知识与资讯
专业词汇
 
机械词汇表(2)
发布时间:2011-7-16 22:11:00||  点击:10961次||  文章分类:专业词汇||  发布人:翻译家(Fanyijia.com)


  手持式电动工具的安全 第二部分: 电动砂轮机、抛光机和盘式砂光机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requiements for electric grinders, polishers and disk-type sanders 
  手持式电动工具的安全 第二部分: 砂光机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sanders 
  手持式电动工具的安全 第二部分: 圆锯和圆刀的专用要求 Safety of hand-held motor-operated tools Part 2: Particular requirments for circular saws and circular knives 
  手持式电动工具的安全 第二部分: 电钻的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular reqiements for electric drills 
  手持式电动工具的安全 第二部分: 电锤的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric hammers 
  手持式电动工具的安全 第二部分: 电剪刀的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for sheet matal shears 
  手持式电动工具的安全 第二部分: 电动攻丝机的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric tappers 
  手持式电动工具的安全 第二部分: 电刨的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particlar requirements for electric planers 
  手持式电动工具的安全 第二部分: 电动往复锯 (曲线锯、刀锯) 的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for electric reciprocating saws (jig and sabre saws) 
  手持式电动工具的安全 第二部分: 混凝土振动器 (插入式振动器) 的专用要求 (可供认证用) Safety of hand-held motor-operated electric tools - Part 2: Particular requirements for concrete vibrators (internal vibrators) 
  手持式电动工具的安全 第二部分: 不易燃液体电喷枪的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for spray guns for non-flammable liquids 
  手持式电动工具的安全 第二部分: 电链锯的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for chain saws 
  手持式电动工具的安全 第二部分: 电动修枝剪与电动草剪的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for hedge trimmers and grass shears 
  手持式电动工具的安全 第二部分: 电动钉钉机的专用要求 Safety of hand-held motor operated electric tools--Part 2: Particular requirements for tackers 
  手持式电动工具的安全 第二部分: 电动木铣与电动修边机的专用要求 Safety of hand held motor operated electric tools--Part 2: Particular requirements for routers and immers 
  工作台不升降铣床精度 Milling machines with table of fixed height with horizontal or vertical spindle--Testing of the accuracy 
  升降台铣床精度 Milling machines with table of variable height with horizontal or vertical spindle--Testing of the accuracy 
  熔敷金属中扩散氢测定方法 Methods for determination of diffusible hydrogen in deposited metal 
  摇臂钻床 精度检验 Radial drilling machines--Testing of the accuracy 
  圆柱立式钻床 精度检验 第1部分: 几何精度检验 Pillar type vertical drilling machines--Testing of the accuracy--Part 1: Testing of the geometric accuracy 
  圆柱立式钻床 精度检验 第2部分: 工作精度检验 Pillar type vertical drilling machines--Testing of the accuracy--Part 2: Testing of the working accuracy 
  方柱立式钻床 精度检验 第1部分: 几何精度检验 Box type vertical drilling machines--Testing of the accuracy--Part 1: Geometrical tests 
  方柱立式钻床 精度检验 第2部分: 工作精度检验 Bot type vertical drilling machines--Testing of the accuracy--Part 2: Working tests 
  卧式车床精度检验 Acceptance conditions for general purpose parallel lathes--Testing of the accuracy 
  卧轴矩台平面磨床 精度 Surface grinding machines with horizontal grinding wheel spindle and reciprocating table--Testing of the accuracy 
  普通磨具 形状和尺寸 Shapes and dimensions for bonded abrasive products 
  塑料注射模具零件 推杆 Components of injection mould for plastics--Ejector pins 
  塑料注射模具零件 直导套 Components of injection mould for plastics--Straight guide bushes 
  塑料注射模具零件 带头导套 Components of injection mould for plastics--Guide bushes with head 
  塑料注射模具零件 带头导柱 Components of injection mould for plastics--Guide pillars with head 
  塑料注射模具零件 有肩导柱 Components of injection mould for plastics -- Guide pillars with shoulder 
  塑料注射模具零件 垫块 Components of injection mould for plastics -- Spacer blocks 
  塑料注射模具零件 推板 Components of injection mould for plastics--Ejector plates 
  塑料注射模具零件 模板 Components of injection mould for plastics--Mould plates 
  塑料注射模具零件 限位钉 Components of injection mould for plastics--Stop pins 
  塑料注射模具零件 支承柱 Components of injection mould for plastics--Support pillars 
  塑料注射模具零件 圆锥定位件 Components of injection mould for plastics--Locating elements 
  塑料注射模具零件技术条件 Components of injection mould for plastics--Specifica-tion 
  高速钢车刀条 High speed steel tool bits 
  锥柄长刃机用铰刀 Long fluted machine reamers with Morse taper shanks 
  带刃倾角直柄机用铰刀 Machine reamers with edge inclination with parallel shanks 
  机用铰刀技术条件 Machine reamers--Technical requirements 
  铰刀专用公差 Special tolerance for reamers 
  锥柄机用桥梁铰刀 Machine bridge reamers with Morse taper shanks 
  手用1:50锥度销子铰刀技术条件 Hand taper 1:50 reamers--Technical requirements 
  圆锥铰刀技术条件 Taper reamers--Technical requirements 
  硬质合金直柄机用铰刀 Machine reamers with parallel shanks with carbide tips 
  硬质合金锥柄机用铰刀 Machine reamers with Morse taper shanks with carbide tips 
  硬质合金铰刀技术条件 Reamers with carbide tips--Technical requirements 
  套式铰刀和套式扩孔钻用心轴 Arbors for shell reamers and shell core drills 
  直柄扩孔钻 Core drills with parallel shanks 
  扩孔钻技术条件 Core drills--Technical requirements 
  60°、90°、120°直柄锥面锪钻 Countersinks with parallel shanks for angles 60°90°and 120°inclusive 
  锥面锪钻技术条件 Countersinks--technical requirements 
  带导柱直柄平底锪钻 Counterbores with parallel shanks and solid pilots 
  带可换导柱锥柄平底锪钻 Counterbores with morse taper shanks and detachable pilots 
  平底锪钻技术条件 Counterbores--technical requirements 
  带导柱直柄90°锥面锪钻 90°Countersinks with parallel shanks and solid pilots 
  带可换导柱锥柄90°锥面锪钻 90°Countersinks with morse taper shanks and detachable pilots 
  90°锥面锪钻技术条件 90°Countersinks--technical requirements 
  锪钻用可换导柱 Detachable pilots for use with counterbores and countersinks 
  直柄回转工具用柄部直径和传动方头尺寸 Rotating tools with parallel shanks--Diameters of shanks and sizes of driving squares 
  三爪自定心卡盘 基本参数和尺寸 3-jaw self-centering chucks--Dimensions 
  呆扳手、梅花扳手、两用扳手的型式 Types of open-end wrenches, box wrenches and combination wrenches 
  螺钉与螺母的装配工具 双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸 Assembly tool for screws and nuts-Openend double-head engineers wrenches, doublehead box wrenches and combination wrenches-Maximum outside dimensions of heads 
  公制扳手开口和扳手孔的常用公差 Spanner gaps and sockets-Metric series-tolerances for general use 
  双头扳手的对边尺寸组配 Combinations of double-end wrenche gaps 
  敲击呆扳手和敲击梅花扳手 Slugging open-end wrenches and slugging box wrenches 
  呆扳手 - 梅花扳手、两用扳手 技术规范 Open-end wrenches, box wrenches and combination wrenches-Technical specifications 
  工业自动化仪表工作条件 振动 Industrial process measurement and control instrument operating conditions--Vibration 
  活扳手 Adjustable wrenches 
  电动工具噪声测量方法 工程法 Measurement of noise emitted by electric tools-Engineering method 
  螺钉和螺母的装配工具术语 Assembly tools for screws and nuts-nomenclature 
  焊接性试验 斜Y型坡口焊接裂纹试验方法 Weldability testing--Method of Y-groove cracking test 
  焊接性试验 搭接接头(CTS) 焊接裂纹试验方法 Weldability testing--Method of controlled thermal severity cracking test 
  焊接性试验 T型接头焊接裂纹试验方法 Weldability testing--Method of cracking test for welded tee joint 
  焊接性试验 压板对接(FISCO) 焊接裂纹试验方法 Weldability testing--Method of FISCO cracking test 
  焊接性试验 焊接热影响区最高硬度试验方法 Weldability testing--Testing method of maximum hard ness in weld heat-affected zone 
  普通磨料取样方法 Method for sampling of conventional abrasive grains 
  压铸模零件 模块 Die-cast die components--Mold plates 
  压铸模零件 圆形镶块 Die-cast die components--Round insert blocks 
  压铸模零件 矩形镶块 Die-cast die components--Rectangular insert blocks 
  压铸模零件 A型导柱 Die-cast die components--Guide pins type A 
  压铸模零件 B型导柱 Die-cast die components--Guide pins type B 
  压铸模零件 A型导套 Die-cast die components--Guide bushings type A 
  压铸模零件 B型导套 Die-cast die components--Guide bushings type B 
  压铸模零件 推板 Die-cast die components--Ejector plates 
  压铸模零件 推板导柱 Die-cast die components--Guide pins for ejector plate 
  压铸模零件 推板导套 Die-cast die components--Guide bushings for ejector plate 
  压铸模零件 推杆 Die-cast die components--Ejector pins 
  压铸模零件 复位杆 Die-cast die components--Return pins 
  压铸模零件 推板垫圈 Die-cast die components--Ejector plate washers 
  压铸模零件 限位钉 Die-cast die components--Stop pins 
  压铸模零件 垫块 Die-cast die components--Spacer blocks 
  压铸模零件技术条件 Specification of the die-cast die components 
  卧式内拉床 精度检验 Horizontal internal broaching machines--Testing of the accuracy 
  无心磨床 精度 External cylindrical centerless grinding machines--Testing of the accuracy 
  内圆磨床 精度 Internal cylindrical grinding machines with horizontal spindles--Testing of the accuracy 
  转塔车床精度 Turret lathes--Testing of the accuracy 
  外圆磨床 参数 External cylindrical grinding machines--Parameters 
  外圆磨床 精度 External cylindrical grinding machines--Accuracy 
  插齿机精度 Gear shaping machines--Testing of the accuracy 
  测量、控制和试验室用电气设备的安全要求 第1部分: 通用要求 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements 
  工业自动化仪表气源压力范围和质量 Pressure range and quality of air supply for the industrial process measurement and control instruments 
