrated circuits - Products of series 54/74 LS
半导体集成电路ECL电路系列和品种 Families and products of ECL circuits for semiconductor integrated circuits
半导体集成CMOS电路系列和品种 4000系列的品种 Series and products for semiconductor CMOS integrated circuits--Products of families 4000
电子设备雷击试验方法 Lightning test for electronic equipments
电子设备雷击试验导则 Guidance for lightning test for electronic equipments
氧化钇 Yttrium oxide
荧光级氧化铕 Europium oxide phosphor grade
交流电动机电容器 A.C. motor capacitors
真空电容器通用技术条件 General specification for vacuum capacitors
发射管电性能测试方法 总则 Measurements of the electrical properties of transmitting tubes - General
发射管电性能测试方法 阳极电流和栅极电流的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of current of anode and grid
发射管电性能测试方法 阴极发射电流的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of cathode emission current
发射管电性能测试方法 栅极反向电流的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of reverse grids current
发射管电性能测试方法 栅极热放射电流的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of grid thermo-emission current
发射管电性能测试方法 跨导、放大系数的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of transconductance and amplification factor
发射管电性能测试方法 阳极离子流的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of anode ion current
发射管电性能测试方法 阳极最大耗散功率和阳极过载耗散功率的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of maximum anode dissipation power and anode overload dissipation power
发射管电性能测试方法 栅极最大耗散功率的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of maximum grid dissipation power
发射管电性能测试方法 第一栅极截止电压的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of grid No1 cut-off voltage
发射管电性能测试方法 第三栅极截止电压的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of grid No3 cut-off voltage
发射管电性能测试方法 极间绝缘的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of interelectrode insulation
发射管电性能测试方法 共栅电路静态特性曲线的测试方法 Measurements of the electrical properties of transmitting tubes? Methods of measurements of static characteristic curve for common grid circuit
发射管电性能测试方法 共阴电路静态特性曲线的测试方法 Measurements of the electrical properties of transmitting tubes?Measuring methods of static characteristic curve for common cathode circuit
发射管电性能测试方法 输出功率的测试方法 Measurements of the electrical properties of transmitting tubes?Measuring methods of output power
发射管电性能测试方法 脉冲输出功率的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of pulse output power
发射管电性能测试方法 电气强度的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of electrical intensity
发射管电性能测试方法 电极间绝缘体高频损耗的测试方法 Measurements of the electrical properties of transmitting tubes ? Measuring methods of high frequency loss for interelectrode insulators
发射管电性能测试方法 频率特性曲线的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of frequency characteristic curve
发射管电性能测试方法 第一栅极电流截止电压的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of grid No1 current cut-off voltage
发射管电性能测试方法 静态特性参考点的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of static characteristic reference point
发射管电性能测试方法 振动稳定性的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of vibration stability
发射管电性能测试方法 第三栅极控制能力的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of grid No3 control ability
发射管电性能测试方法 线性放大管双音互调失真的测试方法 Measurements of the electrical properties of transmitting tubes - Measuring methods of dual tone inter-modulation distortion of linear amplifier tubes
发射管电性能测试方法 图象输出功率的测试方法 Measurements of the electrical properties of transmitting tubes - Methods of measuring the vision output power
发射管电性能测试方法 功率增益的测试方法 Measurements of the electrical properties of transmitting tubes - Methods of measuring the power gain
发射管电性能测试方法 三音互调失真的测试方法 Measurements of the electrical properties of transmitting tubes - Methods of measuring the inter-modulation distortion of a three tone signal
发射管电性能测试方法 低频亮度非线性的测试方法 Measurements of the electrical properties of transmitting tubes - Method of measuring the non-linearity in the luminance of the lower frequency
发射管电性能测试方法 由亮度信号不同引起的色度信号失真 (微分增益DG和微分相位DP) 的测试方法 Measurements of the electrical properties of transmitting tubes?Methods of measuring the distortion in the chrominance signal due to the luminance (differential gain and dfferential phgase)
发射管电性能测试方法 同步脉冲压缩的测试方法 Measurements of the electrical properties of trausmitting tubes - Methods of measuring the press of synchronizing pluse
荧光显示管测试方法 Methods of measurement for fluorescent display tubes
发射管电性能测试方法 交叉调制的测试方法 Measurements of the electrical properties of transmitting tubes - Method of measuring the cross modulation
液晶显示器件型号命名方法 The rule of type designation of liquid crystal display devices
半导体器件 分立器件和集成电路 第2部分: 整流二极管 Semiconductor devices--Discrete devices and integrated circuits--Part 2: Rectifier diodes
荧光粉性能试验方法 Test methods for properties of phosphors
光致荧光粉测试方法 Measuring method for the phosphor excited by light
阴极射线致荧光粉测试方法 Measuring method of the phosphor excited by cathod rays
荧光粉牌号 Type of phosphor
电子设备用可变电容器的使用导则 Guide to the use of variable capacitors in electronic equipment
电子设备用可变电容器的试验方法 Methods of test of variable capacitors in electronic equipment
钨丝 Tungsten wires
钼丝 Molybdenum wires
吸气剂术语 Getter terms
半导体集成电路 电压调整器系列和品种 Series and products of voltage regulators for semiconductor integrated circuits
半导体集成电路 电压调整器测试方法的基本原理 Semiconductor integrated circuits--General principles of measuring methods of voltage regulator
敏感元器件术语 Terms of sensor
半导体器件 分立器件 第8部分: 场效应晶体管 Semiconductor devices--Discrete devices--Part 8: Field-effect transistors
半导体分立器件和集成电路 第7部分: 双极型晶体管 Semiconductor discrete devices and integrated circuits--Part 7: Bipolar transistors
无金属化孔单双面印制板分规范 Sectional specification:single and double sided printed boards with plain holes
有金属化孔单双面印制板分规范 Sectional specification:single and double sided printed boards with plated-through holes
印制电路板设计和使用 Design and use of printed boards
多层印制板 分规范 Seetional spocification--Multilayer printed boards
印制板 第10部分: 有贯穿连接的刚挠双面印制板规范 Printed boards--Part 10: Specification for flex-rigid double-sided printed boards with through connections
预制内层层压板规范(半制成多层印制板) Specification for mass lamination panels (semi-manufactured multilayer printed boards)
半导体器件 分立器件和集成电路总规范 (可供认证用) Semiconductor devices - Generic specification for discrete devices and integrated circuits
电子管词汇 Vocabulary of electronic tubes
液晶显示器件测试方法 Measuring methods for liquid crystal display devices
印制板表层绝缘电阻测试方法 Test method of surface insulation resistance for printed boards
印制板金属化孔镀层厚度测试方法 微电阻法 Micro-resistance test method of plating thickness of platedthrough holes for printed boards
印制板拉脱强度测试方法 Test methods of pull strength for printed boards
印制板抗剥强度测试方法 Test methods of peel strength for printed boards
印制板翘曲度测试方法 Test methods of platness for printed boards
金属和氧化覆盖层厚度测试方法 截面金相法 Test methods for thickness of metal and oxide coating by microscopical examination of cross-section
印制板镀层附着力试验方法 胶带法 Test method of plating adhesion by adhesive type for printed boards
印制板镀涂覆层厚度测试方法 β反向散射法 Test method of plating and coating thickness by beta backscattering for printed boards
印制板镀层孔隙率电图象测试方法 The electrographic test method of plating porosity for printed boards
印制板可焊性测试方法 Test method of solderability for printed boards
印制板耐热冲击试验方法 Test methods of thermal shock for printed boards
印制板互连电阻测试方法 Test method of interconnection resistance for printed boards
印制板金属化孔电阻的变化 热循环测试方法 Test method of change in resistance of plated-through holes--Thermal cycling for printed boards
印制板蒸汽-氧气加速老化试验方法 Test method of steam/oxygen accelerated ageing of printed board
印制板绝缘涂层耐溶剂和耐焊剂试验方法 Test method for solvent and flux resistance of insulating coating on printed boards
印制板一般检验方法 General examination method for printed boards
多层印制板内层绝缘电阻测试方法 Test method for insulation resistance within inner layers of multilayer printed boards
多层印制板层间绝缘电阻测试方法 Test method for insulation resistance between layers of multilayer printed boards
印制板电路完善性测试方法 Test method for electrical integrity of printed boards
印制板镀层附着性试验方法 摩擦法 Test method for plating adhesion of printed boards--Burnishing
印制板镀层孔隙率测试方法 气体暴露法 Test method for plating porosity of printed boards--The gas exposure method
印制板表面离子污染测试方法 Test method for surface ionic contamination of printedboards
印制板阻燃性能测试方法 Test method for flammability of printed boards
印制电路用覆铜箔层压板通用规则 General rules for copper-clad laminated sheets for printed circuits
印制电路用覆铜箔层压板试验方法 Test methods for copper-clad laminated sheets for printed circuits
印制电路用覆铜箔酚醛纸层压板 Phenolic cellulose paper copper-clad laminated sheets for printed circuits
印制电路用覆铜箔环氧纸层压板 Epoxide cellulose paper copper-clad laminated sheets for printed circuits
印制电路用覆铜箔环氧玻璃布层压板 Epoxide woven glass fabric copper-clad laminated sheets for printed circuits
彩色显象管用荧光粉Y22-G3荧光粉 Phosphors for color picture tubes use--Phosphor Y22-G3
彩色显象管用荧光粉Y22-B2荧光粉 Phosphors for color picture tubes use--Phosphor Y22-B2
彩色显象管用荧光粉Y22-R4荧光粉 Phosphors for color picture tubes use--Phosphor Y22-R4
断路器电容器 Circuit-breaker capacitors
激光器型号命名方法 The type designation for laseres
印制板导线局部放电测试方法 Test method for partial discharge of conductors on printed boards
印制板导线载流量测试方法 Test method for current carrying capacity of conductors on printed boards
半导体集成电路线性放大器系列和品种 Families and products of linear amplifier for semiconductor integrated circuits
直流固定金属化纸介电容器总规范 Generic specification for fixed metallized paper dielectric capacitors for direct current
氦氖激光器系列型谱 The series and type spectrum for helium neon lasers
二氧化碳激光器系列型谱 The series and type spectrum for carbon dioxide lasers
半导体器件机械和气候试验方法 Mechanical and climatic test methods for semiconductor devices
吸气剂分类及型号命名方法 Classification and designation for getter
具有两个轴向引出端的圆柱体元件的尺寸测量 Measurement of the dimensions of a cylindrical component having two axial terminations
电容器和电阻器的最大外形尺寸 Maximum case dimensions for capacitors and resistors
单向引出的电容器和电阻器所需空间的测定方法 Method for the determination of the space required by capacitors and resistors with unidirectional terminations
电子产品现场工作可靠性、有效性和维修性数据收集指南 Guide for the collection of reliability,availability and maintainability data from field performance of electronic items
电子设备用机电元件 基本试验规程及测量方法 第1部分: 总则 Electromechanical components for electronic equipment Basic testing procedures and measuring methods--Part 1: General
电子设备用机电元件 基本试验规程及测量方法 第2部分: 一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验 Electromechanical components for electronic equipment Basic testing procedures and measuring methods--Part 2: General examination,electrical continuity and contact resistance tests,insulation tests and voltage stress tests
电子设备用机电元件 基本试验规程及测量方法 第3部分: 载流容量试验 Electromechanical components for electronic equipment Basic testing procedures and measuring methods--Part 3: Current-carrying capacity tests
电子设备用机电元件 基本试验规程及测量方法 第4部分: 动态应力试验 Electromechanical components for electronic equipment Basic testing procedures and measuring methods--Part 4: Dynamic stress tests
电子设备用机电元件 基本试验规程及测量方法 第5部分: 撞击试验(自由元件)、静负荷试验(固定元件)、寿命试验和过负荷试验 Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 5: Impact tests(free components),static load test(fixed components),endurance tests and overload tests
电子设备用机电元件 基本试验规程及测量方法 第6部分: 气候试验和锡焊试验 Electromechanical components for electronic equipment Basic testing procedures and measuring methods--Part 6: Climatic tests and soldering tests
电子设备用机电元件 基本试验规程及测量方法 第7部分: 机械操作试验和密封性试验 Electromechanical components for electronic equipment Basic testing procedures and measuring methods--Part 7: Mechanical operating tests and sealing tests
电子设备用机电元件 基本试验规程及测量方法 第8部分: 连接器、接触件及引出端的机械试验 Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 8: Connector tests(mechanical) and mechanical tests on contacts and terminations
电子设备用机电元件 基本试验规程及测量方法 第9部分: 杂项试验 Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 9: Miscellaneous tests
电子设备用机电元件 基本试验规程及测量方法 第11部分: 气候试验 Electromechanical components for electronic equipment--Basic testing procedures and measuring methods-Part 11: Climatic tests
电子设备用机电元件 基本试验规程及测量方法 第12部分: 锡焊试验第六篇: 试验12f-在机器焊接中封焊处耐焊剂和清洁剂 Electromechanical components for electronic equipment--Basic testing procedures and measuring methods-Part 12: Soldering tests-Section 6: Test 12f--Sealing against flux and cleaning solvents in machine soldering
电子设备用机电元件 基本试验规程及测量方法 第15部分: 接触件和引出端的机械试验 第八篇: 试验15h-接触件固定机构耐工具使用性 Electromechanical components for electronic equipment--Basic testing procedures and measuring methods-Part 15: Mechanical tests on contacts and terminations--Section 8: Test 15h--Contact retention system resistance to tool application
光电阴极光谱响应特性系列 The spectral response characteristic series of photocathodes
消费品使用说明 化妆品通用标签 Instructions for use of products--Generel labelling of cosmetics
印制板制图 Printed board drawing
电子元器件结构陶瓷材料 Structure ceramic materials used in electronic components
电子元器件结构陶瓷材料性能测试方法 气密性测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for gas-tightness
电子元器件结构陶瓷材料性能测试方法 杨氏弹性模量、泊松比测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for Youngs elastic modulus and Poisson ratio
电子元器件结构陶瓷材料性能测试方法 平均线膨胀系数测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for mean coefficient of linear expansion
电子元器件结构陶瓷材料性能测试方法 介质损耗角正切值的测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for dielectric loss angle tangent value
电子元器件结构陶瓷材料性能测试方法 体积电阻率测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for volume resistivity
电子元器件结构陶瓷材料性能测试方法 化学稳定性测试方法 Test methods for properties of structure ceramic used in electronic components--Test method for chemical durability
电子元器件结构陶瓷材料性能测试方法 透液性测定方法 Test methods for properties of structure ceramic used in electronic components--Test method for liquid permeability
电子元器件结构陶瓷材料性能测试方法 显微结构的测定 Test methods for properties of structure ceramic used in electronic components--Determination of microstructure
电容器用陶瓷介质材料 Ceramic dielectric materials used for capacitors
固体电介质微波复介电常数的测试方法 Test method for complex permittivity of solid dielectric materials at microwave frequencies
电子设备用固定电阻器 第一部分: 总规范 Fixed resistors for use in electronic equipment--Part 1: Generic specification
电子设备用固定电阻器第二部分: 分规范: 低功率非线绕固定电阻器 (可供认证用) Fixed resistors for use in electronic equipment--Part 2: Sectional specification: Fixed low-power nonwire wound resistors
电子设备用固定电阻器 第二部分: 空白详细规范: 低功率非线绕固定电阻器评定水平E (可供认证用) Fixed resistors for use in electronic equipment--Part 2: Blank detail specification: Fixed low-power non-wirewound resistors--Assessment level E
电子设备用固定电阻器 第四部分: 分规范: 功率型固定电阻器(可供认证用) Fixed resistors for use in electronic equipment--Part 4: Sectional specification: Fixed power resistors
电子设备用固定电阻器 第四部分: 空白详细规范: 功率型固定电阻器 评定水平E (可供认证用) Fixed resistors for use in electronic equipment--Part 4: Blank detail specification: Fixed power resistors Assessment level E
电子设备用固定电阻器 第五部分: 分规范: 精密固定电阻器 (可供认证用) Fixed resistors for use in electronic equipment--Part 5: Sectional specification: Fixed precision resistors
电子设备用固定电阻器 第五部分: 空白详细规范: 精密固定电阻器 评定水平E (可供认证用) Fixed resistors for use in electronic equipment--Part 5: Blank detail specification: Fixed precision resistors--Assessment level E
荧光粉名词术语 Terms for phosphors
电子管和半导体器件额定值制 Rating systems for electronic tubes and semiconductor devices
阴极射线管总规范(可供认证用) Generic specification for cathode ray tubes
彩色显象管空白详细规范(可供认证用) Blank detail specification for colour picture tubes
半导体器件 集成电路 第2部分: 数字集成电路 第一篇 双极型单片数字集成电路门电路(不包括自由逻辑阵列) 空白详细规范 Semiconductor devices--Integrated circuits--Part 2: Digital integrated circuits--Section one--Blank detail specification for bipolar monolithic digital integrated circuit gates(excluding uncommitted logic arrays)
电子设备用固定电容器 第8部分: 分规范: 1类瓷介固定电容器 Fixed capacitors for use in electronic equipment--Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, class 1
电子设备用固定电容器 第8部分: 空白详细规范 1类瓷介固定电容器 评定水平E Fixed capacitors for use in electronic equipment--Part 8: Blank detail specification Fixed capacitors of ceramic dielectric, class 1--Assessment level E
电子设备用固定电容器 第9部分: 分规范 2类瓷介固定电容器 Fixed capacitors for use in electronic equipment--Part 9: Sectional specification Fixed capacitors of ceramic dielectric, class 2
电子设备用固定电容器 第9部分: 空白详细规范 2类瓷介电容器 评定水平 E Fixed capacitors for use in electronic equipment--Part 9: Blank detail specification Fixed capacitor of ceramic dielectric, class 2 --Assessment level E
电子设备用固定电容器 第四部分: 分规范 固体和非固体电解质铝电容器(可供认证用) Fixed capacitors for use in electronic equipment--Part 4: Sectional specification--Aluminium electrolytic capacitors with solid and non-solid electrolyte
电子设备用固定电容器 第四部分: 空白详细规范 非固体电解质铝电容器 评定水平 E (可供认证用) Fixed capacitors for use in electronic equipment--Part 4: Blank detail specification--Aluminium electrolytic capacitors with non-solid electrolyte--Assessment level E
彩色显象管测试方法 Methods of measurement of colour picture tubes
示波管和指示管测试方法 Methods of measurement of oscilloscope tubes and indicator tubes
电力系统用串联电容器 第1部分: 总则 性能、试验和额定值 安全要求 安全导则 Series capacitors for power systems Part 1: General--Performance,testing and rating--Safety requirements--Guide for installation
锰铜、康铜精密电阻合金线、片及带 Manganin and constantan alloy wires,sheet and rolled wires for precision electrical resistance
黑白显象管空白详细规范 (可供认证用) Blank detail specification for black and white picture tubes
示波管和指示管空白详细规范 (可供认证用) Blank detail specification for oscilloscope tubes and indicator tubes
半导体器件 分立器件 第7部分: 双极型晶体管 第一篇 高低频放大环境额定的双极型晶体管空白详细规范 Semiconductor Devices Discrete devices Part 7: Bipolar transistors Section One-Blank detail specification for ambient-rated bipolar transistors for low and high frequency amplification
开关用双极型晶体管空白详细规范 Blank detail specification for bipolar transistors for switching applications
半导体器件 分立器件 第8部分: 场效应晶体管 第一篇 1GHz、5W以下的单栅场效应晶体管 空白详细规范 Semiconductor devices Discrete devices Part 8: Field-effect transistors Section One-Blank detail specification for singe-gate field-effect transistors up to 5W and 1GHz
液晶显示器件名词术语 Terms for liquid crystal displays
液晶显示器件外形尺寸标注及引线排布规则 Dimensionsing of outline and rule of terminals alignment for liquid crystal displays
电子设备用A类调谐可变电容器类型规范 Type specification for variable tuning capacitors--Type A in electronic equipments
电子设备用B类微调可变电容器类型规范 Type specification for variable trimmer capacitors--Type B in electronic equipments
电子设备用C类预调可变电容器类型规范 Type specification for variable preset capacitors--Type C in electronic equipments
空间电荷控制电子管总规范 General specification for space-charge controlled tubes
工业加热三极管空白详细规范 (可供认证用) Blank detail specification for industrial heating triodes
阳极耗散功率不大于1kW 的小功率发射管空白详细规范 (可供认证用) Blank detail specification for small power transmitting tubes of anode dissipation up to 1kW
盘封电子管空白详细规范 Blank detail specification for disk seal power tubes
电子设备用固定电容器 第五部分: 分规范 额定电压不超过3000伏的直流云母介质固定电容器试验方法的选择和一般要求 Fixed capacitors for use in electronic equipment Part 5: Sectional specification Fixed mica dielectric d.c.capacitors with a rated voltage not exceeding 3000V Selection of methods of test and general requirements
电子设备用固定电容 第五部分: 空白详细规范 额定电压不超过3000伏的直流云母介质固定电容器 评定水平E Fixed capacitors for use in electronic equipment Part 5: Blank detail specification Fixed mica dielectric d.c.capacitors with a rated voltage not exceeding 3000V Assessment level E
电子设备用固定电容器 第11部分: 分规范: 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器 (可供认证用) Fixed capacitors for use in electronic equipment--Part 11: Sectional specification: Fixed polyethylene-terephthalate film dielectric metal foil D.C.capacitors
电子设备用固定电容器 第11部分: 空白详细规范: 金属箔式聚乙烯对苯二甲酸乙二醇酯膜介质直流固定电容器 评定水平 E(可供认证用) Fixed capacitors for use in electronic equipment--Part 11: Blank detail specification: Fixed polyethylene-terephthalate film dielectric metal foil D.C. capacitors--Assessment level E
半导体器件 分立器件 第2部分: 整流二极管 第一篇 100A以下环境或管壳额定整流二极管(包括雪崩整流二极管)空白详细规范 Semiconductor devices Discrete devices Part 2: Rectifier diodes Section One-Blank detail specification for rectifier diodes(including avalanche recti-fier diodes)1, ambient and case-rated,up to 100A
半导体器件 分立器件 第6部分: 闸流晶体管 第一篇 100A以下环境或管壳额定反向阻断三极闸流晶体管空白详细规范 Semiconductor devices Discrete devices Part 6: Thyristors Section One-Blank detail specification for reverse blocking triode thyristors,ambient or case-rated,up to 100A
激光功率能量测试仪器规范 Specification for laser radiation power and energy measuring equipment
铁电陶瓷材料电滞回线的准静态测试方法 Quasi-static test method for ferroelectric hysteresis loop of ferroelectric ceramics
压电陶瓷振子频率温度稳定性的测试方法 Test method for freguency temperature stability of piezoelectric ceramic vibrator
氢闸流管测试方法 Methods of the measurement for hydrogen thyratron tubes
石英谐振器型号命名方法 The rule of type designation for quartz crystal units
晶体盒型号命名方法 The rule of type designation for crystal holders (enclosures)
通信设备条形机架基本尺寸 Basic dimensions of narrow frame used for telecommunication equipment
微波二极管测试方法 Measuring methods for microwave diodes
半导体器件 分立器件 第3部分:信号(包括开关)和调整二极管 Semiconductor devices--Discrete devices--Part 3: Signal(including switching)and regulator diodes
半导体器件 分立器件 第3部分: 信号(包括开关)和调整二极管 第一篇 信号二极管、开关二极管和可控雪崩二极管空白详细规范 Semiconductor devices Discrete devices Part 3: Signal(including switching) and regulator diodes Section One--Blank detail specification for signal diodes,switching diodes and controlled-avalanche diodes
电压调整和电压基准二极管 (包括温度补尝精密基准二极管) 空白详细规范 (可供认证用) Blank detail specification for volt age regulator diodes and voltage reference diodes, excluding temperature compensated precision reference diodes
半导体器件 分立器件 第6部分: 闸流晶体管 第二篇 100A以下环境或管壳额定的双向三极闸流晶体管空白详细规范 Semiconductor devices Discrete devices Part 6: Thyristors Section Two-Blank detail specification for bidirectional triode thyristors(triacs),ambient or case-rated,up to 100A
掺氮吸气剂含氮量测试方法 Test methods for nitrogen content of nitrogen-doped getter
释汞吸气剂性能测试方法 释汞吸气剂释汞特性的测试方法 Test methods for the characteristics of getter-mercury dispenser--Test methods for mercury yield characteristic of getter-mercury dispenser
释汞吸气剂性能测试方法 释汞吸气剂含汞量的测试方法 Test methods for the characteristics of getter-mercury dispenser--Test method for mercury content of getter-mercury dispenser
释汞吸气剂性能测试方法 释汞吸气剂放气量的测试方法 Test methods for the characteristics of getter-mercury dispenser--Test method for gas emission of getter mercury dispenser
释汞吸气剂性能测试方法 释汞吸气剂压粉牢固度的检验方法 Test methods for the characteristics of getter-mercury dispenser--Method for peel off test of getter-mercury dispenser
人造石英晶体制材 Lumbered synthetic quartz crystal
半导体集成电路静态读/ 写存储器空白详细规范(可供认证用) Blank detail specification for semiconductor integrated circuit static read/write memories
直热式负温度系数热敏电阻器总规范 (可供认证用) General specification for the directly heated negative temperature coefficient thermistors
直热式负温度系数热敏电阻器空白详细规范 评定水平E(可供认证用) Blank detail specification for directly heated negative temperature coefficient thermistors--Assessment level E
半导体集成电路 电压比较器测试方法的基本原理 Semiconductor integrated circuits--General principles of measuring methods of voltage comparators
半导体集成音响电路音频功率放大器测试方法的基本原理 General principles of measuring methods of audio power amplifiers for semicomductor audio integrated circuits
半导体集成非线性电路系列和品种 模拟乘- 除法器的品种 Families and variety of semiconductor integrated non-linear circuits variety of analog multipliers-dividers
半导体集成非线性电路系列和品种 时基电路的品种 Families and variety of semiconductor integrated non-linear circuits Variety of timers
半导体集成非线性电路系列和品种 模拟开关的品种 Families and variety of semiconductor integrated non-linear circuits variety of analog switch
半导体集成非线性电路系列和品种 锁相环的品种 Families and variety of semiconductor integrated non-linear circuits Variety of phase-locked loop
高原电力电容器 Power capacitors for high altitude districts
湿热带电力电容器 Power capacitors for damp tropics
电子设备用元器件(或部件)规范中可靠性条款的编写指南 Guide for the inclusion of reliability clauses into specifications for components (or parts) for electronic equipment
系统和设备研制生产中的可靠性程序 Reliability procedure for system and equipment development and production
固定电阻器电流噪声测量方法 Method of measurement of current noise generated in fixed resistors
电阻器非线性测量方法 Method of measurement of non-linearity in resistors
半导体集成电路外形尺寸 Outline dimensions of semiconductor integrated circuits
直热式阶跃型正温度系数热敏电阻器总规范 (可供认证用) Generic specification for the directly heated positive step-function temperature coefficient thermistors
直热式阶跃型正温度系数热敏电阻器空白详细规范 评定水平E (可供认证用) Blank detail specification for the directly heated positive step-function temperature coefficient thermistors--Assessement level E
电子设备用固定电容器第十五部分: 分规范 非固体或固体电解质钽电容器 (可供认证用) Fixed capacitors for use in electronic equipment--Part 15: Sectional specification--Fixed tantalum capacitors with non-solid or solid electrolyte
电子设备用固定电容器 第十五部分: 空白详细规范 固体定电解质和多孔阳极钽电容器 评定水平 E (可供认证用) Fixed capacitors for use in electronic equipment--Part 15: Blank detail specification--Fixed tantalum capacitors with solid electrolyte and porous anode--Assessment level E
激光产品的安全 第1部分: 设备分类、要求和用户指南 Safety of laser products Part 1: Equipment classification,requirements and user's guide
氦氖激光器参数测试方法 Measurement methods of parameter for helium neon laser
光电倍增管测试方法 Methods of measurement for photomultiplier tubes
光电管测试方法 Methods of measurement for phototubes
电子管极间电容测试方法 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
电子设备用固定电容器 第2部分: 分规范: 金属化聚乙烯对苯二甲酸酯膜介质 直流固定电容器 Fixed capacitors for use in electronic equipment--Part 2: Sectional specification--Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors
电子设备用固定电容器 第2部分: 空白详细规范 金属化聚乙烯对苯二甲酸酯膜介质 直流固定电容器 评定水平E Fixed capacitors for use in electronic equipment--Part 2: Blank detail specification--Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors--Assessment level E
电子设备用固定电阻器 第6部分: 分规范各电阻器可单独测量的固定电阻网络 Fixed resistors for use in electronic equipment--Part 6: Sectional specification--Fixed resistor networks with individually measurable resistors
电子设备用固定电阻器 第六部分: 空白详细规范: 阻值和功耗相同, 各电阻器可单独测量的固定电阻网络 评定水平 E (可供认证用) Fixed resistors for use in electronic equipment--Part 6: Blank detail specification--Fixed resistor networks with individually measurable resistors, all of equalvalue and equal dissipation--Assessment level E
电子设备用固定电阻器 第六部分: 空白详细规范: 阻值和功耗不同, 各电阻器可单独测量的固定电阻网络 评定水平 E (可供认证用) Part 6: Blank detail specification--Fixed resistor networks with individually measurable resistor of either different resistance values or different rated dissipations--Assessment level E
10kHz - 30MHz无源无线电干扰滤波器和抑制元件抑制特性的测量方法 Methods of measurement of the suppresion characteristics of passive radio interference filters and suppression components over the frequency range of 10kHz to30MHz
半导体器件散热器 通用技术条件 Heat sink of semiconductor devices--Generic specification
半导体器件散热器 型材散热器 Heat sink of smiconductor devices--Heat sink, extruded shapes
半导体器件散热器 叉指形散热器 Heat sink of semiconductor devices--Heat sink, Staggered fingers shapes
半导体器件 分立器件 第7部分: 双极型晶体管 第四篇 高频放大管壳额定双极型晶体管空白详细规范 Semiconductor devices Discrete devices Part 7: Bipolar transistors Section Four-Blank detail specification for case-rated bipolar transistors for high-frequency amplification
低频放大管壳额定的双极型晶体管空白详细规范 Blank detail specification for case-rated bipolar transistors for low-frequency amplification
半导体分立器件外形尺寸 Dimensions of outlines for semiconductor discrete devices
印制板导线耐电流试验方法 Test method for current proof of conductors on printed boards
印制板表层耐电压试验方法 Test methods for voltage proof of surface layers on printed boards
印制板金属化孔耐电流试验方法 Test methods for current proof of plated-through holes on printed boards
交流高压断路器的开合电容器组试验 The capacitor banks switching tests for A.C.high-voltage circuit-breaker
电力半导体器件用散热器 Heat sink for power semiconductor device
电力半导体器件用散热器热阻和流阻测试方法 Measuring method of thermal resistance and input fluid-output fluid pressure difference of heat sink for power semiconductor device
电力半导体器件用散热器 绝缘件和紧固件 Insulators and fasteners for heat sink for power semiconductor device
电工、电子设备机械结构术语 Terminology for mechanical structures of electrotechnical and electronic equipment
非蒸散型吸气材料及制品吸气性能测试方法 Test methods of gas absorption characteristic for non-evaporation gettering materials and products
单水氢氧化锂 Lithium hydroxide monohydrate
晶体盒总规范 Holders (Enclosures), crystal, general specification for
膜集成电路和混合膜集成电路总规范 Generic specification for film integrated circuits and hybrid film integrated circuits
通信设备过电压保护用气体放电管通用技术条件 General technical requirements of gas discharge tubes for the over-voltage protection of telecommunications installations
标准电容器 Standard capacitors
集成电路术语 Terminology for integrated circuits
数字电子计算机用阴极射线管显示设备通用技术条件 General specifications for CRT display device of computer
印制电路板外形尺寸系列 Series for printed boards outside dimension
电子设备用固定电容器 第八部分 (1): 分规范 1类高压瓷介电容器 (可供认证用) Fixed capacitors for use in electronic equipment--Part 8(1): Sectional specification: Fixed classs 1 high voltage ceramic dielectric capacitors
电子设备用固定电容器 第八部分(1): 空白详细规范 1 类高压瓷介电容器 评定水平 E (可供认证用) Fixed capacitors for use in electronic equipment--Part 8(1): Blank detail specification: Fixed class 1 ceramic dielectric capacitors--Assessment level E
电子设备用固定电容器 第九部分 (1): 分规范 2 类高压瓷介电容器 (可供认证用) Fixed capacitors for use in electronic equipment--Part 9(1): Sectional specification: Fixed class 2 high voltage ceramic dielectric capacitors
电子设备用固定电容器 第九部分 (1): 空白详细规范 2类高压瓷介电容器 评定水平 E (可供认证用) Fixed capacitors for use in electronic equipment--Part 9(1): Blank detail specification: Fixed class 2 ceramic dielectric capacitors--Assessment level E
电子设备用固定电容器 第10部分: 分规范 多层片式瓷介电容器 Fixed capacitors for use in electronic equipment--Part 10: Sectional specification--Fixed multilayer ceramic chip capacitors
电子设备用固定电容器 第10部分: 空白详细规范 多层片式瓷介电容器 评定水平E Fixed capacitors for use in electronic equipment--Part 10: Blank detail specification Fixed multilayer ceramic chip capacitors Assessment level E
电子工业用硅酸钾溶液 Potassium silicate solution for use in electronic industry
半导体集成TTL电路系列和品种 54/74 ALS 系列的品种 Series and products for semiconductor TTL integrated circuits--Products of 54/74ALS family
半导体器件 集成电路 第2部分: 数字集成电路 第五篇 CMOS数字集成电路4000B和4000UB系列空白详细规范 Semiconductor devices lntegrated circuits Part 2: Digital Semiconductor devices lntegrated circuits Part 2: Digital integrated circuits Section five-Blank detail specification for complementary MOS digital integrated circuits,series 4000B and 4000UB
半导体集成电路运算放大器空白详细规范 (可供认证用) Blank detail specification for semiconductor integrated circuit operational amplifiers
荧光数码显示管亮度稳定性试验方法 Methods of test of luminance stability for fluorescent display tubes
阳极耗散功率大于 1kW的玻壳发射管空白详细规范 (可供认证用) Blank detail specification for glass enevelope transmitting tubes of anode dissipation over 1kW
工业加热用四极管空白详细规范 (可供认证用) Blank detail specification for industrial heating tetrode
过电压保护气体放电管总规范 (可供认证用) General specification of gas discharge tubes for overvoltage protection
过电压保护气体放电管测试方法 Methods of measurement of gas discharge tubes for overvoltage protection
彩色显像管有效屏面尺寸 Useful screen dimensions for color picture tubes
液晶显示器件参数符号 Letter symbols of parameter for liquid crystal display devices
刚玉粉分析方法通则 General rule for analytical method of alundum powder
刚玉粉中氧化钙、氧化镁、二氧化硅、三氧化二铁、二氧化钛的电感耦合高频等离子体发射光谱法测定 Determination of CaO,MgO,SiO2,Fe2O3,TiO2 in alundum powder by ICP-AES
刚玉粉中三氧化二铁、氧化钙、氧化镁、氧化钠、氧化钾的原子吸收分光光度测定法 Determination of Fe2O3,CaO,MgO,Na2O and K2O in alundum powder by atomic absorption spectrophotometry
刚玉粉中三氧化二铝含量的络合滴定 氟化物释放测定法 Determination of Al2O3 in alundum powder by complexometric titration
刚玉粉中二氧化硅的比色测定法 Determination of SiO2 in alundum powder by colorimetry
刚玉粉中二氧化钛的比色测定法 Determination of TiO2 in alundum powder by colorimetry
刚玉粉中氯根的目视比浊测定法 Determination of chloride in alundum powder by visual turbidimetry
刚玉粉中碳和硫的测定方法 Methods for determination of carbon and sulphur in alundum powder
刚玉粉PH值的测定方法 Methods for determination of pH in alundum powder
刚玉粉灼烧失重的测定方法 Method for determination of ignition loss of alundum powder
蒸散型钡吸气剂 Barium flash getters
吸气剂性能测试方法通则 Generic rules for test method of getter properties
蒸散型钡吸气剂得钡量测试方法 Test method for barium yield of barium flash getter
蒸散型钡吸气剂载料和模中钡量的测定 Test method for barium content in getter fill and getter film of barium flash getter
吸气剂放气量测试方法 Test method for amount of gas evolved from getter
掺氮吸气剂释氮吸气动态曲线测试方法 Test method for nitrogen-released and gas-absorbed dynamic curve of nitrogen-doped getter
掺氮吸气剂钡膜分布测试方法 Test method for barium film distribution of nitrogen-doped getter
蒸散型钡吸气剂吸气性能测试方法 Test method for gettering properties of barium flash getter
非蒸散型吸气剂吸气性能测试方法 Test method for gettering properties of non-evaporable getter
吸气剂装载量测试方法 Test method for amount of filling getter
吸气剂压制或烧结牢固度测试方法 Test method for firmness of getter by pressure or sinter
吸气剂支架焊接强度测试方法 Test method for weld strenght of getter support
电子陶瓷名词术语 Terms for electronic ceramics
电子陶瓷零件技术条件 General specification for electronic ceramic parts
A 类瓷件技术条件 Specification for ceramic parts,type A
B 类瓷件技术条件 Specification for ceramic parts,type B
C 类瓷件技术条件 Specification for ceramic parts,type C
D 类瓷件技术条件 Specification for ceramic parts,type D
E 类瓷件技术条件 Specification for ceramic part,type E
F 类瓷件技术条件 Specification for ceramic parts,type F
铌酸锂、钽酸锂、锗酸铋、硅酸铋压电单晶材料型号命名方法 Designations for LiNbO3, LiTaO3, Bi12, GeO20, Bi12 SiO20 piezoelectric crystals
电子设备用机电开关 第1部分: 总规范 Electromechanical switches for use in electronic equipment--Part 1: Generic specification
电子设备用键盘开关 第一部分: 总规范 (可供认证用) Keyboard switches for use in electronic equipment--Part 1: Generic specification
电子设备用固定电阻器 第8部分:分规范:片式固定电阻器 Fixed resistors for use in electronic equipment--Part 8: Sectional specification: Fixed chip resistors
荧光数码显示管加速寿命试验方法 Methods of accelerated life test of fluorescent display tubes
阳极耗散功率大于1kW的金属陶瓷发射管空白详细规范(可供认证用) Blank detail specification for matal ceramic transmitting tubes of anode dissipation over 1kW
盖革-弥勒计数管测试方法 Methods of measurement of Geiger-muller counter tubes
电子设备用固定电容器 分规范: 1类高功率瓷介电容器(可供认证用) Fixed capacitors for use in electronic equipment--Sectional specification--Fixed high reactive power--Classl 1 ceramic dielectric capacitors
电子设备用固定电容器 空白详细规范: 1 类高功率瓷介电容器 评定水平E(可供认证用) Fixed capacitors for use in electronic equipment--Blank detail specification--Fixed high reactive power--Classl 1 ceramic dielectric capacitors assessment level E
连续波磁控管电性能测试方法 Measuring methods of electrical properties of continuous wave magnetrons
电子设备用固定电容器第7部分:分规范: 金属箔式聚苯乙烯膜介质直流固定电容器 Fixed capacitors for use in electronic equipment--Part 7: Sectional specification: Fixed polystyrene film dielectric metal foil d.c. capacitors
电子设备用固定电容器 第7部分: 空白详细规范:金属箔式聚苯乙烯膜介质直流固定电容器 评定水平E (可供认证用) Fixed capacitors for use in electronic equipment--Part 7: Blank detail specification: Fixed polystyrene film dielectric metal foil d.c. capacitors--Assessment level E
电子设备用固定电容器 第13部分: 分规范: 金属箔式聚丙烯膜介质直流固定电容器 (可供认证用) Fixed capacitors for use in electronic equipment--Part 13: Sectional specification: Fixed polypropylene film dielectric metal foil d.c. capacitors
电子设备用固定电容器 第13部分: 空白详细规范: 金属箔式聚丙烯膜介质直流固定电容器 评定水平E (可供认证用) Fixed capacitors for use in electronic equipment--Part 13: Blank detail specification: Fixed polypropylene film dielectric metal foil d.c. capacitors--Assessment level E
电子设备用固定电容器 第16部分: 分规范: 金属化聚丙烯膜介质直流固定电容器 (可供认证用) Fixed capacitors for use in electronic equipment--Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
电子设备用固定电容器 第16部分: 空白详细规范: 金属化聚丙烯膜介质直流固定电容器 评定水平E (可供认证用) Fixed capacitors for use in electronic equipment--Part 16: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors--Assessment level E
电子设备用压敏电阻器 第1部分: 总规范 Varistors for use in electronic equipment--Part 1: Generic specification
电子设备用压敏电阻器 第2部分: 分规范 浪涌抑制型压敏电阻器 Varistors for use in electronic equipment-Part 2: Sectional specification for surge suppression varistors
电子设备用压敏电阻器 第2部分: 空白详细规范 碳化硅浪涌抑制型压敏电阻器 评定水平E Varistors for use in electronic equipment-Part 2: Blank detail specification for silicon carbide surge suppression varistors Assessment leval E
电子设备用压敏电阻器 第2部分: 空白详细规范 氧化锌浪涌抑制型压敏电阻器 评定水平E Varistors for use in electronic equipment-Part 2: Blank detail specification for zinc oxide surge suppression varistors Assessment level E
阴极碳酸盐分析方法通则 General rule for analytical method of cathode carbonate
阴极碳酸盐中碳酸钡含量的测定 重铬酸钾碘量滴定法 Determination of BaCo3 in cathode carbonate by dichromate iodimetry
阴极碳酸盐中碳酸钙含量的络合滴定测定 Determination of CaCo3 in cathod carbonate by complexometric titration
阴极碳酸盐中碳酸钙、碳酸锶的原子吸收分光光度测定 Determination of CaCo3, SrCo3 in cathode carbonate by atomic absorption spectrophotometry
阴极碳酸盐中硝酸根的测定 Determination of nitrate in cathode carbonate
阴极碳酸盐中钠的原子吸收分光光度测定 Determination of Na in cathode carbonate by atomic absorption spectrophotometry
阴极碳酸盐中盐酸不溶物的测定 Determination of nonsolute for chloric acid in cathode carbonate
阴极碳酸盐中铁的测定 Determination of Fe in cathode carbonate
阴极碳硫盐中氯根的测定 Determination of chloride in cathode carbonate
阴极碳酸盐中硫酸根的测定 Determination of sulphate in cathode carbonate
阴极碳酸盐中重金属(以Pb计)的测定 Determination of heavy metals in cathode carbonate
阴极碳酸盐灼烧失重的测定 Determination of ignition losses in cathode carbonate
阴极碳酸盐粒度分布的测定 离心沉降法 Test method for particle distribution of cathode carb-onates by centrifugation sedimentation
阴极碳酸盐 Cathode carbonates
阴极碳酸盐牌号命名方法 Designation for cathode carbonates
示波管和显示管用Y1荧光粉 Phosphor Y1 for oscilloscope tubes and display tubes
示波管和显示管用Y14荧光粉 Phosphor Y14 for oscilloscope tubes and display tubes
黑白显像管用Y4-W2荧光粉 Phosphor Y4-W2 for black-white picture tubes
黑白显像管用Y4-B1荧光粉 Phosphor Y4-B1 for black-white picture tubes
黑白显像管用Y4-Y2荧光粉 Phosphor Y4-Y2 for black-white picture tubes
雷达指示管用Y16荧光粉 Phosphor Y16 for radar indicator tubes
双层屏指示管用Y3荧光粉 Phosphor Y3 for double-decker screen indicator tubes
双层屏指示管用G11荧光粉 Phosphor G11 for double-decker screen indicator tubes
双层屏指示管用G16荧光粉 Phosphor G16 for double-decker screen indicator tubes
示波管和显示管用Y10荧光粉 Phosphor Y10 for oscilloscope tubes and image display tubes
夜视器件和存储管用Y20荧光粉 Phosphor Y20 for low-light-level picture tubes and storage tubes
激光设备和设施的电气安全 Electrical safety of laser equipment and installations
标称电压1kV以上交流电力系统用并联电容器 第1部分: 总则--性能、试验和定额--安全要求--安装和运行导则 Shunt capacitors for a.c.power systems having a rated voltage above 1kV Part 1: General--Performance,testing and rating--Safety requirements--Guide for installation and operation
标称电压1kV以上交流电力系统用并联电容器 第2部分: 耐久性试验 Shunt capacitors for a.c.power systems having a rated voltage above 1kV Part 2: Endurance testing
标称电压1kV以上交流电力系统用并联电容器 第3部分: 并联电容器和并联电容器组的保护 Shunt capacitors for a.c.power systems having a rated voltage above 1kV Part 3: Protection of shunt capacitors and shunt capacitor banks
标称电压1kV以上交流电力系统用并联电容器 第4部分: 内部熔丝 Shunt capacitors for a.c.power systems having rated voltage above 1kV Part 4: Internal fuses
人造石英晶体中杂质的分析方法 Analytical method for impurities in the synthetic quartz crystal
人造石英晶体位错的X 射线形貌检测方法 Method for detecting dislocations of synthetic quartz crystal using X-ray topographic technique
标准电容箱 Standard capacitance boxes
激光小功率计性能检测方法 Parameters testing method of laser power meter in low range
固体激光材料名词术语 Terms and definitions of solid-state laser materials
激光晶体棒型号命名方法 Designation for laser crystal rods
红外探测材料型号命名方法 Designation for infrared detecting materials
激光棒波前畸变的测量方法 Test method for wavefront distortion of laser rods
激光棒侧向散射系数的测量方法 Test method for side direction scattering coefficient of laser rods
掺钕钇铝石榴石激光棒消光比的测量方法 Test method for extinction ratio of Nd: YAG laser rods
掺钕钇铝石榴石激光棒长脉冲激光阈值及斜率效率的测量方法 Test method for normal pulse lasing threshold and slope efficiency of Nd: YAG laser rods
掺钕钇铝石榴石激光棒连续激光阈值、斜率效率和输出功率的测量方法 Test method for continous lasing threshold, slope efficiency and output power of Nb: YAG laser rods
热释电材料热释电系数的测试方法 Test method for pyroelectric coefficient of pyroelectric materials
热释电材料介质损耗角正切 tanδ的测试方法 Test method for dielectric tangent of loss angle of pyroelectric material
热释电材料居里温度 Tc 的测试方法 Test method for curie temperature of pyroelectric materials
热释电材料介电常数的测试方法 Test method for the dielectric constant of pyroelectric materials
电光晶体铌酸锂、磷酸二氢钾和磷酸二氘钾消光比的测量方法 Test method for extinction ratio of LN, KDP and KDP electrooptic crystal
电子设备用A 类调谐可变电容器空白详细规范 Blank detail specification for variable tuning capacitors type A in electronic equipments
电子设备用装有整体C 类预调电容器的A 类调谐可变电容器空白详细规范 Blank detail specification for variable tuning capacitors type A fitted with integral preset capacitors type C in electronic equipments
电子设备用B 类微调可变电容器空白详细规范 Blank detail specification for variable trimmer capacitors type B in electronic equipments
电子设备用C 类预调可变电容器 空白详细规范 Blank detail specification for variable preset capacitors type C in electronic equipments
电子设备用固定电容器 分规范: 3 类瓷介电容器 (可供认证用) Fixed capacitors for use in electronic equipment - Sectional specification: Fixed capacitors of ceramic dielectric, class 3
电子设备用固定电容器 空白详细规范: 3 类瓷介电容器 评定水平 E (可供认证用) Fixed capacitors for use in electronic equipment - Blank detail specification: Fixed capacitors of ceramic dielectric, class 3 - Assessment level E
压电陶瓷材料性能测试方法 纵向压电应变常数 d33的准静态测试 Test methods for the properties of piezoelectric ceramics - Quasi-static test for piezoelectric strain content d33
压电陶瓷材料性能测试方法 相对自由介电常数温度特性的测试 Test methods for the properties of piezoelectric ceramics - Test methods for temperature characteristics of relative free dielectric constants
压电陶瓷材料性能测试方法 泊松比бE的测试 Test methods for the properties of piezoelectric ceramics test for Poisson's ratio
压电陶瓷材料和压电晶体声表面波性能测试方法 Test methods for SAW properties of piezoelectric ceramics and crystals
射频连接器 第1部分: 总规范 一般要求和试验方法 Redio-frequency connectors--Part 1: Generic specification--General requirements and measuring methods
压电陶瓷材料性能测试方法 低机械品质因数压电陶瓷材料性能的测试 Test methods for the properties of piezoelectric ceramics material with the low mechanical quality factor
压电陶瓷材料静态弯曲强度试验方法 Testing method for static flexural strength of piezoellectric ceramics
电子级水 Electronic grade water
电子级水测试方法通则 Generic rules for test methods of electronic grade water
电子级水电阻率的测试方法 Test methods, for resistivity of electronic grade water
电子级水中痕量金属的原子吸收分光光度测试方法 Test method for measuring trace metals in electronic grade water by atomic absorption spectrophotometry
电子级水中二氧化硅的分光光度测试方法 Test method for Si2O in electronic grade water by spectrophotometer
电子级水中痕量氯离子、硝酸根离子、磷酸根离子、硫酸根离子的离子色谱测试方法 Test method for trace chloride,nitrate,phosphate,sulfate in electronic grade water by ion-chromatography
电子级水中总有机碳的测试方法 Test method for total organic carbon in electronic grade water
电子级水中微粒的仪器测试方法 Test method for particles in electronic grade water by instrument
电子级水中细菌总数的滤膜培养测试方法 Test method for total bacterial count in electronic grade water by membrane filters
摄象管总规范(可供认证用) Generic specification for camera tubes
摄象管空白详细规范(可供认证用) Blank detail specification for camera tubes
摄象管测试方法 Methods of measurement for camera tubes
交流等离子体显示器件总规范 (可供认证用) Generic specification for AC plasma display devicas
交流等离子体显示器件测试方法 Methods of measurement for Ac plasma display devices
彩色显象管管基尺寸 Dimensions of base for colour picture tube
彩色显示管用Y30-G1 荧光粉 Phosphors Y30-G1 for color display tubes
彩色显示管用Y30-B1荧光粉 Phosphor Y30-B1 for color display tubes
半导体集成电路CMOS电路系列和品种 54/74HC 系列的品种 Series and products for CMOS semiconductor integrated circuits products of series 54/74HC
半导体集成电路CMOS电路系列和品种 54/74HCT 系列的品种 Series and products for CMOS semiconductor integrated circuits products of series 54/74HCT
膜集成电路和混合膜集成电路分规范 (采用鉴定批准程序) (可供认证用) Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedure
半导体分立器件文字符号 Letter symbols for discrete semiconductor devices
X 射线管总规范 (可供认证用) Generic specification for X-ray tubes
X 射线管光电性能测试方法 Measurements of the photoelectric properties for X-ray tubes
气体激光器文字符号 Letter symbols for gas lasers
气体激光器电源系列 Power supply series for gas lasers
半导体集成电路TTL 电路系列和品种 54/74F系列的品种 Series and products for TTL semiconductor integrated circuits - products of series 54/74F
射频同轴连接器耐射频高电位电压测试方法 Measuring method of radio-frequency high potential withstanding voltage for radio-frequency coaxial connectors
石英晶体元件 电子元器件质量评定体系规范 第1部分: 总规范 Quartz crystal units--A specification in the quality assessment system for electronic components--Part 1: Generic specification
石英晶体振荡器总规范 (可供认证用) Quartz crystal controlled oscillators - Generic specification for
石英晶体振荡器型号命名方法 The rule of type designation for quartz crystal oscillators
电子设备用固定电阻器 第七部分: 分规范 各电阻器不可单独测量的固定电阻网络 (可供认证用) Fixed resistors for use in electronic equipment Part 7: Sectional specification:Fixed resistor networks in which not all resistors are individually measurable
电子设备用固定电阻器 第七部分: 空白详细规范: 各电阻器不可单独测量的固定电阻网络 评定水平 E (可供认证用) Fixed resistors for use in electronic equipment - Part 7 : Blank detail specification - Fixed resistor networks in which not all resistors are individually measurable?Assessment level E
功率晶体管安全工作区测试方法 Test methods of safe operating area for power transistors
光纤光缆连接器 第2部分: F-SMA型光纤光缆连接器分规范 Connectors for optical fibres and cables-Part 2: Sectional specification for fibre optic connector--Type F-SMA
纤维光学开关 第一部分: 总规范(可供认证用) ibre optic switches - Part 1: Generic specification
纤维光学衰减器 第一部分: 总规范(可供认证用) Fibre optic attenuators - Part 1: Generic specification
印制电路用照相底图图形系列 The patternes series for artwork master of printed circuits
半导体器件 分立器件分规范 Semiconductor devices--Sectional specification for discrete devices
发光二极管空白详细规范 (可供认证用) Blank detail specification for light emitting diodes
PIN 二极管空白详细规范 (可供认证用) Blank detail specification for PIN diodes
光电倍增管总规范 (可供认证用) Generic specification for photomultiplier tubes
半导体器件 光电子器件分规范 (可供认证用) Semiconductor devices - Sectional specification for optoelectronic devices
直观存储管测试方法 Methods of measurement of display storage tubes
直观存储管分规范 (可供认证用) Sectional specification for display storage tubes
直观存储管空白详细规范 (可供认证用) Blank detail specification for display storage tubes
单色显示管空白详细规范 (可供认证用) Blank detail specification for monochrome display tubes
单色显示管测试方法 Methods of measurement of monochrome display tubes
限定燃烧性的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用) Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
一般用途的薄覆铜箔环氧玻璃布层压板 (制造多层印制板用) Thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, For use in the fabrication of multilayer printed boards
印制导线电阻测试方法 Test method for resistance of conductor of printed boards
压电晶体性能测试术语 Terms for the measurements of the properties of the piezoelectric crystals
压电晶体电弹常数测试方法 Test methods for electroelastic constants of piezoelectric crystals
自愈式低电压并联电容器 Low voltage shunt capacitors of the self-healing type
半导体集成电路分规范 (不包括混合电路) (可供认证用) Sectional specification for semiconductor integrated circuits, excluding hybrid circuits
电子设备用圆片型瓷介预调可变电容器总规范 Generic specification for disc-style ceramic dielectric variable pre-set capacitors in electronic equipment
电子设备用固定电容器 第十五部分: 空白详细规范 非固体电解质箔电极钽电容器 评定水平 E (可供认证用) Fixed capacitors for use in electronic equipment - Part 15: Blank detail specification - Tantalum capacitors with non-solid electrolyte and foil electrode - Assessment level E
电子设备用固定电容器 第十五部分: 空白详细规范 非固体电解质多孔阳极钽电容器 评定水平 E (可供认证用) Fixed capacitors for use in electronic equipment - Part 15: Blank detail specification - Tantalum capacitors with non-solid electrolyte and porous anode - Assessment level E
膜集成电路和混合膜集成电路术语 Terminology for film integrated circuits and hybrid film integrated circuits
半导体集成电路 微处理器及外围接口电路电参数测试方法的基本原理 General principle of measuring methods of microproces sors and peripheral interface circuits' parameters for semiconductor integrated circuits
半导体集成电路非线性电路系列和品种 采样/ 保持放大器的品种 Series and products of nonlinear circuits for semiconductor integrated circuits?Products of sample/hold amplifiers
半导体集成电路非线性电路系列和品种 电压/ 频率和频率/ 电压转换器的品种 Series and products of nonlinear circuits for semiconductor integrated circuits - Products of voltage/frequency and frequency/voltage converters
脉冲闸流管总规范 (可供认证用) General specification for pulse thyratrons
氢闸流管空白详细规范 (可供认证用) Blank detail specification for hydrogen thyratrons
扭曲向列型液晶显示器件总规范 (可供认证用) Generic specification of twisted nematic liquid crystal display devices
钟、表用扭曲向列型液晶显示器件空白详细规范 (可供认证用) Blank detail specification of twisted nematic liquid crystal displays for watches
计算器用扭曲向列型液晶显示器件空白详细规范 (可供认证用) Blank detail specification of twisted nematic liquid crystal displays for calculators
仪器、仪表用扭曲向列型液晶显示器件空白详细规范 (可供认证用) Blank detail specification of twisted nematic liquid crystal displays for instruments
磁控管总规范 General specification for magnetrons
连续波磁控管空白详细规范 Blank detail specification for continuous wave magnetrons
脉冲调制管空白详细规范 (可供认证用) Blank detail specification for pulse modulator tubes
小功率发射管的使用和维护 Application and care for small power transmitting tubes
电子设备用压电陶瓷谐振器总规范 (可供认证用) Generic specification for piezoelectric ceramic resonators for use in electronic equipment
电子设备用压电陶瓷谐振器分规范 低频压电陶瓷谐振器 Piezoelectric ceramic resonators for use in electronic equipment - Sectional specification for piezoelectric ceramic resonators for low frequency
电子设备用压电陶瓷谐振器空白详细规范 低频压电陶瓷谐振器 评定水平 E(可供认证用) Piezoelectric ceramic resonators for use in electronic equipment - Blank detail specification for piezoelectric ceramic resonators for low frequency - Assessment level E
电子设备用压电陶瓷谐振器分规范 高频压电陶瓷谐振器 (可供认证用) Piezoelectric ceramic resonators for use in electronic equipment - Sectional specification for piezoelectric ceramic resonators for high frequency
电子设备用压电陶瓷谐振器空白详细规范 高频压电陶瓷谐振器 评定水平 E(可供认证用) Piezoelectric ceramic resonators for use in electronic equipment - Blank detail specification for piezoelectric ceramic resonators for high frequency - Assessment level E
电子设备用压电陶瓷滤波器 电子元器件质量评定体系规范 第2部分: 分规范 鉴定批准 Piezoelectric ceramic filters for use in electronic equipment A specification in the quality assessment system for electronic components-Part 2: Sectional specification--Qualification approval
电子设备用压电陶瓷滤波器 电子元器件质量评定体系规范 第2部分; 分规范 鉴定批准 第一篇: 空白详细规范 评定水平E Piezoelectric ceramic filters for use in electronic equipment A specification in the quality assessment system for electronic components-Part 2: Sectional specification--Qualification approval Section 1: Blank detail specification-Assessment level E
电子设备强迫风冷热特性测试方法 Measuring methods of thermal characteristic for forced air cooling of electronic equipment
电子设备热性能评定 Thermal performances evaluation for electronic equipment
膜集成电路和混合膜集成电路空白详细规范 (可供认证用) Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of the qualification approval procedure
电流调整和电流基准二极管空白详细规范 Blank detail specification for current-regulator and current-reference diodes
半导体集成电路系列和品种 复印机用系列的品种 Series and products for semiconductor integrated circuits - Products for use in copying machine
过电压保护气体放电管空白详细规范 (可供认证用) Blank detail specification of gas discharge tubes for overvoltage protection
单结晶体管空白详细规范 Blank detail specification for unijunction transistors
半导体集成电路系列和品种 石英电子钟表用系列的品种 Series and products for semiconductor integrated circuits - Products for use in quartz electronic clock and watch
半导体集成电路系列和品种 磁敏传感器用系列的品种 Series and products for semiconductor integrated circuits - Products for use in transducer sensitive to magnetic
半导体集成电路系列和品种 数控机床用系列的品种 Series and products for semiconductor integrated circuits - Products for use in numerical control machine tool
100A以上环境或管壳额定双向三极晶闸管空白详细规范 Blank detail specification for bidirectional triode thyristors, ambient or case-rated, above 100A
100A以上环境或管壳额定反向阻断三极晶闸管空白详细规范 Blank detail specification for reverse blocking triode thyristors, ambient or case-rated, above 100A
5A/5A 以上环境或管壳额定逆导三极晶闸管空白详细规范 Blank detail specification for reverse conducting triode thyristors, ambient or case-rated, 5A/5A and above
5A以上环境或管壳额定可关断晶闸管空白详细规范 Blank detail specification for gate turn-off thyristors, ambient or case-rated, 5A and above
旁热式负温度系数热敏电阻器总规范 (可供认证用) Geanral specification for the indirectly heated thermistors with negative temperature coefficient
纤维光学隔离器 第1部分: 总规范 Fiber optic isolators--Part 1: Generic specification
纤维光学隔离器 第1-1部分: 空白详细规范 Fibre optic isolators--Part 1-1: Blank detail specification
射频混频器总规范 Mixers, radio frequency, general specification for
射频传输线(同轴)开关总规范 Switches(coaxial), RF transmission line, general specification for
电子设备用机电开关 第6部分: 微动开关分规范 Electromechanical switches for use in electronic equipment Part 6: Sectional specification for sensitive switches
电子设备用机电开关 第6部分:微动开关分规范 第1篇:空白详细规范 Electromechanical switches for use in electronic equipment Part 6: Sectional specification for sensitive switches Section 1: Blank 1: Blank detail specification
印制电路用挠性覆铜箔聚酰亚胺薄膜 Flexible copper-clad polyimide film for printed circuits
印制电路用挠性覆铜箔聚脂薄膜 Flexible copper-clad polyester film for printed circuits
印制电路用挠性覆铜箔材料试验方法 Test methods for flexible copper-clad material for printed circuits
红外探测器外形尺寸系列 Outline dimension series of infrared detectors
红外探测器参数测试方法 Measuring methods for parameters of infrared detectors
光电管总规范 (可供认证用) Generic specification for phototubes
光电管空白详细规范 (可供认证用) Blank detail specification for phototubes
光电倍增管空白详细规范 (可供认证用) Blank detail specification for photomultiplier tubes
检测用X射线管空白详细规范 (可供认证用) Blank detail specification of X-ray tubes for detection
分析用X射线管空白详细规范 (可供认证用) Blank detail for specification of X-ray tubes for analysis
激光辐射横模鉴别方法 Testing method of transverse mode of laser radiation
激光辐射发散角测试方法 Testing method of divergence angle of laser radiation
激光辐射光束直径测试方法 Testing method of beam diameter of laser radiation
振动与冲击传感器的校准方法 互易法校准 Methods for the calibration of vibration and shock pick-ups primary vibration calibration by reciprocity method
掺钕钇铝石榴石激光棒 Neodymium-doped yttrium aluminum garnet laser rods
激光辐射功率测试方法 Testing method for laser radiant power
激光辐射功率稳定度测试方法 Testing method for laser radiant power stability
电力定量器 Instrument for electric load control
荧光显示管总规范(可供认证用) General specification for vacuum fluorescent display tubes
荧光显示管空白详细规范(可供认证用) Blank detail specification for vacuum fluorescent display tubes
辉光放电显示管总规范(可供认证用) General specification for glow discharge display tubes
辉光放电显示管空白详细规范(可供认证用) Blank detail specification for glow discharge display tubes
电子元器件塑料封装设备通用技术条件 General specification for electronic components plastic packaging equipments
仪表元器件术语 Instrument components--Vocabulary
电子设备用固定电容器 第六部分: 分规范 金属化聚碳酸酯膜介质直流固定电容器(可供认证用) Fixed capacitors for use in electronic equipment--Part 6: Sectional specification Fixed metallized polycarbonate film dielectric d.c. capacitors
电子设备用固定电容器 第六部分: 空白详细规范 金属化聚碳酸酯膜介质直流固定电容器 评定水平 E(可供认证用) Fixed capacitors for use in electronic equipment--Part 6: Blank detail specification--Fixed metallized polycarbonate film dielectric d.c. capacitors--assessment level E
阴极射线管玻壳试验方法 Methods of test for cathode-ray tube bulbs
阴极射线管X射线辐射测试方法 Methods of measurement of X-radiation for cathode-ray tubes
黑白显象管玻壳总规范 (可供认证用) Generial specification for black-and-white picture tube bulbs
内燃机电站无线电干扰特性的测量方法及允许值 传导干扰 Limits and methods of measurement of radio interference characteristics of electric power plant with internal combustion engines--Conducted interference
半导体集成电路门阵列电路系列和品种 ECL系列的品种 Series and products for semiconductor gate array integrated circuits--Products of series ECL
半导体集成电路微型计算机电路系列和品种80C86系列的品种 semiconductor integrated circuits--Products of 80C86 family
半导体集成电路通信电路系列和品种 有源滤波器系列品种 Series and products of communication circuits for semiconductor integrated circuits--Products of active filters
半导体集成电路通信电路系列和品种 脉码调制编译码器系列品种 Series and products of communication circuits for semiconductor integrated circuits--Products of PCM coder-decoders
半导体集成电路通信电路系列和品种 模拟开关阵列系列品种 Series and products of communication circuits for semiconductor integrated circuits--Products of analogue switch arraies
半导体集成电路通信电路系列和品种 双音多频电路系列品种 Series and products of communication circuits for semiconductor integrated circuits--Products of dual-tone multi-frequency circuits
半导体集成电路通信电路系列和品种 电话电路系列品种 Series and products of communication circuits for semiconductor integrated circuits--Products of telephone circuits
半导体集成电路通信电路系列和品种 频率合成器系列品种 Series and products of communication circuits for semiconductor integrated circuits--Products of frequency synthesizers
半导体集成电路通信电路系列和品种 数字交换系统接口电路系列品种 Series and products of communication circuits for semiconductor integrated circuits--Products of digital switching system interface circuits
半导体集成电路模拟开关测试方法的基本原理 General principles of measuring methods of analogue switches for semiconductor integrated circuits
半导体集成电路模拟乘法器测试方法的基本原理 General principles of measuring methods of analogue multiplier for semiconductor integrated circuits
半导体集成电路时基电路测试方法的基本原理 General principles of measuring methods of timer circuits for semiconductor integrated circuits
半导体集成电路模拟锁相环测试方法的基本原理 General principles of measuring methods of analogue phase-loop for semiconductor integrated circuits
半导体集成电路数字锁相环测试方法的基本原理 General principles of measuring methods of digital phase-locked loop for semiconductor integrated circuits
氦氖激光器技术条件 He-Ne laser specification
闸流管与充气整流管总规范 (可供认证用) General specification for thyratrons and gas-filled rectifier tubes
闸流管与充气整流管空白详细规范 (可供认证用) Blank detail specification for thyratorns and gas-filled rectifier tubes
半导体集成电路 塑料双列封装冲制型引线框架规范 Semiconductor integrated circuits--Specification for stamped leadframes of plastic DIP
半导体集成电路封装术语 Terminology of packages for semiconductor integrated circuits
半导体集成电路电压/频率和频率/电压转换器测试方法的基本原理 General principles of measuring methods of V/F and F/V converters for semiconductor integrated circuits
半导体集成电路采样/保持放大器测试方法的基本原理 General principles of measuring methods of Sample/Hold amplifiers for semiconductor integrated circuits
彩色液晶显示器件的光度和色度的测试方法 Photomentric and colorimetric methods of measurement of color liquid crystal displays
彩色液晶显示器件空白详细规范 (可供认证用) Blank detail specification of color liquid crystal displays
半导体集成电路双极熔丝式可编程只读存储器空白详细规范(可供认证用) Blank detail specification for semiconductor integrated circuit fusible-link programmable bipolar read-only memories
单孔轴套安装、轴控电子元件的安装尺寸 Dimensions for the mounting of single-hole, bush-mounted, spendle-operated electronic components
电子设备用固定电容器 第3 部分: 分规范 片状钽固定电容器(可供认证用) Fixed capacitors for use in electronic equipment--Part 3: Sectional specification--Fixed tantalum chip capacitors
电子设备用固定电容器 第3 部分: 空白详细规范 片状钽固定电容器 评定水平 E(可供认证用) Fixed capacitors for use in electronic equipment--Part 3: Blank detail specification:chip capacitors--Assessment level E