  金属覆盖层 覆盖层厚度测量 阳极溶解库仑法 Metallic coatings--Measurement of coating thickness--Coulometric method by anodic dissolution 
  磁性金属基体上非磁性覆盖层厚度测量 磁性方法 Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method 
  非磁性金属基体上非导电覆盖层厚度测量 涡流方法 Non-conductive coatings on non-magnetic metal substrates--Measurement of coating thickness--Eddy current method 
  压力机的安全装置技术要求 Technical requirememts for safety devices of the presses 
  压力机用感应式安全装置技术条件 Technical requirements for induction type safety device used for the presses 
  压力机用手持电磁吸盘技术条件 Technical requirements for hand-held electromagnetic disk used for the presses 
  渐开线花键拉刀技术条件 Broaches for involute spline technical specifications 
  渐开线花键滚刀通用技术条件 The general technical specifications for involute splines hobs 
  30°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 30°pressure angle involute splines 
  45°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 45°pressure angle involute splines 
  焊接和切割用软管接头 Hose connection for equipment for welding and cutting 
  碳钢焊条 Carbon steel covered electrodes 
  低合金钢焊条 Low alloy steel covered electrodes 
  金属焊接及钎焊方法在图样上的表示代号 Welding, brazing, braze welding and soldering of metals--List of processes for symbolic representation on drawings 
  螺纹紧固件电镀层 Electroplated coatings on threaded fasteners 
  车床刀架装刀槽高度 Machine tools--Lathe tool posts--Overall internal height 
  金属基体上的金属覆盖层 (电沉积层和化学沉积层) 附着强度试验方法 Metallic coatings on metallic substrates--Electrodepo-sited and chemically deposited coatings--Review of methods available for testing adhesion 
  龙门导轨磨床精度 Slideways grinding machines with two columns--Testing of the accuracy 
  卧式铣镗床检验条件 精度检验 第2部分: 台式机床 Test conditions for boring and milling machines with horizontal spindle--Testing of the accuracy Part 2: Table--type machines 
  电火花成形机 参数 第1部分: 单立柱机床(十字工作台型和固定工作台型) Die sinking electro-discharge machines(EDM)--Parameters Part 1: Single column machines(cross slide table type and fixed table type) 
  电火花成形机 精度检验 第1部分: 单立柱机床(十字工作台型和固定工作台型) Die sinking electro-discharge machines(EDM)--Testing of accuracy Part 1: Single column machines (cross slide table type and fixed table type) 
  埋弧焊用碳钢焊丝和焊剂 Carbon steel electrodes and fluxs for submerged arc welding 
  手工具包装、标志、运输与贮存 Packaging,marking,transportation and storage of hand tools 
  Ni-B-Si系自熔合金粉 Metallic powder material--Self-fluxing Ni-B-Si alloy powder 
  Ni-Cr-B-Si系自熔合金粉 Metallic powder material--Self-fluxing Ni-Cr-B-Si alloy powder 
  可转位立铣刀 Endmilling cutters with indexable inserts 
  可转位三面刃铣刀 Side and facemilling cutters with indexable inserts 
  可转位面铣刀 Facemilling cutters with indexable inserts 
  可转位车刀及刀夹型号表示规则 Turning toolholders and cartridges for indexable inserts--Designation 
  可转位车刀型式尺寸和技术条件 Turning tools with indexable inserts--Types,dimensions and technical specifications 
  内六角扳手 Hexagon socket screw keys 
  内六角花形扳手 Hexagon spline wrenches 
  内六角花形螺钉旋具 Hexagon spline screwdrivers 
  电钻 Electric drills 
  铸造术语 Foundry terminology 
  防锈材料百叶箱试验方法 Shed storage exposure test--Testing method for rust-proof material 
  凿岩机械与气动工具 性能试验方法 Test methods of performance for rock drilling machines and pneumatic tools 
  数据处理用的模块化仪器系统 CAMAC 系统 A modular instrumentation system for data handling--CAMAC system 
  CAMAC 术语的定义 Definitions of CAMAC terms 
  CAMAC 多机箱系统结构分支信息公路和A1型CAMAC 机箱控制器规范 CAMAC organization of multi-crate systems specification of the branch-highway and CAMAC crate controller type A1 
  CAMAC 系统中的块传送 Block transfers in CAMAC systems 
  摩擦材料洛氏硬度试验方法 Test method of Rockwell hardness for friction materials 
  锉刀通用技术条件 General technical condition of files 
  锉刀试验方法 Test methods of files 
  锉刀检验规则、标志与包装 Test regulations, marking and packaging of files 
  锉刀分类、编号规则 Classification and numbering regulations of files 
  机床 主轴端部与花盘 互换性尺寸 第1部分: A型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 1: Type A 
  机床 主轴端部与花盘 互换性尺寸 第2部分: 凸轮锁紧型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 2: Camlock type 
  机床 主轴端部与花盘 互换性尺寸 第3部分: 卡口型 Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 3: Bayonet type 
  四爪单动卡盘 型式、基本参数和尺寸 Types, basic parameters and dimensions of four-jaw independent chucks 
  四爪单动卡盘 精度 Testing of accuracy of four-jaw independent chucks 
  四爪单动卡盘 技术条件 Technical specifications of four-jaw independent chucks 
  工业闭式齿轮油 Gear oils for industrial enclosed gear drives 
  电热设备的安全 第一部分 通用要求 Safety in electroheat installations--Part 1: General requirements 
  电热设备的安全 第二部分 对电弧炉设备的特殊要求 Safety in electroheat installations-part 2 Particular requirements for arc furnace installations 
  电热设备的安全 第三部分 对感应和导电加热设备以及感应熔炼设备的特殊要求 Safety in electroheat installations--Part 3: Particular requirements for induction and conduction heating installations and induction melting installations 
  电热设备的安全 第四部分: 对电阻炉的通用要求 Safety in electroheat installations--Part 4: General requirements for resistance furnaces 
  电热设备的安全 第五部分 等离子设备的安全规程 Safety in electroheat installations - Part 5: Specifications for safety in plasma installations 
  电热设备的安全 第六部分 对工业微波加热设备的特殊要求 Safety in electroheat installations--Part 6: Particular requirements for industrial microwave heating installations 
  电热设备的安全 第七部分 对具有电子枪的电热设备的特殊要求 Safety in electroheat installations--part 7: Particular requirements for installations with electron guns 
  电热设备的安全 第八部分 对电渣重熔炉的特殊要求 Safety in electroheat installations--part 8: Particular requirements for electro-slag remelting furnaces 
  电热设备的安全 第九部分 对高频介质加热设备的特殊要求 Safety in electroheat installations?Part 9: Particular requirements for high-frequency dielectric heating installations 
  电热设备的安全 第11部分: 对液态金属电磁搅拌、输送或浇注设备的特殊要求 Safety in electroheat installations-Part 11: Particular requirements for installations for electromagnetic stirring,transport or pouring of metal liquids 
  表面粗糙度比较样块 铸造表面 Roughness comparison specimens--Cast surfaces 
  剪切机械安全规程 Safety regulations for shearing machinery 
  中心钻 第1部分: 不带护锥的中心钻-A型 型式和尺寸 Centre drills Part 1: Centre drills for centre holes without protecting chamfers-Type A Dimensions 
  中心钻 第2部分: 带护锥的中心钻-B型 型式和尺寸 Centre drills Part 2: Centre drills for centre holes with protecting chamfers--Type B Dimensions 
  中心钻 第3部分: 弧形中心钻-R型 型式和尺寸 Centre drills Part 3: Centre drills for centre holes with radius form--Type R Dimensions 
  中心钻 第4部分: 技术条件 Center drills Part 4: Technical specifications 
  机用锯条 第1部分: 型式与尺寸 Machine hacksaw blades Part 1: Dimensions 
  机用锯条 第2部分: 技术条件 Machine hacksaw blades Part 2: Technical specifications 
  直齿插齿刀 基本型式和尺寸 The basic types and dimensions for spur shaper cutters 
  直齿插齿刀 通用技术条件 The general technical specifications for spur shaper cutters 
  齿轮滚刀 基本型式和尺寸 The basic type and dimensions of gear hobs 
  齿轮滚刀 通用技术条件 The general technical specifications for gear hobs 
  扳手钻夹头 Key type drill chuck 
  钻夹头圆锥 Drill chuck tapers 
  硬质合金拉制模具 型式和尺寸 Hardmetal dies for drawing wires and bars--Types and dimensions 
  立铣刀 第1部分: 直柄立铣刀的型式和尺寸 End mills--Part 1: Milling cutters with parallel shanks 
  立铣刀 第2部分: 莫氏锥柄立铣刀的型式和尺寸 End mills--Part 2: Milling cutters with morse taper shanks 
  立铣刀 第3部分: 7/24锥柄立铣刀的型式和尺寸 End mills--Part 3: Milling cutters with 7/24 taper shanks 
  立铣刀 技术条件 End mills--Technical specifications 
  三面刃铣刀 型式和尺寸 Side and face milling cutter--Tapes and dimensions 
  三面刃铣刀 技术条件 Side and face milling cutter--Technical specifications 
  锯片铣刀 型式和尺寸 Metal slitting saws--Types and dimensions 
  锯片铣刀 技术条件 Metal slitting saws--Technical specifications 
  圆角铣刀 Corner-rounding cutters 
  T型槽铣刀 第1部分: 直柄T型槽铣刀的型式和尺寸 T-slot cutters--Part 1: Dimensions of T-slot cutters with plain or flated parallel shanks 
  T型槽铣刀 第2部分: 莫氏锥柄T型槽铣刀的型式和尺寸 T-slot cutters--Part 2: Dimensions of T-slot cutters with Morse taper shanks with tapped holes 
  T型槽铣刀 技术条件 T-slot cutters--Technical specifications 
  角度铣刀 第1部分: 单角铣刀的型式和尺寸 Angle milling cutter--Part 1: The types and dimensions for single angle cutters 
  角度铣刀 第2部分: 不对称双角铣刀的型式和尺寸 Angle milling cutter--Part 2: The types and dimensions for double unequal-angle cutters 
  角度铣刀 第3部分: 对称双角铣刀的型式和尺寸 Angle milling cutter--Part 3: The types and dimensions for double equal-angle cutters 
  角度铣刀 技术条件 Angle cutters--Technical specifications 
  镶片圆锯 Segmental circular metal cutting saws 
  铣刀直柄 第1部分: 普通直柄的型式和尺寸 Parallel shanks for milling cutters--Part 1: Dimensional characteristics of plain parallel shanks 
  铣刀直柄 第2部分: 削平直柄的型式和尺寸 Parallel shanks for milling cutters--Part 2: Dimensional characteristics of flatted parallel shanks 
  铣刀直柄 第3部分: 2°斜削平直柄的型式和尺寸 Parallel shanks for milling cutters--Part 3: Dimensional characteristics of parallel shanks with 2°angular flats 
  铣刀直柄 第4部分: 螺纹柄的型式和尺寸 Parallel shanks for milling cutters--Part 4: Dimensional characteristics of screwed shanks 
  铣刀和铣刀刀杆的互换尺寸 Interchang eability dimensions for milling cutters and arbors 
  削平型直柄刀具夹头 Tool chucks for flated parallel shank tools 
  直柄麻花钻 第1部分: 粗直柄小麻花钻的型式和尺寸 Parallel shank twist drills--Part 1: The types and dimensions for small type twist drills with oversize parallel shank 
  直柄麻花钻 第2部分: 直柄短麻花钻的型式和尺寸 Parallel shank twist drills--Part 2: The types and dimensions for parallel shank stub series twist drills 
  直柄麻花钻 第3部分: 直柄麻花钻的型式和尺寸 Parallel shank twist drills--Part 3: The types and dimesnions for parallel shank jobber series twist drills 
  直柄麻花钻 第4部分: 直柄长麻花钻的型式和尺寸 Parallel shank twist drills--Part 4: The types and dimensions for parallel shank long series twist drills 
  直柄麻花钻 第5部分: 直柄超长麻花钻的型式和尺寸 Parallel shank twist drills--Part 5: The types and dimensions for extra long parallel shank twist drills 
  攻丝前钻孔用阶梯麻花钻 第1部分: 直柄阶梯麻花钻的型式和尺寸 Subland twist drills for holes prior to tapping screw threads Part 1: The types and dimensions for subland twist drills with parallel shanks 
  攻丝前钻孔用阶梯麻花钻 第2部分: 莫氏锥柄阶梯麻花钻的型式和尺寸 Subland twist drills for holes prior to tapping screw threads Part 2: The types and dimensions for subland twist drills with Morse shanks 
  阶梯麻花钻 技术条件 Subland twist drills--Technical specifications 
  钎料型号表示方法 Filler metal for soft soldering and brazing--Designation 
  凿岩机械与气动工具名词术语 Terminology of rock drilling machines and pneumatic tools 
  夹扭钳和剪切钳 术语 Pliers and nippers--Nomenclature 
  夹扭钳和剪切钳 通用技术条件 Pliers and nippers--General technical requirements 
  夹扭钳和剪切钳 试验方法 Pliers and nippers--Methods of test 
  杠杆齿轮比较仪 Mechanical dial comparators 
  直柄燕尾槽铣刀和直柄反燕尾槽铣刀 Dovetail and inverse dovetail milling cutters with plain parallel shanks 
  削平型直柄燕尾槽铣刀和削平型直柄反燕尾槽铣刀 Dovetail and inverse dovetail milling cutters with flatted parallel shanks 
  直柄燕尾槽铣刀和直柄反燕尾槽铣刀技术条件 Dovetail and inrerse dovetail milling cutters with parallel shanks technical specificatians 
  球面半径 Radii of sphere surfaces 
  润滑槽 Lubricating grooves 
  滚花 Knurl 
  零件倒圆与倒角 Rounding and chamferd of parts 
  砂轮越程槽 Relief grooves for grinding wheels 
  人造金刚石和立方氮化硼 品种 Types of synthetic diamond and cubic boron nitride 
  超硬磨料 金刚石或立方氮化硼颗粒尺寸 Super abrasive--Grain sizes of diamond or cubic boron nitride 
  立方氮化硼技术条件 Technical requirements for cubic boron nitride 
  超硬磨具和锯 形状总览、标记 Superhard abrasive products and saws---General survey designation 
  超硬磨料制品 金刚石或立方氮化硼磨具 形状和尺寸 Abrasive products--Diamond or cubic boron nitride grinding tools--Form and dimensions 
  金钢石或立方氮化硼磨具 带柄油石 Diamond or cubic boron nitride--Hand sticks 
  金刚石或立方氮化硼磨具 标志和包装 Marking and packing for diamond or cubic boron nitride abrasive products 
  影响钢熔化焊接头质量的技术因素 Technical factors influencing the quality of the fusion welded joints in steel 
  金属熔化焊焊缝缺陷分类及说明 Classification of imperfections in metallic fusion welds, with explanations 
  铜基钎料 Copper base brazing filler metals 
  金属覆盖层 对底材为阴级的覆盖层 腐蚀试验后的电镀试样的评级 Metallic coatings--Coatings cathodic to the substrate--Rating of electro-plated test specimens subjected to corrosion tests 
  金属和氧化物覆盖层 横断面厚度显微镜测量方法 Metallic and oxide coatings--Measurement of coating thickness--Microscopical method 
  金属和其他无机覆盖层 厚度测量方法评述 Metallic and other non-organic coatings--Review of methods of measurement of thickness 
  金属及其覆盖层 大气腐蚀试验 现场试验的一般要求 Metals and its coatings--Atmospheric corrosion testing--General requirements for field tests 
  金属和其他无机覆盖层 腐蚀膏腐蚀试验 (CORR试验) Metallic and other non-organic coatings--Corrodkote corrosion test(CORR test) 
  电沉积铬层 电解腐蚀试验(EC试验) Electrodeposited chromium coatings--Electrolytic corrosion testing (EC test) 
  卧轴矩台平面磨床 参数 Surface grinding machines with horizontal spindle and rectangular table--Parameters 
  无心外圆磨床参数 External cylindrical centerless grinding machines--Parameters 
  内圆磨床参数 Internal cylindrical grinding machines--Parameters 
  立式内拉床 精度检验 Vertical internal broaching machines--Testing of the accuracy 
  立式外拉床 精度检验 Vertical surface broaching machines--Testing of the accuracy 
  导轨磨床参数 Surface grinding machines for grinding slideways--Parameters 
  立轴矩台平面磨床精度 Surface grinding machines with vertical grinding wheel spindle and reciprocating table--Testing of the accuracy 
  金属切削机床术语 基本术语 Terminology for metal-cutting machine tools--Basic terminology 
  金属切削机床术语 组合机床及组合机床自动线(2000年5月废止) Terminology for metal-cutting machine tools--Modular machine tools and transfer lines 
  金属切削机床术语 车床 Terminology for metal-cutting machine tools--Lathes 
  金属切削机床术语 钻床 Terminology for metal-cutting machine tools--Drilling machines 
  金属切削机床术语 镗床 Terminology for metal-cutting machine tools--Boring machines 
  金属切削机床术语 磨床 Terminology for metal-cutting machine tools--Grinding machines 
  金属切削机床术语 齿轮加工机床 Terminology for metal-cutting machine tools--Gear cutting machines 
  金属切削机床术语 螺纹加工机床 Terminology for metal-cutting machine tools--Threading machines 
  金属切削机床术语 铣床 Terminology for metal-cutting machine tools--Milling machines 
  金属切削机床术语 刨床和插床 Terminology for metal-cutting machine tools--Planing and slotting machines 
  金属切削机床术语 拉床 Terminology for metal-cutting machine tools--Broaching machines 
  金属切削机床术语 锯床 Terminology for metal-cutting machine tools--Sawing machines 
  金属切削机床术语 刻线机 Terminology for metal-cutting machine tools--Dividing machines 
  金属切削机床术语 管子加工机床 Terminology for metal-cutting machine tools--Pipe cutting machines 
  金属切削机床术语 机床附件 Terminology for metal-cutting machine tools--Machine tool accessory 
  直接电弧炉的试验方法 Test methods for direct arc furnaces 
  钢铁工件涂装前磷化处理技术条件 Specifications for phosphating treatment of iron and steel parts before painting 
  铝及铝合金阳极氧化着色阳极氧化膜耐晒度的人造光加速试验 Anodizing of aluminium and its alloys--Accelerated test of light fastness of coloured anodic oxide coatings using artificial light 
  人造金刚石微粉和立方氮化硼微粉 品种 Types of synthetic diamond micropowder and cubic boron nitride micropowder 
  T型角焊接头弯曲试验方法 Method of bend test for T type fillet welded joint 
  铸造用硅砂化学分析方法 Methods for chemical analysis of silica sand for foundry 
  电烙铁 Electric soldering irons 
  双端面磨床参数 Double disc surface grinding machines?Parameters 
  金属热处理工艺术语 Terminology of metal heat treatment 
  埋弧炉试验方法 Test methods for submerged-arc furnaces 
  具有电子枪的电热设备试验方法 Test methods for electroheating installations with electron guns 
  搪瓷名词术语 Terms of vitreous and porcelain enamels 
  角向磨光机 Electric angle grinders 
  电锤 Electric rotary hammers 
  多个控制器在-CAMAC机箱中 Multiple controllers in a CAMAC crate 
  CAMAC串行信息公路接口系统 CAMAC-Serial highway interface systems 
  CAMAC子程序 Subroutines for CAMAC 
  立轴矩台平面磨床 参数 Surface grinding machines with vertical grinding wheel spindle and reciprocating table--Parameters 
  光学曲线磨床 参数 Optical projection profile grinding machines--Parameters 
  电火花线切割机参数 Parameters of wire cut electric discharge machines 
  电火花线切割机精度 Accuracy of wire cut electric discharge machines 
  搪玻璃层耐温差急变性试验方法 Test methods for thermal shock resistance of glass-lined layer 
  搪玻璃釉耐热氢氧化钠溶液腐蚀性能的测定 Determination of resistance to hot sodium hydroxide of vitreous enamel 
  搪玻璃釉耐沸腾盐酸腐蚀性能的测定 Determination of resistance to boiling hydrochloric acid of vitreous enamel 
  搪玻璃层耐机械冲击试验方法 Impact test method of glass-lined layer 
  搪玻璃层的厚度测量 电磁法 Method for measuring the thicknees of glass-lined layer by electromagnetic meter 
  用在腐蚀条件下的搪玻璃设备的高电压试验方法 Test method of glass-lined equipment for service under corrosive conditions by high voltage 
  搪玻璃设备水压试验方法 Hydraulic pressure test of glass-lined equipments 
  搪玻璃设备气密性试验方法 Air seal test method of glass-lined equipments 
  搪玻璃容器公称容积与公称直径 Nominal volume and nominal diameter for glass-lined vessel 
  铸造锡铅焊料 Casting tin-lead solders 
  铝及铝合金阳极氧化 阳极氧化膜的总规范 Anodizing of aluminium and aluminium alloys--General specifications for anodic oxidation coatings 
  铝及铝合金阳极氧化 阳极氧化膜厚度的定义和有关测量厚度的规定 Anodizing of aluminium and aluminium alloys--Definitions thickness of anodic oxidation coatings and conventions concerning the measurement of thickness 
  铝及铝合金阳极氧化膜厚度的试验方法 重量法 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Gravimetric method 
  铝及铝合金阳极氧化膜厚度的试验方法 分光束显微法 Test methods for thickness of anodic oxidation coatin-gs on aluminium and aluminium alloys--Split-beam mic-roscope method 
  滚齿机 精度检验 Acceptance conditions for gear hobbing machines--Testing of the accuracy 
  气体保护电弧焊用碳钢、低合金钢焊丝 Welding wires for gas shielding arc welding of carbon and low alloy steels 
  电弧焊机通用技术条件 The general specification for arc welding machines 
  热处理工艺材料名词术语 The terminology of technological materials for heat treatment 
  工业自动化系统 机床数值控制 词汇 Industrial automation systems--Numerical control of machines--Vocabulary 
  铑电镀液 The rhodium eletroplating solution 
  电阻焊设备的额定值与运行条件 Rating of resistance welding equipment 
  斧的通用技术条件 Axes--General technical requirements 