显示管防眩玻屏技术要求及试验方法 Technical requirement and test method for the non-glare display glass tube
掺铷钇铝石榴石激光棒尺寸系列 Dimension series for neodymium-doped yttrium aluminum garnet laser rods
半导体集成电路TTL电路系列和品种 PAL系列的品种 Series and products for TTL semiconductor integrated circuits--Products of series PAL
变像管和像增强管总规范(可供认证用) Generic specification for image-converter tubes and image intensifier tubes
变像管和像增强管空白详细规范(可供认证用) Blank detail specification for image-converter tubes and image intensifier tubes
变像管和像增强管测试方法 The methods of measurement for image-converter tubes and image intensifier tubes
充气稳压管总规范(可供认证用) Generic specification for gas-filled voltage Stabilizing tubes
电容器纸介质损耗因数(tanδ)测定法 Method of test for dielectric dissipation factor (tanδ) of capacitor paper at power frequence
电子设备热设计术语 Terms for thermal design of electronic equipment
交流等离子体显示器件空白详细规范(可供认证用) Blank detail specification for AC plasma display devices
电子设备用固定电容器 第14部分: 分规范 抑制电源电磁干扰用固定电容器 Fixed capacitors for use in electronic equipment--Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
电子设备用固定电容器 第14部分: 空白详细规范 抑制电源电磁干扰用固定电容器 评定水平D Fixed capacitors for use in electronic equipment--Part: 14 Blank detail specification--Fixed capacitors for electromagnetic interference suppression and connection to the supply mains--Assessment level D
有贯穿连接的单、双面挠性印制板技术条件 Specification for single and double sided flexible printed boards with through connections
无贯穿连接的单、双面挠性印制板技术条件 Specification for single and double sided flexible printed boards without through connections
电子设备用固定电容器 第17部分: 分规范 金属化聚丙烯膜介质交流和脉冲固定电容器 Fixed capacitors for use in electronic equipment--Part 17: Sectional specification--Fixed metallized polypropylene film dielectric a.c and pulse capacitors
电子设备用固定电容器 第17部分: 空白详细规范 金属化聚丙烯膜介质交流和脉冲固定电容器 评定水平E Fixed capacitors for use in electronic equipment--part 17: Blank detail specification--Fixed metallized polypropylene film dielectric a.c and pulse capacitors--Assessment level E
厚膜集成电路用氧化铝陶瓷基片 Alumina ceramic substrates for thick film integrated circuits
薄膜集成电路用氧化铝陶瓷基片 Alumina ceramic substrates for thin film integrated circuits
挠性印制电路用涂胶聚酯薄膜 Adhesive coated polyester film for flexible printed circuits
挠性印制电路用涂胶聚酰亚胺薄膜 Adhesive coated polyimide film for flexible printed circuits
黑白监视器通用技术条件 General specification for black-white monitors
半导体集成电路封装结到外壳热阻测试方法 Junction-to-case thermal resistance test methods of packages for semiconductor integrated circuits
电子设备用石英晶体元件 空白详细规范 电阻焊石英晶体元件 评定水平 E Quartz crystal units for use in electronic equipment--Blanr detail specification--Resistance welded quartz crystal units--Assessment level E
半导体集成电路石英钟表电路测试方法的基本原理 General principles of measuring methods for quartz clock and watch circuits of semiconductor integrated circuits
体效应二极管空白详细规范 Blank detail specification for gunn diodes
膜集成电路和混合集成电路外形尺寸 Case outlines for film integrated circuits and hybrid integrated circuits
压电陶瓷换能元件总规范 Generic specification for piezoelectric ceramic transducing elements
印制板用频率低于3MHz的连接器 第1 部分: 总规范 一般要求和编制有质量评定的详细规范的导则 Connectors for frequencies below 3MHz for use with printed boards--Part l: Generic specification--General requirements and guide for the preparation of detail specifications, with assessed quality
印制板用频率低于3MHz的连接器 第2部分: 有质量评定的具有通用安装特征 基本网格2.54mm(0.1in)的印制板用两件式连接器详细规范 Connectors for frequencies below 3MHz for use with printed boards--Part 2: Detail specification for two-part connectors with assessed quality,for printed boards,for basic grid of 2.54mm(0.1in) with commonmounting features
半导体激光光源总规范 General specification for light source of semiconductor lasers
固体激光器主要参数测试方 Measurement methods for main parameter of solid-state lasers
插入式电子元器件用插座及其附件总规范 Generic specification for sockets and accessories for electronic plug-in devices
微波检波、混频二极管 空白详细规范 Blank detail specification for microwave detectors and mixer diodes
变容二极管空白详细规范 Blank detail specification for variable capacitance diodes
压电铌酸锂单晶体声波衰减测试方法 Test method for bulk acoustic wave attenuation of piezoelectric lithium niobate crystals
端接件总规范 General specification for terminals
抑制射频干扰整件滤波器 第一部分: 总规范 Complete filter units for radio interference suppression--Part 1: Generic specification
抑制射频干扰整件滤波器 第二部分: 分规范 试验方法的选择和一般要求 Complete filter units for radio interference suppression--Part 2: Sectional specification--Selection of methods of test and general requirements
半导体器件 第6部分 晶闸管 Semiconductor devices--Part 6: Thyristors
晶闸管测试方法 逆导三极晶闸管 Measuring methods for thyristor--Reverse conducting triode thyristor
晶闸管测试方法 可关断晶闸管 Measuring methods for thyristor--Gate turn-off thyristor
微电路模块机械和气候试验方法 Mechanical and climatic test methods for microcircuit modules
电子设备用电位器 第一部分: 总规范 Potentiometers for use in electronic equipment--Part 1: Generic specification
电子设备用电位器 第二部分: 分规范 螺杆驱动和旋转预调电位器 Potentiometers for use in electronic equipment--Part 2: Sectional specification--Lead-screw actuated and rotary preset potentiometers
电子设备用电位器 第二部分: 空白详细规范 螺杆驱动和旋转预调电位器 评定水平 E Potentiometers for use in electronic equipment--Part 2: Blank detail specification--Lead-screw actuated and rotary preset potentiometers--Assessment level E
气体激光器总规范 General specification for gas lasers
激光术语 Terminology for laser
多探针测试台通用技术条件 General specification for probe tester
电子设备机柜通用技术条件 General technical specification for cabinet of electronic equipment
收讯放大电子管空白详细规范 Blank detail specification for receiving tubes
彩色显示管测试方法 Methods of measurement of colour display tubes
电子设备用固定电容器 第19部分: 分规范 金属化聚乙烯对苯二甲酸酯膜介质直流片式固定电容器 Fixed capacitors for use in electronic equipment--Part 19: Sectional specification-- Fixed metallized polyethylene-terephthalate film dielectric chip D.C.capacitors
硅双栅场效应晶体管 空白详细规范 Blank detail specification for silicon dual-gate field-effect transistors
电子设备用机电开关 第3部分: 成列直插封装式开关分规范 Electromechanical switches for use in electronic equipments--Part 3: Sectional specification for in-line package switches
电子设备用机电开关 第3-1部分: 成列直插封装式开关 空白详细规范 Electromechanical switches for use in electronic equipments--Part 3-1: Blank detail specification for in-line package switches
视听系统设备互连用连接器的应用 Application of connectors for the interconnection of equipment in audio-visual systems
半导体器件 分立器件和集成电路 第5部分:光电子器件 Semiconductor devices--Discrete devices and integrated circuits--Part 5: Optoelectronic devices
金属氧化物半导体气敏元件总规范 Generic specification for gas sensors of metal-oxide semiconductor
电子设备用膜固定电阻网络 第1部分:总规范 Fixed film resistor networks for use in electronic equipment--Part 1: Generic specification
电容式湿敏元件与湿度传感器总规范 General specification for the capacitance type humidity sensor and transducer
离子束蚀刻机通用技术条件 Generic specification of ion beam etching system
离子注入机通用技术条件 Generic specification for ion implantation equipment
硬面光掩模用铬薄膜 Chrome thin films for hard surface photomasks
硬面光掩模基板 Hard surface photomask substrates
半导体设备电源接口 Power supply interface for semiconductor equipment
半导体设施接口技术文件编写导则 Directives for drafting semiconductor facilities interface specification
塑料四面引线扁平封装引线框架规范 Specification of leadframes for plastic quad flat package
蚀刻型双列封装引线框架规范 Specification of DIP leadframes produced by etching
小外形封装引线框架规范 Specification of leadframes for small outline package
半导体器件的机械标准化 第5部分: 用于集成电路载带自动焊(TAB)的推荐值 Mechanical standardization of semiconductor devices--Part 5: Recommendations applying to tape automated bonding (TAB) of integrated circuits
电子设备用电位器 第3部分: 分规范 旋转式精密电位器 Potentiometers for use in electronic equipment--Part 3: Sectional specification:Rotary precision potentiometers
电子设备用电位器 第3部分: 空白详细规范 旋转式精密电位器 评定水平E Potentiometers for use in electronic equipment--Part 3: Blank detail specification:Rotary precision potentiometers Assessment level E
电子设备用膜固定电阻网络 第2部分: 按能力批准程序评定质量的膜电阻网络分规范 Fixed film resistor networks for use in electronic equipment--Part 2: Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure
电子设备用膜固定电阻网络 第2部分: 按能力批准程序评定质量的膜电阻网络空白详细规范 评定水平E Fixed film resistor networks for use in electronic equipment--Part 2: Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure--Assessment level E
电子设备用固定电阻器 第5部分: 空白详细规范: 精密固定电阻器 评定水平 F Fixed resistors for use in electronic equipment--Part 5: Blank detail specification:Fixed precision resistors--Assessment level F
电子设备用固定电阻器 第4部分: 空白详细规范: 功率型固定电阻器 评定水平 F Fixed resistors for use in electronic equipment--Part 4: Blank detail specification:Fixed power resistors--Assessment level F
印制板总规范 Generic specification printed boards
压电陶瓷电场 应变特性测试方法 Test methods of the properties of the relation between strain and electric field for piezoelectric ceramic
印制电路用限定燃烧性的覆铜箔聚酰亚胺玻璃布层压板 Polyimide woven glass fabric copper-clad laminated sheet of defined flammability for printed circuits
多层印制电路用限定燃烧性的薄覆铜箔聚酰亚胺玻璃布层压板 Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards
膜集成电路和混合膜集成电路分规范(采用能力批准程序〕 Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures
半导体器件 集成电路 第1部分: 总则 Semiconductor devices integrated circuits--Part 1: General
膜集成电路和混合膜集成电路空白详细规范(采用能力批准程序〕 Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of the capability approval procedures
电子设备用固定电容器 第19部分: 空白详细规范 金属化聚乙烯对苯二甲酸酯膜介质 直流片式固定电容器 评定水平E Fixed capacitora for use in electronic equipment--Part 19: Blank detail specification--Fixed metallized polyethylene-terephthalate film dielectric chip d.c.capacitors--Assessment level E
静电感应晶体管系列型谱 Series programmes for static induction transistors
抑制射频干扰固定电感器 第1部分 总规范 Fixed inductors for radio interference suppression--Part 1: Generic specification
抑制射频干扰固定电感器 第2部分 分规范 试验方法和一般要求的选择 Fixed inductors for radio interference suppression--Part 2: Sectional specification--Selection of methods of test and gederal requirements
电子设备用电位器 第5部分: 分规范 单圈旋转式低功率线绕和非线绕电位器 Potentiometers for use in electronic equipment--Part 5: Sectional specification: Single-turn rotary low-power wirewound and non-wirewound potentiometers
石英晶体元件 电子器件质量评定体系规范 第2部分: 分规范能力批准 Quartz crystal units--A specification in the quality assessment system for electronic components--Part 2: Sectional specification--Capability approval
石英晶体元件 电子元器件质量评定体系规范 第3部分: 分规范 鉴定批准 Quartz crystal units--A specification in the quality assessment system for electronic components--Part 3: Sectional specification--Qualification approval
圆形石英玻璃光掩模基板规范 Specification for round quartz photomask substrates
光掩模对准标记规范 Specification for registration marks for photomasks
塑料有引线片式载体封装引线框架规范 Specification of leadframes for plastic leaded chip carrier packages
封装引线间电容和引线负载电容测试方法 The method of measuring the lead-to-lead and loading capacitance of package leads
硬面感光板中光致抗蚀剂和电子束抗蚀剂规范 Specification for photoresist/E-beam resist for hard surface photoplates
压敏电阻器用氧化锌陶瓷材料 Zinc oxide ceramics for use in varistors
单模纤维光学器件回波损耗偏振依赖性测量方法 Measuring method for polarization dependence of return loss of a single-mode fibre optic component
介电晶体介电性能的试验方法 Test method for dielectric properties of dielectric crystal
用于集成电路制造技术的检测图形单元规范 Specification for metrology pattern cells for integrated circuit manufacture
掩模曝光系统精密度和准确度的表示准则 Guidelines for precision and accuracy expression for mask writing equipment
光掩模缺陷分类和尺寸定义的准则 Guidelines for photomask defect classification and size definition
大于100A,环境和管壳额定的整流二极管(包括雪崩整流二极管)空白详细规范 Blank detail specification for rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, for currents greater than 100A
绝缘栅双极型晶体管测试方法 Measuring methods for insulated-gate bipolar transistor
绝缘栅双极型晶体管的词汇及文字符号 Terminology and letter symbols for insulated-gate bipolar transistor
半导体器件 集成电路 第2部分: 数字集成电路 第二篇HCMOS数字集成电路54/74HC、54/74HCT、54/74HCU系列族规范 Semiconductor devices integrated circuits--Part 2: Digital Integrated circuits Section two--Family specification for HCMOS digital integrated circuits,series 54/74HC,54/74HCT,54/74HCU
半导体器件 集成电路 第2部分: 数字集成电路 第三篇HCMOS数字集成电路54/74HC、54/74HCT、54/74HCU系列空白详细规范 Semiconductor devices integrated circuits--Part2: Digital Integrated circuits Section three--Blank detail specification for HCMOS digital integrated circuits series 54/74HC,54/74HCT,54/74HCU
电子设备用电位器 第4部分: 分规范 单圈旋转功率电位器 Potentiometers for use in electronic equipment Part 4--Sectional specification: Single-turn rotary power potentiometers
电子设备用电位器 第4部分: 空白详细规范 单圈旋转功率电位器 评定水平E Potentiometers for use in electronic equipment Part 4: Blank detail specification Single-turn rotary power potentiometers--Assessment level E
电子设备用电位器 第4部分: 空白详细规范: 单圈旋转功率电位器 评定水平F Potentiometers for use in electronic equipment Part 4: Blank detail specification--Single-turn rotary power potentiometers Assessment level F
电子设备用电位器 第5部分: 空白详细规范 单圈旋转低功率电位器 评定水平E Potentiometers for use in electronic equipment Part 5: Blank detail specification--Single-turn rotary low-power potentiometers Assessment level E
电子设备用电位器 第5部分: 空白详细规范: 单圈旋转低功率电位器 评定水平F Potentiometers for use in electronic equipment Part 5: Blank detail specification--Single-turn rotary low-power potentiometers Assessment level F
电子设备用固定电阻器 第2部分: 空白详细规范 低功率非线绕固定电阻器 评定水平F Fixed resistors for use in electronic equipment Part 2: Blank detail specification Fixed low-power non-wirewound resistors Assessment level F
电子设备用固定电阻器 第4部分: 空白详细规范 带散热器的功率型固定电阻器 评定水平H Fixed resistors for use in electronic equipment--Part 4: Blank detail specification--Fixed power resistors, heat-sink types--Assessment level H
电子设备用压电陶瓷滤波器 电子元器件质量评定体系规范 第1部分: 总规范 鉴定批准 Piezoelectric ceramic filters for use in electronic equipment A specification in the quality assessment system for electronic components-Part 1: Generic specification--Qualification approval
电子设备用固定电容器第18部分: 分规范 固体(MnO2)与非固体电解质片式铝固定电容器 Fixed capacitors for use in electronic equipment--Part 18: Sectional specification: Fixed aluminium electrolytic chip capacitors with solid (MnO2)and non-solid electrolyte
电子设备用固定电容 第18部分: 空白详细规范 固体(MnO2)电解质片式铝固定电容器 评定水平E Fixed capacitors for use in electronic equipment--Part 18: Blank detail specification--Fixed aluminium electrolytic chip capacitors with solid (MnO2)electrolyte--Assessmentlevel E
电子设备用固定电容器 第18部分: 空白详细规范 非固体电解质片式铝固定电容器 评定水平E Fixed capacitors for use in electronic equipment--Part 18: Blank detail specification--Fixed aluminium electrolytic chip capacitors with non-solid electrolyte--Assessment level E
电子设备用机电开关 第2部分: 旋转开关分规范 Electromechanical switches for use in electronic equipment--Part 2: Sectional specification for rotary switches
电子设备用机电开关 第2部分: 空白详细规范 旋转开关 Electromechanical switches for use in electronic equipment--Part 2:Blank detail specification: for rotary switches
红外焦平面阵列特性参数测试技术规范 The technical norms for measurement and test of characteristic parameters of infrared focal plane arrays
频率低于3MHz的矩形连接器 第1部分: 总规范--一般要求和编制有质量评定要求的连接器详细规范的导则 Rectangular connectors for frequencies below 3MHz Part 1: Generic specification--General requirements and quide for the preparation of detail specifications,for connectors with assessed quality
电气元器件的标准数据元素类型和相关分类模式 第1部分: 定义-原则和方法 Standard data element types with associated classification scheme for electric components--Part 1: Detinitions-Principles and methods
电气元器件的标准数据元素类型和相关分类模式 第2部分: EXPRESS字典模式 Standard data element types with associated classification scheme for electric components Part 2: EXPRESS Dictionary schema
电气元器件的标准数据元素类型和相关分类模式 第3部分:维护和确认的程序 Standard data element types with associated classification scheme for electric components--Part 3: Maintenance and validation procedures
电气元器件的标准数据元素类型和相关分类模式 第4部分: IEC标准数据元素类型、元器件类别和项的基准集 Standard data element types with associated classification scheme for electric components--Part 4: IEC reference collection of standard data element types,component classes and terms
半导体器件 集成电路 第2部分: 数字集成电路 第四篇工 CMOS数字集成电路 4000B和4000UB系列族规范 Semiconductor devices integratcd circuits Part 2: Digital integrated circuits Section four-Family specification for complementary MOS digital integrated circuits,scrics 4000B and 4000UB
半导体器件 分立器件和集成电路 第1部分: 总则 Semiconductor devices Discrete devices and integrated circuits Part 1: General
半导体器件 集成电路 第2部分: 数字集成电路 Semiconductor devices Integrated circuits Part 2: Digital integrated circuits
电力电子电容器 第1部分:总则 Power electronic capacitors--Part 1: General
电力电子电容器 第2部分:熔丝的隔离试验、破坏试验、自愈性试验及耐久性试验的要求 Power electronic capacitors--Part 2: Requirements for disconnecting test on fuses,destruction test,self-healing test and endurance test
钇钡铜氧(123相)超导薄膜临界温度Tc的直流电阻试验方法 The DC electric resistance test method for the critical temperature Tc of a YBa2 Cu3O7-δsuperconducting thin film
关键尺寸(CD)计量方法 CD Metrology procedures
焦深与最佳聚焦的测量规范 Specification for measuring depth of focus and best focus
掩模缺陷检查系统灵敏度分析所用的特制缺陷掩模和评估测量方法准则 Guideline for programmed defect masks and benchmark procedures for sensitivity analysis of mask defect inspection systems
标称电压1kV及以下交流电力系统用非自愈式并联电容器 第1部分: 总则--性能、试验和定额--安全要求--安装和运行导则 Shunt power capacitors of the non-self--healing type for a.c.systems having a rated voltage up to and including 1kV--Part 1: General--Performance,testing and rating--Safety requirements--Guide for installation and operation
标称电压1kV及以下交流电力系统用非自愈式并联电容器 第2部分: 老化试验和破坏试验 Shunt power capacitors of the non-self-healing type for a.c.systems having a rated voltage up to and including 1kV--Part 2: Ageing test and destruction test
标称电压1kV及以下交流电力系统用非自愈式并联电容器 第3部分: 内部熔丝 Shunt power capacitors of the non-self-healing type for a.c.systems having a rated voltage up to and including 1kV--Part 3: Internal fuses
半导体器件 集成电路 第3部分: 模拟集成电路 Semiconductor devices Integrated circuits--Part 3: Analogue integrated circuits
激光防护屏 Laser guards
有贯穿连接的挠性多层印制板规范 Specification for flexible multilayer printed boards with through conections
有贯穿连接的刚挠多层印制板规范 Specification for flex-rigid multilayer printed boards with through connections
激光产品的安全 生产者关于激光辐射安全的检查清单 Safety of laser products--Manufacturer's checklist for radiation safety of laser products
激光加工机械 金属切割的性能规范与标准检查程序 Laser processing machines--Performance specifications and benchmarks for cutting of metals
激光加工机械 安全要求 Laser processing machines--Safety requirements
电子设备用机电开关 第4部分: 钮子(倒扳)开关分规范 Electromechanical switches for use in electronic equipment Part 4: Sectional specification for lever(toggle) switches
半导体器件 集成电路 第4部分: 接口集成电路第一篇: 线性数字/模拟转换器(DAC)空白详细规范 Semiconductor devices Integrated circuits Part 4: Interface integrated circuits Section 1: Blank detail specification for linear digital-to-analogue converters(DAC)
半导体器件 集成电路 第4部分: 接口集成电路第二篇: 线性模拟/数字转换器(ADC)空白详细规范 Semiconductor devices Integrated circuits Part 4: Interface integrated circuits Section 2: Blank detail specification for linear analogue-to-digital converters(ADC)
有质量评定的直流和低频模拟及数字式高速数据处理设备用连接器 第1部分: 总规范 Connectors with assessed quality,for use in d.c.,low frequency analogue and in digital high speed data applications--Part 1: Generic specification
直流和低频模拟及数字式高速数据处理设备用连接器 第2部分: 有质量评定的圆形连接器分规范 Connectors for use in d.c.,low-frequency analogue and digital high speed data spplications--Part 2: Circular connectors with assessed quality--Sectional specification
银或银合金包套铋系氧化物超导体直流临界电流的测定 The DC critical current measurement for Ag or Ag-alloy sheathed bismuthal oxide superconductor
彩色电视接收机白场色温及其宽容度 Colour TV receiver - Colour temperature of white point - Reference white and it's tolerance
常用电信设备名词术语 General terminology for telecommunications equipment
电信设备通用文字符号 Letter symbols for telecommunication equipment
共电、自动电话机技术条件 Technical requirements for common battery telephones and automatic telephones
磁石电话机技术条件 Technical requirements for magnetotelephone
彩色电视图象传输标准 Standard of colour TV image transmission
国内电视插入测试行信号标准 Standard for insertion test signal of domestic TV
广播用单声道录音机基本参数和技术要求 Fundamental parameters and technical requirements for monophonic broadcast tape recorders
广播用单声道录音机测试方法 Measuring methods for characteristics of monophonic broadcast tape recorders
6.30mm广播录音磁带性能测试方法 Measuring methods for the properties of 6.30 mm broadcast audio tapes
6.30mm广播录音磁带最低性能要求 Minimum performance requirements of 6.30mm broadcast audio tapes
广播录音机测试用磁带 Test tape for broadcast tape recorders
广播录音基准带 Reference tape for broadcast recording
广播录音磁带的盘芯和带盘 Hub and reol spool of broadcast audio tape
广播节目(磁带录音)的录制和交换 The recording and exchange of broadcasting programs (magnetic tape sound recording)
中波广播网覆盖技术 Covering technique of the medium-wave broadcasting network
磁带录音机测量方法 Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
磁带录音机基本参数和技术要求 Fundamental parameters and technical requirements for audio tape recorders
彩色电视广播测试图 Colour television telecast--Test charts
模拟电唱盘通用技术条件 General specification for analog audio disk players
传真测试样张 Test chart for facsimile transmission
模拟微波接力通信系统网路接口基本技术要求 Technical requirements for network interface for the analogue microwave relay communication systems
调幅广播收音机测量方法 Methods of measurement on radio receivers for AM broadcast transmissions
文件传真二类机在电话网中互通技术条件 Technical requirements for group 2 document facsimile apparatus used in public telephone network
PAL-D制电视广播技术规范 Characteristics of PAL-D television broadcasting system
反射式彩条测试图 Reflection colour bar test card
反射式肤色测试图 Reflection flesh tone test card
透射式彩条测试图 Transparency colour bar test card
透射式肤色测试图 Transparency flesh tone test card
25.4毫米电视节目磁带的录制和交换 The recording and exchange of television programmes on 25.4mm video tape
倍频程和分数倍频程滤波器 Octave-band and fractional-octave-band filters
频率响应测试唱片 Frequency response test record
循迹能力、声道分隔度测试唱片 Tracking ability and channel separation test record
抖晃度测试唱片 Wow and flutter test record
转盘噪声测试唱片 Rumble measurement test record
电话自动交换网带内单频脉冲线路信号方式 Inband pulsing single frequency line signalling system for telephone automatic switching network
电话自动交换网多频记发器信号方式 Multifrequency register signalling system for telephone antomatic switching network
电话自动交换网用户信号方式 Subscriber line signalling system for telephone automatic switching network
电话自动交换网局间直流信号方式 Interoffice direct signalling system for telephone automatic switching network
电话自动交换网铃流和信号音 Ringing and tone for telephone automatic switching network
文件传真三类机在电话网中的互通技术条件 Technical requirements for group 3 facsimile apparatus used in public telephone network
电信传输单位分贝 Telecommunication transmission unit--decibel
模拟载波通信系统网路接口参数 Parameters of interface for the analogue carrier systems over the network
半导体集成电路 运算放大器系列和品种 Semiconductor integrated circuits--Series and products of operational amplifier
标准调音频率 Standard tuning frequency
非平衡双流接口电路的电特性 Electrical characteristics for unbalanced double-current interchange circuits
电视视频通道测试方法 Methods of measurement of television video channel
测量视频连续随机杂波用的统一加权网络 Unified weighting network for measuring video continuous random noise
雷达名词术语 The terms and definitions related to radar
盒式录音磁带尺寸及机械特性 Cassette for tape records-Dimensions and mechanical characteristics
通信设备产品包装通用技术条件 General specifications for products packaging of communication equipments
工业无线电干扰基本测量方法 General methods of measurement for industrial radio interference
电视三基色色度坐标测试方法 Test method of three primary colors chromaticity coordinates for TV
电话自动交换网局间中继数字型线路信号方式 Interoffice junction digital line signalling system for telephone automatic switching network
电话自动交换网多频记发器信号技术指标测试方法 The test methods for the technical specifications of multi-frequency register signalling for telephone automatic switching network
纵横制电话交换机用继电器 Relays for crossbar telephone switching systems
纵横接线器 Crossbar switches
大容量长距离模拟微波通信干线电话传输干扰容限 Telephone transmission interference allowanceo for longdistance high-capacity analogue microwave communication systems
录音录像术语 Terminology for audio and video recording
脉冲编码调制通信系统系列 Pulse code modulation communication system hierarchy
米波调频广播技术规范 Technical specifications for FM sound broadcasting at VHF
调频广播发射机技术参数和测量方法 单声和立体声 Technical parameters and measuring methods for FM broadcasting transmitters--Monophonic and stereophonic
调频广播发射机技术参数和测量方法 立体声带附加信道 Technical parameters and measuring methods for FM stereophonic broadcasting transmitters with supplementarychannel
调频广播发射机技术参数和测量方法 双节目 Technical parameters and measuring methods for FM broadcasting transmitters of dual programmes
家用和类似用途电动、电热器具、电动工具以及类似电器无线电干扰特性测量方法和允许值 Limies and methods of measurement of radio disturbancecharacteristics of electrical motor-operated and thermal appliances for house-hold and similar purposes,electric tools and similar electric apparatus
电磁兼容 家用电器、电动工具和类似器具的要求 第2部分:抗扰度 产品类标准 Electromagnetic compatibility--Requirements for household appliances,electric tools and similar apparatus--Part 2:Immunity--Product family
电信设备人工控制机构操作方向的标记 Signs of operating directions of manual control mechanism of telecommunication equipments
电磁兼容术语 Terminology for electromagnetic compatibility
模拟通信网中实际电路噪声与模拟系统负荷的电路噪声测试方法 Measuring methods for actual circuit noise and the circuit noise in simulating system loading over the analogue communication network
长途通信网频分制系统频率比较导频系列 Frequency comparison pilot series for the FDM systems in the toll communication network
工业、科学和医疗(ISM)射频设备电磁骚扰特性的测量方法和限值 Industrial,scientific and medical(ISM) radio-frequency equipment-Electromagnetic disturbance characteristics-Limits and methods of measurement
50比特/秒数据传输要求 Requirements of data transmission at 50 bit/s
电气设备的抗干扰特性基本测量方法 General methods of measurement of immunity to interference for electrical equipment
电视中间频率 Intermediate frequencies of television
地面无线电接力系统所用设备的测量方法 第一部分: 分系统和仿真系统通用的测量 第一节 总则 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 1: Measurements common to subsystems and simulated systems--Section One--General
地面无线电接力系统所用设备的测量方法 第三部分: 仿真系统的测量 第二节: 基带测量 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3: Simulated systems--Section two--Measurements in the basehand
地面无线电接力系统所用设备的测量方法 第三部分: 仿真系统的测量 第六节: 声音节目传输的测量 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3: Simulated systems--Section six--Measurements for sound-programme transmission
地面无线电接力系统所用设备的测量方法 第二部分: 分系统的测量 第一节 通则 Methods of measurement for equipment used in terrestrial radio-relay systems--part 2: Measurements for subsystems--Section one--General
地面无线电接力系统所用设备的测量方法 第二部分: 分系统的测量 第四节 频率调制机 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for subsystems--Section four--Frequency modulators
地面无线电接力系统所用设备的测量方法 第二部分: 分系统的测量 第五节 频率解调机 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for subsystems--Section five--Frequency demodulators
地面无线电接力系统所用设备的测量方法 第二部分: 分系统测量 第七节 发射机 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for subsystems--Section seven--Radio trsnsmitters
地面无线电接力系统所用设备的测量方法 第二部分: 分系统的测量 第八节 接收机 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for subsystems--Section eight--Radio receivers
地面无线电接力系统所用设备的测量方法 第二部分: 分系统的测量 第九节 备用通道倒换设备 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Mesurements for subsystems--Section nine--Stand-by channel switching eguipment
地面无线电接力系统所用设备的测量方法 第三部分: 仿真系统的测量 第一节 通则 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3: Simulated systems--Section one--General
地面无线电接力系统所用设备的测量方法 第三部分: 仿真系统的测量 第三节 黑白和彩色电视传输的测量 Methods of measurement for aquipment used in terrestrial radio-relay systems--Part 3: Simulated systems--Section three--Measurements for monochrome and colour television transmission
地面无线电接力系统所用设备的测量方法 第三部分: 仿真系统的测量 第四节 频分复用传输的测量 Methods of measurement for equipment used in terrestrial radio-relay systems--part 3: Simulated systems--Section four--Measurements for f.d.m. transmission
地面无线电接力系统所用设备的测量方法 第三部分: 仿真系统的测量 第五节 相互干扰的测量 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 3: Simulated systems--Section five--Measurement of mutual interference
地面无线电接力系统所用设备的测量方法 第一部分: 分系统和仿真无线电接力系统通用的测量 第二节 射频范围的测量 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 1: Measurements common to sub-systems and simulated radio-relay systems--Section 2: Measurements in the radio-frequency range
地面无线电接力系统所用设备的测量方法 第一部分: 分系统和仿真无线电接力系统通用的测量 第四节 基带范围的测量 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 1: Measurements common to sub-systems and simulated radio-relay systems--Section 4: Measurements in the baseband
地面无线电接力系统所用设备的测量方法 第二部分: 分系统的测量 第三节 射频分支网络 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for sub-systems--Section 3: R.F. branching networks
地面无线电接力系统所用设备的测量方法 第二部分: 分系统测量 第六节 分集、双路和热备用设备 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for sub-systems--Section 6: Diversity'twin-path and hot stand-by equipment
厅堂扩声特性测量方法 Methods of measurement for the characteristics of soundreinforcement in auditoria
广播报时信号 Time signal in radio broadcasting
话路传真 (三类机) 传输要求 Document facsimile (group 3) transmission requirement
单声和立体声节目传输特性和测量方法 Characteristics and measuring methods for monophonic and stereophonic transmissions
立体声广播节目(磁带)的录制和交换 The recording and exchanging of sound broadcasting programmes on stereophonic magnetic tape
广播用立体声录音机 Stereophonic broadcast magnetic recorder
电话自动交换网带内单频脉冲线路信号技术指标测试方法 The test methods for the technical specifications of inband pulsing single frequency line signalling systemfor automatic telephone switching network
电话自动交换网铃流和信号音技术指标测试方法 The test methods for the technical specifications of ringing and tone for automatic telephone switching network
电话自动交换网用户信号技术指标测试方法 The test methods for the technical specifications of subscriber line signalling for automatic telephone switching network
75波特/180Hz调频音频电报机技术要求和测试方法 Specification and measuring method of frequency-modulated voice-frequency telegraph set for a modulation rate of 75 Bauds with channels spaced at 180 Hz
透射式电视偏转畸变测试图 Defection distortion test chart of transparencies for television
无线电骚扰和抗扰度测量方法 Methods of measurement of radio disturbance and immunity
调频广播接收机测量方法 Methods of measurement on radio receivers for FM broadcast transmissions
各种发射类型的无线电接收机的测量方法 第9部分: 广播数据系统接收特性的测量 Methods of measurement on radio receivers for various classes of emission Part 9: Measurement of the characteristics relevant to radio data system (RDS) reception
电视发射机测量方法 Methods of measurement for television transmitters
模拟节目信号 Simulated programme signal
25~1000MHz陆地移动通信网的容量系列及频道配置 Capacity series and frequency channels arrangement in 25 to 1000MHz land mobile telecommunication network
陆地移动业务 (16kOF3E)所要求的同波道干扰标准 Co-channel interference standards required in the land mobile services (16kOF3E)
25~1000MHz陆地移动通信网通过用户线接入公用通信网的接口参数 Interface parameters of the 25 to 1000MHz land mobile telecommunication network connecting to public telecommunication network through subscriber lines
微波接力通信系统 抛物面天线型谱系列 Series of type-spectrums for parabolic antennas used in microwave relay communication systems
文件传真质量主观评定方法 Method for the subjective assessment of the quality of document facsimile
人工混响装置测量方法 Methods of measurement for artificial reverberation equipment
时间延迟和移频装置测量方法 Methods of measurement on time delay and frequency shift equipment
电视和声音信号的电缆分配系统 Cabled distribution systems primarily intended for television and sound signals
采用互易技术对φ23.77mm 标准电容传声器进行自由场校准的精密方法 Precision method for free-field calibration of φ 23.77mm standard condenser microphones by the reciprocity technique
通用硬同轴传输线及其法兰连接器总规范 General purpose rigid coaxial transmission lines and their associated f, lange connectors--Generic specification
助听器电声特性的测量方法 Measurement of electroacoustic characteristics of hearing aids
具有感应拾音线圈输入的助听器电声特性的测量方法 Measurement of electroacoustical characteristics of hearing aids with induction pick-up coil input
具有自动增益控制电路的助听器电声特性的测量方法 Measurement of electroacoustical characteristics of hearing aids with automatic gain control circuits
插入式耳机的乳头状接头 Nipples for insert earphones
地面无线电接力系统所用设备的测量方法 第一部分: 分系统和仿真系统通用的测量 第三节: 中频范围的测量 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 1: Measurements common to sub-systems and simulated systems--Section three--Measurements in the intermediate-frequency range
地面无线电接力系统所用设备的测量方法 第二部分: 分系统的测量 第二节 天线和无源转向器的测量 Methods of measurement for equipment used in terrestrial radio-relay systems--Part 2: Measurements for sub-systems--Section two: measurements in the antennas and passive repeaters
电信线路遭受强电线路危险影响的容许值 The tolerable limits of danger on telecommunication lines from power lines
头戴耳机测量方法 Methods of measurement on headphones
2048 kbit/s 30路脉码调制复用设备技术要求和测试方法 Performance and test methods of the 30 channels pulse code modulation multiplex equipment at 2048 kbit/s
短波单边带发射机电性能测量方法 Methods of measurement of electrical performance for short wave single-sideband transmitters
短波单边带接收机电性能测量方法 Methods of measurement of electrical performance for short wave single-sideband receivers
透射式电视综合测试图 Multiple test chart of transparencies for television
透射式电视线性测试图 A型 Linear test chart A of transparencies for television
透射式电视线性测试图 B型 Linear test chart B of transparencies for television
透射式电视高频特性测试图 High-frequency test chart of transparencies for television
透射式电视高分辨率测试图 High resolution test chart of transparencies for television
透射式电视棋盘格测试图 Checkerboard test chart of transparencies for television
透射式电视调制度测试图 Amplitude response test chart of transparencies for television
透射式电视重合测试图 A型 Registration test chart A of transparencies for television
透射式电视重合测试图 B型 Registration test chart B of transparencies for television
透射式电视均匀性测试图 Quality of distribution test chart of transparencies for television
透射式电视区域测试图 Circular zone test chart of transparencies for television
透射式电视灰度测试图 A 型 Grayscale test chart of A transparencies for television
透射式电视灰度测试图 B型 Grayscale test chart B of transparencies for television
8448 kbit/s 正码速调整二次群数字复用设备技术要求和测试方法 Performance and methods of the second order digital muplex equipment operating at 8448 kbit/s and using positive justification
单边带电力线载波机 Single sideband power-line carrier terminals
公路通信技术要求及设备配备 总则 Technical requirements and arrangement of equipment for highway communication general
公路通信技术要求及设备配备 设备配备 Technical requirements and arrangement of equipment for highway communication Arrangement of equipment
公路通信技术要求及设备配备 组网技术要求 Technical requirements and arrangement of equipment for highway communication Technical requirement of network
盒式录音磁带通用规范 General specification for audio cassettes
高保真扬声器系统最低性能要求及测量方法 Minimum performance requirements and methods of measurement for high fidelity loudspeaker systems
电力线载波结合设备 Coupling devices for power line carrier systems
交流电力系统阻波器 Line traps for a.c. power systems
高压架空输电线、变电站无线电干扰测量方法 Methods of measurement of radio interference from highvoltage overhead power transmission lines and substations
声音和电视信号的电缆分配系统输出口基本尺寸 Basic size of outlet of cable distribution systems intended for sound and television signals
600~9600 bit/s基带调制解调器技术要求 Requirements of 600~9600 bit/s baseband modem
600~9600 bit/s 基带调制解调器的测量方法 Test methods of 600~9600 bit/s baseband modem
电视差转机测量方法 Methods of measurement for television transposers
非广播磁带录像机测量方法 Measuring methods for non-broadcast video tape recorde
非广播磁带录象机测量方法 第3部分: FM记录的音频特性 Measuring methods for non-broadcast videotape recorders Part 3: Audio characteristics for FM recording
非广播磁带录象机测量方法 第5部分: 宽带录象机--包括具有Y/C视频连接器的宽带录象机(PAL/NTSC) Non-broadcast video tape recorders--Methods of measurement--Part 5: High-band video tape recorders including those equipped with Y/C video connectors (PAL/NTSC)
U 型19mm螺旋扫描盒式磁带录像系统 Helical-scan video-tape cassette system using 19mm magnetic tape, known as U-format
VHS 型12.65mm 螺旋扫描盒式磁带录像系统 Helical-scan vibeo tape cassette system using 12.65mm magnetic tape on type VHS
S-VHS型12.65mm螺旋扫描盒式磁带录像系统 Helical-scan video tape cassette system using 12.65mm magnetic tape on type S-VHS
广播电视名词术语 通用部分 Broadcasting and televition terminology--General terms
广播电视名词术语 无线电广播 Broadcasting and television terminology--Radio broadcasting
广播电视名词术语 有线广播 Broadcasting and television terminology--Wired broadcasting
广播电视名词术语 卫星广播 Broadcasting and television terminology--Satellite broadcasting
广播电视名词术语 声音广播 通用部分 Broadcasting and television terminology--Sound broadcasting--General terms
广播电视名词术语 电视广播 通用部分 Broadcasting and television terminology--Television broadcasting--General terms
广播电视名词术语 电视广播 视觉与图象质量 Broadcasting and television terminology--Television broadcasting--Visual and picture quality
广播电视名词术语 电视广播 信号及其特性 Broadcasting and television terminology--Television broadcasting--Signal and their attributes
广播电视名词术语 电视广播 电视技术 Broadcasting and television terminology--Television broadcasting--Techniques
广视电视名词术语 电视广播 电视设备 Broadcasting and television terminology--Television broadcasting--Equipment
数字电视术语 Digital television terminology
广播电视名词术语 电视广播 视频测量仪器和技术 Broadcasting and television terminology--Television broadcasting--Test equipment and test techniques
彩色电视图像质量主观评价方法 Method for subjective assessment of quality of colour television pictures
利用电视信号传送标准时间频率 Time and frequncy dissemination via television signals
光缆 第1部分: 总规范 Optical fibre cables Part 1: Generic specification
16mm磁片上两声轨磁头隙缝的位置和宽度尺寸 Head gaps for two sound records on 16mm magnetic film--Positions and width dimensions
同轴电缆载波通信系统抗无线电广播和通信干扰的指标 Immunity specification of coaxial cable carrier system to the interference from the radio broadcasting and telecommunication
对称电缆载波通信系统抗无线电广播和通信干扰的指标 Immunity specification of symmetrical cable carrier system to the interference from the radio broadcasting and telecommunication
架空明线载波通信系统抗无线电广播和通信干扰的指标 Immunity specification of open wire carrier system to the interference from the radio broadcasting and telecommunication
在模拟电话电路上开放电报及低速数据的时分复用设备技术要求 Specifications of TDM equipment operating on an analog telephone-type circuit for telegraph and lower-speed data
国家通信网用户电报及低速数据编号 Numbering for telex and low speed data in national communication network
通信明线传输参数的计算方法和测试方法 Calculating methods and measuring methods for transmission parameters of open-wire communication lines
电报用五单位数字保护码 Protected 5-unit numerical code for telegram service
明线12路载波系统进网特性要求 General characteristics complying with the network performance objectives for 12 channel carrier telephone systems on open-wire pairs
对称电缆60路载波系统进网特性要求 General characteristics complying with the network performance objectives for 60 channel carrier telephone systems on symmetric cable pairs
1.2/4.4mm标准同轴电缆300路载波系统进网特性要求 General characteristics complying with the network performance objectives for 300 channel carrier telephone systems on standardized 1.2/4.4mm coaxial cable pairs
模拟微波接力通信系统容量系列及波道配置 Capacity series and radio-frequency channel arrangement for analog microwave relay systems
电信网中脉冲编码调制音频通路传输特性常用测试方法 General test method for transmission performance of PCM voice channel in telecommunication network
音频脉冲编码调制特性 Characteristics of pulse code modulation for voice-frequencies
数字网系列比特率电接口特性 Characteristics of the electrical interface at hierarchical bit rate for digital network
校准测耳机用的宽频带型仿真耳 An artificial ear of wide band type for the calibration of earphones used in audiometry
共用天线电视系统 天线部分 CATV System--Antenna part
在电话线路上数据传输的功率电平 Power levels for data transmission over telephone lines
在数据通信领域中通常同集成电路设备一起使用的非平衡双流接口电路的电气特性 Electrical characteristics for unbalanced double-current interchange circuits for general use with integrated circuit equipment in the field of data communications
在数据通信领域中通常同集成电路设备一起使用的平衡双流接口电路的电气特性 Electrical characteristics for balanced double-current interchange circuits for general use with integrated circuit equipment in the field of data communications
在电话自动交换网上使用的标准化300比特/秒全双工调制解调器 300 bits per second duplex modem standardized for use in the general switched telephone network
在电话自动交换网和点对点二线租用电话型电路上使用的标准化的1200比特/秒双工调制解调器 1200 bits per second duplex modem standardized for use in the general switched telephone network and on point-to-point 2-wire leased telephone circuits
在电话自动交换网上使用的标准化600/1200波特调制解调器 600/1200baud modem standardized for use in the general switched telephone network
在电话自动交换网上的自动应答设备和(或)并行自动呼叫设备, 包括人工和自动建立呼叫时使回波控制装置停止工作的规程 Automatic answering equipment and/or parallel automatic calling equipment on the general switched telephone network, including procedures for bling of echo control devices for both manually and automatically estalished calls
在四线租用电话型电路上使用的标准化2400比特/ 秒调制解调器 2400 bits per second modem standardized for use on 4 wire leased telephone type circuits
在电话自动交换网上使用的标准化 2400/1200比特/ 秒调制解调器 2400/1200 bits per second modem standardized for use in the general switched telephone network
在租用电话型电路上使用的带人工均衡器的标准化的4800比特/ 秒调制解调器 4800 bits per second modem with manual equalizer standardized for use on leased telephone-type circuits
数据传输用失真和差错率测量仪的特性 Characteristics of distortion and error-rate measuring apparatus for data transmission
长途电话半自动对端设备技术要求和测试方法 Technical requirements and test methods for semi-automatic toll terminal equipment
调频广播差转机技术参数和测量方法 单声和立体声 Technical parameters and measuring mthods for FM broadcasting transposer--Monophonic and stereophonic
调频广播差转机技术参数和测量方法 立体声带附加信道 Technical parameters and measuring methods for FM stereophonic broadcasting transposer with supplementary channel
调频广播差转机技术参数和测量方法 双节目 Technical parameters and measuring methods for FM broadcasting transposer two program
光纤的环境性能试验方法 总则 Test methods for environmental properties of optical fibres--General
光纤的环境性能试验方法 温度循环 Test methods for environmental properties of optical fibres--Temperature cycling
光缆的环境性能试验方法 低温下卷绕 Test methods for the environmental properties of optical fibre cables--Winding at low temperature
盒式磁带录音机磁头总技术条件 General specification for magnetic heads for cassette tape recorders
视频磁头和上鼓组件基本参数及测量方法 Basic parameters and measuring methods of video heads upper cylinders
电视广播接收机 电子式调谐器基本参数及测量方法 Basic parameters and methods of measurement on electronic tuner for receivers for television broadcast transmissions
调频接收机中间频率 Intermediate frequency of FM receivers
调频广播编码器技术参数和测量方法 立体声 Technical parameters and measuring methods for FM broadcasting coder--Stereophonic
调频广播编码器技术参数和测量方法 附加声道 Technical parameters and measuring methods for FM broadcasting coder--Supplementary channel
调频广播编码器技术参数和测量方法 双节目 Technical parameters and measuring methods for FM broadcasting coder--Two programs
调频、电视广播接收机用300Ω/75Ω 平衡-不平衡阻抗变换器 300Ω/75Ω balun for FM and TV broadcast receiver
声频放大器测量方法 Method of measurement on audio amplifier
音频、视频和视听设备及系统词汇 Vocabulary for audio, video and audiovisual equipment and systems
调音台基本特性测量方法 Mothods of measurement for the fundamental characteristics of mixing console
视频同轴连接器总规范 Visual-frequency--Coaxial connectors, generic specification of
30MHz~1GHz声音和电视信号的电缆分配系统 机电配接值 Cabled distribution systems primarily intended for sound and television signals operating between 30 MHz and 1 GHz--Electrical and mechanical matching values
指点信标性能要求和测试方法 Performance requirements and test methods for marker beacon
无方向信标性能要求和测试方法 Performance requirements and test methods for non-directional radio beacon
录放音设备抖晃测量方法 Method of measurement of speed fluctuations in sound recording and reproducing equipment
家用声系统设备互连配接要求 Requirements for the interconnection and matching of household sound system equipment
脉冲式按键电活机技术要求 Performance requirements of pushbutton telephone with pulse
电话用脉冲式按键号盘技术要求 Performance requirements of pushbutton dialer with pulse
双音多频式按键电话机技术要求 Performance requirements of pushbutton telephone with DTMF
电话用双音多频式按键号盘技术要求 Performance requirements of pushbutton dialer with DTMF
相片传真机技术条件 Photographic facsimile apparatus--Specifications
相片传真机测试方法 Photographic facsimile apparatus--Measuring methods
10kHz~18.6MHz 传输测试仪技术条件 Technical condition for transmission measuring set 10 kHz to 18.6 MHz
4GHz 960路电话/ 彩色电视模拟微波接力通信设备总技术条件 General specifications for 4GHz 960 telephone channel/colour TV analog radio relay communication equipments
模拟微波接力通信系统8GHz微波通信设备总技术条件 General specifications for 8GHz band microwave communication equipment used in analogue radio-relay systems
无线电发射设备安全要求 Safety requirements for radio transmitting equipment
信息技术设备的无线电骚扰限值和测量方法 Information technology equipment--Radio disturbance characteristics--Limits and methods of measurement
双伴音/立体声电视广播 Dual sound/stereophonic television broadcasting
6GHz1800路电话/彩色电视模拟地面微波接力系统总技术条件 General specifications for 6GHz 1800 telephone channels/colour TV used in analogue terrestrial radio-relay systems
C 格式螺旋扫描录像机通用技术要求 General technical requirements for type C helical video tape recorders
25.4mm录像磁带盘 Reels for 25.4mm video magnetic tape
电视广播接收机测量方法 Methods of measurement on receivers for television broadcast transmissions
声音广播接收机基本参数 Basic parameters for sound broadcasting receivers
收音机、录音机听音试验 Listening tests on radio receiver and/or tape recorder
中波和短波调幅广播发射机基本参数 Basic performance parameters for medium wave and shortwave AM broadcasting transmitters
中波和短波广播发射机测量方法 Methods of measurement for broadcasting transmitters used in MW or SW band
广播电视演播系统的视音频和脉冲设备安全要求 Safety requirements for video-audio and pulse equipment of broadcasting television studio system
电视广播接收机主观试验评价方法 Subjective tests and assessment for broadcasting television receivers
彩色电视广播接收机可靠性验证试验 贝叶斯方法 Bayes method of reliability demonstration testing for colour broadcasting TV receiver
声音和电视广播接收机及有关设备抗扰度限值和测量方法 Limits and methods of measurement of immunity characteristics of sound and television broadcast receivers and associated equipment
广播收音机、广播电视接收机、磁带录音机、声频功率放大器(扩音机)的环境试验要求和试验方法 Environmental testing requirements and methods for broadcasting receivers, broadcasting television receivers, tape recorders and audio amplifiers
无线传声器系统测量方法 Methods of measurement for wireless microphone systems
用红外辐射的声传输 Sound transmission using infrared radiation
导航术语 Terminology for navigation
船用雷达技术要求和使用要求 测试方法和要求的测试结果 Shipborne radar, technical and operation requirements--Method of testing and required test results
船用卫星/奥米加组合导航仪通用技术条件 General specification for marine satellite-omega integrated navigator
扬声器主要性能测试方法 Methods of measurement for main characteristics of loudspeakers
直接辐射式电动锥形扬声器通用规范 General specification for electrodynamic loudspeaker of director type
直接辐射式扬声器尺寸 Dimensions of director radiator loudspeaker
传声器测量方法 Methods of measurement for microphones
高保真传声器最低性能要求 Minimum performance requirements on high fidelity microphones
反射式灰度级测试图 The reflection grayscale test chart
微波接力通信馈线系统技术条件 Technical specifications of feeder systems for microwaverelay communication
34368 kbit/s 正码速调整三次群数字复用设备技术要求和测试方法 Performance and test methods of the third order digital multiplex equipment operating at 34368 kbit/s and using positive justification
长距离地面模拟微波接力系统 彩色电视调制机 (一路电视一路伴音) 技术条件 Specifications for colour TV modulation equipment (1 TV+1 sound program) used in long-haul terrestrial analog radio-relay systems
长距离地面模拟微波接力系统 彩色电视解调机 (一路电视一路伴音) 技术条件 Specifications for colour TV demodulation equipment(1 TV+1 sound program) used in long-haul terrestrial analog radio-relay systems
移动通信天线通用技术规范 General specification for antennas used in the mobile services
机载指点信标接收机性能要求 Performance requirements for airborne marker beacon receiver
用于60~108kHz基群电路的48 kbit/s数据传输的调制解调器 Modems for date transmission at 48 kilobits per second using 60~108 kHz group band circuits
用于60~108kHz基群电路的宽带调制解调器的测量方法 Methods of measurement of modems for wide band using 60~108 kHz group band circuits
同步数据传输数据信号速率高于72千比特/ 秒使用60~108 kHz基群电路的宽带调制解调器 Wideband modem for synchronous data transmission at a data signalling rate higher than 72 kbit/s using 60~108kHz group band circuits
在普通电话交换网和点对点二线租用电话型电路上使用标准化的回波抵消技术的2400比特/ 秒双工调制解调器 2400 bits per second duplex modem using the echo cancellation technique standardized for use on the general switched telephone network and on point-to-point 2 wire leased telephone-type-circuits
通信用单模光纤系列 The series of single mode optical fibres for telecommunication
通信用单模光纤系列 第1部分: 非色散位移单模光纤特性 The series of single-mode optical fibres for telecommunication Part 1: Characteristics of a dispersion unshifted single-mode optical fibre
通信用单模光纤系列 第2部分: 截止波长位移单模光纤特性 The series of single-mode optical fibres for telecommunication Part 2: Characteristics of a cut-off wavelength shifted single-mode optical fibre
通信用单模光纤系列 第3部分: 波长段扩展的非色散位移单模光纤特性 The series of single-mode optical fibres for telecommunication Part 3: Characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre
通信用单模光纤系列 第4部分: 色散位移单模光纤特性 The series of single-mode optical fibres for telecommunication Part 4: Characteristics of a dispersion shifted single-mode optical fibre
通信用单模光纤系列 第5部分: 非零色散位移单模光纤特性 The series of single-mode optical fibres for telecommunication Part 5: Characteristics of a non-zero dispersion shifted single-mode optical fibre
传真机技术要求 三类文件传真机 Requirements for facsimile apparatus--Group Ⅲ document facsimile apparatus
传真机测试方法 文件传真机(摸拟) Test procedure for facsimile apparatus--Documents facsimile (analogue)
传真机测试方法 文件传真机(数字) Test procedure for facsimile apparatus--Document facsimile (digital)
19mm螺旋扫描盒式磁带录像系统(U-matic H 格式) Helical-scan video cassette system using 19mm tape (U-matic H format)
彩色电视广播接收机通用技术条件 General specification on colour television broadcasting receivers
电声产品声音质量主观评价用节目源编辑制作规范 Specifications for the editing and production of programme source for subjective assessment of sound quality of electro-acoustic products
平衡电压数字接口电路的电气特性 Electrical characteristics of balanced voltage digital interface circuits
数据通信用数据终端设备和自动呼叫设备之间的接口 Interface between data terminal equipment and automatic calling equipment for data communication
600bit/s电报时分复用设备技术要求 Specifications of 600 bit/s TDM equipment for telegraph transmission
特定带宽特殊质量租用电路特性 Characteristics of special quality leased circuits with special bandwidth conditioning
基本带宽特殊质量租用电路特性 Characteristics of special quality leased ciucuits with basic bandwidth conditioning
卫星电视地球接收站测量方法 系统测量 Methods of measurement for satellite television earth receive-only station-System measurement
卫星电视地球接收站测量方法 天线测量 Methods of measurement for satellite television earth receive-only station Antenna measurement
卫星电视地球接收站测量方法 室外单元测量 Methods of measurement for satellite television earthreceive-only station-Door-out unit measurement
卫星电视地球接收站测量方法 室内单元测量 Methods of measurement for satellite television earth receive-only station-Door in-unit measurement
卫星通信地球站无线电设备测量方法 第一部分: 分系统和分系统组合通用的测量 第一节 总则 Methods of measurement for radio equipment used in satellite earth stations - Part 1: Measurements common to sub-systems and combinations of sub-systems - Section one: General
卫星通信地球站无线电设备测量方法 第一部分: 分系统和分系统组合通用的测量 第二节: 射频范围内的测量 Methods of measurement for radio equipment used in satellite earth stations - Part 1: Measurements common to sub-systems and combinations of sub-systems - Section two: Measurements in the r.f.range
卫星通信地球站无线电设备测量方法 第一部分: 分系统和分系统组合通用的测量 第三节: 中频范围内的测量 Methods of measurement for radio equipment used in satellite earth stations - Part 1: Measurements common to sub-systems and combinations of sub-systems - Section three: Measurements in the I.f.range
卫星通信地球站无线电设备测量方法 第一部分: 分系统和分系统组合通用的测量 第四节: 基带测量 Methods of measurement for radio equipment used in satellite earth stations - Part 1: Measurements common to sub-systems and combinations of sub-systems - Section four: Measurements in the base band
卫星通信地球站无线电设备测量方法 第一部分: 分系统和分系统组合通用的测量 第五节: 噪声温度测量 Methods of measurement for radio equipment used in satellite earth stations - Part 1: Measurements common to sub-systems and combinations of sub-systems - Section five: Noise temperature measurements
卫星通信地球站无线电设备测量方法 第二部分: 分系统测量 第一节: 概述 第二节: 天线(包括馈源网络) Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section one: General and section two: Antenna(inculuding feed network)
卫星通信地球站无线电设备测量方法 第二部分: 分系统测量 第三节: 低噪声放大器 Methods of measurement for radio equipment used in satellite earth stations - Part 2: Sub-systems measurements - Section three: Low noise amplifier
卫星通信地球站无线电设备测量方法 第二部分: 分系统测量 第四节: 上变频器和下变频器 Methods of measuremant for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section four: Up and down converters
卫星通信地球站无线电设备测量方法 第二部分: 分系统测量 第七节: 频率调制器 第八节: 频率解调器 Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section seven: Frequency demodulators--Section eight: Frequency demodulators
卫星通信地球站无线电设备测量方法 第二部分: 分系统测量 第十节: 高功率放大器 Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section ten: High-power amplifier
卫星通信地球站无线电设备测量方法 第三部分: 分系统组合测量 第一节: 概述 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement for combinations of sub-systems - Section one: General
卫星通信地球站无线电设备测量方法 第三部分: 分系统组合测量 第二节: 4~6GHz接收系统品质因数(G/T)测量 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurements for combination of sub-systems - Section two: Measurement of the figure of merit(G/T)of the receiving system in the 4GHz to 6GHz range
卫星通信地球站无线电设备测量方法 第三部分: 分系统组合测量 第三节: 频分多路复用传输的测量 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurements for combinations of sub-systems - Section three: Measurements for F.D.M. transmission
卫星通信地球站无线电设备测量方法 第三部分: 分系统组合测量 第四节: 黑白和彩色电视传输测量 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurements for combination of sub-systems - Section four: Measurement for monochrome and colour television transmission
卫星通信地球站无线电设备测量方法 第三部分: 分系统组合测量 第五节: 天线跟踪和控制 Methods of measurement for radio equipment used in satellite earth stations - Part 3: Methods of measurement for combinations of sub-systems - Section five: Antenna tracking and control
射频连接器 第1-1部分: 单或多系列空白详细规范 Radio-frequency connectors Part 1-1: Single,multi-series blank detail specification
射频连接器 第24部分: 75Ω电缆分配系统用螺纹连接射频同轴连接器(F型) Radio-frequency connectors Part 24: Radio-frequency coaxial connectors with screw coupling,typically for use in 75Ωcable distribution systems(Type F)
射频连接器 第33部分: BMA系列射频连接器分规范 Radio-frequency connectors Part 33: Sectional specification for series BMA r.f.connectors
电视和声音信号的电缆分配系统设备与部件 第1部分: 通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 1: Generic specifications
电视和声音信号的电缆分配系统设备与部件 第2部分: 导频信号发生器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 2: Generic specifications for pilot signals generator
电视和声音信号的电缆分配系统设备与部件 第3部分: 电视调制器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 3: Generic specifications for TV modulator
电视和声音信号的电缆分配系统设备与部件 第4部分: 频道处理器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 4: Generic specifications for channel processor
电视和声音信号的电缆分配系统设备与部件 第5部分: 频道变换器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 5: Generic specifications for channel converter
电视和声音信号的电缆分配系统设备与部件 第6部分: 混合器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 6: Generic specifications for combiners
电视和声音信号的电缆分配系统设备与部件 第7部分: 放大器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 7: Generic specifications for amplifier
电视和声音信号的电缆分配系统设备与部件 第8部分: 干线放大器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 8: Generic specifications for trunk amplifiers
电视和声音信号的电缆分配系统设备与部件 第9部分: 电源设备通用规范 Equipments and components used in cabled distribution systems primarily intended for television and television signals--Part 9: Generic specifications of equipments for power supply
电视和声音信号的电缆分配系统设备与部件 第10部分: 分配器和用户分支器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 10: Generic specifications for splitter and subscriber's tap
电视和声音信号的电缆分配系统设备与部件 第11部分: 衰减器、均衡器、滤波器和陷波器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 11: Generic specifications for attenuator, equalizer, filter and trap
电视和声音信号的电缆分配系统设备与部件 第12部分: 系统输出口通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 12: Generic specifications for system outlets
电视和声音信号的电缆分配系统设备与部件 第13部分: 接收机变换器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and sound signals--Part 13: Generic specifications for set top converter
电视和声音信号的电缆分配系统设备与部件 第14部分: 避雷器通用规范 Equipments and components used in cabled distribution systems primarily intended for television and television signals--Part 14: Generic specifications for arrester
波导元件模数尺寸选择指南 Guide for choosing modular dimensions for waveguide components
射频电缆 第0部分: 详细规范设计指南 第一篇 同轴电缆 Radio-frequency cables--Part 0: Guide to the design of detail specifications--Section 1--Coaxial cables
电缆分配系统用单同轴电缆一般要求和试验 General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
139264 kbit/s正码速调整四次群数字复用设备技术要求和测试方法 Performance and test methods of the fourth order digitalmultiplex equimpent operating at 139264 kbit/s and usingpositive justification
聚烯烃绝缘铝-聚烯烃粘结护套高频农村通信电缆 一般规定 High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath - General rules
聚烯烃绝缘铝-聚烯烃粘结护套高频农村通信电缆 铜芯非填充电缆 High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath - Unfilled cables with copper conductors
聚烯烃绝缘铝-聚烯烃粘结护套高频农村通信电缆 铜芯填充电缆 High frequency rural telecommunication cables with polyolefin insulation and laminated aluminium polyolefin sheath - Filled cables with copper conductors
短波广播网覆盖技术规定 Technical bases of HFBC coverage
发播航行警告、气象信息和紧急信息系统(NAVTEX)技术条件和使用要求 Technical specifications and operational requirements for the systems for promulgation of navigational and meteorological warnings and urgent information
卫星电视地球接收站通用技术条件 General specification for satellite television earth receive-Only station
国内卫星通信地球站总技术要求 第一部分: 通用要求 Domestic satellite communication earth stations - General technical requirements - Part 1: Common performance
国内卫星通信地球站总技术要求 第四部分: 电视 /调频载波通道 Domestic satellite communication earth stations--General technical requirements--Part 4: Television/ frequency modulation carrier channel
国内卫星通信地球站总技术要求 第五部分: 中速数据数字载波通道 Domestic satellite communication earth stations--General technical requirements--Part 5: Intermediate data rate(IDR) digital carriers
国内卫星通信地球站发射、接收和地面通信设备技术要求 第三部分: 电视/ 调频设备 Transmitter, receiver and ground communication equipment used in domestic satellite communi cation earth stations - Technical requirements?Part 3: Equipment for television/frequency modulation
国内卫星通信地球站发射、接收和地面通信设备技术要求 第4部分 中速数据传输设备 Transmitter,receiver and ground communication equipment used in domestic satellite communication earth stations--Technical requirements--Part 4: Intermediate data rate (IDR) transmission equipment
光学纤维面板测试方法 Methods of measurement of fibre-optic plates
波导法兰盘 第一部分: 一般要求 Flanges for waveguides - Part 1: General requirements
波导法兰盘 第二部分: 普通矩形波导法兰盘规范 Flanges for waveguides - Part 2: Relevant specification for flanges for ordinary rectangular waveguides
波导法兰盘 第三部分: 扁矩形波导法兰盘规范 Flanges for waveguides - Part 3: Relevant specifications for flanges for flat rectangular waveguides