  焊条用还原钛铁矿粉中亚铁量的测定 Determination of ferrous iron content in reduced ilmenite powder for welding rod 
  锻压术语 Terminolgy of forging and stamping 
  钎缝强度试验方法 Method of the strength test for brazed and soldered seam 
  金属管状远红外辐射加热器 Metal tube far infraed heater 
  铝及铝合金阳极氧化 薄阳极氧化膜连续性的检验 硫酸铜试验 Anodizing of aluminium and aluminium alloys--Check of continuity of thin anodic oxide coatings--Copper sulphate test 
  铝及铝合金阳极氧化 阳极氧化膜封闭后吸附能力的损失评定 酸处理后的染色斑点试验 Anodizing of aluminium and aluminium alloys--Estimation of loss of absorptive power of anodic oxide coatings after sealing--Dye spot test with prior acid treatment 
  铝及铝合金阳极氧化 应用击穿电位测定法检验绝缘性 Anodizing of aluminium and aluminium alloys--Insulation check by measurement of breakdown potential 
  压铸模技术条件 Specification of the die-casting dies 
  冲模术语 Terminology for dies 
  塑料成型模具术语 Terminology of mould for plastics 
  压力铸造模具术语 Terminology for die-casting die 
  机床数字控制 点位、直线运动和轮廓控制系统的数据格式 Numerical control of machines--Data format for positioning ,line motion and contouring control systems 
  涂装前钢材表面锈蚀等级和除锈等级 Rust grades and preparation grades of steel surfaces before application of paints and related products 
  精密插齿机精度 Precision gear shaping machines?Testing of the accuracy 
  金属切削机床通用技术条件 General specifications for metal-cutting machine tools 
  硬质合金错齿三面刃铣刀 Side and face milling cutters with double alternate helical teeth with carbide tips 
  电动工具型号编制方法 Types organization method for electric tools 
  开式压力机 精度 Open front mechanical power presses?Testing of the accuracy 
  四柱液压机 精度 Four-column hydraulic presses - Testing of the accuracy 
  花键轴铣床 精度 Splint hobbing machines - Testing of the accuracy 
  固定顶尖 参数 Dead centre - Parameter 
  固定顶尖 精度 Dead centre - Testing of the accuracy 
  固定顶尖 技术条件 Dead centre - Specification 
  镶片齿轮滚刀 Insterted blaeds gear hobs 
  硬质合金圆柱形旋转锉 Cylindrical hardmetal burrs 
  硬质合金圆柱形球头旋转锉 Cylindrical round-(ball-) nose hardmetal burrs 
  硬质合金圆球形旋转锉 Spherical hardmetal hurrs 
  硬质合金椭圆形旋转锉 Oval hardmetal burrs 
  硬质合金弧形圆头旋转锉 Arch round-(ball-) nose hardmetal burrs 
  硬质合金弧形尖头旋转锉 Arch pointed-nose hardmetal burrs 
  硬质合金火炬形旋转锉 Flame hardmetal burrs 
  硬质合金60°和90°圆锥形旋转锉 60°and 90°cone hardmetal burrs 
  硬质合金锥形圆头旋转锉 Conical round-(ball-) nose hardmetal burrs 
  硬质合金锥形尖头旋转锉 Conical pointed-nose hardmetal burrs 
  硬质合金倒锥形旋转锉 Inverted cone hardmetal burrs 
  硬质合金旋转锉技术条件 Hardmetal burrs technical specifications 
  工业过程测量和控制系统用自动平衡式记录仪和指示仪 Self-balance recorders and indicators for use in industrial-process measurement and control systems 
  涂附磨具用磨料 粒度分析 第1部分: 粒度组成 Coated abrasives--Grain size analysis--Part 1: Grain size distribution test 
  涂附磨具用磨料 粒度分析 第2部分: 粗磨粒P12?P220粒度组成的测定 Coated abrasives--Grain size analysis--Part 2: Determination of grain size distribution of macrogrits P12 to P220 
  涂附磨具用磨料 粒度分析 第3部分: 微粉P240 - P2500粒度组成的测定 Coated abrasives--Grain size analysis--Part 3: Determination of grain size distribution of microgrits P240 to P2500 
  用于工业过程控制 实时FORTRAN Industrial real-time FORTRAN--Application for the control of industrial processes 
  信息处理 数据存储设备用磁盘盘片 外径 200mm、内径63.5mm、每道96000 次磁道翻转 Information processing--Magnetic disk for data storage devices-96000 flux transitions per track,200mm outer diameter, 63.5mm inner diameter 
  信息处理 数据存储设备用磁盘盘片 外径 210mm、内径 100mm、每道158000次磁道翻转 Information processing--Magnetic disk for data storage devices-158000 flux transitions per track, 210mm outer diameter, 100mm inner diameter 
  信息处理 数据交换用130mm 改进调频制记录的位密度为7958磁道翻转/ 弧度、道密度为1.9道/毫米的双面软磁盘 第一部分 尺寸、物理性能和磁性能 Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1.9tpmm, on both sides--Part 1: Dimensional, physical and magnetic characteristics 
  信息处理 数据交换用 130mm改进调频制记录的位密度为7958磁道翻转/ 弧度、道密度为1.9道/毫米的双面软磁盘 第二部分 磁道格式A Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1.9tpmm, on both sides--Part 2: Track format A 
  信息处理 数据交换用 130mm改进调频制记录的位密度为7958磁道翻转 /弧度、道密度为1.9道/毫米的双面软磁盘 第三部分 磁道格式B Information processing--Data interchange on 130mm flexible disk cartridges using modified frequency modulation recording at 7958 ftprad, 1.9tpmm, on both sides--Part 3: Track format B 
  铸造用硅砂 Foundry silica sand 
  焊接用插销冷裂纹试验方法 Welding--Cold cracking test method using implants 
  焊接接头疲劳裂纹扩展速率试验方法 Test method for fatigue crack growth rates of welded joints 
  焊接与切割安全 Safety in welding and cutting 
  钢件渗碳淬火有效硬化层深度的测定和校核 Determination and verification of the effective depth of carburizod and hardened cases of steel parts 
  钢件薄表面总硬化层深度或有效硬化层深度的测定 Determination of total or effective thickness of thin surface hardened layers of steel parts 
  热处理炉有效加热区测定方法 Testing method for working zone of heat treating furnace 
  锻模及其零件术语 Terminology of forging dies and elements 
  铜及铜合金焊丝 Welding wire and rods of copper and copper alloys 
  摇臂钻床参数 Radial drilling machines--Parameters 
  分散型过程控制系统用工业过程数据公路 总论 Process data highway, type C (PROWAY C), for distributed process control systems--Overview 
  分散型过程控制系统用工业过程数据公路 功能要求 Process data highway, type C (PROWAY C), for distributed process control systems--Functional requirements 
  分散型过程控制系统用工业过程数据公路 与工业过程数据公路的接口 Process data highway, type C (PROWAY C), for distributed process control systems--The interface to PROWAY 
  分散型过程控制系统用工业过程数据公路 工业过程数据公路链路控制 (PLC) 子层 Process data highway, type C (PROWAY C), for distributed process control systems--The PROWAY link control (PLC)sublayer 
  分散型过程控制系统用工业过程数据公路 PLC-MAC 接口和服务规范 Process data highway, type C (PROWAY C), for distributed process control systems--PLC-MAC interface and service specification 
  分散型过程控制系统用工业过程数据公路 媒体送取控制 (MAC)子层 Process data highway, type C (PROWAY C), for distributed process control systems--The medium access control (MAC) sublayer 
  分散型过程控制系统用工业过程数据公路 MAC-物理层接口和规范 Process data highway, type C (PROWAY C), for distributed process control systems--MAC-Physical layer interface specification 
  分散型过程控制系统用工业过程数据公路 单信道相位连续 FSK物理 (PHY)层及其与媒体接口的规范 Process data highway, type C (PROWAY C), for distributed process control systems--Specification of the single channel phase-continuous-FKS physical (PHY) layer and its interface to the medium 
  分散型过程控制系统用工业过程数据公路 单信道同轴电缆总线媒体“层”技术规范 Process data highway, type C (PROWAY C), for distributed process control systems--Single-channel coaxial-cable bus medium"layer"specification 
  分散型过程控制系统用工业过程数据公路 工业过程数据公路管理 Process data highway, type C (PROWAY C), for distributed process control systems--PROWAY management 
  金属和其他非有机覆盖层 通常凝露条件下的二氧化硫腐蚀试验 Metallic and other non-organic coatings--Sulfur dioxide test with general condensation of moisture 
  金属覆盖层及其他有关覆盖层 维氏和努氏显微硬度试验 Metallic and related coatings--Vickers and Knoop microhardness tests 
  锌和镉上铬酸盐转化膜试验方法 Chromate conversion coatings on zinc and cadmium--Test methods 
  金属材料上的转化膜 单位面积上膜层质量的测定 重量法 Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods 
  金属和其他无机覆盖层 热喷涂 锌、铝及其合金 Metallic and other inorganic coatings--Thermal spraying--Zinc、aluminium and their alloys 
  金属覆盖层 镍+铬和铜+镍+铬电沉积层 Metallic coatings--Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium 
  金属覆盖层 镍电沉积层 Metallic coatings--Electrodeposited coatings of nickel 
  金属覆盖层 钢铁上的锌电镀层 Metallic coatings--Electroplated coatings of zinc on iron or steel 
  电镀锌和电镀镉层的铬酸盐转化膜 Chromate conversion coatings on electroplated zinc and cadmium coatings 
  搪瓷耐碱性能测试方法 Test method for alkali resistance of porcelain enamels 
  搪瓷耐室温柠檬酸性能测试方法 Vitreous and porcelain enamels--Determination of resistance to citric acid at room temperature 
  铸铁焊条及焊丝 Covered electrodes and welding rods for welding cast iron 
  碳钢药芯焊丝 Carbon steel flux cored electrodes for arc welding 
  银钎料 Silver filler metals for brazing 
  电热设备的试验方法 间接电阻炉 Test methods for electroheat installations - Indirect resistance furnaces 
  电热设备基本技术条件 通用部分 Basic specifications for electroheat installations--General 
  电热设备基本技术条件 炼钢电弧炉 Basic specifications for electroheat installations--Steelmaking arc furnaces 
  电热设备基本技术条件 感应电热设备 Basic specifications for electroheat installations--Induction electroheat installations 
  电热设备基本技术条件 间接电阻炉 Basic specifications for electroheat installations--Indirect resistance furnaces 
  电热设备基本技术条件 高频介质加热设备 Basic specifications for electroheat installations--high frequency dielectric heating installations 
  人造气氛腐蚀试验 盐雾试验 Corrosion tests in artificial atmospheres--Salt spray tests 
  滚齿机 参数 Gear hobbing machines--Parameters 
  弧焊变压器防触电装置 Arc welding transformer hazard reducing device 
  电焊机型号编制方法 The organization of model for electric welding machinees 
  锡铅焊料化学分析方法 碘酸钾滴定法测定锡量 Tin-lead solders - Determination of tin content - Potassium iodate titrimetric method 
  锡铅焊料化学分析方法 孔雀绿分光光度法测定锑量 Tin-lead solders - Determination of antimony content - Malachite green spectrophotometric method 
  锡铅焊料化学分析方法 溴酸钾滴定法测定锑量 Tin-lead solders - Determination of antimony content - Potassium bromate titrimetric method 
  锡铅焊料化学分析方法 硫脲分光光度法测定铋量 Tin-lead solders - Determination of bismuth content - Thiourea spectrophotometric method 
  锡铅焊料化学分析方法 1,10 -二氮杂菲分光光度法测定铁量 Tin-lead solders - Determination of iron content - 1,10-phenanthroline spectrophotometric method 
  锡铅焊料化学分析方法 砷锑钼蓝分光光度法测定砷量 Tin-lead solders - Determination of arsenic content - Molybdoantimony-arsenate blue spectrophotometric method 
  锡铅焊料化学分析方法 2,9-二甲基-1,10-二氮杂菲分光光度法测定铜量 Tin-lead solders - Determination of copper content - 2,9-dimethyl-1,10-phenanthroline spectrophotometric method 
  锡铅焊料化学分析方法 火焰原子吸收光谱法测定银量 Tin-lead solders - Detemination of silver content - Flame atomic absorption spectrophotometric method 
  锡铅焊料化学分析方法 电位滴定法测定银量 Tin-lead solders - Determination of silver content - Potentiometric titrimetric method 
  锡铅焊料化学分析方法 火焰原子吸收光谱法测定锌量 Tin-lead solders - Determination of zinc content - Flame atomic absorption spectrophotometric method 
  锡铅焊料化学分析方法 铬天青S-聚乙二醇辛基苯基醚分光光度法测定铝量 Tin-lead solders - Determination of aluminum content - Chrome azurol S-polyethylene glycol oetyl phenyl ether spectrophotometric method 
  锡铅焊料化学分析方法 催化示波极谱法测定镉量 Tin-lead solders - Determination of cadmium content - Catalytic oscillopolarographic method 
  锡铅焊料化学分析方法 磷钒钼杂多酸 -结晶紫分光光度法测定磷量 Tin-lead solders - Determination of phosphorus content - Phosphor-vanadium-molybdium poly acid-crystal violet spectrophotometric method 
  锡铅焊料化学分析方法 蒸馏示波极谱法测定硫量 Tin-lead solders?Determination of sulphur content - Oscillopolarographic method after distillation 
  螺钉旋具通用技术条件 Screwdrivers - General technical requirements 
  螺钉旋具试验方法 Screwdrivers - Test methods 
  铜合金工具防爆性能试验方法 Testing method of copper alloy tools for explosive atmospheres 
  铝及铝合金焊丝 Aluminium and aluminium alloy welding rods and wires 
  镍基钎料 Nickel base brazing filler metals 
  锻压机械 精度检验通则 Acceptance code of accuracy for metalforming machine 
  闭式单点压力机 精度 Straight sided one-point mechanical presses - Testing of the accuracy 
  立轴圆台平面磨床 参数 Surface grinding machines with vertical grinding wheel spindle and round table - Parameters 
  铲齿车床精度 Relieving lathes - Testing of the accuracy 
  花键轴磨床 参数 Spline shaft grinding machines - Parameters 
  闭式双点压力机 精度 Straight sided two-point mechanical presses - Testing of the accuracy 
  自动换刀机床用7:24圆锥工具柄部40、45和50号圆锥柄 Tool shanks with 7:24 taper for automatic tool changers - Shanks Nos. 40, 45 and 50 
  自动换刀机床用7:24圆锥工具柄部40、45和50号圆锥柄用拉钉 Tool shanks with 7:24 taper for automatic tool changers - Retention knobs for shanks Nos. 40, 45 and 50 
  硬质合金锥柄麻花钻 Taper shank twist drills with carbide tips 
  硬质合金麻花钻通用技术条件 General technical specifications for twist drill with carbide tips 
  硬质合金直柄T形槽铣刀 Parallel shank T-slot cutters with carbide tips 
  硬质合金锥柄T形槽铣刀 Taper shank T-slot cutters with carbide tips 
  矩形花键滚刀 Hobs for parallel side splines 
  机夹切断车刀 Cutting-off tools for turning with clamp tips 
  机夹外螺纹车刀 Turning tools for external threads with clamp tips 
  机夹内螺纹车刀 Turning tools for internal threads with clamp tips 
  DDZ-Ⅲ系列电动单元组合仪表 计算器 DDZ-Ⅲ series process electronic control system - Computing unit 
  DDZ-Ⅲ系列电动单元组合仪表 调节器 DDZ-Ⅲ series process electronic control system - Controller 
  DDZ-Ⅲ系列电动单元组合仪表 配电器 DDZ-Ⅲ series process electronic control system - Distributor 
  铝及铝合金阳极氧化 术语 Anodizing of aluminium and aluminium alloys - Terms 
  铝及铝合金阳极氧化 阳极氧化膜的封孔质量的测定方法 导纳法 Anodizing of aluminium and its alloys - Determination of quality of sealed anodic oxide coatings - Admittance method 
  复合金属覆层厚度的测定 金相法 Method for measuring thickness of coated layer on composite metal - The metallographic method 
  复合金属覆层厚度的测定 X荧光法 Method for measuring thickness of coated layer on composite metal - The X-ray fluorescent method 
  复合金属覆镍层厚度的测定 容量法 Method for measuring thickness of nickel-coated layer on composite metal - The volumetry 
  复合金属覆铝层厚度的测定 重量法 Method for measuring thickness of aluminium-coated layer on composite metal - The gravimetric method 
  金刚石圆锯片 Diamond circular saw blades 
  工业机器人 安全规范 Industrial robots--Safety specification 
  数字控制机床的数控处理程序 输出2000型记录辅元素 (后置处理命令) Numerical control of machines-NC processor output - Minor elements of 2000-type records (post-processor commands) 
  钢焊缝手工超声波探伤方法和探伤结果分级 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds 
  机械导纳的试验确定 基本定义与传感器 Experimental determination of mechanical mobility - Basic definitions and transducers 
  机械导纳的试验确定 用激振器作单点激励测量 Experimental determination of mechanical mobility - Measurments using single-point translation excitation with and attached vibration exciter 
  机械导纳的试验确定 冲击激励法 Experimental determination of mechanical mobility--Measurements using impact excitation 
  钎焊接头强度试验方法 Methods of the strength tests for brazed and soldered joint 
  钎料铺展性及填缝性试验方法 Test method of spreadability and clearance filling ability for filler metal 
  热喷涂金属件表面预处理通则 The general principle of surface preparation of metallic substrate for thermal spraying 
  热喷涂涂层厚度的无损测量方法 Thermal spraying coating Nondestructive methods for measurement of thickness 
  金属和其他无机覆盖层 热喷涂 操作安全 Metallic and other inorganic coatings--Thermal spraying--Safe practices 
  金属的磷酸盐转化膜 Phosphate conversion coatings for metals 
  金属和其他无机覆盖层储存条件下腐蚀试验的一般规则 Metallic and other non-organic coatings-General rules for corrosion tests applicable for storage conditions 
  金属覆盖层厚度 轮廓尺寸测量方法 Metallic coatings-Measurement of coating thickness--Profilometric method 
  金属覆盖层 工程用铬电镀层 Metallic coatings - Electroplated coatings of chromium for engineering purposes 
  搪瓷耐热性测试方法 Determination of resistance to heat of vitreous and porcelain enamels 
  搪瓷耐温急变性测试方法 Determination of resistance to thermal shock of vitreous and porcelain enamels 
  搪瓷光泽测试方法 Measurement of specular gloss of vitreous and porcelain enamels 
  模锻锤和大型机械锻压机用模块技术条件 Large die-blocks used for die-forging hammer and mechanical forging press--Specification 
  数子控制机床的数控处理程序输出 逻辑结构 Numerical control of machines - NC processor output - Logical structure 
  机器 轴高 Machines - Shaft heights 
  金属覆盖层 金和金合金电镀层的试验方法 第六部分:残留盐的测定 Metallic coating--Test methods for electrodeposited gold and gold alloy coatings-Part 6: Determination of the presence of residual salts 
  金属覆盖层 银和银合金电镀层的试验方法 第三部分:残留盐的测定 Metallic coatings--Test methods for electrodeposited silver and silver alloy coatings--Part 3: Determination of the presence of residual salts 
  金属覆盖层 工程用铜电镀层 Metallic coatings - Electroplated coatings of copper for engineering purposes 
  金属覆盖层 工程用镍电镀层 Metallic coatings - Electroplated coatings of nickel for engineering purposes 
  金属和其他非有机覆盖层--关于厚度测量的定义和一般规则 Metallic and other inorganic coatings--Definitions and conventions concerning the measurement of thickness 
  金属覆盖层 对底材呈阳极性的覆盖层腐蚀试验后的试样评级 Metallic coatings - Coatings anodic to the substrate - Rating of test specimens subjected to corrosion tests 
  焊接质量要求 金属材料的熔化焊 第一部分: 选择及使用指南 Quality requirements for welding--Fusion welding of metallic materials--Part 1: Guidelines for selection and use 
  焊接质量要求 金属材料的熔化焊 第二部分: 完整质量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 2: Comprehensive quality requirements 
  焊接质量要求 金属材料的熔化焊 第三部分: 一般质量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 3: Standards quality requirements 
  焊接质量要求 金属材料的熔化焊 第四部分: 基本质量要求 Quality requirements for welding--Fusion welding of metallic materials--Part 4: Elementary quality requirements 
  焊接质量保证 钢熔化焊接头的要求和缺陷分级 Quality assurance of welding?Requirement for fusion welding joint of steel and classification for imperfection 
  低合金钢埋弧焊用焊剂 Fluxes for the submerged arc welding of low alloy steel 
  塑料注射模技术条件 Specification of injection mould for plastics 
  塑料注射模大型模架 标准模架 Injection mould for plastic large-size mould bases - Standard mould bases 
  塑料注射模大型模架 技术条件 Injection mould for plastic large-size mould bases - Specification 
  塑料注射模大型模架 座板 Injection mould for plastic large-size mould bases - Elamping plates 
  塑料注射模大型模架 模板 Injection mould for plastic large-size mould bases - Mould plates 
  塑料注射模大型模架 支承板 Injection mould for plastic large-size mould bases - Support plates 
  塑料注射模大型模架 推板 Injection mould for plastic large-size mould bases - Ejector plates 
  塑料注射模大型模架 垫块 Injection mould for plastic large-size mould bases - Spacer plates 
  塑料注射模大型模架 带头导柱 Injection mould for plastic large-size mould bases - Guide pillars with head 
  塑料注射模大型模架 有肩导柱 Injection mould for plastic large-size mould bases - Guide pillars with shoulder 
  塑料注射模大型模架 推板导柱 Injection mould for plastic large-size mould bases - Guide pins for ejector plater 
  塑料注射模大型模架 直导套 Injection mould for plastic large-size mould bases - Straight guide bushes 