波导法兰盘 第四部分:圆形波导法兰盘规范 Flanges for waveguides - Part 4: Relevant specification for flanges for circular waveguides
波导法兰盘 第六部分: 中等扁矩形波导法兰盘规范 Flanges for waveguides - Part 6: Relevant specification for flanges for medium flat rectangular waveguides
波导法兰盘 第七部分: 方形波导法兰盘规范 Flanges for waveguides - Part 7: Relevant specification for flanges for square waveguides
空心金属波导 第一部分: 一般要求和测量方法 Hollow metallic waveguides - Part 1: General requirement and measuring methods
空心金属波导 第二部分:普通矩形波导有关规范 Hollow metallic waveguides - Part 2: Relevant specifications for ordinary rectangular waveguides
空心金属波导 第三部分: 扁矩形波导有关规范 Hollow metallic waveguides - Part 3: Relevant specifications for flate rectangular waveguides
空心金属波导 第四部分: 圆形波导有关规范 Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides
空心金属波导 第六部分: 中等扁矩形波导有关规范 Hollow metallic waveguides - Part 6: Relevant specifications for medium flat rectangular waveguides
空心金属波导 第七部分: 方形波导有关规范 Hollow metallic waveguides - Part 7: Relevant specifications for square waveguides
软波导组件性能 Flexible waveguide assembly performance
265 无线电高度表 265 Radio altimeter
无线电高度表通用技术条件 General specification for radio altimeters
公用数据网和综合业务数字网(ISDN)的国际用户业务类别和接入种类 International user classes of service in,and categories of access to,public data networks and integrated services digital networks(ISDNs)
公用数据网与ISDN网的国际数据传输业务和任选用户设施 International data transmission services and optional user facilities in public data networks and ISDNs
公用数据网中的分组装拆(PAD)设施 Packet assembly/disassembly facility(PAD) in a public data network
公用数据网上起/止传输业务使用的数据终端设备(DTE)和数据电路终结设备 (DCE)间的接口 Interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) for start stop transmission services on public data networks
公用数据网上同步工作的数据终端设备(DTE)和数据电路终接设备(DCE)间的接口 Interface between data terminal equipment and data circuit-terminating equipment for synchronous operation on public data networks
公用数据网上数据终端设备(DTE)与数据电路终接设备(DCE)间的互换电路定义表 List of definitions for interchange circuits between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) on public data networks
用专用电路连接到公用数据网上的分组式数据终端设备(DTE)与数据电路终接设备(DCE)之间的接口 Interface between data terminal equipment(DTE) and data circuit-terminating equipment (DCE) for terminals operating in the packet mode and connected to public data networks by dediccated circuit
起止式数据终端进入本国公用数据网的分组装拆(PAD)设施的DCE/DTE之间的接口 DCE/DTE interface for a start-stop mode data terminal equipment accessing the packet assembly/disassembly facility (PAD) in a pubic data network situated in the same country
在分组装拆(PAD)设施与分组式DTE或与另一个PAD之间交换控制信息和用户数据的规程 Procedure for the exchange of control information and user data between a packet assembly/disassembly (PAD) facility and a packet mode DTE or another PAD
提供数据传输业务的公用网之间的分组交换信令系统 Packet-switched signalling system between public networks providing data transmission services
与同步V系列调制解调器接口的数据终端设备(DTE)在公用数据网上的用法 Use on public data networks of data terminal equipment (DTE) which is designed for interfacing to synchronousV-series MODEMS
与异步双工V系列调制解调器接口的数据终端设备(DTE)在公用数据网上的用法 Use on public data networks of data terminal equipment ( DTE ) which is designed for interfacing to asynchronous duplex V-series MODEMS
高压电器设备无线电干扰测试方法 Test methods for measuring radio interference from high voltage equipment
探查松脱零件的音响监测系统的特性、设计和运行程序 Acoustic monitoring systems for loose parts detection - Characteristics, design and operational procedures
市内光缆通信系统进网要求 The requirements for urban optical fiber cable systems joined to national public telecommunication network
高速复制录音磁带 High-speed duplicate audio tape
彩色及黑白电视广播接收机电耗限定值及测试方法 The limited value and testing method of electrical energy consumption for broadcasting receiver of colour and monochromic television
收录音机效率限定值及测量方法 The limited value of efficiency and methods of measurement on radio receivers and recorder
无线电发射的标识及必要带宽的确定 Designation of radio emissions and determination of necessary bandwidths
多节目静止图像广播系统 Multiprogramme still picture broadcasting system
数字网内时钟和同步设备的进网要求 Requirements for clock and synchronization equipment used in the digital network
扬声器听音试验 Listening tests on loudspeakers
声系统设备 一般术语解释和计算方法 Sound system equipment explanation of general terms and calculation methods
高保真声频组合设备最低性能要求 Minimum performance requirements on high fidelity audio combination equipment
船用导航雷达湖岸试验方法 Bank based test method of the operational performance of marine radar
空中交通管制航路监视一次雷达通用技术条件 General specifications of primary enroute surveillance radar for air traffic control
盒式磁带录音机可靠性要求和试验方法 Reliability requirements and testing methods for cassette tape recorders
非平衡电压数字接口电路的电气特性 Electrical characteristics of unbalanced voltage digital interface circuits
TDM/FDM 60路复用转换设备进网要求 Specification for TDM/FDM 60-channel transmultiplexing equipments used in the telecommunication network
空中交通管制二次监视雷达通用技术条件 General specification of secondary surveillance radar for air traffic control
空中交通管制机载应答机通用技术条件 General specification of airborne transponders for air traffic control
中波调幅广播激励器通用技术条件 General specification for exciter used to MW AM broadcast transmitter
电视广播激励器通用技术条件 General specification for television broadcasting exciter
移动通信调频无线电话发射机测量方法 Methods of measurement for radio transmitters employing F3E emission used in the mobile services
移动通信调频无线电话接收机测量方法 Methods of measurement for radio receivers employing F3E emission used in the mobile services
脉冲式按键电话机测试方法 Methods of measurement for pushbutton telephone with pulse
电话用脉冲式按键号盘测试方法 Methods of measurement for pushbutton dialer with pulse
双音多频式按键电话机测试方法 Methods of measurement for pushbutton telephone with DTMF
电话用双音多频式按键号盘测试方法 Methods of measurement for pushbutton dialer with DTMF
非广播盒式磁带录像机环境要求和试验方法 Environmental testing requirements and methods for non-broadcast video tape recorders
射频电缆总规范 Generic specification for radio-frequency cables
彩色电视广播接收机与其他设备互连配接要求 Requirements for the interconnections and matching of color television broadcast receivers and other equipment
通用型应用电视设备可靠性试验方法 Methods of reliability testing for universal CCTV systems
电视接收机与电缆分配系统兼容的技术要求 Technical requirements of compatibility for television receivers with cable distribution systems
黑白通用型应用电视摄像机测量方法 Methods of measurement for monochrome universal CCTV camera
通信用多模光纤系列 The series of multimode optical fibres for telecommunication
国内卫星通信系统进网技术要求 Networking technical requirement for the domestic satellite communication systems
广播电视短程光缆传输技术参数 Technical parameters for short distance optical cable transmission of broadcasting and television
国内卫星通信地球站天线(含馈源网络)和伺服系统设备技术要求 Specification of antenna (including feed network) and servo system used in domestic satellite communication earth stations
以专用连接线方式互连的声音和电视广播发射设备与监控设备之间的接口 Interface for using dedicated interconnections between sound and television broadcasting transmitting equipment and supervisory equipment
铷原子频率标准通用技术条件 Generic specification of rubidium frequency standards
铷原子频率标准测试方法 Measuring methods for rubidium frequency standards
测风雷达通用技术条件 Generic specification for windfinding radars
光纤光缆连接器 第1部分: 总规范 Connectors for optical fibres and cables Part 1: Generic specification
国内卫星通信地球站地面接口要求 Requirements of terrestrial interface for domestic satellite communications carth stations
声音和电视广播发射设备信号链接口 Interface for signal chain of sound and television broadcasting transmitting equipments
发射机频率容限 Frequency tolerance for transmitter
通信卫星有效载荷性能的在轨测试方法 Methods of in-orbit testing for communication satellite payload performances
数字微波接力通信设备测量方法 Methods of measurement for the digital microwave radio relay communication equipments
视听、视频和电视设备及系统维护与操作的安全要求 Safe handling and operation of audiovisual, video and television equipment and systems
通用型应用电视制式 Universal applied TV system
天气雷达通用技术条件 Generic specification for weather radars
气象雷达参数测试方法 Measuring methods for meteorological radar parameters
奥米加和差奥米加系统船用接收设备性能要求和试验方法 Performance requirements and methods of testing for OMEGA system and differential OMEGA system receiving equipments for ships
电视同步期传一路高质量声音的技术规范 The specification of one channel high quality sound in sync
船用罗兰C 接收设备通用技术条件 General specification for marine loran-C receiving equipment
同轴电气假负载总规范 General specification for coaxial line electrical dummy loads
盒式磁带录音机运带机构可靠性要求和试验方法 Reliability requirements and testing methods for tape transport mechanism of cassette tape recorders
盒式磁带录音机运带机构通用规范 Generic specification for the transport mechanism of cassette tape recorders
电视广播接收机在非标准广播信号条件下的测量方法 Methods of measurement under conditions different from broadcast signal standards on receivers for television broadcast transmissions
地面无线电导航设备环境要求和试验方法 Environment requirements and test methods for ground radio-navigation equipments
载波电话设备包装 Products packaging of carrier telephone equipment
汉字智能用户电报在公用电信网上的互通技术条件 终端设备 Specification for interworking of chinese ideogram teletex on public telecommunication networks?The terminal equipment
汉字智能用户电报在公用电信网上的互通技术条件 控制规程 Specification for interworking of chinese ideogram teletex on public telecommunication networks?Control procedures
汉字智能用户电报在公用电信网上的互通技术条件 运输服务 Specification for interworking of chinese ideogram teletex on public telecommunication networks?Transport service
市话用户环路载波设备技术条件 Specifications for the local subscriber loop carrier equipment
2.6/9.5 mm综合中同轴电缆高频四芯组或高频线对12路载波电话终端设备技术条件 Specification for 12-channel telephone carrier terminal equipment used on the symmetric pains of 2.6/9.5mm coaxial cable
数字交换机的时钟和同步设备进入数字网的兼容性测试方法 Compatibility test procedures of clock and synchronization equipment of digital switch introduced into digital network
数字微波接力通信系统进网技术要求 Networking specifications for digital radio-relay systems
长途光缆通信系统进网要求 Requirements for long haul optical fiber cable systems joined to national public telecommunication network
标准2.6/9.5mm 同轴线对上8MHz (1800路) 载波通信系统总技术要求 General specification for 8MHz (1800ch) carrier systems on standardized 2.6/9.5mm coaxial cable pairs
标准1.2/4.4mm 同轴线对上4MHz (960路)载波通信系统总技术要求 General specification for 4MHz (960ch) carrier systems on standardized 1.2/4.4mm coaxial cable pairs
驼峰测速雷达 Radar speedometer for marshalling yard
机载多普勒导航系统通用技术条件 General specification for airborne doppler navigation systems
磁带录放音系统 一般条件与要求 Magnetic tape sound reoording and reproducing systems - General conditions and requirements
电视广播接收机机械式调谐器总技术条件 General specification for mechanical tuners of TV broa dcasting receivers
无线电发射机杂散发射功率电平的限值和测量方法 Limits of maximum permitted spurious emission power levels and methods of measurement for radio transmitters
24路海底同轴电缆载波电话设备测试方法 Measurement for 24-channels submarine coaxial cable carrier telephone equipment
数字通信设备的可靠性要求和试验方法 Reliability requirements and test methods for digital communication equipment
增量调制终端设备技术要求 Performance requirement of the delta medulation eouipment
增量调制终端设备测量方法 Methods of measurement for the delta modulation equipment
120 路海底同轴电缆载波电话设备测试方法 Measurement methods for 120-channel submarine coaxial cable carrier telephone equipment
24路海底同轴电缆载波电话设备技术要求 Performance requirements for 24-channel submarine coaxial cable carrier telephone equipment
120 路海底同轴电缆载波电话设备技术要求 Performance requirements for 120-channel submarine coaxial cable carrier telephone equipment
数字微波接力通信设备通用技术条件 Generic specification for digital microwave radio relay communication equipment
汉语清晰度诊断押韵测试(DRT)法 Diagnostic rhyme test (DRT) method of Chinese articulation
数字通信设备环境试验方法 Environmental test methods for digital communi cation equipments
高保真头戴耳机最低性能要求 Minimum performance requirements on high fidelity head phones
短波无线电测向台(站)电磁环境要求 Requirements of the electromagnetic environment for short-wave radio direction finding stations
地球站电磁环境保护要求 Electromagnetic environment protection requirements for earth stations
微波接力站电磁环境保护要求 Electromagnetic environment protection requirements for microwave relay stations
短波无线电收信台(站)电磁环境要求 Electromagnetic environment requirements for shortwave radio receiving stations
对空情报雷达站电磁环境防护要求 Requirements of electromagnetic enviroment protection for air defense surveillance radar station
微波接力通信系统干扰计算方法 Interference calculation methods for radio-relay systems
卫星通信地球站与地面微波站之间协调区的确定和干扰计算方法 Determination of coordination area and predication methods of interference between satellite communication earth station and terrestrial microwave station
100 - 1000MHz接力通信系统的容量系列波道配置及设备的主要技术要求 Capacity series and radio-frequency channel arrangement and equipment main technical specifications for 100 - 1000MHz radio relay communication systems
无线电管理术语 Terminology for radio regulation
国际海事卫星A船舶地球站技术要求 Technical requirements for INMARSAT A ship earth stations
纤维光学调制器 第一部分∶总规范 (可供认证用) Fibre optic modulators - Part 1:Generic specification
纤维光学分路器 第一部分∶总规范 (可供认证用) Fibre optic branching devices - Part 1:Generic specification
纤维光学分路器 第三部分∶分规范 1至n个波长复用器/解复用器 (可供认证用) Fiber optic branching devices - Part 3:Sectional specification - One-to-n wavelength multiplexer/demultiplexer
移动通信选择呼叫设备音频段和模拟系统测量方法 Methods of measurements of audio-frequency band andsimulated systems for selective calling equipment used in the mobile services
移动通信电源技术要求和试验方法 Performance requirements and testing methods for power supplies used in the mobile communication
电视和声音信号电缆分配系统 第2部分: 设备的电磁兼容 Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility of equipment
声音和电视广播接收机及有关设备无线电干扰特性限值和测量方法 Limits and methods of measurement of radio interference characteristics of sound and television broadcast receivers and associated equipment
通路传输自动测试设备技术条件 Specification for path transmission automatic measuring equipment
4GHz微波联络机技术条件 Specification for 4GHz band microwave service channel equipment
微波通信系统远程监控设备技术条件 Specification for microwave communication system remote supervisory and control equipment
中距离地面模拟无线电接力系统彩色电视调制机和解调机(1路电视和4路伴音)技术条件 Specification for colour TV modulation and demodulation equipment(1TV+4sound program)used in middle distance terrestrial analog radio-relay systems
中距离地面模拟无线电接力系统300 路电话调制机和解调机技术条件 Specification for 300 telephone channels modulation and demodulation equipment used in middle distance terrestrial analog radio-relay systems
2048 kbit/s 30路脉码调制分插设备技术要求与测试方法 Performance and test methods of 30 channels pulse code modulation drop/insert equipment at 2048 kbit/s
送话器测量方法 Measuring methods for transmitters
视频系统中21芯连接器的应用特性 Application characteristics for 21-pin connector in video systems
隔爆型防爆应用电视设备防爆性能试验方法 Test methods of explosion-proof performance for explosion-proof applied TV equipment with separate type
直流放大器特性和测试方法 Direct current amplifiers--Characteristics and test methods
通信光缆系列 总则 The series of optical fibre cables for telecommunication--General
通信光缆系列 第2部分: 干线和中继用室外光缆 The series of optical fibre cables for telecommunication--Part 2: Outdoor optical fibre cables for trunks and junctions
通信光缆系列 第3部分: 综合布线用室内光缆 The series of optical fiber cables for telecommunication Part 3: Indoor optical fiber cables for generic cabling
60路PCM/ADPCM编码转换设备技术要求 Technical requirements for a 60-channel PCM/ADPCM transcoder equipment
TDM/FDM 60路复用转换设备技术要求 Technical requirements for TDM/FDM 60-channel transmultiplexing equipment
光缆数字线路系统技术规范 Technical specification for digital line systems on optical fibre cables
2048kbit/s、8448kbit/s、34368kbit/s、139264kbit/s光端机技术要求 Technical requirement for 2048kbit/s,8448kbit/s,34368kbit/s,139264kbit/s optical line terminals
电信线路磁感应纵电动势和对地电压、电感应电流及杂音计电压的测量方法 Measuring methods of the magnetic induced longitudinal EMF, magnetic induced voltage with respect to earth, electric induced current and psophometric voltage on telecommunication lines
磁带录像用时间和控制码 Time and control code for video recording
移动通信设备 运输包装 Mobile communication equipments--Transport package
车辆、机动船和由火花点火发动机驱动的装置的无线电骚扰特性的限值和测量方法 Vehicles,motorboats and spark-ignited engine-driven devices--Radio disturbance characteristics--Limits and methods of measurement
预录节目光学反射式视盘系统"LV"50Hz/625行--PAL制 Pre-recorded optical reflective videodisk system "Laser vision" 50 Hz/625 lines--PAL
电视、调频广播场强测量方法 Measurement method of TV、FM broadcasting field strength
黑白电视接收机可靠性验证试验 贝叶斯方法 Bayeses method of reliability demonstration testing for black and white TV receivers
电缆数字段进网要求 Performance requirements for digital sections of metallic cables used in telecommunication network
同轴电缆数字线路系统进网要求 Performance requirements for digital line systems on coaxial pair cables used in telecommunication network
对称电缆数字线路系统进网要求 Performance requirements for digital line systems on symmetric pair cables used in telecommunication network
数模混合公用电话自动交换网传输性能指标 The transmission performance objectives for mixed analogue-digital public telephone automatic switching network
纤维光学滤光器 第一部分: 总规范(可供认证用) Fiber optic filters--Part 1: Generic specification
光纤机械式固定接头插入损耗测试方法 Optical fiber mechanical--type splice insertion loss test
架空光缆通信系统进网要求 Requirements for aerial optical fiber cable systems joined to national public telecommunication network
高保真电唱盘最低性能要求 Minimum performance requirements for high fidelity record players
语文学习系统通用技术条件 General specification for language learning systems
声系统设备互连的优选配接值 Preferred matching values for the interconnection of sound system components
传声器通用技术条件 General specification for microphones
高保真声频放大器最低性能要求 Minimum performance requirements for high fidelity audio amplifiers
中文图文电视广播规范 Chinese character system teletext broadcasting specification
视听、视频和电视设备及系统音频盒式系统 Audio-visual video and television equipment and systems Audio cassette systems
广播节目试听室技术要求 Technical requirements for listening rooms in broadcasting programme
电视中心视频系统和脉冲系统设备技术要求 Specifications of equipement for video and pulse system of TV centre
电缆载波通信系统线路设备电气性能 Electrical properties for line equipment used on cable carrier systems
载波系统载供基频基本技术要求 Specifications for basic frequenceis of carrier supply systems
架空明线超12路载波系统与设备基本技术要求 Specification of SHF 12-channel carrier systems and equipments for open-wire pair
纤维光学调制器 第二部分: 分规范 波导电光调制器 (可供认证用) Fiber optic modulators--Part 2: Sectional specification--Waveguide electrooptic modulators
音频组合设备通用技术条件 General specification for audio combination equipment
VHS盒式录像磁带 VHS video cassette tape
录像磁带性能测量方法 Measuring methods for video tape properties
精密硬同轴线及其精密连接器总规范 Rigid precision coaxial lines and their associated precision connectors, Generic specification of
四线音频话路上的46路时分复用设备 技术条件 Specifications of 46 channels TDM equipment operating on 4 line telephone-type circuit
程控数字用户自动电话交换机通用技术条件 Generic specification for stored program control digital private automatic branch telephone exchange system
信息处理 DTE/DCE接口处起止式传输的信号质量 Information processing--Start-stop transmission signal quality at DTE/DCE interfaces
数据通信 使用V.24和X.24互换电路的DTE到DTE物理连接的接法 Data communication--Arrangements for DTE to DTE physical connection using V.24 and X.24 interchange circuits
信息处理系统 数据通信 高级数据链路控制规程 与X.25LAPB兼容的DTE数据链路规程的描述 Information processing systems--Data communication--High-level data link control procedures--Description of the X.25 LAPB-compatible DTE data link procedures
信息处理系统 数据通信 高级数据链路控制平衡类规程 交换环境中数据链路层地址的决定/协商 Information processing systems--Data communication--High-level data link control balanced classes of procedures--Data-link layer address resolution/negotiation in switched environments
公用陆地移动通信网(450MHz频段)中移动台-基站-移动电话交换局之间的信令 Signalling between mobile station and base station and mobile services switching centre in public land mobile communication network at 450MHz band
无线电业务要求的信号/干扰保护比和最小可用场强 Protection ratios and minimum usable field strengths required in thd radio services
广播录音机抖晃测量方法 Measuring methods for wow and flutter of broadcast tape recorders
彩色电视广播覆盖网技术规定 Technical specifications for coverage networks of colour TV broadcasting
12GHz频段卫星广播业务(BSS)及其馈线链路的规划参数 Planning parameters for broadcasting-satellite service(BSS) in the band 12 GHz and BSS feeder links
卫星广播业务和地面业务间的频率共用 卫星广播业务(电视)和地面业务间的频率共用导则 Frequency sharing between the broadcasting-satellite service and terrestrial services--Guide to frequency sharing , between the broadcasting-satellite service (television) and terrestrial services
卫星广播业务和地面业务间的频率共用 620~790 MHz卫星广播业务(电视)和地面广播业务(电视)间的频率共用 Frequency sharing between the broadcasting-satellite service and terrestrial services--Frequency sharing between the broadcasting-satellite service (television) and terrestrial broadcasting services(television) in frequency band 620 - 790MHz
卫星广播业务和地面业务间的频率共用 11.7~12.2GHz和12.5~12.75 GHz卫星广播业务(电视)和地面广播业务(电视)及地面无线电中继系统间的频率共用 Frequency sharing between the broadcasting-satellite services and terrestrial services--Frequency sharing between the broadcasting-satellite service(television)in one side and terrestrial broadcasting services(television)and terrestral radio-relay…
头戴耳机通用技术条件 General specification for headphones
号筒扬声器通用技术条件 General specification for horn loudspeakers
号筒扬声器测量方法 Methods of measurement for horn loudspeakers
射频同轴连接器电气试验和测量程序 反射系数 Electrical tests and measuring procedures for ridiofrequency connectors--Reflection factor
四类文件传真机终端特性 Terminal characteristics for group 4 document facsimile apparatus
陆地移动业务和固定业务传播特性 第一部分: 陆地移动业务传播特性 Propagation characteristics in land mobile service and fixed service--Part 1: Propagation characteristics in land mobile service
陆地移动业务和固定业务传播特性 第二部分: 100 - 1000MHz固定业务传播特性 Propagation characteristics in land mobile service and fixed service--Part 2: Propagation characteristics for the terrestrial fixed service in 100 - 1000 MHz
陆地移动业务和固定业务传播特性 第三部分: 视距微波接力通信系统传播特性 Propagation characteristics in land mobile service and fixed service--Part 3: Propagation characteristics of line-of-sight radio relay communication systems
视距微波接力通信系统与空间无线电通信系统共用频率的技术要求 Frequency sharing criteria between line-of-sight radio-relay systems and space radiocommunication systems
程控模拟用户自动电话交换机通用技术条件 Generic specification for stored program control analogue private automatic branch telephone exchange system
同步数字体系的比特率 Synchronous digital hierarchy bit rates
电信术语 电信、信道和网 Terminology for telecommunications--Telecommunications,channels and networks
电信术语 传输线与波导 Terminology for telecommunications--Transmission lines and waveguides
电信术语 可靠性、可维护性和业务质量 Terminology for telecommunications--Dependability and quality of service
电信术语 交换技术 Terminology for telecommunications--Switching
电信术语 使用离散信号的电信方式、电报、传真和数据通信 Terminology for telecommunications--Telecommunications using discrete signals, telegraphy, facsimile and data communication
电信术语 空间无线电通信 Terminology for telecommunications--Telecommunication using space radio communication
电信术语 振荡、信号和相关器件 Terminology for telecommunications--Telecommunications using oscillations,signals and related devices
电信术语 电话 Terminology for telecommunications--Telecommunications using telephony
电信术语 无线电波传播 Terminology for telecommunications--Telecommunications using radio wave propagation
电信术语 天线 Terminology for telecommunications--Telecommunications using antennas
电信术语 传输 Terminology for telecommunications--Telecommnications using transmission
电信术语 光纤通信 Terminology for telecommnications--Optical communication
光缆通信系统传输性能测试方法 The measurement methods of transmission performances on optical fiber cable communication systems
广播录像磁带测量方法 Measuring methods for broadcast video tape
广播录像磁带性能要求 Characteristic requirements for broadcast video tape
盒式音带制品质量总技术规范 General specification of quality for pre-recorded audio cassette
海岸电台高频无线电话频道干扰的计算方法 Interference calculation methods of coast radiotelephone station operating in high frequency bands
演播室数字电视编码参数规范 The specifications of encoding parameters of digital television for studio
黑白电视广播接收机总技术条件 General specification for monochrome television broadcasting receivers
应用电视设备安全要求及试验方法 Safety requirements and testing methods for equipments of applied TV
SMB型射频同轴连接器 R.F coaxial connectors of type SMB
四声道数字声音副载波系统技术规范 Specification of the four channels digital sound sub-carrier system
PAL-D制卫星电视广播图像质量要求 The demand for the picture quality of PAL-D system in satellite television broadcasting services
声系统设备互连用连接器的应用 Application of connectors for the interconnection of sound system equipment
摄影测量与遥感术语 Photogrammetry and remote sensing terms
电视广播接收机用红外遥控发射器技术要求和测量方法 Technical requirements and methods of measurement of infrared remote control radiation unit for television broadcast receivers
4X139264 kbit/s 光缆数字线路系统技术要求 Technical requirement for digital line systems on optical fibre cables at 4X139264kbit/s
脉冲噪声干扰引起移动通信性能降级的评定方法 Methods of judging degradation for interference to mobile radiocommunication in the presence of impulsive noise
音响设备用连接器系列和品种 Series and style of connectors for radio and associated sound equipment
无中心多信道选址移动通信系统体制 Land mobile communication system requirements using multi-channel access techniques without a central controller
广播及类似声系统用连接器的应用 Application of connectors for broadcast and similar sound system
同轴电缆屏蔽衰减测量方法 (吸收钳法) Methods of measurement of screening attenuation for coaxial cables (absorbing clamp method)
自动电话机技术条件 The specifications of automatic telephone set
电报音频接口技术要求 Specifications of voice frequency telegraphic interface
漏泄同轴电缆分规范 Sectional specification for leaky coaxial cables
高保真调频广播调谐器最低性能要求 Minimum performance requirements on high fidelity FM radio tuners
电缆分配系统用混合集成电路高频宽带放大器系列和品种 Series and products of high frequency wideband amplifiers for hybrid integrated circuits used in cabled distribution systems
可搬移式卫星通信地球站设备通用技术条件 General specification of equipments for transportable satellite communication earth station
全球海上遇险安全系统(GMDSS) 船用无线电通信设备技术要求 Global maritime distress and safety system(GMDSS)--Technical requirement for marine telecommunication equipment
会议系统电及音频的性能要求 Electrical and audio requirements for the conference systems
同步数字体系信号的帧结构 Frame structure for synchronous digital hierarchy signal
汉字智能用户电报系统及终端的一致性测试及规程 Conformance test and procedures for the chinese teletex system and terminal
防爆应用电视总技术条件 Generic specification for explosive atmospheres applied TV
应用电视外部接口要求 Requirements of external interface for applied TV
炉用高温电视系统总技术条件 Generic specification for furnace high-temperature television system
炉用高温电视系统测量方法 Methods of measurement for furnace high-temperature television system
音频记录PCM编解码系统 PCM encoder/decoder system for audio recording
高压交流架空送电线无线电干扰限值 Limits of radio interference from AC high voltage overhead power transmission lines
交流电气化铁道电力机车运行产生的无线电辐射干扰的测量方法 Measurement method of radiated radio interference caused by moving electric locomotive on AC electrified railways
交流电气化铁道接触网无线电辐射干扰测量方法 The measurement method of radiated radio interference from contact system of AC electrified railways
电子调光设备无线电骚扰特性限值及测量方法 Limits and methods of measurement of radio disturbance characteristics of electronic lighting control equipment
录像机用红外遥控发射器通用技术条件 General specification of infrared remote control radiation units for video tape recorders
广播数据系统(RDS)技术规范 Specification of the radio data system
图文电视通道基本技术参数及测试方法 Basic technical parameter and methods of measurement of teletext channel
数字同步网接口要求 Synchronization interface-requirments for digital network
数字同步网中交换设备时钟性能的测试方法 easuring methods for the performances of switching equipment clocks in digital synchronous network
64 - 1920kbit/s 会议电视系统进网技术要求 Networking specifications for 64 - 1920kbit/s videoconferencing systems
4×139 264kbit/s 光端机技术要求 Technical requirement for optical line terminals at 4×139 264kbit/s
数字微波通信设备进网技术要求 2 - 8GHz数字微波收发信机 Networking specification for digital microwave communication equipments 2 - 8GHz digital microwave transceiver
移动通信设备安全要求和试验方法 Mobile radio equipment safety requirements and testing methods
移动通信调频无线电话机通用技术条件 General specification for radio transceiver employing F3E emission used in the mobile services
移动通信调频无线电话机质量评定规则 Quality assessment requlations for radio transceiver employing F3E emission used in the mobile services
移动通信调频无线电话机环境要求和试验方法 Environmental requirements and test methods for radio transceiver employing F3E emission used in the mobile services
移动通信调频无线电话机可靠性要求及试验方法 Reliability requirements and test methods for radio transceiver employing F3E emission used in the mobile services
视听用户终端技术要求 视听用户终端业务中64 - 1920kbit/s信道的帧结构 Performance requirements of audiovisual terminals--Frame structure for a 64 to 1920kbit/s channel in audiovisual teleservices
视听用户终端技术要求 视听系统中帧同步的控制和指示信号 Performance requirements of audiovisual terminals--Frame-synchronous control and indication signals for audiovisual systems
视听用户终端技术要求 使用2Mbit/s以内数字信道的视听用户终端之间建立通信的方法 Performance requirements of andiovisual terminals--System for establishing communication between audiovisual terminals using digital channels up to 2Mbit/s
视听用户终端技术要求 窄带视觉电话系统和终端设备 Performance requirements of audiovisual terminals--Narrow-band visual telephone systems and terminal equipment
视听用户终端技术要求 P×64kbit/s视听业务的视频编解码器 Performance requirements of audiovisual terminals--Video code for audiovisual services at P×64kbit/s
VHS录像机音控磁头通用技术条件 General spesification for audio/control heads of VHS video tape recorders
VHS录像机全消磁头通用技术条件 General specification for full track erasing heads of VHS video tape recorders