  塑料注射模大型模架 推板导套 Injection mould for plastic large-size mould bases - Guide bushes with head 
  塑料注射模大型模架 复位杆 Injection mould for plastic large-size mould bases - Return pins 
  塑料注射模大型模架 衬套 Injection mould for plastic large-size mould bases - Iiner bushes 
  塑料注射模中小型模架 Injection mould for plastic--Medium size and small size mould bases 
  塑料注射模中小型模架技术条件 Injection mould for plastic - Specifications for medium size and small size mould bases 
  金属覆盖层 锡电镀层 Metallic coatings - Electroplated coatings of tin 
  金属覆盖层 塑料上铜+镍+铬电镀层 Metallic coatings - Electroplated coatings of copper plus nickel plus chromium on plastics materials 
  金属热处理工艺分类及代号 Classification and designation on metal heat treatment 
  钢管环缝熔化焊对接接头射线透照工艺和质量分级 Methods of radiographic inspection and quality classification of circumferential fusion welded butt joints in steel pipes and tubes 
  热喷涂涂层设计命名方法 Designation for the design of thermal spraying coatings 
  热喷涂涂层材料命名方法 Designation of the materials for thermal spraying coatings 
  电沉积金属覆盖层和有关精饰计数抽样检查程序 Electrodeposited metallic coatings and related finishes - Sampling procedures for inspection by attributes 
  塑料上电镀层 热循环试验 Electroplated coatings on plastics materials - Thermal cycling test 
  金属零(部)件镀覆前质量控制技术要求 Technical requirements of quality control for metal parts to be coated 
  多功能钢铁表面处理液通用技术条件 General specification for multifunctional solution of steel and iron surface treatment 
  工业机器人 性能规范及其试验方法 Industrial robots--Performance criteria and related test methods 
  工业机器人 词汇 Industrial robots--Vocabulary 
  工业机器人 特性表示 Industrial robots--Presentation of characteristics 
  数字控制机床的数控处理程序输入 基本零件源程序参考语言 Numerical control of machines - NC processor input - Basic part program reference language 
  铝及铝合金阳极氧化 用喷磨试验仪测定阳极氧化膜的平均耐磨性 Anodizing of aluminium and aluminium alloys - Measurement of mean specific adrasion resistance of anodic oxidation coatings with an adrasive jet test apparatus 
  铝及铝合金阳极氧化 用轮式磨损试验仪测定阳极氧化膜的耐磨性和磨损系数 Anodizing of aluminium and aluminium alloys - Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus 
  铝及铝合金阳极氧化 氧化膜的铜加速醋酸盐雾试验 (CASS试验) Anodizing of aluminium and aluminium alloys - Copper accelerated acetic acid salt spray test for anodic oxide coatings (CASS test) 
  铝及铝合金阳极氧化 着色阳极氧化膜耐紫外光性能的测定 Anodizing of aluminium and aluminium alloys - Determination of the fastness to ultraviolet light of coloured anodic oxide coatings 
  铝及铝合金阳极氧化 用变形法评定阳极氧化膜的抗破裂性 Anodizing of aluminium and aluminium alloys - Assessment of resistance of anodic oxide coatings to cracking by deformation 
  埋弧焊机 Submerged arc welding machine 
  电弧焊机噪声测定方法 Determination for noise emitted by arc welding machines 
  金属热喷涂层剪切强度的测定 Thermal sprayed metallic coatings - Determination of shear strength 
  工业过程测量和控制用检测仪表和显示仪表精确度等级 Accuracy class of measuring instruments and display instruments for industrial process measurement and control 
  涂层硬质合金分类和涂层主要技术要求 Classification of coated hardmetal and main technical specifications for coating 
  锅炉受压元件焊接接头机械性能试验方法 Boiler pressure parts - Mechanical test for welded joints 
  钢铁件涂装前除油程度检验方法 (验油试纸法) The standard method of identification of degreaasing degree on the steel surfaces before covering organic coatings (Test paper method) 
  金属覆盖层 低氢脆镉钛电镀层 Metal coating - Cd-Ti plating of low hydrogan embrittlement 
  热处理设备术语 Terminology of heat treatment installation 
  金属覆盖层 钢铁上的镉电镀层 Metallic coatings?Electroplated coatings of cadmium on iron and steel
  工业控制用软件评定准则 Criteria for the evaluation of software used for industry control 
  对接焊接头宽板拉伸试验方法 Method of wide plate tension test for butt welded joint 
  钢锤通用技术条件 Steel hammers - General technical requirements 
  接触食物搪瓷制品 Enamelled ware in contact with food 
  接触食物搪瓷制品铅、镉析出量测试方法 Standard test method for lead and cadmium released from enamelled ware in contact with food 
  电热用等离子设备试验方法 Test methods of plasma installations for electroheat applications 
  金属切削机床 静刚度检验通则 Metal-cutting machine tools - Test code for static rigidity 
  工业过程测量和控制系统用模拟输入数字式指示仪 Digital indicators with analogue input for use in industrial-process measurement and control systems 
  锰基钎料 Manganese base brazing filler metals 
  磁性和非磁性基体上镍电镀层厚度的测量 The measurement of coating thickness for electrodeposited nickel coatings on magnetic and non-magnetic substracts 
  镍及镍合金焊条 Nickel and nickel alloy covered welding electrodes 
  铝基钎料 Aluminium base brazing filler metals 
  焊接接头脉动拉伸疲劳试验方法 Test method for pulsed tensile fatigue of welded joints 
  对接接头刚性拘束焊接裂纹试验方法 Method of rigid restraint cracking test for welding butt joint 
  金属覆盖层 黑色金属材料热镀锌层的质量测定 称量法 Metallic coatings--Determination of the mass for hot dip galvanized coatings on ferrous materials--Gravimetric method 
  湿式(非金属类)摩擦材料 Wet type (non-metallic)friction materials 
  金属镀覆和化学处理表示方法 Expression methods for metallic coating and chemical treatment 
  金属覆盖层 钢铁制品热镀锌层 技术要求 Metallic coatings--Hot dip galvanized coatings on fabricated ferrous products--Specification 
  自催化镍-磷镀层 技术要求和试验方法 Autocatalytic nickel-phosphorus coating--Specification and test methods 
  电动工具控制仪的安全 Safety of controllers for electric tools 
  可移式电动工具的安全 第一部分: 一般要求 Safety of transportable motor-operated electric tools--Part 1: General requirements 
  可移式电动工具的安全 圆锯的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for circular saws 
  可移式电动工具的安全 摇臂锯的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for radial arm saws 
  可移式电动工具的安全 平刨和厚度刨的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for planers and thicknessers 
  可移式电动工具的安全 台式砂轮机的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for bench grinders 
  可移式电动工具的安全 带锯的专用要求 Safety of transportable motor-operated electric tools--Particular requirements for band saws 
  可移式电动工具的安全 第二部分: 带水源金刚石钻的专用要求 Safety of transportable motor-operated electric tools--Part 2: Particular requirements for diamond drills with water supply 
  可移式电动工具的安全 第二部分: 带水源金刚石锯的专用要求 Safety of transportable motor-operated electric tools--Part 2: Particular requirements for diamond saws with water supply 
  可移式电动工具的安全 第二部分: 斜切割机的专用要求 Safety of transportable motor-operated electric tools--Part 2: Particular requirements for mitre saws 
  可移式电动工具的安全 第二部分: 单轴立式木铣的专用要求 Safety of transportable motor-operated electric tools Part 2: Particular requirements for single spindle vertical moulders 
  可移式电动工具的安全 第二部分: 型材切割机的专用要求 Safety transportable motor-operated electric tools Part 2: Particular requirements for cutting-off grinders 
  可移式电动工具的安全 第二部分: 高压清洗机的专用要求 Safety of transportable motor-operated electric tools Part 2: Particular requirements for high pressure cleaners 
  轻工机械通用技术条件 General specifications for light industry machinery 
  点焊机器人通用技术条件 General specifications of spot-welding robots 
  工业机器人通用技术条件 Industrial robots--General specifications 
  可转位内孔车刀 Boring bars for indexable inserts 
  可转位螺旋立铣刀 Helical end milling cutters with indexable inserts 
  可转位螺旋沟浅孔钻 Spiral flute drill with indexable inserts 
  可转位直沟浅孔钻 Straight flute drill with indexable inserts 
  整体硬质合金锯片铣刀 Solid carbide slitting cutters 
  牛头刨床 精度 shaping machines--Testing of the accuracy 
  超精油石 Superfinishing stone 
  陶瓷结合剂强力珩磨油石 Vitrified force-honing stone 
  刚玉磨料中α-Al2O3相X射线定量测定方法 Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer 
  普通磨料精微粉(W3.5 - W0.5)粒度组成测定方法 Determination for grain size distribution of microgrits W3.5 to W0.5 of conventional abrasive 
  直柄粗加工立铣刀 型式与尺寸 Roughing end mill with parallel shank types and dimensions 
  削平型直柄粗加工立铣刀 型式与尺寸 Roughing end mill with flatted parallel shank types and dimensions 
  莫氏锥柄粗加工立铣刀 型式与尺寸 Roughing end mill with morse taper shank types and dimensions 
  粗加工立铣刀 技术条件 Roughing end mills technical specifications 
  平刀体键槽拉刀 型式与尺寸 Flat body keyway broach types and dimensions 
  加宽平刀体键槽拉刀 型式与尺寸 Widened flat body keyway broach types and dimensions 
  带倒角齿键槽拉刀 型式与尺寸 Keyway broach with chamfer types and dimensions 
  键槽拉刀通用技术条件 Technical specifications for keyway broaches 
  硬质合金机夹三面刃铣刀 Machanically clamped carbide side milling cutters 
  自动卷簧机 精度 Automatic spring winding machine--Testing of the accuracy 
  硬质合金喷吸钻 Ejector drills with carbide tips 
  盘形剃齿刀 Rotary gear shaving cutters 
  开式压力机 型式与基本参数 Open front mechanical power presses--Types and basic parameters 
  双圆弧齿轮滚刀 型式和尺寸 The basic types and dimensions of hobs for double--circular-arc gear 
  双圆弧齿轮滚刀 技术条件 The general technical specifications of hobs for double circular-arc gear 
  板料折弯机 精度 Press brake--Testing of the accuracy 
  剪板机 精度 Plate shear--Testing of the accuracy 
  工业机器人 圆形机械接口 Industrial robots--Circular mechanical interface 
  工业机器人 轴形机械接口 Industrial robots--Shaft mechanical interface 
  电喷枪 Electric spray guns 
  电磁吸盘 Electromagnetic chuck 
  单轴自动车床 精度 Single spindle automatic lathes--Testing of the accuracy 