视听、视频和电视系统中设备互连的优选配接值 Preferred matching values for the interconnection of equipment in audio-visual, video and television systems
激光唱机通用技术条件 General specification for compact disc players
VHS型12.65mm录像机校准带 VHS 12.65mm VTR's calibration tapes
电缆电视接收机基本参数要求和测量方法 Basic parameter requirements and methods of measurement on receivers for CATV
摄像机(PAL/SECAM/NTSC)测量方法 第1部分: 非广播单传感器摄像机 Video cameras(PAL/SECAM/NTSC)--Methods of measurement--Part 1: Non-broadcast single-sensor cameras
射频同轴电缆组件 第2-1部分:柔软同轴电缆组件分规范 Radio frequency and coaxial cable assemblies--Part 2-1: Sectional specification for flexible coaxial cable assemblies
射频同轴电缆组件 第4部分: 半硬同轴电缆组件分规范 Radio frequency and coaxial cable assemblies--Part 4: Sectional specification for semi-rigid coaxial cable assemblies
卫星通信船载地球站码分多址通信设备通用技术条件 General specification of satellite communication earth station for shipborne communication equipment for CDMA
集群移动通信系统设备通用规范 General specification for trunked mobile communication system
漏泄电缆无线通信系统总规范 General specification for leaky cable radio communication system
C型射频同轴连接器 R.F coaxial connectors, type C
SMC型射频同轴连接器 R.F. coaxial connectors, type SMC
UHF 型射频同轴连接器 R.F.coaxial connectors, type UHF
SSMA型射频同轴连接器 R.F. coaxial connectors, type SSMA
SSMB 型射频同轴连接器 R.F. coaxial connectors, type SSMB
射频电缆 第四部分: 超屏蔽电缆规范 第一篇: 一般要求和试验方法 Radio frequency cables--Part 4: Specification for superscreened cables--Section 1: General requirements and test methods
VHF/UHF频段广播业务与移动和固定业务频率共用技术规定 The technical regulations for frequency sharing between the broadcasting service and the mobile and fixed services in the VHF/UHF bands
无线寻呼系统设备总规范 General specification for equipment of radio paging system
无中心多信道选址移动通信系统设备通用规范 General specification for land mobile communication system equipment using multi-channel access techniques without a central controller
同步数字体系信号的基本复用结构 Basic multiplexing structure for synchronous digital hierarchy signals
同步数字体系(SDH)光缆线路系统进网要求 Requirements for synchronous digital hierarchy (SDH) optical fiber cable line systems of national public telecommunication network
900MHz 公用移动通信系统移动台进网技术要求及测试方法 Technical requirement and testing methods for mobile station access to 900MHz public mobile telecommunication system
广播声频通道技术指标测量方法 Technical specification measuring method of broadcasting audio channel
短波(HF)广播单边带制式技术规范 Single sideband(SSB) system specifications for HF broadcasting
光纤总规范 第1部分: 总则 Generic specification for optical fibres--Part 1: General
光纤总规范 第2部分: 尺寸参数试验方法 Generic specification for optical fibres--Part 2: Measuring methods for dimensions
光纤总规范 第3部分: 机械性能试验方法 Generic specification for optical fibres Part 3: Measuring methods for mechanical characteristics
光纤总规范 第4部分: 传输特性和光学特性试验方法 Generic specification for optical fibres--Part 4: Measuring methods for transmission and optical characteristics
光纤总规范 第5部分: 环境性能试验方法 Generic specification for optical fibres--Part 5: Measuring methods for environmental characteristics
广播节目声音质量主观评价方法和技术指标要求 The method of subjective assessment of the sound quallty for broadcast programmes and the technical parameters requirements
VHS 录像机磁头鼓组件通用技术条件 General specification of video head drum assembly for VHS video cassette recorder
提供数据传输业务的分组交换公用数据网(PSPDN) 和电路公用数据网(CSPDN)之间互通的一般配置 General arrangements for interworking between packet switched public data networks (PSPDN) and circuit switched public data networks (CSPDN) for the provision of data transmission services
分组交换公用数据网(PSPDN)之间互通的一般配置 General arrangements for interworking between packet switched public data networks (PSPDNS)
光纤光缆接头 第1部分: 总规范 构件和配件 Splices for optical fibres and cables--Part 1: Generic specification--Hardware and accessories
光纤光缆接头 第2部分: 分规范 光纤光缆接头盒和集纤盘 Splices for optical fibres and cables--Part 2: Sectional specification--Splice organizers and closures for optical fibres and cables
光纤光缆接头 第3部分: 分规范 光纤光缆熔接式接头 Splices for optical fibres and cables--Part 3: Sectional specification--Fusion splices for optical fibres and cables
光纤光缆接头 第4部分: 分规范 光纤光缆机械式接头 Splices for optical fibres and cables--Part 4: Sectional specification--Mechanical splices for optical fibres and cables
射频同轴电缆组件 第3部分 半柔软同轴电缆组件分规范 Radio frenquency and coaxial cable assemblies--Part 3: Sectional specification for semi-flexible coaxial cable assemblies
通信设备清晰度DRT法评价用语音材料库 Speech material library used DRT for articulation evaluation of communication equipments
红外传输的应用及系统间干扰的防护或控制的指南 Guide to uses of infra-red transmission and the prevention or control of interference between systems
视听、视频和电视设备与系统双幻灯机控制系统操作规程 Audio-visual, video and television equipment and systems-Control systems for two still projectors operating practice
数传电台通用规范 Generic specification for data transceiver
音频、视频及视听系统的家用数字总线(D2B) Audio video and audiovisual systems--Domestic digital bus (D2B)
TDM/FDMA点对多点微波通信系统通用规范 General specification for microwave communication systems with TDM/FDMA point-to-multipoint
消息处理系统 电子数据交换消息处理系统 Message handling systems--Electronic data interchange messaging system
黑白通用型应用电视摄像机通用技术条件 General specification for monochrome universal NBTV cameras
同步数字体系(SDH)复用设备技术要求 Specifications for synchronous digital hierarchy (SDH) multiplex equipment
30MHz - 1GHz 声音和电视信号的电缆分配系统辐射测量方法和限值 Measurements and limits of radiation of cabled distribution systems primarily intended for sound and television signals operating between 30MHz and 1GHz
30MHz - 1GHz 声音和电视信号电缆分配系统抗扰度测量方法和限制 Measurements and limits of immunity of cabled distribution systems primarily intended for sound and television signals operating between 30MHz and GHz
NICAM-728卫星电视信道副载波传送数字声技术规范 Technical specification for NICAM-728 digital audio signal transmission with satellite TV channel subcarrrier
无线电寻呼系统与公用电话自动交换网的接口技术要求及测试方法 Technical specifications and test methods of the interface of radio paging system and PSTN
同步数字体系(SDH)光缆线路系统测试方法 Methods of measurement for synchronous digital hierarchy(SDH)optical fiber cable line systems
传输速率为64Kbit/S的文件传真三类机进网技术要求 Technical requirments for group 3 facsimile--apparatus connected to telecommunication network on transmission rate 64kbit/s
点对点数字租用电路上使用的48/56/64kbit/s数据电路终接设备技术要求 A 48/56/64kbit/s data circuit terminating equipment standardized for use on digital point-to-point leased circuits
通信用电源设备通用试验方法 General test methods of power supply equipments for telecommunications
光纤放大器总规范 Generic specification on optical fibre amplifiers
光纤放大器试验方法基本规范 第1部分:增益参数的试验方法 Basic specification for optical fibre amplifier test methods--Part 1: Test methods for gain parameters
光纤放大器试验方法基本规范 第2部分: 功率参数的试验方法 Basic specification for optical fibre amplifier test methods--Part 2: Test methods for power parameters
光纤放大器试验方法基本规范 第3部分: 噪声参数的试验方法 Basic specification for optical fibre amplifier test methods--Part 3: Test methods for noise figure parameters
光纤放大器试验方法基本规范 第5部分: 反射参数的试验方法 Basic specification for optical fibre amplifier test methods--Part 5: Test methods for reflectance parameters
光纤放大器试验方法基本规范 第6部分: 泵浦泄漏参数的试验方法 Basic specification for optical fibre amplifier test methods--Part 6: Test methods for pump leakage parameters
光纤放大器试验方法基本规范 第7部分: 带外插入损耗的试验方法 Basic specification for optical fibre amplifier test methods--Part 7: Test methods for out-of-band insertion losses
应急声系统 Sound systems for emergency purposes
采用数据链路协议的会议电视远端摄像机控制规程 A far end camera control protocol for videoconferences using data link protocol
无绳电话系统设备总规范 Generic specification for equipment of cordless telephone system
短波单边带通信设备通用规范 General specification for short wave single-side band communication equipment
卫星通信中央站通用技术条件 General specification of satellite communication centre station
卫星电视上行站通用规范 General specification for satellite television up-link earth station
Ku频段卫星电视地球接收站通用规范 General specification for Ku-band satellite television earth receive-only station
国际海事卫星C船舶地球站技术要求 Technical requirements of inmarsat standard C ship earth station
无绳电话机进网技术要求和测试方法 Technical requirements and measuring mehods for cordless telephone sets access to PSTN
160kbit/s 用户线数字倍增设备进网要求 Requirement for 160kbit/s subscriber line digital multigain equipment joined to national public telecommunication network
声音广播中音频噪声电平的测量 Measurement of audio-frequency noise voltage level in sound broadcasting
模拟声音节目信号的常规测试信号 用于测量节目信道间的干扰 A conventional test signal simulating sound--Programme signals for measuring interference in other channels
ISDN用户-网络接口第三层基本呼叫控制技术规范及测试方法 第1部分: 第三层基本呼叫控制技术规范 ISDN user-network interface layer 3 specification and testing method for basic call control Part 1: Layer 3 specification for basic call control
ISDN用户-网络接口第三层基本呼叫控制技术规范及测试方法 第2部分: 第三层基本呼叫控制协议测试方法 ISDN user-network interface layer 3 specification and testing method for basic call control procedure-Part 2: Testing method for layer 3 basic call control protocol
积分平均声级计 Integrating-averaging sound level meters
峰值节目电平表 Peak programme level meters
电视节目磁带交换 Exchange of television programmes on magnetic tape
电力系统通信业务导则 General considerations for telecommunication services for electric power systems
无线传声器系统通用规范 General specification for wireless microphone systems
广播磁带录像机测量方法 第1部分: 机械测量 Broadcast video tape recorders methods of measurement Part 1: Mechanical measurements
广播磁带录像机测量方法 第2部分:模拟复合视频信号的电性能测量 Broadcast video tape recorders--Methods of measurement--Part 2: Electrical measurements of analogue composite video signals
电视广播场消隐期插入行用途分配 Assignnent of the uses of insertion lines in the field-blanking interval in television broadcasting
电视插入测试信号简化自动测量参数的定义 Definitons of parameters for simplified automatic measurement of television insertion test signals
电视广播接收机测量方法 第1部分: 一般考虑 射频和视频电性能测量以及显示性能的测量 Methods of measurement on receivers for television broadcast transmissions Part 1: General considerations electrical measurements at radio and video frequencies and measurements on displays
电视调谐接收器高保真声输出最低性能要求 High fidelity sound output of television tuners minimum performance requirements
标准音量表 Standard volume indicators
声级计的无规入射和扩散场校准 Random-incidence and diffuse-field calibration of sound levecl meters
由4:2:2标准定义的数字电视信号馈送和一次分配网络传输技术要求 Technical requirements for the transmission through contribution and primary distribution networks of digital television signals defined according to the 4:2:2 standard
在三次群中传送馈送质量分量编码数字电视信号传输技术规范 Specification for transmission of component-coded digital television signals for contribution-quality applications at the third hierarchical level
卫星地球站 工作在11/12GHz频带下用于数据分配的只接收甚小口径终端(VSAT)技术要求 Satellite earth stations(SES);Receive-only very small aperture terminals(VSATs) used for data distribution operating in the 11/12 GHz frequency bands
移动通信有线/无线转接设备通用规范 General specification for telephone/radio interconnect equipment used in mobile communication
声强测量仪 用声压传声器对测量 Instruments for the measurement of sound intensity-measurement with pairs of pressure sensing microphones
光纤熔接机通用规范 General specification for optical fibre fusion splicers
VHS型12.65mm螺旋扫描盒式磁带录象系统 小型VHS视频盒带 Helical-scan video tape cassette system using 12.65mm magnetic tape on type VHS-Compact VHS video cassette
CD数字音频系统 Compact disc digital audio system
中华人民共和国中文航行警告标准格式 The standard form of P.R.C. for navigational warnings in Chinese
中华人民共和国英文航行警告标准格式 The standard form of P.R.C.for navigational warnings in english
信息技术设备抗扰度限值和测量方法 Information technology equipment--Immunity characteristics--Limits and methods of measurement
机动车电子电器组件的电磁辐射抗扰性限值和测量方法 Limits and methods of testing for immunity of electrical/electronic sub--asseblies in vehicles to electromagnetic radiation
电磁兼容 综述 电磁兼容基本术语和定义的应用与解释 Electromagnetic compatibility General EMC Application and interpretation of fundamental definitions and terms
电磁兼容 限值 对额定电流不大于16A的设备在低压供电系统中产生的电压波动和闪烁的限制 Electromagnetic compatibility-Limits-Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current≤16A
低压电气及电子设备发出的谐波电流限值(设备每相输入电流≤16A) The limits for the harmonic current emissions caused by low-voltage electrical and electronic equipments(equpment input current≤16A per phase)
电磁兼容 限值 对额定电流大于16A的设备在低压供电系统中产生的电压波动和闪烁的限制 Electromagnetic compatibility limits limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16A
电磁兼容 限值 中、高压电力系统中畸变负荷发射限值的评估 Electromagnetic compatibility Limits Assessment of emission limits for distorting loads in MV and HV power systems
电磁兼容 限值 中、高压电力系统中波动负荷发射限值的评估 Electromagnetic compatibility Limits Assessment of emission limits for fluctuating loads in MV and HV power systems
电磁兼容 试验和测量技术 抗扰度试验总论 Electromagnetic compatibility Testing and measurement techniques Overview of immunity tests
电磁兼容 试验和测量技术 静电放电抗扰度试验 Electromagnetic compatibility Testing and measurement techniques Electrostatic discharge immunity test
电磁兼容 试验和测量技术 射频电磁场辐射抗扰度试验 Electromagnetic compatibility(EMC) Testing and measurement techniques Radiated,radio-frequency,electromagnetic field immunity test
电磁兼容 试验和测量技术 电快速瞬变脉冲群抗扰度试验 Electromagnetic compatibility Testing and measurement techniques Electrical fast transient/burst immunity test
电磁兼容 试验和测量技术 浪涌(冲击)抗扰度试验 Electromagnetic compatibility-Testing and measurement techniques--Surge immunity test
电磁兼容 试验和测量技术 射频场感应的传导骚扰抗扰度 Electromagnetic compatibility-Testing and measurement techniques Immunity to conducted disturbances,induced by radio-frequency fields
电磁兼容 试验和测量技术 供电系统及所连设备谐波、谐间波的测量和测量仪器导则 Electromagnetic compatibility Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation for power supply systems and equipment connected thereto
电磁兼容 试验和测量技术 工频磁场抗扰度试验 Electromagnetic compatibility Testing and measurement techniques Power magnetic field immunity test
电磁兼容 试验和测量技术 脉冲磁场抗扰度试验 Electromagnetic compatibility Testing and measurement techniques Pulse magnetic field immunity test
电磁兼容 试验和测量技术 阻尼振荡磁场抗扰度试验 Electromagnetic compatibility Testing and measurement techniques Damped oscillatory magnetic field immunity test
电磁兼容 试验和测量技术 电压暂降、短时中断和电压变化的抗扰度试验 Electromagnetic compatibility-Testing and measurement techniques-Voltage dips,short interruptions and voltage variations immunity tests
电磁兼容 试验和测量技术 振荡波抗扰度试验 Electromagnetic compatibility Testing and measurement techniques Oscillatory waves immunity test
卫星数字电视广播信道编码和调制标准 Channel coding and modulation standard for Digital Video Vroadcasting-Satellite(DVB-S)
射频电缆 第1部分: 总规范--总则、定义、要求和试验方法 Radio-frequency cables Part 1: Generic specification--General,definitions,requirements and test methods
射频电缆 第2部分: 聚四氟乙烯(PTFE)绝缘半硬射频同轴电缆分规范 Radio-frequency cables Part 2: Sectional specification for semi-rigid radio-frequency and coaxial cables with polytetrafluoroethylene(PTFE) insulation
射频电缆 第3部分: 局域网用同轴电缆分规范 Radio frequency cables Part 3: Sectional specification for coaxial cables for local area networks
射频同轴电缆组件 第1部分: 总规范 一般要求和试验方法 Radio-frequency and coaxial cable assemblies--Part 1: Generic specification--General requirements and test methods
电气照明和类似设备的无线电骚扰特性的限值和测量方法 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
有线电视频率配置 Frequency allocation of CATV
三类传真终端的安全能力 Security capabilities for use with group 3 facsimile terminals
在PSTN或二线点对点租用电话型电路上同时传送数据和数字化编码语音信号的规程 Procedures for simultaneous transmission of data and digitally encoded voice signals over the PSTN or over 2-wire leased point-to-point telephone type circuits
电磁兼容 通用标准 居住、商业和轻工业环境中的抗扰度试验 Electromagnetic compatibility--Generic standards--Immunity for residential,commercial and light-industrial environments
电磁兼容 通用标准 居住、商业和轻工业环境中的发射标准 Electromagnetic compatibility--Generic standards Emission standard for residential,commercial and light-industrial environments
电磁兼容 通用标准 工业环境中的发射标准 Electromagnetic compatibility (EMC) Generic standards--Emission standard for industrial environments
8mm磁带螺旋扫描盒式录像系统(8mm录像) 第1部分: 总规范 Helical-scan video tape cassette systems using 8mm magnatic tape--8mm video--Part 1: General specifications
8mm磁带螺旋扫描盒式录像系统(8mm录像) 第2部分:PCM多迹音频系统 Helical-scan video tape cassette systems using 8mm magnatic tape--8mm video--Part 2: PCM multi-track audio system
8mm磁带螺旋扫描盒式录像系统(8mm录像) 第3部分:Hi8高带规范 Helical-scan video tape cassette systems using 8mm magnatic tape--8mm video--Part 3:High-band specifications for Hi 8
经公用交换电话网或综合业务数字网或电路交换公用数据网接入分组交换公用数据网的分组式数据终端设备(DTE)和数据电路终接设备(DCE)之间的接口 Interface between data terminal equipment(DTE) and data circuit-terminating equipment (DCE) for terminals operating in the packet mode and accessing a packet switched public data network through a public switched telephone network or anintegrated se
广播电视光缆干线同步数字体系(SDH)传输接口技术规范 Technical specifications of SDH transmission interface for broadcasting and television optical backbone network
ISDN用户-网络接口数据链路层技术规范及一致性测试方法 第1部分: 用户-网络接口数据链路层技术规范 ISDN user-network interface data link layer specification and conformance testing method--Part 1: User-network interface data link layer specification
ISDN用户-网络接口数据链路层技术规范及一致性测试方法 第2部分: 数据链路层协议一致性测试方法 ISDN user-network interface data link layer specification and conformance testing method--Part 2: Data link layer protocol conformance testing method
4:2:2数字分量图象信号的接口 Interfaces for 4:2:2 digital component video signals
电磁兼容 环境 电磁环境的分类 Electromagnetic compatibility Environment Classification of electromagnetic environments
电磁兼容 环境 工业设备电源低频传导骚扰发射水平的评估 Electromagnetic compatibility Environment Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
低比特率通信的视频编码 Video coding for low bitrate communication
移动通信选择呼叫和数据设备测量方法 Methods of measurement for selective-calling and data equipment used in the mobile services
视听、视频及电视设备和系统教育和训练用录像磁带的引带和尾带 Audio-visual,video and television equipment and systems Video tape leader and trailer for education and training applications
视听设备和系统 标牌--电源标志 Audiovisual equipment and systems Rating plates--Marking of electricity supply
音频、视频及视听系统 视频系统Y/C连接器的应用和优选电配接值 Audio,video and audiovisual systems Application of Y/C connector and preferred electrical matching values for video systems
全球导航卫星系统(GNSS) 第1部分: 全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果 Global navigation satellite systems(GNSS)--Part 1: Global positioning system(GPS)--Receiver equipment-performance standards,methods of testing and required test results
测量、控制和实验室用的电设备电磁兼容性要求 Electrical equipment for measurement,control and laboratory use--EMC requirements
纤维光学转接器 第1部分: 总规范 Fiber optic adaptors--Part 1: Generic
纤维光学互连器件和无源器件 基本试验和测量程序 第1部分: 总则和导则 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 1: General and guidance
纤维光学互连器件和无源器件 基本试验和测量程序 第2-2部分: 试验 配接耐久性 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-2: Tests--Mating durability
纤维光学互连器件和无源器件 基本试验和测量程序 第2-3部分: 试验 静态剪切力 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-3: Tests--Static shear load
纤维光学互连器件和无源器件 基本试验和测量程序 第2-4部分: 试验 光纤/光缆保持力 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-4: Tests--Fibre/cable retention
纤维光学互连器件和无源器件 基本试验和测量程序 第2-6部分: 试验 锁紧机构抗拉强度 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-6: Tests--Tensile strength of coupling mechanism
纤维光学互连器件和无源器件 基本试验和测量程序 第2-18部分: 试验 干热 高温耐久性 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-18: Tests-dry heat-high temperature endurance
纤维光学互连器件和无源器件 基本试验和测量程序 第2-39部分: 试验 对外界磁场敏感性 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-39: Tests-Susceptibility to external magnetic fields
纤维光学互连器件和无源器件 基本试验和测量程序 第3-2部分: 检查和测量 单模纤维光学器件偏振依赖性 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-2: Examinations and measurements--Polarization dependence of a single--mode fibre optic device
纤维光学互连器件和无源器件 基本试验和测量程序 第3-3部分: 检查和测量--监测衰减和回波损耗变化(多路) Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-3: Examinations and measurements--Monitoring change in attenuation and in return loss (multiple paths)
纤维光学互连器件和无源器件 基本试验和测量程序 第3-6部分: 检查和测量 回波损耗 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 3-6: Examinations and measurements--Return loss
数字编码彩色电视系统用测试信号 Test signals for digitally encoded colour television system
纤维光学环行器 Fiber optic circulators
海底光缆规范 Specification for submarine optical fiber cables
分组交换公用数据网和公用海事移动卫星数据传输系统之间的互通 Interworking between packet switched public data networks and public maritime mobile satellite data transmission systems
电磁兼容 电磁兼容标准起草导则 Electromagnetic compatibility--Guide to the drafting of electromagnetic compatibility standards
铅笔 Pencil
公路等级代码 Code for highway classification
公路路面等级与面层类型代码 Code for classification and type of highway pavement
程序设计语言ALGOL 60 Programming languages ALGOL 60
信息处理 数据流程图、程序流程图、系统流程图、程序网络图和系统资源图的文件编制符号及约定 Information processing - Documentation symbols and conventions for data, program and system flowcharts, program network charts and system resources charts
信息技术 信息交换用七位编码字符集 Information technology--7-bit coded character set for information interchange
信息处理交换用七位编码字符集在9磁道12.7 毫米磁带上的表示方法 Methods for indication of the 7-bit encoding characterset for information processing switching on 12.7mm magnetic tape
信息处理交换用穿孔纸带孔的尺寸与位置 The dimension and position of the holes of perforated paper tape for information processing exchange
信息处理交换用七位编码字符集在穿孔纸带上的表示方法 Methods for expression of the 7-bit encoding characterset for information processing exchange on perforated paper tape
信息处理交换用9磁道12.7毫米宽32行/毫米记录磁带 Recording magnetic tape with 9 magnetic tracks, 12.7mm width and 32 lines/mm for information processing exchange
中华人民共和国行政区划代码 Codes for the administrative divisions of the People's Republic of China
人的性别代码 Codes for sexual distinction of human beings
顶装式单片可换盒式磁盘的机械性能 Mechanical properties of interchangeable magnetic single disk cartridge (top mounted)
六片可换磁盘组的机械性能 Mechanical properties of interchangeable magnetic six-disk pack
十一片可换磁盘组的机械性能 Mechanical properties of interchangeable magnetic eleven-disk pack
信息技术 字符代码结构与扩充技术 Information technology--Character code structure and extension techniques
信息交换用汉字编码字符集 基本集 Code of Chinese graphic character set for information interchange--Primary set
信息处理交换用七位编码字符集键盘的字母数字区布局 Keyboard for international information processing interchange using the 7-bit coded character set--Alpha- numeric area
数据交换用盘式穿孔纸带的一般要求 Rolled-up punched paper tape for data interchange--general requirements
顶装式单片可换盒式磁盘的磁性能 Magnetic characteristics of interchangeable magnetic single disk cartridge (top loaded)
六片可换磁盘组的磁性能 Magnetic characteristics of interchangeable magnetic six-disk pack
十一片可换磁盘组的磁性能 Magnetic characteristics of interchangeable magnetic eleven-disk pack
信息技术 程序设计语言Fortran Information technology--Programming language--Fortran
信息处理未穿孔纸带 Information processing--Unpunched paper tape
信息处理交换用七位和八位编码字符集在穿孔纸卡片上的表示方法 Implementation of 7-bit and 8-bit coded character sets for information processing interchange on punched paper cards
信息处理交换用穿孔纸带的盘心尺寸 Information processing--Cores perforated paper tape for information interchange--Dimensions
信息处理用办公机器和打印机使用的编织打印色带的宽度 Office machines and printing machines used for information processing--Widths of fabric printing ribbons
信息交换用磁带盘的尺寸和性能 Dimensions and characteristics of magnetic tape reel for information interchange
数据通信基本型控制规程 Basic mode control procedures for data communications
数据终端设备(DTE)和数据电路终接设备(DCE)之间的接口电路定义表 List of definitions for interchange circuits between data terminal equipment and data-circuit-terminating equipment
文献类型与文献载体代码 Codes for documentary types and documentary carriers
信息处理用80列穿孔纸卡片的尺寸 Dimensions of 80 columns punched paper cards for information processing
信息交换用图形字符点阵形状 Matrix font of graphic characters for information interchange
办公机器和数据处理设备 行间距和字符间距 Office machines and data processing equipments--Line spacings and character spacings
信息处理用七位编码字符集控制字符的图形表示 Graphical representations of the control characters of 7-bit coded character set for information processing
程序设计语言COBOL 预备知识 Programming language COBOL - Introductory information
程序设计语言COBOL 核心模块 Programming language COBOL - Nucleus module
程序设计语言COBOL 顺序I-O模块 Programming language COBOL - Sequential I-O module
程序设计语言COBOL 相对I-O模块 Programming language COBOL - Relative I-O module
程序设计语言COBOL 索引I-O模块 Programming language COBOL - Indexed I-O module
程序设计语言COBOL 排序-合并模块 Programming language COBOL - Sort-merge module
程序设计语言COBOL 报表编制模块 Programming language COBOL - Report writer module
程序设计语言COBOL 程序分段模块 Programming language COBOL - Segmentation module
程序设计语言COBOL 源正文管理模块 Programming language COBOL - Source text manipulation module
程序设计语言COBOL 排错模块 Programming language COBOL - Debug module
程序设计语言COBOL 程序间通信模块 Programming language COBOL - Inter-program communication module
程序设计语言COBOL 通信模块 Programming language COBOL - Communication module
程序设计语言 最小 BASIC Programming languages--Minimal BASIC
圆珠笔 Ball point pen
信息处理 办公机器和打印机用编织打印色带通用技术条件 Office machines and printing machines used for information processing--General specification of fabric printing ribbons
中央党政机关、人民团体及其他机构名称代码 Code for the names of the Central Party and State Organs People's Communities and the other State Organizations
文化程度代码 Codes for educational level
国民经济行业分类与代码 Industrial classification and codes for national economic activities
家庭关系代码 Codes for family relationship
政治面貌代码 Codes for political affiliation
党、派代码 Codes for political parties and groups
本人成分代码 Codes for personal class status
家庭出身代码 Codes for class origin of family
婚姻状况代码 Codes for marriage conditions
健康状况代码 Codes for state of health
打字机 打印键和功能键的布局 Typewriters--Layout of printting and function keys
办公机器和数据处理设备键盘上控制键定位的原则 Office machines and data processing equipment--Principles governing the positioning of control keys on key-boards
信息技术设备的安全 Safety of information technology equipment
电子计算器通用技术条件 General specification for electronic calculators
信息技术 汉字编码字符集(基本集)24点阵字型 Information technology--Chinese ideogram coded character set(basic set)--24 dot matrix font
信息技术 汉字编码字符集(辅助集)24点阵字型 Information technology--Chinese ideogram coded character set (auxiliary set)--24 dot matrix font
数据处理词汇 14部分 可靠性维修和可用性 Data processing--Vocabulary--Section 14: Reliability, maintenance and availability
信息技术 汉字编码字符集(基本集) 16点阵字型 Information technology--Chinese ideogram coded character set (basic set)--16 dot matrix font
信息处理 七位和八位编码字符集用的控制功能 Information processing--Control functions for 7-bit and 8-bit coded character sets
数据处理词汇 02部分 算术和逻辑运算 Data processing--Vocabulary--Section 02: Arithmetic and logic operations
数据处理词汇 03部分 设备技术 Data processing--Vocabulary--Section 03: Equipment technology (selected terms)
数据处理词汇 05部分 数据的表示法 Data processing--Vocabulary--Section 05: Representationof data
数据处理词汇 07部分 计算机程序设计 Data processing--Vocabulary--Section 07: Computer programming
信息技术 词汇 第8部分: 安全 Information technology-Vocabulary Part 8: Security
信息技术 词汇 第9部分: 数据通信 Information technology--Vocabulary Part 9: Data communication
数据处理词汇 10部分 操作技术和设施 Data processing--Vocabulary--Section 10: Operating techniques and facilities
数据处理词汇 13部分 计算机图形 Data processing--Vocabulary--Part 13: computer graphics
数据处理词汇 15部分 程序设计语言 Data processing--Vocabulary--Section 15: Programming languages
数据处理词汇 16部分 信息论 Data processing--Vocabulary--Section 16: information theory
数据处理词汇 18部分 分布式数据处理 Data processing--Vocabulary--Section 18: Distributed data processing
数据处理词汇 19部分 模拟计算 Data processing--Vocabulary--Section 19: Analog computing
信息技术词汇 20部分 系统开发 Information technology--Vocabulary--Part 20: System development
数据处理词汇 22部分: 计算器 Data processing--Vocabulary--Section 22: Calculators
信息技术 词汇 第27部分: 办公自动化 Information technology--Vocabulary Part 27: Office automation
信息技术 词汇 第28部分: 人工智能 基本概念与专家系统 Information technology--Vocabulary Part 28: Artificial intelligence--Basic concepts and expert system
使用串行二进制数据交换的数据终端设备和数据电路终接设备之间的接口 Interface between data terminal equipment and data circuit termination equipment employing serial binary data interchange
自来水笔 Fountain pen
信息技术 汉字编码字符集(基本集)32点阵字型 宋体 Information technology--Chinese ideogram coded character set (basic set)--32 dot matrix font: Song Ti
计算机软件需求说明编制指南 Guide to computer software requirements specifications
运输方式代码 Code for modes of transport
文献书目信息交换用数学字符编码字符集 Character set for bibliographic information interchange on mathematical coding of characters
信息处理交换用9磁道12.7毫米宽63行/毫米调相制记录磁带 Information processing--9-track, 12.7mm wide magnetic tape for information interchange recorded at 63rpmm, phase encoded
职业分类与代码 Classification and codes of occupations
十二片可换磁盘组(200兆字节) Interchangeable magnetic twelve-disk pack(200M bytes)
十二片可换磁盘组(100兆字节) Interchangeable magnetic twelve-disk pack (100M bytes)
中华人民共和国学位代码 Codes for degrees of the People's Republic of China
语种熟练程度代码 Codes for levels of mastering foreign and national languages
标准化工作导则 信息分类编码的基本原则和方法 Directives for the work of standardization--The basic principles and methods for information classifying and coding
办公机器和数据处理设备数字应用的键盘布局 Office machines and data processing equipment--Keyboard layouts for numeric applications
汉语标准频谱 The standard spectrum of Chinese speech
耳语标准频谱 The standard spectrum of whispered Chinese speech
中国及世界主要海运贸易港口代码 Codes for China and world main shipping trade ports
信息处理 数据交换用七位编码字符集及其七位与八位扩冲在3.81mm盒式磁带上的实现方法 Information processing--Implementation of the 7-bit coded character set and its 7-bit and 8-bit extensions on 3.81mm magnetic tape cassette for data interchange