  数控坐标镗床 精度 NC jig boring machine--Testing of the accuracy 
  可转位A型刀夹 Type A cartridges for indexable inserts 
  冲模技术条件 Specification of the press tools 
  塑封模具技术条件 Specification of plastic packaging mould 
  塑封模具尺寸公差规定 Dimensional tolerances stipulation of plastic packaging mould 
  焊缝无损检测符号 Nondestructive testing symbols for welds 
  手用钢锯条 Hand hacksaw blades 
  十字柄套筒扳手 Four-way socket wrenches 
  高频介质加热设备输出功率的测定方法 High-frequency dielectric heating installations-Test methods of the determination of power output 
  金属切削刀具术语 切齿刀具 Terms in metal cutting tools--Gear cutters 
  特种加工机床 术语 基本术语 Non-traditional machine tools--Terminology--Basic terminology 
  特种加工机床 术语 放电加工机床 Non-traditional machine tools--Terminology--Electro-discharge machine tools 
  特种加工机床 术语 电解加工机床 Non-traditional machine tools--Terminology--Electrolytic machine tools 
  特种加工机床 术语 超声加工机床 Non-traditional machine tools--Terminology--Ultrasonic machine tools 
  特种加工机床 术语 复合加工机床 Non-traditional machine tools--Terminology--Combined machining machine tools 
  特种加工机床 术语 其他特种加工机床 Non-traditional machine tools--Terminology--Other non-traditional machine tools 
  铝及铝合金阳极氧化 阳极氧化膜的封孔质量评定 磷-铬酸法 Anodizing of aluminium and its alloys--Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution 
  铝及铝合金阳极氧化 阳极氧化膜的封孔质量评定 酸浸法 Anodizing of aluminium and its alloys--Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution 
  铝及铝合金阳极氧化 着色阳极氧化膜色差和外观质量检验方法 目视观察法 Anodizing of aluminium and its alloys--Determination of color differences and appearance of colored anodic oxide films--Viewing method 
  点焊接头剪切拉伸疲劳试验方法 Test method for shear tensile fatigue of spot welded joints 
  涂附磨具 页状砂布砂纸 尺寸和公差 Coated abrasives--Abrasive sheets--Dimensions and tolerances 
  涂附磨具 卷状砂布 砂纸 尺寸和公差 Coated abrasives--Abrasive rolls--Dimensions and tolerances 
  涂附磨具 砂带 尺寸和公差 Coated abrasives--Abrasive belts--Dimensions and tolerances 
  涂附磨具 砂盘 尺寸和公差 Coated abrasives--Abrasive discs--Dimensions and tolerances 
  陶瓷可转位刀片 无孔刀片尺寸(G级) Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts without fixing hole(Class G) 
  陶瓷可转位刀片 带孔刀片尺寸 Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts with cylindrical fixing hole 
  陶瓷可转位刀片 无孔刀片尺寸(U级) Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Dimensions of inserts without fixing hole(Class U) 
  陶瓷可转位刀片 技术条件 Indexable inserts for cutting tools--Ceramic inserts with rounded corners--Specifications 
  可转位钻头用削平型直柄 Drills with indexable inserts--Cylindrical shanks with a parallel flat 
  制造业自动化 术语 Terminology of automation for manufacturing 
  金属切削机床 型号编制方法 Metal-cutting machine tools--Method of type designation 
  钢丝镀锌层 Zinc coatings for steel wire 
  塑料注射模大型模架 限位块 Injection mould for plastic large-size mould bases?Stop plates 
  电阻焊机的安全要求 Safety requirements for resistance welding machine 
  弧焊设备安全要求 第1部分:焊接电源 Safety requirements for arc welding equipment--Part 1: Welding power sources 
  弧焊设备安全要求 第11部分: 电焊钳 Safety requirements for are welding equipment Part 11: Electrode holders 
  弧焊设备安全要求 第12部分: 焊接电缆耦合装置 Safety requirements for arc welding equipment Part 12: Coupling devices for welding cables 
  真空金属镀层厚度测试方法 电阻法 Test method for vacuum-deposited metal thickness--Electric resistance method 
  扭力扳手通用技术条件 Torque wrench--General requirements 
  电讯夹扭钳和剪切钳通用技术条件 Pliers and nippers for electronics--General technical requirements 
  金属热处理生产过程安全卫生要求 Requirements for the safety and health in production process of metal heat treatment 
  正面角焊缝接头拉伸试验方法 Method of tension test for front fillet welded joint 
  金属切削机床安全防护通用技术条件 Metal-cutting machine tools--General safeguarding specification 
  金属覆盖层 延展性测量方法 Metallic coatings--Methods of measurement of ductility 
  锤上钢质自由锻件机械加工余量与公差一般要求 Machining allowances and tolerances for steel open die forgings on hammer--General reguirement 
  锤上钢质自由锻件机械加工余量与公差盘、柱类 Machining allowances and tolerances for steel open die forgings on hammer--Disks and columns 
  锤上钢质自由锻件机械加工余量与公差 带孔圆盘类 Machining allowances and tolerances for steel open die forgings on hammer--Disk swith holes 
  锤上钢质自由锻件机械加工余量与公差 圆环类 Machining allowances and tolerances for steel open die forgings on hammer--Rings 
  锤上钢质自由锻件机械加工余量与公差 套筒类 Machining allowances and tolerances for steel open die forgings on hammer--Seamles cylinder hushings 
  锤上钢质自由锻件机械加工余量与公差 光轴类 Machining allowances and tolerances for steel open die forgings on hammer--Shaft without steps 
  锤上钢质自由锻件机械加工余量与公差 台阶轴类 Machining allowances and tolerances for steel open die forgings on hammer--Shaft with steps 
  锤上钢质自由锻件机械加工余量与公差 单拐曲轴类 Machining allowances and tolerances for steel open dle forgings on hammer--Single throw crankshaft 
  锤上钢质自由锻件机械加工余量与公差 黑皮锻件 Machining allowances and tolerances for steel open die forgings on hammer--Forging without machining 
  离子镀 仿金氮化钛的颜色 Ion plating--Colour of golden TiN 
  软钎焊用钎剂 分类、标记与包装 Soldering fluxes--Classification, labelling and packaging 
  软钎焊用钎剂 树脂类钎剂 Soldering fluxes--Resin basis fluxes 
  软钎焊用钎剂 无机物类钎剂 Soldering fluxes--Inorganic fluxes 
  软钎焊用钎剂 有机物类钎剂 Soldering fluxes--Organic fluxes 
  钢制管道对接环焊缝超声波探伤方法和检验结果的分级 Methods of ultrasonic inspection and result classification of circumferential butt welds in steel pipes and tubes 
  可程控测量设备的标准数字接口 Standard digital interface for programmable instrumentation 
  电讯夹扭钳和剪切钳术语 Pliers and nippers for electronics--Nomenclature 
  锯床 安全防护技术要求 Sawing machines--Safeguarding specification 
  硬质合金螺旋齿立铣刀 第1部分:直柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 1: Dimensions of end mills with parallel shank 
  硬质合金螺旋齿立铣刀 第2部分: 7: 24锥柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 2: Dimensions of end mills with 7:24 taper shank 
  硬质合金螺旋齿立铣刀 第3部分: 莫氏锥柄立铣刀 型式和尺寸 End mills with brazed helical hardmetal tips--Part 3: Dimensions of end mills with morse taper shank 
  硬质合金螺旋齿立铣刀 第4部分: 技术条件 End mills with brazed helical hardmetal tips--Part 4: Technical specifications 
  超硬磨料制品 切割石材和建筑物用锯片 钢基体尺寸 Abrasive products--Segmented saws for machining of stone and masonry cutting--Dimensions of steel blades 
  磨料磨具术语 第1部分: 磨料术语 Terminologry for abrasives and abrasive products--Part 1: Terminology for abrasives 
  磨料磨具术语 第2部分: 磨具术语 Terminologry for abrasives and abrasive products--Part 2: Terminology for abrasives products 
  面铣刀寿命试验 Tool life testing in face milling 
  立铣刀寿命试验 Tool life testing in end milling 
  单刃车削刀具寿命试验 Tool-life testing with single-point turning tools 
  数控卧式车床 精度检验 Numerically controlled turning machines--Testing of the accuracy 
  工业窑炉用测温锥 Pyrometric reference cones for kilns use 
  计算机集成制造系统体系结构 Computer integrated manufacturing system architecture 
  工业自动化系统 集成制造系统安全的基本要求 Industrial automation systems--Safety of integrated manufacturing systems--Basic requirements 
  工业自动化系统和集成 产品数据表达与交换 第1部分: 概述与基本原理 Industrial automation systems and integration--Product data representation and exchange--Part 1: Overview and fundamental principles 
  工业自动化系统与集成 产品数据的表达与交换 第21部分: 实现方法: 交换文件结构的纯正文编码 Industrial automation systems and integration--Product data representation and exchange--Part 21: Implementation method:Clear text encoding of the exchange structure 
  工业自动化系统与集成 产品数据的表达与交换 第31部分: 一致性测试方法论与框架: 基本概念 Industrial automation systems and integration--Product data representation and exchange--Part 31: Conformance testing methodology and framework: General concepts 
  工业自动化系统与集成 产品数据的表达与交换 第32部分:一致性测试方法论与框架:对测试实验室和客户的要求 Industrial automation systems and integration--Product data representation and exchange--Part 32: Conformance testing methodology and framework: Requirements on testing laboratories and clients 
  工业自动化系统与集成 产品数据表达和交换 第41部分: 集成通用资源: 产品描述与支持原理 Industrial automation systems and integration--Product data representation and exchange--Part 41: Integrated generic resources: Fundamentals of product description and support 
  工业自动化系统和集成 产品数据表达与交换 第42部分; 集成通用资源: 几何与拓扑表达 Industrial automation systems and integration--Product data representation and exchange--Part 42: Integrated generic resources: Geometric and topological representation 
  工业自动化系统与集成 产品数据表达和交换 第43部分: 集成通用资源: 表达结构 Industrial automation systems and integration--Product data representation and exchange--Part 43: Integrated generic resources: Representation structures 
  工业自动化系统与集成 产品数据表达和交换 第44部分: 集成通用资源: 产品结构配置 Industrial automation systems and integration--Product data representation and exchange--Part 44: Integrated generic resources: Product structure configuration 
  工业自动化系统与集成产品数据表达与交换 第45部分: 集成通用资源: 材料 Industrial automation systems and integration Product data representation and exchange Part 45: Integrated generic resource: Materials 
  工业自动化系统和集成 产品数据表达与交换 第46部分 集成通用资源: 可视化显示 Industrial automation systems and integration--Product data representation and exchange--Part 46: Integrated generic resources: Visual presentation 
  工业自动化系统与集成产品数据表达与交换 第47部分: 集成资源: 形状变化公差 Industrial automation systems and integration--Product data representation and exchange--Part 47: Intergrated resources: Shape variation tolerances 
  工业自动化系统与集成 产品数据表达与交换 第101部分: 集成应用资源: 绘图 Industrial automation systems and integration--Product data representation and exchange--Part 101: Integrated application resources: draughting 
  工业自动化系统与集成 产品数据表达与交换 第105部分: 集成应用资源: 运动学 Industrial automation systems and integration--Product data representation and exchange--Part 105:Integrated application resource:Kinematics 
  工业自动化系统与集成 产品数据表达与交换 第201部分 应用协议: 显式绘图 Industrial automation systems and integration--Product data representation and exchange Part 201: Application protocol: Explicit draughting 
  工业自动化系统与集成产品数据的表达与交换 第202部分: 应用协议: 相关绘图 Industrial automation systems and integration--Product data representation and exchange--Part 202: Application protocol: Associative draughting 
  工业自动化系统与集成 产品数据的表达与交换 第203部分: 应用协议: 配置控制设计 Industrial automation systems and integration--Product data representation and exchange--Part 203: Application protocol: Configuration controlled design 
  工业控制系统用现场总线 第2部分:物理层规范和服务定义 Fieldbus standard for use in industrial control system--Part 2: Physical layer specification and service definition 
  焊缝 工作位置 倾角和转角的定义 Welds--Working positions--Definitions of angles of slope and rotation 
  工业自动化系统 制造报文规范 第一部分:服务定义 Industrial automation systems--Manufacturing message specification--Part 1: Service definition 
  工业自动化系统 制造报文规范 第2部分:协议规范 Industrial automation systems--Manufacturing message specification--Part 2: Protocol specification 
  工业自动化系统 制造报文规范 第三部分:机器人伴同标准 Industrial automation systems--Manufacturing message specification--Part 3: Companion standard for robotics 
  工业自动化系统 制造报文规范 第4部分: 数值控制用伴同标准 Industrial automation systems--Manufacturing message specification--Part 4: Companion standard for numerical control 
  工业自动化系统 制造报文规范 协议子集规范 Industrial automation systems--Specification of subsets of the protocol for the manufacturing--Message specification 
  冲裁间隙 Blanking clearance 
  热喷涂 自熔合金涂层 Thermal spraying--Self-fluxing alloy coatings 
  金属覆盖层产品钎焊性的标准试验方法 Standard test method for solderability of metallic-coated products 
  金属切削机床 振动测量方法 Metal-cutting machine tools--Measurement method for vibration 
  金属切削机床 噪声声压级测量方法 Metal-cutting machine tools--Measurement method of sound pressure level 
  整体硬质合金直柄立铣刀 第1部分: 型式与尺寸 Solid hardmetal end mills with parallel shank Part 1: Dimensions 
  整体硬质合金直柄立铣刀 第2部分:技术规范 Solid hardmetal end mills with parallel shank Part 2: Technical specifications 
  金属覆盖层 厚度测量 X射线光谱方法 Measurement of metallic coating thickness-X--ray spectrometric methods 
  钢件的正火与退火 Normalizing and annealing of steel parts 
  钢件的淬火与回火 Quenching and tempering of steel parts 
  复合钢板焊接接头力学性能试验方法 Mechanical tests on welded joints in clad plates 
  工业机器人 坐标系和运动命名原则 Industrial robots--Coordinate systems and motion nomenclature 
  工业自动化 词汇 Industrial automation glossary&, nbsp;
  工业自动化系统 制造报文规范 第1部分: 服务定义 补充件1: 数据交换 Industrial automation systems--Manufacturing message specification--Part 1: Service definition AMENDMENT 1: Data exchange 
  工业自动化系统 制造报文规范(MMS) 第2部分: 协议规范 补充件1: 数据交换 Industrial automation systems--Manufacturing message specification--Part 2: Protocol specification AMENDMEN 1: Data exchange 
  工业自动化 车间生产 第1部分: 标准化参考模型和确定需求的方法论 Industrial automation--Shop floor production--Part 1: Reference model for standardization and a methodology for identification of requirements 
  工业自动化 车间生产 第2部分: 标准化参考模型和方法论的应用 Industrial automation--Shop floor production--Part 2: Application of the reference model for standardization and methodology 
  切削刀具--高速钢分组代号 Cutting tools--Designation of high-speed steel groups 
  定心钻 Spot drills 
  锻压机械 安全技术条件 Metalforming machinery--Safety requirements 
  机床 控制装置的操作方向 Machine tools--Direction of operation of controls 
  机床 速度和进给量 Machine tools--Speeds and feeds 
  模糊控制装置和系统 第1部分: 基本术语 Fuzzy control devices and systems--Part 1: Fundamental terminology 
  模糊控制装置和系统 第2部分: 模糊控制单元性能检测一般要求 Fuzzy control devices and systems-Part 2: General requirements for evaluating performance of fuzzy control unit 
  模糊控制装置和系统 第3部分: 可编程控制器 模糊控制编程 Fuzzy control devices and systems Part 3: Programmable controllers-fuzzy control programming 
  模糊控制装置和系统 第4部分: 洗衣机模糊控制基本性能检测要求 Fuzzy control devices and systems-Part 4: Evaluation requirements of basic properties of fuzzy control for washing machine 
  工业炉名词术语 Industrial furnace terminology 
  工业过程测量和控制 术语和定义 Industrial-process measurement and control--Terms and definitions 
  工业过程测量和控制装置工作条件 第1部分: 气候条件 Industrial-process measurement and control equipment--Operating conditions Part 1: Climatic conditions 
  工业过程测量和控制装置的工作条件 第3部分: 机械影响 Operating conditions for industrial-process measurement and control equipment Part 3: Mechanical influences 
  有机热载体炉 Organic heat transfer material heaters 
  机床检验通则 第1部分: 在无负荷或精加工条件下机床的几何精度 Test code for machine tools--Part 1: Geometric accuracy of machines operating under no-load or finishing conditions 
  机床检验通则 第2部分: 数控轴线的定位精度和重复定位精度的确定 Test code for machine tools--Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes 
  化学转化膜 铝及铝合金上漂洗和不漂洗铬酸盐转化膜 Chemical conversion coatings Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys 
  金属覆盖层 锡--铅合金电镀层 Metallic coatings--Electroplated coatings of tin-lead alloys 
  金属覆盖层 锡--镍合金电镀层 Metallic coatings--Electroplated coatings of tin-nickel alloys 
  低合金钢药芯焊丝 Low alloy steel flux cored electrodes for arc welding 
  滚珠丝杠副 第1部分: 术语和符号 Ball screws--Part 1: Vocabulary and designation 
  滚珠丝杠副 第2部分: 公称直径和公称导程 公制系列 Ball screws--Part 2: Nominal diameters and nominal leads--Metric series 
  滚珠丝杠副 第3部分: 验收条件和验收检验 Ball screws--Part 3: Acceptance conditions and acceptance tests 
  工业自动化系统与集成 零件库 第1部分: 综述与基本原理 Industrial automation systems and integration Parts library Part 1: Overview and fundamental principles 
  金属覆盖层 孔隙率试验评述 Metallic coatings--Review of porosity tests 
  金属覆盖层 孔隙率试验 铁试剂试验 Metallic coatings--Porosity tests--Ferroxyl test 
  不锈钢药芯焊丝 Stainless steel flux cored wires 
  埋弧焊用不锈钢焊丝和焊剂 Stainless steel electrodes and fluxs for submerged arc welding 
  工业机器人 末端执行器自动更换系统 词汇和特性表示 Industrial robots--Automatic end effector exchange systems--Vocabulary and presentation of characteristics 
  手持式市电供电圆锯性能测量方法 Hand-held electric mains voltage operated circular saws-Methods for measuring the performance 
  手持式市电供电喷枪的性能要求 Hand-held electric mains voltage operated spray guns-Performance requirements 
  带断屑槽可转位刀片近似切屑控制区的分类和代号 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers 
  麻花钻 技术条件 Twist drills--Technical specifications 
  硬质合金车刀 第1部分: 代号及标志 Turning tools with carbide tips Part 1: Designation and marking 
  硬质合金车刀 第2部分: 外表面车刀 Turning tools with carbide tips Part 2: External tools 
  硬质合金车刀 第3部分: 内表面车刀 Turning tools with carbide tips Part 3: Internal tools 
  钢件的气体渗氮 Gas nitriding of steel parts 
  水性涂料涂装体系选择通则 General rules of the selection for painting system of water paint 
  金属覆盖层 孔隙率试验 潮湿硫(硫华)试验 Metallic coatings--Porosity tests--Humid sulfur(flowers of sulfur) test 
  高速公路交通工程钢构件防腐技术条件 Specification for steel component anticorrosion of highway traffic engineering appurtenances 
  过程测量和控制装置--通用性能评定方法和程序 第1部分: 总则 Process measurement and control devices--General methods and procedures for evaluating performance--Part 1: General considerations 
  过程测量和控制装置--通用性能评定方法和程序 第2部分: 参比条件下的试验 Process measurement and control devices--General methods and procedures for evaluating performance--Part 2: Tests under reference conditions 
  过程测量和控制装置--通用性能评定方法和程序 第3部分: 影响量影响的试验 Process measurement and control devices--General methods and procedures for evaluating performance--Part 3: Tests for the effects of influence quantities 
  过程测量和控制装置--通用性能评定方法和程序 第4部分: 评定报告的内容 Process measurement and control devices--General methods and procedures for evaluating performance--Part 4: Evaluation report content 
  工业过程测量和控制--系统评估中系统特性的评定 第1部分: 总则和方法学 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 1: General consideration and methodology 
  工业过程测量和控制--系统评估中系统特性的评定 第2部分: 评估方法学 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 2: Assessment methodology 
  工业过程测量和控制--系统评估中系统特性的评定 第3部分: 系统功能性评估 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 3: Assessment of system functionality 
  工业过程测量和控制--系统评估中系统特性的评定 第5部分: 系统可信性评估 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 5: Assessment of system dependability 
  加工中心 检验条件 第6部分:进给率、速度和插补精度检验 Test conditions for machining centres--Part 6: Accuracy of feeds, speeds and interpolations 


  更多文章