信息处理系统 数据通信 高级数据链路控制规程 规程类别汇编 Information processing systems--Data communication--High level data link control procedures--Consolidation of classes of procedures
信息交换用蒙古文16×12、16×8、16×4点阵字模集 16×12, 16×8, 16×4 Dot matrix font set of mongolian characters for information interchange
信息交换用蒙古文16×12、16×8、16×4 点阵数据集 16×12, 16×8, 16×4 Dot matrix data set of mongolian characters for information interchange
信息处理系统 数据通信 高级数据链路控制规程 帧结构 Information processing systems--Data communication--High-level data link control procedures--Frame structure
微处理机系统总线I 8位及16位数据 第一部分: 电气与定时规范的功能说明 Microprocessor system bus I, 8-bit and 16-bit data--Part 1: Functional description with electrical and timing specifications
微处理机系统总线I 8位及16位数据 第二部分: 采用边缘连接器 (直接配合)作为系统总线配置的机械及插针的说明 Microprocessor system bus I, 8-bit and 16-bit data--Part 2: Mechanical and pin descriptions for the system bus configuration with edge connecters (direct)
微处理机系统总线I 8位及16位数据 第三部分: 采用插针和插座连接器 (间接配合)作为系统总线配制的机械及插针的说明 Microprocessor system bus I, 8-bit and 16-bit data--Part 3: Mechanical and pin descriptions for the eurocard configuration with pin and socket (indirect) connecters
半导体集成电路微处理器空白详细规范 (可供认证用) Blank detail specification for microprocessor semiconductor integrated circuits
汉字整字键盘盘面字排列 Layout of the Chinese ideographs on keyboard
信息处理交换用七位编码字符集与电报用五单位电码之间的转换 Conversion between the 7-bit coded character set for information processing interchange and the 5-unit code for the telegraph service
信息处理用机器可读字符编码 (磁墨水字符识别和光学字符识别的字符) Information processing--Coding of machine readable characters (MICR and OCR)
信息处理交换用磁带标号和文卷结构 Information processing--Magnetic tape labelling and fole structure for information interchange
数据通信 高级数据链路控制规程 规程要素汇编 Data communication--High-level data link control procedures--Consolidation of elements of procedures
信息交换用汉字编码字符集 第二辅助集 Code of Chinese ideograms set for information interchange--The 2nd supplementary set
信息交换用汉字编码字符集 第四辅助集 Code of Chinese ideograms set for information interchange--The 4th supplementary set
程序设计语言 PASCAL Programming language Pascal
二进制表示符号与两态码有意义状态之间的对等关系 Equivalence between binary notation symbols and the significant conditions of a two condition code
全国工农业产品(商品、物资)分类与代码 Classification and codes for national industrial and agricultural products (commodities, supplies)
信息处理交换用蒙古文七位和八位编码图形字符集 Mongolian 7-bit and 8-bit coded graphic character sets for information processing interchange
信息处理交换用蒙古文字符集键盘的字母区布局 Keyboard arrangement of the alphabetical area of Mongolian character set for information processing interchange
荣誉称号和荣誉奖章代码 Code of title and medal of honor
专业技术职务代码 Code of professional technical position
纪律处分代码 Code of disciplinary punishment
奖励代码 Code of prize
信息处理 文本通信用编码字符集 第一部分 总则 Information processing--Coded character sets for text cemmunication--Part 1: General introduction
信息处理 文本通信用编码字符集 第二部分 图形字符集 Information processing--Coded character sets for text communication--Part 2: Graphic characters
信息处理 文本通信用编码字符集 第三部分: 按页成象格式用控制功能 Information processing--Coded character sets for text communication--Part 3: Control functions for page-image format
信息技术 软件生存周期过程 Information technology--Software life cycle processes
计算机软件产品开发文件编制指南 Guidelines for computer software product development documentation
办公机器和数据处理设备 打字机功能键符号 Office machines and data processing equipment--Functionkey symbols on typewriters
加法器和计算器 +键键盘的数字区 Adding machines and calculating machines--Numeric section of ten-key keyboards
加法器和计算器 键顶、打印或显示符号 Adding machines and calculating machines--Keytop and printed or displayed symbols
行式打印机通用技术条件 General specification of line printer
串行击打式点阵打印机通用技术条件 General specification of serial impact dot matrix printer
计算机场地安全要求 Safety requirements for computation center field
信息处理 信息交换用9磁道12.7mm(0.5in)磁带成组编码方式246 cpmm (6250 cpi) 的格式及记录 Information processing--9-Track, 12.7mm (0.5in) wide magnetic tape for information interchange--Format and recording,using group coding at 246 cpmm(6250 cpi)
计算机软件测试文件编制规范 Specification for computer software test documentation
信息技术 开放系统互连 基本参考模型 第1部分: 基本模型 Information technology--Open systems interconnection--Basic reference model Part 1: The basic model
信息处理系统 开放系统互连 基本参考模型 第2部分:安全体系结构 Information processing system--Open ystems Interconnection--Basic Reference Model--Part2: Security architecture
信息处理系统 开放系统互连 基本参考模型 第三部分:命名与编址 Information processing system--Open Systems Interconnection--Basic Reference Model--Part3: Naming and addressing
信息处理系统 开放系统互连 基本参考模型 第4部分:管理框架 Information processing systems--Open Systems Interconnection--Basic Reference Model--Part4: Management framework
信息处理 数据存储设备用磁盘盘片 外径 130mm、内径40mm、每道83000 次磁道翻转 Information processing--Magnetic disk for data storage devices-83000 flux transitions per track, 130mm outer diameter, 40mm inner diameter
程序设计语言PL/1 Programming languages PL/1
程序设计语言 PL/1通用子集 Programming languages PL/1 general purpose subset
信息处理系统 计算机处理图形 图形核心系统 (GKS)的功能描述 Information processing systems--Computer graphics-- Graphical kernel system (GKS) functional description
国际单位制代码 Code for international system of units
地质矿产术语分类代码 岩石学 The terminology classification codes of geology and mineral resources Petrology
地质矿产术语分类代码 矿床学 The terminology classification codes of geology and mineral resources The study of ore deposits
地质矿产术语分类代码 煤地质学 The terminology classification codes of geology and mineral resources Coal geology
地质矿产术语分类代码 水文地质学 The terminology classification codes of geology and mineral resources Hydrogeology
地质矿产术语分类代码 工程地质学 The terminology classification codes of geology and mineral resources Engineering geology
地质矿产术语分类代码 地质经济学 The terminology classification codes of geology and mineral resources Geoeconomy
地质矿产术语分类代码 地球物理勘查 The terminology classification codes of geology and mineral resources The geophysical exploration
地质矿产术语分类代码 地球化学勘查 The terminology classification codes of geology and mineral resources The geochemistry exploration
地质矿产术语分类代码 固体矿产普查与勘探 The terminology classification codes of geology and mineral resources The prospecting and exploration of solid mineral resources
信息处理 击打式打印机用连续格式纸通用技术条件 Information processing--General specification for continuous form papers used for impact printers
国家行政机关公文格式 Layout key for official document of administration
未记录计测磁带的物理性能和测试方法 Unrecorded magnetic tapes for instrumentation applications-Physical properties and test methods
信息处理 计测磁带(包括遥测系统)的记录特性 互换要求 Information processing--Recording characteristics of instrumentation magnetic tape (including telemetry systems)--Interchange requirements
信息处理 互换计测磁带用的76mm中心孔通用带盘和盘芯 Information processing--General purpose hubs and reels with 76mm centrehole for magnetic tape used in interchange instrumentation applications
信息处理 互换计测磁带用的精密带盘 Information processing--Precision reels for magnetic tape used in interchange instrumentation applications
信息处理 信息交换用9磁道,12.7mm(0.5in)未记录磁带 32ftpmm(800ftpi)NRZ1制,126ftpmm(3200ftpi)调相制和356ftpmm(9042ftpi)NRZ1制 Information processing--Unrecorded 12.7mm (0.5in)wide magnetic tape for information interchange-32ftpmm(800 ftpi)NRZ1,126ftpmm(3200ftpi)phase encoded and 356ftpmm(9042ftpi) NRZ1
信息处理 互换用未记录计测磁带的一般尺寸要求 Information processing--Unrecorded magnetic tapes for interchange instrumentation applications--General dimensional requirements
信息处理 互换计测磁带用 8mm中心孔通用带盘 Information processing--General purpose reels with 8mm centre hole for magnetic tape for interchange instrumentation applications
微型计算机通用规范 Generic specification for microcomputers
数据通信 37插针及9插针DTE/DCE接口连接器和插针分配 Data communication--37 pin and 9 pin DTE/DCE interface connectors and pin assignments
数据通信 34插针DTE/DCE接口连接器和插针分配 Data communication--34 pin DTE/DCE interface connector and pin assignments
数据通信 15插针DTE/DCE接口连接器和插针分配 Data communication--15 pin DTE/DCE interface connector and pin assignments
加法器 功能键盘的布局 Adding machines-layout of function keyboard
办公机器 双手操作键盘字母数字区的基本布局 Office machines--Basic arrangement for the alphanumeric section of keyboards operated with both hands
信息技术 图片编码方法 第1部分: 标识 Information technology--Picture coding--Part 1: Identification
信息技术 图片编码方法 第2部分:登记规程 Information technology--Picture coding methods--Part 2: Procedure for registration
事物特性表 定义和原理 Tabular layouts of article characteristics--Definitions and principles
县以下行政区划代码编制规则 Rules for the code representation of administrative divisions under counties
出国目的代码 Coding for aim of going abroad
中华人民共和国铁路车站站名代码 Code for railway stations of the People's Republic of China
放射性矿产地质术语分类与代码 Geological terms and their classification and codes of radioactive mineral resources
信息处理 信息交换用八位代码结构和编码规则 Information processing-8-bit code for information interchange--Structure and rules for implementation
信息处理 数据交换用200mm 改进调频制记录的位密度为13262 磁通翻转/ 弧度、道密度为1.9道/毫米的双面软磁盘 第一部分: 尺寸、物理性能和磁性能 Information processing - Data interchange on 200mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, 1,9 tpmm, on both sides--Part 1: Dimensional physical and magnetic characteritics
信息处理 数据交换用200mm 改进调频制记录的位密度为13262 磁通翻转/ 弧度、道密度为1.9道/毫米的双面软磁盘 第二部分: 磁道格式 Information processing - Data interchange on 200mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, 1,9 tpmm, on both sides - Part 2: Track format
信息处理 130mm 未记录的硬扇段单面或双面软磁盘 尺寸、物理性能和磁性能 Information processing - Unrecorded, hard-sectored, 130 mm flexible disk cartridges, one or two-sided use - Dimensional physical and magnetic characteristics
软件工程术语 Software engineering terminology
信息处理用汉字15×16点阵字模集 通信子集 15×16 Dot matrix font set of Chinese ideograms for informat, ion processing communication subset
信息处理用汉字15×16点阵字模数据集 通信子集 15×16 Dot matrix font data set of Chinese ideograms for information processing communication subset
信息处理用汉字24×24点阵字模集 通信子集 24×24 Dot matrix font set of Chinese ideograms for information processing communication subset
信息处理用汉字24×24点阵字模数据集 通信子集 24×24 Dot matrix font set of Chinses ideograms for information processing communication subset
信息技术 汉字字型数据的检测方法 Information technology--Test method of the chinese ideograms font data
公民身份号码 Citizen identification number
公路桥梁命名编号和编码规则 The naming and the coding rules for highway bridge
全国组织机构代码编制规则 Rules of coding for the representation of organization
信息交换用汉字32×32点阵仿宋体字模集及数据集 32×32 Dot matrix Fangsongti font set and data set of Chinese ideograms for information interchange
信息交换用汉字32×32点阵楷体字模集及数据集 32×32 Dot matrix Kaiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字32×32点阵黑体字模集及数据集 32×32 Dot matrix Heiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字36×36点阵宋体字模集及数据集 36×36 Dot matrix Songti font set and data set of Chinese ideograms for information interchange
信息交换用汉字36×36点阵仿宋体字模集及数据集 36×36 Dot matrix Fangsongti font set and data set of Chinese ideograms for information interchange
信息交换用汉字36×36点阵楷体字模集及数据集 36×36 Dot matrix Kaiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字36×36点阵黑体字模集及数据集 36×36 Dot matrix Heiti font set and data set of Chinese ideograms for information interchange
信息技术 汉字编码字符集(基本集)48点阵字型 宋体 Information technology--Chinese ideogram coded character set (basic set)--48 dot matrix font: Song Ti
信息交换用汉字48×48点阵仿宋体字模集及数据集 48×48 Dot matrix Fangsongti font set and data set of Chinese ideograms for information interchange
信息交换用汉字48×48点阵楷体字模集及数据集 48×48 Dot matrix Kaiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字48×48点阵黑体字模集及数据集 48×48 Dot matrix Heiti font set and data set of Chinese ideograms for information interchange
信息处理 信息交换用维吾尔文编码图形字符集 Information processing - Uighur coded graphic character sets for information interchange
信息处理用蒙古文24点阵字模集及数据集 24 Dot matrix font set and data set of Mongolian characters for information processing
信息交换用朝鲜文字编码字符集 Korean character coded character set for information interchange
光学识别用字母数字字符集 第一部分: OCR-A 字符集印刷图象的形状和尺寸 Alphanumeric character sets for optical recognition - Part 1: Character set OCR-A - Shapes and dimensions of the printed image
数据处理 转义序列的登记规程 Data processing--Procedure for registration of escape sequences
信息处理 信息交换用的盒式磁带和卡式磁带的标号和文卷结构 Information processing - Magnetic tape cassette and cartridge labelling and file structure for information interchange
数据处理 过程计算系统和技术过程之间接口的说明 Data processing - Description of interface between process computing system and technical process
使用串行二进制数据交换的数据终端设备和数据电路终接设备之间的通用37插针和9 插针接口 General purpose 37-position and 9-position interface for data terminal equipment and data circuit-terminating equipment employing serial binary data interchange
数据处理词汇 21部分: 过程计算机系统和技术过程间的接口 Data processing - Vocabulary - Part 21: lnterfaces between process computer systems and technical processes
信息处理 磁墨水字符识别 印刷规范 Information processing - Magnetic ink character recognition - Print specifications
汉语信息处理词汇 01部分: 基本术语 Chinese information processing - Vocabulary - Part 01: Fundamental terms
汉语信息处理词汇 02部分: 汉语和汉字 Chinese information processing--Vocabulary--Part 02: Chinese and Chinese character
信息交换用汉字编码字符集 辅助集 Code of Chinese ideogram set for information interchange supplementary set
电子计算机外围设备型号命名方法 Method of model designation for the electronic computer peripheral equipment
经济类型分类与代码 Classification and code for economic categories
干部职务名称代码 Names and codes for the officials positions
单位隶属关系代码 Coding for subordination of organization
单位增员减员种类代码 Coding for kind of increase or decrease number of workers in an organization
表示货币和资金的代码 Codes for the representation of currencies and funds
干部职务级别代码 Codes for cadres positions classes
社会兼职代码 Codes for social moonlights
地理格网 Geographic grid
信息处理系统 开放系统互连 运输服务定义 Information processing systems - Open systems interconnection -Transport service definition
中国海洋调查船代码 Chinese oceanographic research vessel codes
世界海洋名称代码 World ocean/sea area codes
食品添加剂分类和代码 The classification and numbering of food additives
信息处理系统 开放系统互连 面向连接的运输协议规范 Information processing systems?Open systems interconnection - Connection oriented transport protocol specification
计算机软件质量保证计划规范 Specification for computer software quality assurance plan
计算机软件配置管理计划规范 Specification for computer software configuration management plan
光学识别用字母数字字符集 第二部分: OCR-B 字符集印刷图象的形状和尺寸 Alphanumeric character sets for optical recognition - Part 2: Character set OCR-B - Shapes and dimensions of the printed image
信息交换用维吾尔文16、24点阵字母集及数据集 16, 24 Dot matrix font set and data set of uighur character for information interchange
信息处理交换用维吾尔文字符集键盘的字母区布局 Alphabetial area arrangement of keyboary of Uighur character set for information processing interchange
软磁盘驱动器通用技术条件 Generic specification for flexible disk drive
硬磁盘驱动器通用技术条件 Generic specification for hard disk drive
书写纸 Writing paper
程序设计语言 BASIC 子集 Programming languages BASIC subset
商品条码 Bar code for commodity
条码术语 Bar coding terminology
中国标准书号条码 Bar code for China standard book number
库德巴条码 Codabar bar code
三九条码 3 of 9 bar code
信息处理系统 数据库语言SQL Information processing systems - Database language SQL with integrity enhancement
信息技术 通用多八位编码字符集(UCS) 第一部分:体系结构与基本多文种平面 Information technology--Universal multiple--Octet coded character set(UCS)--Part 1: Architecture and basic multilingual plane
汉字智能用户电报在公用电信网上的互通技术条件 字符总表和编码字符集 Specification for interworking of chinese ideogram teletex on public telecommunication networks - Character repertoire and coded character sets
信息交换用汉字编码字符集 第三辅助集 Code of Chinese ideogram set for information interchange 3rd supplementary set
信息交换用汉字编码字符集 第五辅助集 Code of Chinese ideogram set for information interchange 5th supplementary set
数据通信 DTE提供定时的使用X.24 互换电路的DTE到DTE物理连接 Data communication - DTE to DTE physical connection using X.24 interchange circuits with DTE provided timing
信息交换用彝文编码字符集 Yi coded character set for information interchange
信息交换用彝文字符15×16点阵字模集及数据集 15×16 Dot matrix font set and data set of Yi characters for information interchange
书目信息交换用希腊字母编码字符集 Greek alphabet coded character set for bibliographic information interchange
书目信息交换用拉丁字母代码字符扩充集 Extension of the Latin alphabet coded character set for bibliographic information interchange
机械制图用计算机信息交换常用长仿宋字体、代(符)号 基本集 Common long fangsongti letterings and symbols in mechanical drawings and computer for information interchange - Basic set
机械制图用计算机信息交换常用长仿宋字体、代(符)号 16×16点阵字模集 Common long fangsongti letterings and symbols in mechanical drawings and computer for information interchange - 16×16 Dot matrix font set
机械制图用计算机信息交换常用长仿宋字体、代(符)号 16×16点阵字模数据集 Common long fangsongti letterings and symbols in mechanical drawings and computer for information interchange - 16×16 Dot matrix font data set
机械制图用计算机信息交换常用长仿宋矢量字体、代(符)号 Vector common long fangsongti letterings and symbols in mechanical drawings and computer for information interchange
机械制图用计算机信息交换常用长仿宋矢量字体、代(符)号 数据集 Vector common long fangsongti letterings and symbols in mechanical drawings and computer for information interchange - Data set
机械制图用计算机信息交换常用长仿宋字体、代(符)号 24×24点阵字模集 Common long fangsongti letterings and symbols in mechanical drawings and computer for information interchange--24×24 Dot matrix font set
机械制图用计算机信息交换常用长仿宋字体、代(符)号24×24点阵字模数据集 Common long fangsongti letterings and symbols in mechanical drawings and computer for information interchange--24×24 Dot matrix font data set
中国标准音像制品编码 China standard recording code
网络计划技术 常用术语 Terms used in network planning techniques
网络计划技术 网络图画法的一般规定 Generale rule for representation on network planning techniques
网络计划技术在项目计划管理中应用的一般程序 General program of network planning techniques used in project management
信息交换用汉字128×128点阵楷体字模集及数据集 128×128 Dot matrix kaiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字128×128点阵仿宋体字模集及数据集 128×128 Dot matrix Fangsongti font set and data set of Chinese ideograms for information interchange
信息交换用汉字256×256点阵楷体字模集及数据集 256×256 Dot matrix Kaiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字256×256点阵仿宋体字模集及数据集 256×256 Dot matrix Fangsongti font set and data set of Chinese ideograms for information interchange
银行行别和保险公司标识代码 Codes for identification of bank (Insurance company)
全国清算中心代码 Codes of clearing centre for countrywide inter-bank transaction
信息处理 程序构造及其表示的约定 Information processing - Program constructs and conventions for their representation
计算机软件分类与代码 Classification and codes for computer software
信息处理 信息交换用软磁盘盘卷和文卷结构 Information processing - Volume and file structure of flexible disk cartridges for information interchange
信息处理用现代汉语分词规范 Contemporary Chinese language word segmentation specification for information processing
信息处理 数据交换用130mm改进调频制记录的位密度为7958磁通翻转/弧度、道密度为3.8 道/毫米的双面软磁盘 第一部分:尺寸、物理性能和磁性能 Information processing - Data interchange on 130mm(5.25in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 3.8 tpmm (96tpi), on both sides?Part 1: Dimensional, physical and magnetic characteristics
信息处理 数据交换用130mm改进调频制记录的位密度为7958磁通翻转/弧度、道密度为3.8 道/毫米的双面软磁盘 第二部分:磁道格式 A Information processing - Data interchange on 130mm(5.25in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad,3.8 tpmm (96tpi),on both sides - Part 2:Track format A
信息处理 数据交换用130mm改进调频制记录的位密度为7958磁通翻转/弧度、道密度为3.8道/毫米的双面软磁盘 第三部分:磁道格式 B Information processing - Data interchange on 130mm(5.25in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad,3.8 tpmm (96tpi),on both sides - Part 3:Track format B
信息处理 数据交换用 90mm 改进调频制记录的位密度为7958磁通翻转/弧度、每面80磁道的软磁盘 第一部分:尺寸、物理性能和磁性能 Information processing - Data interchange on 90mm(3.5in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad on 80 tracks on each side - Part 1: Dimensional, physical and magnetic characteristics
信息处理 数据交换用 90mm 改进调频制记录的位密度为7958磁通翻转/弧度、每面80磁道的软磁盘 第二部分:磁道格式 Information processing - Data interchange on 90mm(3.5in) flexible disk cartridges using modified frequency modulation recording at 7958 ftprad on 80 tracks oneach side - Part 2:Track format
中型数字电子计算机通用技术条件 Generic specification for medium size computer
821总线1至4字节数据微处理机系统总线 821BUS--Microprocessor system bus for 1 to 4 byte data
术语与辞书条目的记录交换用磁带格式 Magnetic tape exchange format for terminological/lexicographical records (MATER)
学科分类与代码 Classification and code of disciplines
图形信息交换用矢量汉字 单线宋体字模集及数据集 Vector Danxian songti font set and data set of Chinese ideogram for graphics information interchange
图形信息交换用矢量汉字 宋体字模集及数据集 Vector Songti font set and data set of Chinese ideogram for graphics information interchange
图形信息交换用矢量汉字 仿宋体字模集及数据集 Vector Fangsongti font set and data set of Chinese ideogram for graphics information interchange
图形信息交换用矢量汉字 楷体字模集及数据集 Vector Kaiti font set and dada set of Chinese ideogram for graphics information interchange
图形信息交换用矢量汉字 黑体字模集及数据集 Vector Heiti font set and dada set of Chinese ideogram for graphics information interchange
国土基础信息数据分类与代码 Classify and codes for the national land information
文件格式分类与代码编制方法 The classifying and coding method for document format
液压控制阀安装面标识代号 Hydraulic fluid power--Code for identification of valve mounting surfaces
软件维护指南 Guideline on software maintenance
温盘驱动器小型磁头通用技术条件 Generic specification of mini-magnetic head for Winchester disk drive
信息处理用键盘(西文)通用技术条件 General specification for English character keyboard for information processing
9磁道数字磁带机磁头通用技术条件 Generic specification of 9-track digital magnetic head for digital magnetic tape unit
汉字整字键盘通用技术条件 Generic specification for the Chinese ideograph keyboard
办公事务处理用中西文电子打字机通用技术条件 General specification of Chinese and English electronic typewriter for office management
信息处理系统 计算机系统配置图符号及约定 Information processing systems--Computer system configuration diagram symbols and conventions
通用键盘汉字编码输入方法评测规则 The evaluation rule for universal keyboard Chinese character coding input method
初始图形交换规范 Initial graphics exchange specification
信息处理 处理机系统总线接口(欧洲总线A) Information processing--Processor system bus interface (Eurobus A)
信息交换用汉字64×64点阵黑体字模集及数据集 64×64 Dot matrix Heiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字64×64点阵楷体字模集及数据集 64×64 Dot matrix Kaiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字64×64点阵仿宋体字模集及数据集 64×64 Dot matrix Fangsongti font set and data set of Chinese ideograms for information interchange
信息交换用汉字64×64点阵宋体字模集及数据集 64×64 Dot matrix Songti font set and data set of Chinese ideograms for information interchange
信息技术 可移植操作系统界面 第一部分: 系统应用程序界面(POSIX.1) Information technologh--Portable operating system interface for computer environments--Part 1: System application program interface (POSIX.1)
通用商品条码符号位置 Uniform bar code symbol location for commodity
条码符号印制质量的检验 The verification of printed quality of bar code symbol
计算机软件可靠性和可维护性管理 Software reliability and maintainability management
银行卡 Bank cards
微小型计算机系统设备用开关电源通用技术条件 General specification of switching power supply for mini-micro computer system
信息技术设备用不间断电源通用技术条件 Generic specification of uninterruptible power supply for information technical equipment
信息交换用汉字128×128点阵宋体字模集及数据集 128×128 Dot matrix Songti font set and data set of Chinese ideograms for information interchange
信息交换用汉字128×128点阵黑体字模集及数据集 128×128 Dot matrix Heiti font set and data set of Chinese ideograms for information interchange
信息交换用汉字256×256点阵宋体字模集及数据集 256×256 Dot matrix Songti font set and data set of Chinese ideograms for information interchange
信息交换用汉字256×256点阵黑体字模集及数据集 256×256 Dot matrix Heiti font set and data set of Chinese ideograms for information interchange
林业资源分类与代码 森林类型 Classification and codes for forestry resources--Forest types
用于行政、商业和运输业电子数据交换的应用级语法规则 Electronic data interchange for administration,commerce and transport (EDIFACT)--Application level syntax rules
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号:4) 第1部分: 公用的语法规则及语法服务目录 Electronic data interchange for administration,commerce and transport (EDIFACT)--Application level syntax rule (Syntax version number:4)--Part 1: Syntax rules common to all parts,together with syntax service directories for each of the parts
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号:4) 第2部分: 批式电子数据交换专用的语法规则 Electronic data interchange for administration,commerce and transport(EDIFACT)--Application level syntax rules (Syntax version number:4)--Part 2: Syntax rules specific to batch EDI
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号:4) 第3部分: 交互式电子数据交换专用的语法规则 Electronic data interchange for administration,commerce and transport(EDIFACT)--Application level syntax rules(Syntax version number:4)--Part 3: Syntax rules specific to interactive EDI
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号: 4) 第4部分: 批式电子数据交换语法和服务报告报文(报文类型为CONTRL) Electronic data interchange for administration, commerce and transport(EDIFACT)--Application level syntax rules(Syntax version number:4) Part 4: Syntax and service report message for batch EDI (Message type--CONTRL)
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号:4) 第5部分: 批式电子数据交换安全规则(真实性、完整性和源抗抵赖性) Electronic data interchange for administration,commerce and transport(EDIFACT)--Application level syntax rules(Syntax version number:4)--Part 5: Security rules for batch EDI(authenticity,integrity and non-repudiation of origin)
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号:4) 第6部分: 安全鉴别和确认报文(报文类型为AUTACK) Electronic data interchange for administration,commerce and transport(EDIFACT)--Application level syntax rules(Syntax version number:4)--Part 6: Secure authentication and acknowledgement message(message type-AUTACK)
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号:4) 第7部分: 批式电子数据交换安全规则(保密性) Electronic data interchange for administration,commerce and transport(EDIFACT)--Application level syntax rules(Syntax version number:4)--Part 7:Security rules for batch EDI(Confidentiality)
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号:4) 第8部分: 电子数据交换中的相关数据 Electronic data interchange for administration,commerce and transport(EDIFACT)--Application level syntax rules(Syntax version number:4)--Part 8: Associated data in EDI
用于行政、商业和运输业电子数据交换的应用级语法规则(语法版本号:4) 第9部分:安全密钥和证书管理报文(报文类型为KEYMAN) Electronic data interchange for administration,commerce and transport(EDIFACT)--Application level syntax rules (Syntax version number:4) Part 9: Security key and certificate management message(message type-KEYMAN)
信息处理 文本和办公系统 标准通用置标语言(SGML) Information processing--Text and office systems--Standard generalized markup language(SGML)
信息处理 图片编码表示 第一部分: 在七位或八位环境中图片表示的编码原则 Information processing--Coded representation of pictures--Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
固定资产分类与代码 Classification and codes for fixed assets
电子数据交换术语 The terms of electronic data interchange
识别卡 物理特性 Identification cards--Physical characteristics
数字声音信号源编码技术规范 The specifications for digital audio source coding
货物运输常用残损代码 General codes for broken and damaged cargo in transport
全国干部、人事管理信息系统指标体系分类与代码 Classification and code of indicators of national cadre and personnel management information system
CAD 标准件图形文件 几何图形和特性规范 铆钉 CAD standard parts file--Specification of geometry and parameters--Revets
CAD 标准件图形文件 几何图形和特性规范 销 CAD standard parts file--Specification of geometry and parameters--Pins
CAD 标准件图形文件 几何图形和特性规范 螺母 CAD Standard parts file--Specification of geometry and parameters--Nuts
CAD 标准件图形文件 几何图形和特性规范 螺栓 CAD Standard parts file--Specification of geometry and paramelers--Bolts
CAD 标准件图形文件 几何图形和特性规范 螺钉 CAD standard parts file--Specification of geometry and parameters--Screws
CAD 标准件图形文件 几何图形和特性规范 挡圈 CAD Standard parts file--Specification of geometry and parameters --Rings
CAD 标准件图形文件 几何图形和特性规范 垫圈 CAD standard parts file--Specification of geometry and parameters--Washers
CAD标准件图形文件 几何图形和特性规范 键 CAD standard parts file--Specification of geometry and parameters--Key
CAD标准件图形文件 几何图形和特性规范 滚动轴承 CAD standard parts file--Specification of geometry and parameters--Rolling bearings
集装箱常用残损代码 General codes for broken and damaged container
识别卡 记录技术 第1部分: 凸印 Identification cards--Recording technique--Part 1: Embossing
识别卡 记录技术 第2部分: 磁条 Identification cards--Recording technique--Part 2: Magnetic stripe
识别卡 记录技术 第3部分: ID-1型卡上凸印字符的位置 Identification cards--Recording technique--Part 3: Location of embossed characters on ID-1 cards
识别卡 记录技术 第4部分: 只读磁道的第1磁道和第2磁道的位置 Identification cards--Recording technique--Part 4: Location of read-only magnetic tracks--Tracks 1 and 2
识别卡 记录技术 第5部分: 读写磁道的第3磁道的位置 Identification cards--Recording technique--Part 5: Location of read--write magnetic track--Track 3
信息处理系统 计算机图形 存储和传送图片描述信息的元文卷 第一部分: 功能描述 Information processing systems--Computer graphics--Metafile for storage and transfer of picture description information--Part 1: Functional specification
信息处理系统 计算机图形 存储和传送图片描述信息的元文卷 第二部分: 字符编码 Information processing systems--Computer graphics--Metafile for storage and transfer of picture description information--Part 2: Character encoding
信息技术 计算机图形 存储和传送图片描述信息的元文卷 第3部分:二进制遍码 Information technology--Computer graphics--Metafile for storage and transfer of picture description information--Part 3: Binary encoding
信息技术 计算机图形 存储和传送图片描述信息的元文卷 第四部分:清晰正文编码 Information technology--Computer graphics--Metafile for storage and transfer of picture description information--Part 4: Clear text encoding
信息处理系统 未记录软磁盘的标志 Information processing systems--Designation of unrecorded flexible disk cartridges
信息处理 数据通信 使用25插针连接器的DTE/DCE 接口备用控制操作 Information processing--Data communication--DTE/DCE interface back-up control operation using the 25-pole connector
信息处理系统 数据通信 多链路规程 Information processing system--Data communication--Multilink procedures
信息技术 数据通信 25插针DTE/DCE 接口连接器及接触件号分配 Information technology--Data communication--25-pole DTE/DCE interface connector and contact number assignments
信息处理系统 数据通信 网络服务定义 Information processing systems--Data communications--Network service definition
信息处理系统 数据通信 双扭线多点互连 Information processing systems--Data communication--Twisted pair multipoint interconnections
信息处理系统 开放系统互连 面向连接的基本会话服务定义 Information processing systems--Open Systems Interconnection--Basic connection oriented session service definition
信息处理系统 开放系统互连 服务约定 Information processing systems--Open systems interconnection--Service conventions
信息处理 数据交换用90mm改进调频制记录的位密度为15916 磁通翻转/弧度、每面80条磁道的软磁盘 第一部分:尺寸、物理性能和磁性能 Information processing systems--Data interchange on 90mm (3.5in) flexible disk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on each side--Part 1: Dimensional, physical and magnetic characteristics
信息处理 数据交换用90mm改进调频制记录的位密度为15916磁通翻转/弧度、每面80条磁通的软磁盘 第二部分, 磁通格式 Information processing--Data interchange on 90mm flexible dlisk cartridges using modified frequency modulation recording at 15916 ftprad, on 80 tracks on eachsize--Part 2: Track format
信息处理 数据交换用130mm改进调频制记录的位密度为13262 磁通翻转/弧度、每面80条磁道的软磁盘 第一部分:尺寸、物理性能和磁性能 Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad on 80 tracks on each side--Part 1: Dimensional, physical and magnetic characteristics
信息处理 数据交换用130mm改进调频制记录的位密度为13262磁通翻转/弧度、每面80条磁道的软磁盘 第二部分: 磁道格式 A ( 用于77条磁道) Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side--Part 2:Track format A for 77 tracks
信息处理 数据交换用130mm改进调频制记录的位密度为13262磁通翻转/弧度、每面80条磁道的软磁盘 第三部分: 磁道格式B(用于80条磁道) Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 13262 ftprad, on 80 tracks on each side--Part 3: Track format B for 80 tracks
信息处理 数据交换用130mm双频制记录的位密度为7958 磁通翻转/弧度、道密度为1.9道/毫米的单面软磁盘 第一部分:尺寸、物理性能和磁性能 Information processing--Data interchange on 130mm flexible disk eartridges using two-frequency recording at 7958 ftprad, 1.9tpmm, on one side--Part 1: Dimensional, physical and magnetic characteristics
信息处理 数据交换用130mm双频制记录的位密度为7958 磁通翻转/弧度、道密度为1.9道/毫米的单面软磁盘 第2部分: 磁道格式 Information processing--Data interchange on 130mm flexible disk cartridges using two-frequency recording at 7958 ftprad, 1.9tpmm, on one side--Part 2: Track format
信息处理 数据交换用200mm双频制记录的位密度为13262磁通翻转/弧度、道密度为1.9道/毫米的单面软磁盘 第一部分: 尺寸、物理性能和磁性能 Information processing--Data interchange on 200mm flexible disk cartridges using two-frequency recording at 13262 ftprad, 1.9tpmm, on one side--Part 1: Dimensional, physical and magnetic characteristics
信息处理 数据交换用200mm双频制记录的位密度为13262磁通翻转/弧度、道密度为1.9道/毫米的单面软磁盘 第二部分: 磁道格式 Information processing--Data interchange on 200mm flexible disk cartridges using two-frequency recording at 13262 ftprad, 1.9tpmm, on one side--Part 2: Track format
信息处理 信息交换用软磁盘文卷结构和标号 Information processing--File structure and labelling of flexible disk cartridges for information interchange
产生报文的银行卡 交换报文规范 金融交易内容 Bank card originated messages--Interchange message specifications--Content for financial transactions
林业资源分类与代码 林木病害 Classification and codes for forestry resources--Tree diseases
DOS中文信息处理系统接口规范 Specification of DOS Chinese information processing system interface
贸易数据元目录 标准数据元 Trade data elements directory--Standard data elements
识别卡 卡产生的信息 金融交易的内容 Identification cards--Card originated messages--Content for financial transactions
程序设计语言C Programming languages-C
信息处理 八位单字节编码图形字符集 第一部分: 拉丁字母一 Information processing--8-bit single-byte coded graphic character sets--Part 1: Latin alphabet No.1
信息处理 八位单字节编码图形字符集 第二部分: 拉丁字母二 Information processing--8-bit single-byte coded graphc character sets--Part 2: Latin alphabet No.2
信息处理 八位单字节编码图形字符集 第三部分: 拉丁字母三 Information processing--8-bit single-byte coded graphc character sets--Part 3: Latin alphabet No.3
信息处理 八位单字节编码图形字符集 第四部分: 拉丁字母四 Information processing--8-bit single-byte coded graphc character sets--Part 4: Latin alphabet No.4
信息处理 八位单字节编码图形字符集 第7部分:拉丁/希腊字母 Information processing--8-bit single-byte coded graphic character sets--Part 7: Latin/Greek alphabet
信息处理系统 开放系统互连 网络层的内部组织结构 Information processing systems--Open systems Interconnection--Internal organization of the network layer
8位微型计算机STD总线 Standard for an 8-bit microcomputer bus system:STD bus
信息处理系统 系统间信息交换 DTE/DCE接口处同步传输的信号质量 Information processing systems--Information exchange between systems-Synchronous transmission signal quality at DTE/DCE interfaces
信息处理 64bit分组密码算法的工作方式 Information processing--Modes of operation for a 64-bit block cipher algorithm
信息处理 数据加密 物理层互操作性要求 Information processing--Data encipherment-Physical layer interoperability requirements
中国油、气田名称代码 Codes for names of oil and gas fields of China
外贸出口单证格式 商业发票 Form of document for export trade--Commercial invoice
外贸出口单证格式 装箱单 Form of document for export trade--Packing list
外贸出口单证格式 装运声明 Form of document for export trade--Declaration of shipment
外贸出口单证格式 中华人民共和国出口货物原产地证明书 Form of document for export trade--Certificate of origin of the People's Republic of China
中华人民共和国进口许可证格式 Form of import licence of the People's Republic of China
中华人民共和国出口许可证格式 Form of export licence of the People's Republic of China
国际集装箱货运交接方式代码 Codes of international container interchange mode
国际航运货物装卸费用和船舶租赁方式条款代码 Codes of stevedorage and chartering mode terms for international shipping
国际贸易方式代码 Codes for international trade mode
国际贸易单证代码 Codes for international trade document
国际贸易交货条款代码 Codes for terms of delivery
电子数据交换用支付方式代码 Payment means codes for EDI
贸易单元128条码 Bar code 128 for trade unit
中华人民共和国口岸及有关地点代码 Code for ports and other locations of the people's Republic of China
信息处理系统 小型计算机系统接口 Information processing systems--Small computer system interface(SCSI)
信息处理系统 数据库语言NDL Information processing systems--Database language NDL
信息处理 单命中判定表规范 Information processing--Specification of single-hit decision tables
信息处理 SGML支持设施 SGML文件交换格式(SDIF) Information processing--SGML support facilities--SGML document interchange format(SDIF)
信息处理 SGML 支持设施 公用文本拥有者标识符登记规程 Information processing--SGML support facilities--Registration procedures for public text owner identifiers
信息技术 系统间远程通信和信息交换局域网和城域网 特定要求 第1部分: 局域网标准综述 Information technology--Telecommunication and information exchange between systems--Local and metropolitan area networks--Specific requirements--Part 1: Overview of local area network standards
信息处理系统 局域网 第2部分: 逻辑链路控制 Information processing systems--Local area networks--Part 2: Logical link control
信息处理系统 局域网 第3部分: 带碰撞检测的载波侦听多址访问(CSMA/CD)的访问方法和物理层规范 Information processing systems--Local area networks--Part 3: Carrier sense multiple access with collision detection(CSMA/CD)--access method and physical layer specifications
信息处理系统 局域网 第4部分: 令牌传递总线访问方法和物理层规范 Information processing systems--Local area network--Part 4: Token-passing bus access method and physical layer specifications
信息技术 局域网和城域网 第5部分:令牌环访问方法和物理层规范 Information technology--Local and metropolitan area networks--Part 5: Token ring access method and physical layer specifications
用于行政、商业和运输业电子数据交换的段目录 第1部分:批式电子数据交换段目录 Electronic data interchange for administration,commerce and transport(EDIFACT)--Segment directory--Part 1: Segment directory for batch EDI
用于行政、商业和运输业电子数据交换的段目录 第2部分:交互式电子数据交换段目录 Electronic data interchange for administration,commerce and transport (EDIFACT)--Segment directory--Part 2: Segment directory for interactive-EDI
用于行政、商业和运输业电子数据交换的复合数据元目录 Electronic data interchange for administration,commerce and transport (EDIFACT)--Composite data elements directory
用于行政、商业和运输业电子数据交换的复合数据元目录 第1部分:批式电子数据交换复合数据元目录 Electronic data interchange for administration,commerce and transport (EDIFACT)-Composite data element directory--Part 1: Composite data element directory for Batch EDI
用于行政、商业和运输业电子数据交换的复合数据元目录 第2部分:交互式电子数据交换复合数据元目录 Electronic data interchange for administration,commerce and transport (EDIFACT)--Composite data element directory--Part 2: Composite data element directory for interactive EDI
识别卡 发卡者标识 第1部分: 编号体系 Identification cards--Identification of issuers--Part 1: Numbering system
信息处理系统 开放系统互连 面向连接的表示服务定义 Information processing systems--Open Systems Interconnection--Connection oriented presentation service definition
信息处理系统 开放系统互连 面向连接的表示协议规范 Information processing systems--Open Systems Interconnection--Connection oriented presentation protocol specification
信息处理 按记录组处理顺序文卷的程序流程 Information processing--Program flow for processing sequential files in terms of record groups
信息技术 系统之间的远程通信和信息交换 高级数据链路控制(HDLC)规程 通用XID帧信息字段内容和格式 Information technology--Telecommunications and information exchange between systems--High-level data link control (HDLC)procedures--General purpose XID frame information field content and format
汉字键盘输入用通用词语集 General word set for Chinese character keyboard input
金融电子化基本术语 The basic terminology of financial computerization
技术产品文件 计算机辅助设计与制图 词汇 Technical product documentation--Requirements for computer aided design and drafting--Vocabulary
林业资源分类与代码 林木害虫 Classification and codes for forestry resources--Injurious tree-insects
林业资源分类与代码 自然保护区 Classification and codes for forestry resources--Natural reserves
信息技术 安全技术 实体鉴别 第1部分: 概述 Information technology--Security techniques--Entity authentication--Part 1: General
信息技术 安全技术 实体鉴别 第2部分: 采用对称加密算法的机制 Information technology--Security techniques--Entity authentication--Part 2: Mechanisms using symmetric encipherment algorithms
信息技术 安全技术 实体鉴别 第3部分: 用非对称签名技术的机制 Information technology--Security technigues--Entity authentication--Part 3: Mechanisms using asymmetric signature techniques
信息技术 安全技术 实体鉴别 第4部分: 采用密码校验函数的机制 Information technology--Security techniques--Entity authentication--Part 4: Mechanisms using a cryptographic check function
信息技术 安全技术 带消息恢复的数字签名方案 Information technology--Security techniques--Digital signature scheme giving message recovery
信息技术 安全技术 用块密码算法 作密码校验函数的数据完整性机制 Information technology--Security techniques--Data integrity mechanism using a cryptographic check function employing a block cipher algorithm
软件支持环境 Software support environment
存折本的磁条 Magnetic stripes on savingsbooks
信息处理 文本与办公系统 办公文件体系结构(ODA)和交换格式 第1部分:引言和总则 Information processing--Text and office systems--Office document architecture(ODA) and interchange format--Part 1: Introduction and general principles
信息处理 文本与办公系统 办公文件体系结构(ODA)和交换格式 第二部分:文件结构 Information processing--Text and office systems--Office document architecture(ODA) and interchange format--Part 2: Document structures
信息技术 开放文件体系结构(ODA)和交换格式 第3部分: ODA文件操纵的抽象界面 Information technology--Open document Architecture(ODA) and interchange format--Part 3: Abstract interface for the manipulation of ODA documents
信息处理 文本与办公系统 办公文件体系结构(ODA)和交换格式 第四部分:文件轮廓 Information processing--Text and office systems--Office document architecture (ODA) and interchange format--Part 4: Document profile
信息处理 文本与办公系统 办公文件体系结构(ODA)和交换格式 第五部分:办公文件交换格式(ODIF) Information processing--Text and office systems--Office document architecture (ODA) and interchange format--Part 5:Office document interchange format (ODIF)
信息处理 文本与办公系统 办公文件体系结构(ODA)和交换格式 第六部分:字符内容体系结构 Information processing--Text and office systems--Office document architecture (ODA) and interchange format--Part 6:Character content architectures
信息处理 文本与办公系统 办公文件体系结构(ODA)和交换格式 第七部分:光栅图形体系结构 Information processing--Text and office systems--Office document architecture (ODA) and interchange format--Part 7:Raster graphics content architectures
信息处理 文本与办公系统 办公文件体系结构(ODA)和交换格式 第八部分:几何图形内容体系结构 Information processing--Text and office systems--Office Document Architecture(ODA)and interchange format--Part 8: Geometric graphics content architectures
信息处理 文本和办公系统 办公文件体系结构(ODA)和交换格式 第10部分:形式规范 Information processing--Text and office systems--Office document architecture(ODA) and interchange format--Part 10: Formal specifications
用于行政、商业和运输业电子数据交换的报文设计规则 Edifact message design rules for edi
银行电信 资金转账报文 第1部分:词汇和数据元 Bank telecommunication--Funds transfer message--Part 1: Vocabulary and data elements
可编程序控制器 第1部分: 通用信息 Programmable controllers--Part 1: Grneral information
可编程序控制器 第2部分: 设备特性 Programmable controllers--Part 2: Equipment characteristics
可编程序控制器 第3部分: 编程语言 Programmable controllers--Part 3: Programming languages
可编程序控制器 第4部分: 用户导则 Programmable controllers--Part 4: User guidelines
信息技术 软件产品评价 质量特性及其使用指南 Information technology--Software product evaluation--Quality characteristics and guidelines for their use
信息处理系统 开放系统互连 抽象语法记法--(ASN.1)规范 Information processing system--Open systems interconnection--Specification of abstract syntax notation one (ASN.1)
信息处理系统 开放系统互连 抽象语法记法--(ASN.1)基本编码规则规范 Information processing system--Open systems interconnection--Specification of basic encoding rules for abstract syntax notation one (ASN.1)
信息技术 开放系统互连 目录 第1部分:概念、模型和服务的概述 Information technology--Open systems-interconnection--The directory Part1: Overvien of convepts, models and seruices
信息技术 开放系统互连 目录 第2部分:模型 Information technology--Open systems-interconnection--The directory-- Part 2: Models
信息技术 开放系统互连 目录 第3部分:抽象服务定义 Information technology--Open systems-interconnection--The directory--Part 3:Abstract service definition
信息技术 开放系统互连 目录 第4部分:分布式操作规程 Information technology--Open systems interconnection--The directory-- Part 4:Procedures for distributed operation
信息技术 开放系统互连 目录 第5部分:协议规范 Information technology--Open systems interconnection--The directory-- Part 5:Protocol specifications
信息技术 开放系统互连 目录 第6部分:选择属性类型 Information technology--Open systems interconnection--The directory-- Part 6: Selected attribute types
信息技术 开放系统互连 目录 第7部分:选择客体类 Information technology--Open systems interconnection--The directory--Part 7: Selected object classes
信息技术 开放系统互连 目录 第8部分:鉴别框架 Information technology--Open systems interconnection--The directory--Part 8: Authentication framework
信息技术 文本通信 面向信报的文本交换系统 第1部分: 系统和服务概论 Information technology--Text communication--Message--Oriented text interchange system (MOTIS)--Part 1: System and service overview
信息技术 文本通信 面向信报的文本交换系统 第2部分:总体结构 Information technology--Text comnunication--Message--Oriented text interchange system (MOTIS)--Part 2: 0verall architecture
信息技术 文本通信 面向信报的文本交换系统 第3部分:抽象服务定义约定 Information technology--Text communication--Message--Oriented text interchange system (MOTIS)--Part 3: Abstrach service defintion conventions
信息技术 文本通信 面向信报的文本交换系统 第4部分:抽象服务定义和规程 Information technology--Text communication--Message--Oriented text interchange system (MOTIS)--Part 4: Abstract service definition and procedures
信息技术 文本通信 面向信报的文本交换系统 第5部分:信报存储器:抽象服务定义 Information technology--Text communication--Message--Oriented text interchange system (MOTIS)--Part 5: Message store:Abstract service definition
信息技术 文本通信 面向信报的文本交换系统 第6部分:协议规范 Information technology--Text communication--Message--Oriented text interchange system (MOTIS)--Part 6: Protocol specifications
信息技术 文本通信 面向信报的文本交换系统 第7部分:人际信报系统 Information technology--Text communication--Message--Oriented Text Interchange systems (MOTIS)--Part 7: Interpersonal messaging system
民用航空业信息分类与代码 Information classification and codes of civil aviation
信息交换用汉字编码字符集 第七辅助集 Code of chinese ideograms set for information interchange--The 7th supplementary set
劳动合同制用人形式分类与代码 Classification and code of employment form in labour contract system
信息技术 平衡互换电路的电隔离 Information technology--Galvanic isolation of balanced interchange circuits
信息处理系统 数据通信 使用测试环路的自动故障隔离规程 Information processing systems--Data communciation--Automatic fault isolation procedures using test loops
信息处理系统 开放系统互连 文卷传送、访问和管理 第1部分: 概论 Information processing system--Open system interconnection--File transfer, access and management--Part 1:General introduction
信息处理系统 开放系统互连 文卷传送、访问和管理 第2部分: 虚文卷存储器定义 Information processing systems--Open systems interconnection--File transfer,access and management--Part 2: Virtual filestore definition
信息处理系统 开放系统互连 文卷传送、访问和管理 第3部分: 文卷服务定义 Information processing systems--Open systems interconnection--File transfer, access and management--Part 3: File service definition
信息处理系统 开放系统互连 文卷传送、访问和管理 第4部分: 文卷协议规范 Information processing systems--Open systems interconnection--File transfer, access and management--Part 4: File protocol specification
信息处理系统 开放系统互连 文卷传送、访问和管理 第5部分:协议实现一致性声名形式表 Information processing systems--Open systems interconnection--File transfer,access and management--Part 5: Protocol implementation conformance statement proforma
信息技术 系统间的远程通信和信息交换 提供和支持OSI网络服务的协议组合 第1部分: 一般原则 Information techmology--Telecommunications and information exchcnge between systems--Protocol combinations to provides and support the osi netword service--Part 1: General principles
信息技术 系统间的远程通信和信息交换 提供和支持OSI网络服务的协议组合 第2部分: 提供和支持连接方式的网络服务 Information techmology--Telecommunications and information exchxnge between systems--Protocol combinations to provides and support the OSI netword service--Part 2: Provision and suuport of the connection--mode netwok service
信息技术 系统间的远程通信和信息交换 提供和支持OSI网络服务的协议组合 第三部分:提供和支持无连接方式的网络服务 Information technology--Telecommunication and information exchange between systems--Protocol combinations to provides and support the OSI network service--Part 3: Provision and suppot of the connectionless--Mode network service
消息处理 电子数据交换消息处理业务 Message handling--Electronic data interchange messaging service
信息技术 开放系统互连 公共管理信息服务定义 Information technology--Open systems interconnection--Common management information service definition
信息技术 开放系统互连 公共管理信息协议 第1部分:规范 Information technology--Open system interconnection--Common management information protocol--Part 1: Specification
信息技术 开放系统互连 公共管理信息协议 第2部分: 协议实现一致性声明形式表 Information technology--Open systems interconnection--Common management information protocol--Part 2: Protocol Implementation Conformance Statement Proforma
信息技术 开放系统互连 局域网媒体访问控制(MAC)服务定义 Information technology--Open systems interconnection--Local area networks--Medium access control (MAC) service definition
信息技术 信息资源词典系统(IRDS)框架 Information technology--Information resource dictionary system (IRDS) framework
信息技术 文本通信 标准页面描述语言(SPDL) Information technology--Text communication--Standard of page description language(SPDL)
识别卡 带触点的集成电路卡 第1部分:物理特性 Identification cards--Integrated circuit(s) cards with contacts--Part 1: Physical characteristics
识别卡 带触点的集成电路卡 第2部分:触点的尺寸和位置 Identification cards--Integrated circuit(s) cards with contacts--Part 2: Dimensions and location of the contacts
识别卡 带触点的集成电路卡 第3部分:电信号和传输协议 Identification cards--Integrated circuit(s) cards with contacts--Part 3: Electronic signals and transmission protocols
识别卡 带触点的集成电路卡 第6部分: 行业间数据元 Identification cards--Integrated circuit(s) cards with contacts--Part 6: Interindustrv data elements
识别卡 带触点的集成电路卡 第7部分: 用于结构化卡查询语言(SCQL)的行业间命令 Identification cards--Integrated circuit(s) cards with contacts--Part 7: Interindustry commands for structured Card query language(SCQL)
开放文件体系结构(ODA)和互换格式 文件结构 Open document architecture(ODA) and inter change format--Document structures
综合业务数字网帧模式承载业务 数据链路层规范 ISDN data link layer specification for frame mode bearer services
ISDN(2B+D)NT1用户-网络接口设备技术要求 Technical requirements for ISDN(2B+D)NT1 user-network interface equipment
工业自动化系统与集成 产品数据表达和交换 第11部分:描述方法:EXPRESS语言参考手册 Industrial automation systems and integration--Product data representation and exchange(STEP)--Part 11:Descriptive methods the EXPRESS--Language reference manual
信息处理系统 光纤分布式数据接口(FDDI)第1部分:令牌环物理层协议(PHY) Information processing systems--Fibre distributed data interface (FDDI)--Part 1: Token ring physical layer protocol (PHY)
信息处理系统 光纤分布式数据接口(FDDI) 第2部分:令牌环媒体访问控制(MAC) Information processing systems--Fibre distributed data lnterface (FDDI)--Part 2: Token ring media access control (MAC)
信息处理系统 光纤分布式数据接口 (FDDI) 第3部分:令牌环物理层媒体相关部分(PMD) Information processing systems--Fibre distributed data interface (FDDI)--Part 3: Physical layer medium dependent(PMD)
信息技术 光纤分布式数据接口(FDDI) 第5部分: 混合环控制(HRC) Information technology--Fibre Distributed Data Interface (FDDI)--Part 5: Hybrid Ring Control(HRC)
软件文档管理指南 Guidelines for the management of software documentation
信息技术 开放系统中文界面规范 Information technology--Chinese interface specifications of open system
信息技术 国际标准化轮廓的框架和分类方法 第1部分:框架 Information technology--Framework and taxonomy of international standardized profiles--Part 1: Framework
信息技术 国际标准化轮廓的框架和分类方法 第2部分:OSI轮廓用的原则和分类方法 Information technology--Framework and taxonomy of international standardized profiles--Part 2: Principles and taxonomy for OSI profiles
信息交换用彝文字符24×24点阵字模集及数据集 24×24 Dot matrix font set and data set of Yi character for information interchange
信息技术 信息交换用数据描述文卷规范 Information technology--Specification for a data descriptive file for information interchange
信息技术 打印设备 测量打印机吞吐量的方法 Information technology--Printing devices--Method for measuring printer throughput
信息技术 信息交换用数据压缩 具有嵌人字典的自适应编码 DCLZ算法 Information technology--Data compression for information interchange--Adaptive coding with embedded dictionary--DCLZ algorithm
信息处理系统 开放系统互连 联系控制服务元素协议规范 Information processing systems--Open systems interconnection--Protocol specification for the association control service element
信息处理系统 开放系统互连 联系控制服务元素服务定义 Information processing systems--Open systems interconnection--Service definition for the association control service element
环境污染类别代码 Codes for environmental pollution categories
环境污染源类别代码 Codes for environmental pollution source categories
银行业 银行电信报文 银行标识代码 Banking--Banking telecommunication messages--Bank identifier codes
计算机硬件分类与代码 Classification and codes for computer hardware
信息技术 提供OSI无连接方式运输服务的协议 Information technology--Protocol for providing the OSI connectionless--Mode transport service
信息技术 系统间的远程通信和信息交换X.25DTE一致性测试 第二部分:数据链路层一致性测试 Information technology--Thelecommunications and information exchange between systems--X.25-DTE conformance testing--Part 2: Data link layer conformance test suite
信息技术 系统间的远程通信和信息交换 X.25DTE一致性测试 第3部分:分组层一致性测试套 Information technology--Telecommunications and information exchange between systems--X.25-DTE conformance testing--Part 3: Packet layer conformance test suite
储运单元条码 Bar code in dispatch unit
中国煤炭编码系统 Codification systems for Chinese coals
金融交易卡 使用集成电路卡的金融交易系统的安全结构 第1部分:卡的生命周期 Financial transaction cards--Security architecture of financial transaction systems using integrated circuit cards--Part 1:Card life cycle
金融交易卡 集成电路卡与卡接受设备之间的报文 第1部分:概念与结构 Financial transaction cards--Messages between the integrated circuit card and the card accepting device--Part 1:Concepts and structures
中国含油气盆地及次级构造单元名称代码 Cords for name of petroliferous basin and inferior tectonic unit of China
信息技术 通用多八位编码字符集(Ⅰ区) 汉字24点阵字型 宋体 Information technology--Universal multiple--Octet coded character set (I zone)--24-dots matrix font of ideogram--Song Ti
信息技术 通用多八位编码字符集(Ⅰ区) 汉字48点阵字型 第1部分:宋体 Information technology--Universal multiple--Octet coded character set(I zone)--48-dots matrix font of ideogram--Part 1: Song Ti
信息技术 开放系统互连 作业传送和操纵的概念与服务 Information technology--Open systems lnterconnection--Job transfer and manipulation concepts and services
无碳复写纸 Carbonless copy paper
中国标准刊号(ISSN部分)条码 Bar code for ISSN in China standard serials number
位置码 Location number
交插二五条码 Interleaved 2 of 5 bar code
地理点位置的纬度、经度和高程的标准表示法 Standard represesentation of latitude, longitude and altitude for geographic point locations
用于行政、商业和运输业电子数据交换的代码表 Electronie data interchange for administratim,commerce and transpnt (EDIFACT)-code list
用于行政、商业和运输业电子数据交换的标准报文和目录文件的编写规则 EDIFACT Rules for presentation of standardized message and directories documentation
高等学校本科、专科专业名称代码 Code of normal and short-cycle speciality
信息技术 信息交换用藏文编码字符集 基本集 Information technology--Tibetan coded character sets for information interchange--Basic set
信息技术 藏文编码字符集(基本集) 24×48点阵字型 第1部分: 白体 Information technology--Tibetan coded character set (basic set)--24×48 dots matrix font--Part 1: Bai Ti
国际贸易付款方式代码 Codes for international trade payment
国际贸易合同代码规范 Specification of international trade contract codes
信息技术 字型信息交换 第1部分: 体系结构 Information technology--Font information interchange--Part 1: Architecture
信息技术 字型信息交换 第2部分: 交换格式 Information technology--Font information interchange--Part 2: Interchange format
信息技术 字型信息交换 第3部分: 字形形状表示 Information technology--Font information interchange--Part 3: Glyph shape representation
信息技术 超媒体/时基结构化语言(HyTime) Information technology--Hypermedia/Time-based Structuring Language(HyTime)
信息技术 连接到综合业务数字网(ISDN)的包式终端设备提供OSI连接方式网络服务 Information technology--Provision of the OSI connection-mode network service by packet mode terminal equipment connected to an integrated services digital network(ISDN)
信息技术 开放系统互连 作业传送和操纵基本类及完全协议规范 Information technology--Open systems interconnection--Specification of the basic class and full protocol for job transfer and manipulation
用于行政、商业和运输业电子数据交换的技术评审指南 第1部分: 批式电子数据交换技术评审审核表 EDIFACT Technical assessment guidelines--Part 1: batch edi technical assessment check list
用于行政、商业和运输业电子数据交换的技术评审指南 第2部分: 交互式电子数据交换技术评审审核表 EDIFACT technical assessment guidelines Part 2: Interactive EDI technical assessment check list
信息技术 只读120mm数据光盘(CD-ROM)的数据交换 Information technology--Data interchange on read-only 120 mm optical data disks(CD-ROM)
信息技术 信息交换用只读光盘 存储器(CD-ROM)的盘卷和文卷结构 Information processing--Volume and file structure of CD-ROM for information interchange
信息技术 信息交换用130mm可重写盒式光盘 Information technology--130mm rewritable optical disk cartridge for information interchange
信息技术 文本与办公系统 分布式办公应用模型 第1部分: 一般模型 Information technology--Text and office systems--Distributed--office-applications-model--Part 1: General model
信息技术 文本与办公系统 分布式办公应用模型 第2部分: 可辨别客体引用和相关规程 Information technology--Text and office systems--Distributed-office-applications-model--Part 2: Distinguished-object-reference and associated procedures
信息技术 文本与办公系统 文件归档和检索(DFR) 第1部分: 抽象服务定义和规程 Information technology--Text and office systems--Document Filing and Retrieval(DFR)--Part 1: Abstract services definition and procedures
信息技术 文本与办公系统 文件归档和检索(DFR) 第2部分: 协议规范 Information technology--Text and office systems--Document Filing and retrieval(DFR)--Part 2: Protocol specification
信息技术 数据通信 数据终端设备用X.25包层协议 Information technology--Data communication-X.25 Packet Layer Protocol for Data Terminal Equipment
信息技术 远程操作 第1部分: 概念、模型和记法 Information technology--Remote operations Part 1: Concepts,model and notation
信息技术 远程操作 第2部分: OSI实现 远程操作服务元素(ROSE)服务定义 Information technology--Remote operations--Part 2: OSI realizations--Remote Operations Service Element(ROSE) service definition
信息技术 远程操作 第3部分: OSI实现 远程操作服务元素(ROSE)协议规范 Information technology--Remote operations--Part 3: OSI realizations--Remote Operations Service Element(ROSE) protocol specification
信息技术 系统间远程通信和信息交换 使用X.25提供OSI连接方式网络服务 Information technology--Telecommunica-tions and information exchange between systems-Use of X.25 to provide the OSI Connection-mode Network Service
条码应用标识 Application identification for bar code
全国组织机构代码信息数据库(基本库)机读格式规范 The specification for machine readable format for CHINA national organization registration code information data base(basic base)
信息技术 开放系统互连 系统管理综述 Information technology--Open systems interconnection--Systems management overview
信息技术 开放系统互连 系统管理 第1部分; 客体管理功能 Information technology--Open systems interconnection--Systems management--Part 1: Object management function
信息技术 开放系统互连 系统管理 第2部分: 状态管理功能 Information technology--Open systems interconnection--Systems management--Part 2: State management function
信息技术 开放系统互连 系统管理 第3部分: 表示关系的属性 Information technology--Open systems interconnection--Systems management--Part 3; Attributes for representing relationships
信息技术 开放系统互连 系统管理 第4部分: 告警报告功能 Information technology--Open systems interconnection--Systems management--Part 4: Alarm reporting function
信息技术 开放系统互连 系统管理 第5部分: 事件报告管理功能 Information technology--Open systems interconnection--Systems management--Part 5: Event report management function
信息技术 开放系统互连 系统管理 第6部分: 日志控制功能 Information technology--Open systems interconnection--Systems management--Part 6: Log control function
信息技术 开放系统互连 系统管理 第7部分: 安全告警报告功能 Information technology--Open systems interconnection--Systems management--Part 7: Security alarm reporting function
信息技术 开放系统互连 系统管理 第8部分: 安全审计跟踪功能 Information technology--Open systems interconnection--Systems management--Part 8: Security audit trail function
计算机图形信息处理系统 程序员分层交互图形系统 第1部分: 功能描述 Information processing systems--Computer graphics--Programmer's Hierarchical Interactive Graphics system (PHIGS)--Part 1: Functional description
计算机图形信息处理系统 程序员分层交互图形系统 第2部分: 存档文件格式 Information processing systems--Computer graphics--Programmer's Hierarchical Interactive graphics System , (PHIGS)--Part 2: Archive file format
计算机图形信息处理系统 程序员分层交互图形系统 第3部分: 存档文件正文编码 Information processing systems--Computer graphics-Programmer's Hierarchical Interactive Graphics System--Part 3: Clear-text encoding of archive file
公用网之间以及公用网和提供数据传输业务的其他网之间互通的一般原则